Skip to content

L
linux
Commit b27186ab authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 

Pull Devicetree updates from Rob Herring:
 "A bit bigger than normal as I've been busy this cycle.

  There's a few things with dependencies and a few things subsystem
  maintainers didn't pick up, so I'm taking them thru my tree.

  The fixes from Johan didn't get into linux-next, but they've been
  waiting for some time now and they are what's left of what subsystem
  maintainers didn't pick up.

  Summary:

   - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4

   - Work to get rid of direct accesses to struct device_node name and
     type pointers in preparation for removing them. New helpers for
     parsing DT cpu nodes and conversions to use the helpers. printk
     conversions to %pOFn for printing DT node names. Most went thru
     subystem trees, so this is the remainder.

   - Fixes to DT child node lookups to actually be restricted to child
     nodes instead of treewide.

   - Refactoring of dtb targets out of arch code. This makes the support
     more uniform and enables building all dtbs on c6x, microblaze, and
     powerpc.

   - Various DT binding updates for Renesas r8a7744 SoC

   - Vendor prefixes for Facebook, OLPC

   - Restructuring of some ARM binding docs moving some peripheral
     bindings out of board/SoC binding files

   - New "secure-chosen" binding for secure world settings on ARM

   - Dual licensing of 2 DT IRQ binding headers"

* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  ARM: dt: relicense two DT binding IRQ headers
  power: supply: twl4030-charger: fix OF sibling-node lookup
  NFC: nfcmrvl_uart: fix OF child-node lookup
  net: stmmac: dwmac-sun8i: fix OF child-node lookup
  net: bcmgenet: fix OF child-node lookup
  drm/msm: fix OF child-node lookup
  drm/mediatek: fix OF sibling-node lookup
  of: Add missing exports of node name compare functions
  dt-bindings: Add OLPC vendor prefix
  dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
  dt-bindings: thermal: samsung: Add SPDX license identifier
  dt-bindings: clock: samsung: Add SPDX license identifiers
  dt-bindings: timer: ostm: Add R7S9210 support
  dt-bindings: phy: rcar-gen2: Add r8a7744 support
  dt-bindings: can: rcar_can: Add r8a7744 support
  dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
  dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  Documentation: dt: Add binding for /secure-chosen/stdout-path
  dt-bindings: arm: zte: Move sysctrl bindings to their own doc
  ...
parents 0ef7791e d061864b
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1736 additions and 1043 deletions
Documentation/devicetree/bindings/arm/al,alpine.txt
View file @ b27186ab
......@@ -14,75 +14,3 @@ compatible: must contain "al,alpine"
...
}
* CPU node:
The Alpine platform includes cortex-a15 cores.
enable-method: must be "al,alpine-smp" to allow smp [1]
Example:
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "al,alpine-smp";
cpu@0 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <3>;
};
};
* Alpine CPU resume registers
The CPU resume register are used to define required resume address after
reset.
Properties:
- compatible : Should contain "al,alpine-cpu-resume".
- reg : Offset and length of the register set for the device
Example:
cpu_resume {
compatible = "al,alpine-cpu-resume";
reg = <0xfbff5ed0 0x30>;
};
* Alpine System-Fabric Service Registers
The System-Fabric Service Registers allow various operation on CPU and
system fabric, like powering CPUs off.
Properties:
- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
- reg : Offset and length of the register set for the device
Example:
nb_service {
compatible = "al,alpine-sysfabric-service", "syscon";
reg = <0xfb070000 0x10000>;
};
[1] arm/cpu-enable-method/al,alpine-smp
Documentation/devicetree/bindings/arm/atmel-at91.txt
View file @ b27186ab
......@@ -70,173 +70,3 @@ compatible: must be one of:
- "atmel,samv71q19"
- "atmel,samv71q20"
- "atmel,samv71q21"
Chipid required properties:
- compatible: Should be "atmel,sama5d2-chipid"
- reg : Should contain registers location and length
PIT Timer required properties:
- compatible: Should be "atmel,at91sam9260-pit"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the PIT which is the IRQ line
shared across all System Controller members.
System Timer (ST) required properties:
- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the ST which is the IRQ line
shared across all System Controller members.
- clocks: phandle to input clock.
Its subnodes can be:
- watchdog: compatible should be "atmel,at91rm9200-wdt"
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
<chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
- reg: Should contain registers location and length
- clocks: phandle to input clock.
Example:
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
clocks = <&clk32k>;
};
RAMC SDRAM/DDR Controller required properties:
- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
"atmel,at91sam9260-sdramc",
"atmel,at91sam9g45-ddramc",
"atmel,sama5d3-ddramc",
- reg: Should contain registers location and length
Examples:
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
};
SHDWC Shutdown Controller
required properties:
- compatible: Should be "atmel,<chip>-shdwc".
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
- reg: Should contain registers location and length
- clocks: phandle to input clock.
optional properties:
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
Supported values are: "none", "high", "low", "any".
- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
optional at91sam9260 properties:
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
optional at91sam9rl properties:
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
optional at91sam9x5 properties:
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
Example:
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
clocks = <&clk32k>;
};
SHDWC SAMA5D2-Compatible Shutdown Controller
1) shdwc node
required properties:
- compatible: should be "atmel,sama5d2-shdwc".
- reg: should contain registers location and length
- clocks: phandle to input clock.
- #address-cells: should be one. The cell is the wake-up input index.
- #size-cells: should be zero.
optional properties:
- debounce-delay-us: minimum wake-up inputs debouncer period in
microseconds. It's usually a board-related property.
- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
The node contains child nodes for each wake-up input that the platform uses.
2) input nodes
Wake-up input nodes are usually described in the "board" part of the Device
Tree. Note also that input 0 is linked to the wake-up pin and is frequently
used.
Required properties:
- reg: should contain the wake-up input index [0 - 15].
Optional properties:
- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
by the child, forces the wake-up of the core power supply on a high level.
The default is to be active low.
Example:
On the SoC side:
shdwc@f8048010 {
compatible = "atmel,sama5d2-shdwc";
reg = <0xf8048010 0x10>;
clocks = <&clk32k>;
#address-cells = <1>;
#size-cells = <0>;
atmel,wakeup-rtc-timer;
};
On the board side:
shdwc@f8048010 {
debounce-delay-us = <976>;
input@0 {
reg = <0>;
};
input@1 {
reg = <1>;
atmel,wakeup-active-high;
};
};
Special Function Registers (SFR)
Special Function Registers (SFR) manage specific aspects of the integrated
memory, bridge implementations, processor and other functionality not controlled
elsewhere.
required properties:
- compatible: Should be "atmel,<chip>-sfr", "syscon" or
"atmel,<chip>-sfrbu", "syscon"
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
- reg: Should contain registers location and length
sfr@f0038000 {
compatible = "atmel,sama5d3-sfr", "syscon";
reg = <0xf0038000 0x60>;
};
Security Module (SECUMOD)
The Security Module macrocell provides all necessary secure functions to avoid
voltage, temperature, frequency and mechanical attacks on the chip. It also
embeds secure memories that can be scrambled
required properties:
- compatible: Should be "atmel,<chip>-secumod", "syscon".
<chip> can be "sama5d2".
- reg: Should contain registers location and length
secumod@fc040000 {
compatible = "atmel,sama5d2-secumod", "syscon";
reg = <0xfc040000 0x100>;
};
Documentation/devicetree/bindings/arm/atmel-sysregs.txt 0 → 100644
View file @ b27186ab
Atmel system registers
Chipid required properties:
- compatible: Should be "atmel,sama5d2-chipid"
- reg : Should contain registers location and length
PIT Timer required properties:
- compatible: Should be "atmel,at91sam9260-pit"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the PIT which is the IRQ line
shared across all System Controller members.
System Timer (ST) required properties:
- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the ST which is the IRQ line
shared across all System Controller members.
- clocks: phandle to input clock.
Its subnodes can be:
- watchdog: compatible should be "atmel,at91rm9200-wdt"
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
<chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
- reg: Should contain registers location and length
- clocks: phandle to input clock.
Example:
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
clocks = <&clk32k>;
};
RAMC SDRAM/DDR Controller required properties:
- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
"atmel,at91sam9260-sdramc",
"atmel,at91sam9g45-ddramc",
"atmel,sama5d3-ddramc",
- reg: Should contain registers location and length
Examples:
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
};
SHDWC Shutdown Controller
required properties:
- compatible: Should be "atmel,<chip>-shdwc".
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
- reg: Should contain registers location and length
- clocks: phandle to input clock.
optional properties:
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
Supported values are: "none", "high", "low", "any".
- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
optional at91sam9260 properties:
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
optional at91sam9rl properties:
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
optional at91sam9x5 properties:
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
Example:
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
clocks = <&clk32k>;
};
SHDWC SAMA5D2-Compatible Shutdown Controller
1) shdwc node
required properties:
- compatible: should be "atmel,sama5d2-shdwc".
- reg: should contain registers location and length
- clocks: phandle to input clock.
- #address-cells: should be one. The cell is the wake-up input index.
- #size-cells: should be zero.
optional properties:
- debounce-delay-us: minimum wake-up inputs debouncer period in
microseconds. It's usually a board-related property.
- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
The node contains child nodes for each wake-up input that the platform uses.
2) input nodes
Wake-up input nodes are usually described in the "board" part of the Device
Tree. Note also that input 0 is linked to the wake-up pin and is frequently
used.
Required properties:
- reg: should contain the wake-up input index [0 - 15].
Optional properties:
- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
by the child, forces the wake-up of the core power supply on a high level.
The default is to be active low.
Example:
On the SoC side:
shdwc@f8048010 {
compatible = "atmel,sama5d2-shdwc";
reg = <0xf8048010 0x10>;
clocks = <&clk32k>;
#address-cells = <1>;
#size-cells = <0>;
atmel,wakeup-rtc-timer;
};
On the board side:
shdwc@f8048010 {
debounce-delay-us = <976>;
input@0 {
reg = <0>;
};
input@1 {
reg = <1>;
atmel,wakeup-active-high;
};
};
Special Function Registers (SFR)
Special Function Registers (SFR) manage specific aspects of the integrated
memory, bridge implementations, processor and other functionality not controlled
elsewhere.
required properties:
- compatible: Should be "atmel,<chip>-sfr", "syscon" or
"atmel,<chip>-sfrbu", "syscon"
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
- reg: Should contain registers location and length
sfr@f0038000 {
compatible = "atmel,sama5d3-sfr", "syscon";
reg = <0xf0038000 0x60>;
};
Security Module (SECUMOD)
The Security Module macrocell provides all necessary secure functions to avoid
voltage, temperature, frequency and mechanical attacks on the chip. It also
embeds secure memories that can be scrambled
required properties:
- compatible: Should be "atmel,<chip>-secumod", "syscon".
<chip> can be "sama5d2".
- reg: Should contain registers location and length
secumod@fc040000 {
compatible = "atmel,sama5d2-secumod", "syscon";
reg = <0xfc040000 0x100>;
};
Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
View file @ b27186ab
......@@ -14,7 +14,28 @@ Related properties: (none)
Note:
This enable method requires valid nodes compatible with
"al,alpine-cpu-resume" and "al,alpine-nb-service"[1].
"al,alpine-cpu-resume" and "al,alpine-nb-service".
* Alpine CPU resume registers
The CPU resume register are used to define required resume address after
reset.
Properties:
- compatible : Should contain "al,alpine-cpu-resume".
- reg : Offset and length of the register set for the device
* Alpine System-Fabric Service Registers
The System-Fabric Service Registers allow various operation on CPU and
system fabric, like powering CPUs off.
Properties:
- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
- reg : Offset and length of the register set for the device
Example:
......@@ -48,5 +69,12 @@ cpus {
};
};
--
[1] arm/al,alpine.txt
cpu_resume {
compatible = "al,alpine-cpu-resume";
reg = <0xfbff5ed0 0x30>;
};
nb_service {
compatible = "al,alpine-sysfabric-service", "syscon";
reg = <0xfb070000 0x10000>;
};
Documentation/devicetree/bindings/arm/cpus.txt
View file @ b27186ab
......@@ -276,7 +276,7 @@ described below.
Usage: optional
Value type: <prop-encoded-array>
Definition: A u32 value that represents the running time dynamic
power coefficient in units of mW/MHz/uV^2. The
power coefficient in units of uW/MHz/V^2. The
coefficient can either be calculated from power
measurements or derived by analysis.
......@@ -287,7 +287,7 @@ described below.
Pdyn = dynamic-power-coefficient * V^2 * f
where voltage is in uV, frequency is in MHz.
where voltage is in V, frequency is in MHz.
Example 1 (dual-cluster big.LITTLE system 32-bit):
......
Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt 0 → 100644
View file @ b27186ab
Freescale DCFG
DCFG is the device configuration unit, that provides general purpose
configuration and status for the device. Such as setting the secondary
core start address and release the secondary core from holdoff and startup.
Required properties:
- compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-dcfg",
The following <chip>s are known to be supported:
ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
- reg : should contain base address and length of DCFG memory-mapped registers
Example:
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg";
reg = <0x0 0x1ee0000 0x0 0x10000>;
};
Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt 0 → 100644
View file @ b27186ab
Freescale SCFG
SCFG is the supplemental configuration unit, that provides SoC specific
configuration and status registers for the chip. Such as getting PEX port
status.
Required properties:
- compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-scfg",
The following <chip>s are known to be supported:
ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
- reg: should contain base address and length of SCFG memory-mapped registers
Example:
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg";
reg = <0x0 0x1570000 0x0 0x10000>;
};
Documentation/devicetree/bindings/arm/fsl.txt
View file @ b27186ab
......@@ -101,45 +101,6 @@ Freescale LS1021A Platform Device Tree Bindings
Required root node compatible properties:
- compatible = "fsl,ls1021a";
Freescale SoC-specific Device Tree Bindings
-------------------------------------------
Freescale SCFG
SCFG is the supplemental configuration unit, that provides SoC specific
configuration and status registers for the chip. Such as getting PEX port
status.
Required properties:
- compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-scfg",
The following <chip>s are known to be supported:
ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
- reg: should contain base address and length of SCFG memory-mapped registers
Example:
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg";
reg = <0x0 0x1570000 0x0 0x10000>;
};
Freescale DCFG
DCFG is the device configuration unit, that provides general purpose
configuration and status for the device. Such as setting the secondary
core start address and release the secondary core from holdoff and startup.
Required properties:
- compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-dcfg",
The following <chip>s are known to be supported:
ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
- reg : should contain base address and length of DCFG memory-mapped registers
Example:
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg";
reg = <0x0 0x1ee0000 0x0 0x10000>;
};
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
----------------------------------------------------------------
......
Documentation/devicetree/bindings/arm/secure.txt
View file @ b27186ab
......@@ -32,7 +32,8 @@ describe the view of Secure world using the standard bindings. These
secure- bindings only need to be used where both the Secure and Normal
world views need to be described in a single device tree.
Valid Secure world properties:
Valid Secure world properties
-----------------------------
- secure-status : specifies whether the device is present and usable
in the secure world. The combination of this with "status" allows
......@@ -51,3 +52,19 @@ Valid Secure world properties:
status = "disabled"; secure-status = "okay"; /* S-only */
status = "disabled"; /* disabled in both */
status = "disabled"; secure-status = "disabled"; /* disabled in both */
The secure-chosen node
----------------------
Similar to the /chosen node which serves as a place for passing data
between firmware and the operating system, the /secure-chosen node may
be used to pass data to the Secure OS. Only the properties defined
below may appear in the /secure-chosen node.
- stdout-path : specifies the device to be used by the Secure OS for
its console output. The syntax is the same as for /chosen/stdout-path.
If the /secure-chosen node exists but the stdout-path property is not
present, the Secure OS should not perform any console output. If
/secure-chosen does not exist, the Secure OS should use the value of
/chosen/stdout-path instead (that is, use the same device as the
Normal world OS).
Documentation/devicetree/bindings/arm/zte,sysctrl.txt 0 → 100644
View file @ b27186ab
ZTE sysctrl Registers
Registers for 'zte,zx296702' SoC:
System management required properties:
- compatible = "zte,sysctrl"
Low power management required properties:
- compatible = "zte,zx296702-pcu"
Bus matrix required properties:
- compatible = "zte,zx-bus-matrix"
Registers for 'zte,zx296718' SoC:
System management required properties:
- compatible = "zte,zx296718-aon-sysctrl"
- compatible = "zte,zx296718-sysctrl"
Example:
aon_sysctrl: aon-sysctrl@116000 {
compatible = "zte,zx296718-aon-sysctrl", "syscon";
reg = <0x116000 0x1000>;
};
sysctrl: sysctrl@1463000 {
compatible = "zte,zx296718-sysctrl", "syscon";
reg = <0x1463000 0x1000>;
};
Documentation/devicetree/bindings/arm/zte.txt
View file @ b27186ab
ZTE platforms device tree bindings
---------------------------------------
---------------------------------------
- ZX296702 board:
Required root node properties:
- compatible = "zte,zx296702-ad1", "zte,zx296702"
System management required properties:
- compatible = "zte,sysctrl"
Low power management required properties:
- compatible = "zte,zx296702-pcu"
Bus matrix required properties:
- compatible = "zte,zx-bus-matrix"
---------------------------------------
- ZX296718 SoC:
Required root node properties:
......@@ -22,18 +12,3 @@ Bus matrix required properties:
ZX296718 EVB board:
- "zte,zx296718-evb"
System management required properties:
- compatible = "zte,zx296718-aon-sysctrl"
- compatible = "zte,zx296718-sysctrl"
Example:
aon_sysctrl: aon-sysctrl@116000 {
compatible = "zte,zx296718-aon-sysctrl", "syscon";
reg = <0x116000 0x1000>;
};
sysctrl: sysctrl@1463000 {
compatible = "zte,zx296718-sysctrl", "syscon";
reg = <0x1463000 0x1000>;
};
Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
View file @ b27186ab
......@@ -24,7 +24,7 @@ Optional properties:
Example:
p1_sec_a: crypto@400,d2000000 {
p1_sec_a: crypto@400d2000000 {
compatible = "hisilicon,hip07-sec";
reg = <0x400 0xd0000000 0x0 0x10000
0x400 0xd2000000 0x0 0x10000
......
Documentation/devicetree/bindings/fpga/fpga-region.txt
View file @ b27186ab
......@@ -415,7 +415,7 @@ DT Overlay contains:
firmware-name = "base.rbf";
fpga-bridge@4400 {
compatible = "altr,freeze-bridge";
compatible = "altr,freeze-bridge-controller";
reg = <0x4400 0x10>;
fpga_region1: fpga-region1 {
......@@ -427,7 +427,7 @@ DT Overlay contains:
};
fpga-bridge@4420 {
compatible = "altr,freeze-bridge";
compatible = "altr,freeze-bridge-controller";
reg = <0x4420 0x10>;
fpga_region2: fpga-region2 {
......
Documentation/devicetree/bindings/i2c/i2c.txt
View file @ b27186ab
......@@ -84,7 +84,7 @@ Binding may contain optional "interrupts" property, describing interrupts
used by the device. I2C core will assign "irq" interrupt (or the very first
interrupt if not using interrupt names) as primary interrupt for the slave.
Alternatively, devices supporting SMbus Host Notify, and connected to
Alternatively, devices supporting SMBus Host Notify, and connected to
adapters that support this feature, may use "host-notify" property. I2C
core will create a virtual interrupt for Host Notify and assign it as
primary interrupt for the slave.
......
Documentation/devicetree/bindings/mfd/arizona.txt
View file @ b27186ab
......@@ -76,7 +76,7 @@ Deprecated properties:
Also see child specific device properties:
Regulator - ../regulator/arizona-regulator.txt
Extcon - ../extcon/extcon-arizona.txt
Sound - ../sound/arizona.txt
Sound - ../sound/wlf,arizona.txt
Example:
......
Documentation/devicetree/bindings/misc/lwn-bk4.txt 0 → 100644
View file @ b27186ab
* Liebherr's BK4 controller external SPI
A device which handles data acquisition from compatible industrial
peripherals.
The SPI is used for data and management purposes in both master and
slave modes.
Required properties:
- compatible : Should be "lwn,bk4"
Required SPI properties:
- reg : Should be address of the device chip select within
the controller.
- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be
30MHz at most for the Liebherr's BK4 external bus.
Example:
spidev0: spi@0 {
compatible = "lwn,bk4";
spi-max-frequency = <30000000>;
reg = <0>;
};
Documentation/devicetree/bindings/net/can/rcar_can.txt
View file @ b27186ab
......@@ -3,6 +3,7 @@ Renesas R-Car CAN controller Device Tree Bindings
Required properties:
- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
"renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
......
Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
View file @ b27186ab
......@@ -5,6 +5,7 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
"renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
"renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
"renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
......
Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
View file @ b27186ab
......@@ -5,7 +5,7 @@ Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be "fsl,imx7-src", "syscon"
- compatible: Should be "fsl,imx7d-src", "syscon"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt
......
Documentation/devicetree/bindings/timer/renesas,cmt.txt
View file @ b27186ab
......@@ -24,6 +24,8 @@ Required Properties:
- "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
- "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
- "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
- "renesas,r8a7744-cmt0" for the 32-bit CMT0 device included in r8a7744.
- "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744.
- "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
- "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
- "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
......
Documentation/devicetree/bindings/timer/renesas,ostm.txt
View file @ b27186ab
......@@ -9,7 +9,8 @@ Channels are independent from each other.
Required Properties:
- compatible: must be one or more of the following:
- "renesas,r7s72100-ostm" for the r7s72100 OSTM
- "renesas,r7s72100-ostm" for the R7S72100 (RZ/A1) OSTM
- "renesas,r7s9210-ostm" for the R7S9210 (RZ/A2) OSTM
- "renesas,ostm" for any OSTM
This is a fallback for the above renesas,*-ostm entries
......
Documentation/devicetree/bindings/vendor-prefixes.txt
View file @ b27186ab
......@@ -127,6 +127,7 @@ everspin Everspin Technologies, Inc.
exar Exar Corporation
excito Excito
ezchip EZchip Semiconductor
facebook Facebook
fairphone Fairphone B.V.
faraday Faraday Technology Corporation
fastrax Fastrax Oy
......@@ -275,6 +276,7 @@ nxp NXP Semiconductors
okaya Okaya Electric America, Inc.
oki Oki Electric Industry Co., Ltd.
olimex OLIMEX Ltd.
olpc One Laptop Per Child
onion Onion Corporation
onnn ON Semiconductor Corp.
ontat On Tat Industrial Company
......
Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
View file @ b27186ab
......@@ -6,6 +6,7 @@ Required properties:
version.
Examples with soctypes are:
- "renesas,r8a7743-wdt" (RZ/G1M)
- "renesas,r8a7744-wdt" (RZ/G1N)
- "renesas,r8a7745-wdt" (RZ/G1E)
- "renesas,r8a774a1-wdt" (RZ/G2M)
- "renesas,r8a7790-wdt" (R-Car H2)
......
Makefile
View file @ b27186ab
......@@ -1063,7 +1063,7 @@ include/config/kernel.release: $(srctree)/Makefile FORCE
# Carefully list dependencies so we do not try to build scripts twice
# in parallel
PHONY += scripts
scripts: scripts_basic asm-generic gcc-plugins $(autoksyms_h)
scripts: scripts_basic scripts_dtc asm-generic gcc-plugins $(autoksyms_h)
$(Q)$(MAKE) $(build)=$(@)
# Things we need to do before we recursively start building the kernel
......@@ -1212,6 +1212,35 @@ kselftest-merge:
$(srctree)/tools/testing/selftests/*/config
+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
# ---------------------------------------------------------------------------
# Devicetree files
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
dtstree := arch/$(SRCARCH)/boot/dts
endif
ifneq ($(dtstree),)
%.dtb: prepare3 scripts_dtc
$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
PHONY += dtbs dtbs_install
dtbs: prepare3 scripts_dtc
$(Q)$(MAKE) $(build)=$(dtstree)
dtbs_install:
$(Q)$(MAKE) $(dtbinst)=$(dtstree)
ifdef CONFIG_OF_EARLY_FLATTREE
all: dtbs
endif
endif
PHONY += scripts_dtc
scripts_dtc: scripts_basic
$(Q)$(MAKE) $(build)=scripts/dtc
# ---------------------------------------------------------------------------
# Modules
......@@ -1421,6 +1450,12 @@ help:
@echo ' kselftest-merge - Merge all the config dependencies of kselftest to existing'
@echo ' .config.'
@echo ''
@$(if $(dtstree), \
echo 'Devicetree:'; \
echo '* dtbs - Build device tree blobs for enabled boards'; \
echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \
echo '')
@echo 'Userspace tools targets:'
@echo ' use "make tools/help"'
@echo ' or "cd tools; make help"'
......
arch/arc/Makefile
View file @ b27186ab
......@@ -102,11 +102,5 @@ boot_targets += uImage uImage.bin uImage.gz
$(boot_targets): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
%.dtb %.dtb.S %.dtb.o: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
arch/arm/Makefile
View file @ b27186ab
......@@ -303,12 +303,7 @@ else
KBUILD_IMAGE := $(boot)/zImage
endif
# Build the DT binary blobs if we have OF configured
ifeq ($(CONFIG_USE_OF),y)
KBUILD_DTBS := dtbs
endif
all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS)
all: $(notdir $(KBUILD_IMAGE))
archheaders:
......@@ -335,17 +330,6 @@ $(BOOT_TARGETS): vmlinux
$(INSTALL_TARGETS):
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
%.dtb: | scripts
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
PHONY += dtbs dtbs_install
dtbs: prepare scripts
$(Q)$(MAKE) $(build)=$(boot)/dts
dtbs_install:
$(Q)$(MAKE) $(dtbinst)=$(boot)/dts
PHONY += vdso_install
vdso_install:
ifeq ($(CONFIG_VDSO),y)
......@@ -367,8 +351,6 @@ define archhelp
echo ' uImage - U-Boot wrapped zImage'
echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
echo '* dtbs - Build device tree blobs for enabled boards'
echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' uinstall - Install U-Boot wrapped compressed kernel'
......
arch/arm/boot/compressed/libfdt_env.h
View file @ b27186ab
......@@ -6,6 +6,8 @@
#include <linux/string.h>
#include <asm/byteorder.h>
#define INT_MAX ((int)(~0U>>1))
typedef __be16 fdt16_t;
typedef __be32 fdt32_t;
typedef __be64 fdt64_t;
......
arch/arm/kernel/devtree.c
View file @ b27186ab
......@@ -87,14 +87,11 @@ void __init arm_dt_init_cpu_maps(void)
if (!cpus)
return;
for_each_child_of_node(cpus, cpu) {
for_each_of_cpu_node(cpu) {
const __be32 *cell;
int prop_bytes;
u32 hwid;
if (of_node_cmp(cpu->type, "cpu"))
continue;
pr_debug(" * %pOF...\n", cpu);
/*
* A device tree containing CPU nodes with missing "reg"
......
arch/arm/kernel/topology.c
View file @ b27186ab
......@@ -94,12 +94,6 @@ static void __init parse_dt_topology(void)
__cpu_capacity = kcalloc(nr_cpu_ids, sizeof(*__cpu_capacity),
GFP_NOWAIT);
cn = of_find_node_by_path("/cpus");
if (!cn) {
pr_err("No CPU information found in DT\n");
return;
}
for_each_possible_cpu(cpu) {
const u32 *rate;
int len;
......
arch/arm/mach-shmobile/pm-rcar-gen2.c
View file @ b27186ab
......@@ -50,7 +50,7 @@ void __init rcar_gen2_pm_init(void)
void __iomem *p;
u32 bar;
static int once;
struct device_node *np, *cpus;
struct device_node *np;
bool has_a7 = false;
bool has_a15 = false;
struct resource res;
......@@ -59,11 +59,7 @@ void __init rcar_gen2_pm_init(void)
if (once++)
return;
cpus = of_find_node_by_path("/cpus");
if (!cpus)
return;
for_each_child_of_node(cpus, np) {
for_each_of_cpu_node(np) {
if (of_device_is_compatible(np, "arm,cortex-a15"))
has_a15 = true;
else if (of_device_is_compatible(np, "arm,cortex-a7"))
......
arch/arm/mach-shmobile/pm-rmobile.c
View file @ b27186ab
......@@ -202,7 +202,7 @@ static void __init get_special_pds(void)
const struct of_device_id *id;
/* PM domains containing CPUs */
for_each_node_by_type(np, "cpu")
for_each_of_cpu_node(np)
add_special_pd(np, PD_CPU);
/* PM domain containing console */
......
arch/arm/mach-shmobile/timer.c
View file @ b27186ab
......@@ -22,22 +22,16 @@
void __init shmobile_init_delay(void)
{
struct device_node *np, *cpus;
struct device_node *np;
u32 max_freq = 0;
cpus = of_find_node_by_path("/cpus");
if (!cpus)
return;
for_each_child_of_node(cpus, np) {
for_each_of_cpu_node(np) {
u32 freq;
if (!of_property_read_u32(np, "clock-frequency", &freq))
max_freq = max(max_freq, freq);
}
of_node_put(cpus);
if (!max_freq)
return;
......
arch/arm64/Makefile
View file @ b27186ab
......@@ -113,9 +113,8 @@ core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
# Default target when executing plain make
boot := arch/arm64/boot
KBUILD_IMAGE := $(boot)/Image.gz
KBUILD_DTBS := dtbs
all: Image.gz $(KBUILD_DTBS)
all: Image.gz
Image: vmlinux
......@@ -127,17 +126,6 @@ Image.%: Image
zinstall install:
$(Q)$(MAKE) $(build)=$(boot) $@
%.dtb: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
PHONY += dtbs dtbs_install
dtbs: prepare scripts
$(Q)$(MAKE) $(build)=$(boot)/dts
dtbs_install:
$(Q)$(MAKE) $(dtbinst)=$(boot)/dts
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
......@@ -145,7 +133,6 @@ vdso_install:
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
$(Q)$(MAKE) $(clean)=$(boot)/dts
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
# In order to do that, we should use the archprepare target, but we can't since
......@@ -160,8 +147,6 @@ vdso_prepare: prepare0
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo '* dtbs - Build device tree blobs for enabled boards'
echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
......
arch/arm64/kernel/smp.c
View file @ b27186ab
......@@ -602,7 +602,7 @@ static void __init of_parse_and_init_cpus(void)
{
struct device_node *dn;
for_each_node_by_type(dn, "cpu") {
for_each_of_cpu_node(dn) {
u64 hwid = of_get_cpu_mpidr(dn);
if (hwid == INVALID_HWID)
......
arch/c6x/Makefile
View file @ b27186ab
......@@ -40,9 +40,7 @@ boot := arch/$(ARCH)/boot
DTB:=$(subst dtbImage.,,$(filter dtbImage.%, $(MAKECMDGOALS)))
export DTB
ifneq ($(DTB),)
core-y += $(boot)/dts/
endif
# With make 3.82 we cannot mix normal and wildcard targets
......
arch/c6x/boot/dts/Makefile
View file @ b27186ab
......@@ -5,15 +5,12 @@
DTC_FLAGS ?= -p 1024
dtb-$(CONFIG_SOC_TMS320C6455) += dsk6455.dtb
dtb-$(CONFIG_SOC_TMS320C6457) += evmc6457.dtb
dtb-$(CONFIG_SOC_TMS320C6472) += evmc6472.dtb
dtb-$(CONFIG_SOC_TMS320C6474) += evmc6474.dtb
dtb-$(CONFIG_SOC_TMS320C6678) += evmc6678.dtb
ifneq ($(DTB),)
obj-y += linked_dtb.o
obj-y += $(DTB).dtb.o
endif
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
# Generate builtin.dtb from $(DTB).dtb
$(obj)/builtin.dtb: $(obj)/$(DTB).dtb
$(call if_changed,cp)
$(obj)/linked_dtb.o: $(obj)/builtin.dtb
arch/c6x/boot/dts/linked_dtb.S deleted 100644 → 0
View file @ 0ef7791e
.section __fdt_blob,"a"
.incbin "arch/c6x/boot/dts/builtin.dtb"
arch/c6x/include/asm/sections.h
View file @ b27186ab
......@@ -8,6 +8,5 @@ extern char _vectors_start[];
extern char _vectors_end[];
extern char _data_lma[];
extern char _fdt_start[], _fdt_end[];
#endif /* _ASM_C6X_SECTIONS_H */
arch/c6x/kernel/setup.c
View file @ b27186ab
......@@ -96,7 +96,7 @@ static void __init get_cpuinfo(void)
unsigned long core_khz;
u64 tmp;
struct cpuinfo_c6x *p;
struct device_node *node, *np;
struct device_node *node;
p = &per_cpu(cpu_data, smp_processor_id());
......@@ -190,13 +190,8 @@ static void __init get_cpuinfo(void)
p->core_id = get_coreid();
node = of_find_node_by_name(NULL, "cpus");
if (node) {
for_each_child_of_node(node, np)
if (!strcmp("cpu", np->name))
++c6x_num_cores;
of_node_put(node);
}
for_each_of_cpu_node(node)
++c6x_num_cores;
node = of_find_node_by_name(NULL, "soc");
if (node) {
......@@ -270,7 +265,7 @@ int __init c6x_add_memory(phys_addr_t start, unsigned long size)
notrace void __init machine_init(unsigned long dt_ptr)
{
void *dtb = __va(dt_ptr);
void *fdt = _fdt_start;
void *fdt = __dtb_start;
/* interrupts must be masked */
set_creg(IER, 2);
......@@ -363,7 +358,7 @@ void __init setup_arch(char **cmdline_p)
memory_end >> PAGE_SHIFT);
memblock_reserve(memory_start, bootmap_size);
unflatten_device_tree();
unflatten_and_copy_device_tree();
c6x_cache_init();
......
arch/c6x/kernel/vmlinux.lds.S
View file @ b27186ab
......@@ -90,16 +90,6 @@ SECTIONS
*(.switch)
}
. = ALIGN (8) ;
__fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET)
{
_fdt_start = . ; /* place for fdt blob */
*(__fdt_blob) ; /* Any link-placed DTB */
BYTE(0); /* section always has contents */
. = _fdt_start + 0x4000; /* Pad up to 16kbyte */
_fdt_end = . ;
}
_etext = .;
/*
......
arch/h8300/Makefile
View file @ b27186ab
......@@ -31,21 +31,12 @@ CROSS_COMPILE := h8300-unknown-linux-
endif
core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
core-y += arch/h8300/boot/dts/
endif
core-y += arch/$(ARCH)/boot/dts/
libs-y += arch/$(ARCH)/lib/
boot := arch/h8300/boot
%.dtb %.dtb.S %.dtb.o: | scripts
$(Q)$(MAKE) $(build)=arch/h8300/boot/dts arch/h8300/boot/dts/$@
PHONY += dtbs
dtbs: scripts
$(Q)$(MAKE) $(build)=arch/h8300/boot/dts
archmrproper:
archclean:
......
arch/microblaze/Makefile
View file @ b27186ab
......@@ -65,9 +65,7 @@ boot := arch/microblaze/boot
# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
ifneq ($(DTB),)
core-y += $(boot)/dts/
endif
core-y += $(boot)/dts/
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
......
arch/microblaze/boot/dts/Makefile
View file @ b27186ab
# SPDX-License-Identifier: GPL-2.0
#
dtb-y := system.dtb
ifneq ($(DTB),)
obj-y += linked_dtb.o
# Ensure system.dtb exists
......@@ -11,6 +14,7 @@ ifneq ($(DTB),system)
$(obj)/system.dtb: $(obj)/$(DTB).dtb
$(call if_changed,cp)
endif
endif
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
......
arch/microblaze/kernel/cpu/cpuinfo.c
View file @ b27186ab
......@@ -89,9 +89,9 @@ static struct device_node *cpu;
void __init setup_cpuinfo(void)
{
cpu = (struct device_node *) of_find_node_by_type(NULL, "cpu");
cpu = of_get_cpu_node(0, NULL);
if (!cpu)
pr_err("You don't have cpu!!!\n");
pr_err("You don't have cpu or are missing cpu reg property!!!\n");
pr_info("%s: initialising\n", __func__);
......@@ -117,6 +117,8 @@ void __init setup_cpuinfo(void)
if (cpuinfo.mmu_privins)
pr_warn("%s: Stream instructions enabled"
" - USERSPACE CAN LOCK THIS KERNEL!\n", __func__);
of_node_put(cpu);
}
void __init setup_cpuinfo_clk(void)
......
arch/mips/Makefile
View file @ b27186ab
......@@ -407,18 +407,7 @@ endif
CLEAN_FILES += vmlinux.32 vmlinux.64
# device-trees
core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
%.dtb %.dtb.S %.dtb.o: | scripts
$(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@
PHONY += dtbs
dtbs: scripts
$(Q)$(MAKE) $(build)=arch/mips/boot/dts
PHONY += dtbs_install
dtbs_install:
$(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts
core-y += arch/mips/boot/dts/
archprepare:
ifdef CONFIG_MIPS32_N32
......@@ -461,8 +450,6 @@ define archhelp
echo ' uImage.lzma - U-Boot image (lzma)'
echo ' uImage.lzo - U-Boot image (lzo)'
echo ' uzImage.bin - U-Boot image (self-extracting)'
echo ' dtbs - Device-tree blobs for enabled boards'
echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo
echo ' These will be default as appropriate for a configured platform.'
echo
......
arch/nds32/Makefile
View file @ b27186ab
......@@ -47,7 +47,7 @@ CHECKFLAGS += -D__NDS32_EB__
endif
boot := arch/nds32/boot
core-$(BUILTIN_DTB) += $(boot)/dts/
core-y += $(boot)/dts/
.PHONY: FORCE
......
arch/nios2/Makefile
View file @ b27186ab
......@@ -49,21 +49,13 @@ BOOT_TARGETS = vmImage zImage
PHONY += $(BOOT_TARGETS) install
KBUILD_IMAGE := $(nios2-boot)/vmImage
ifneq ($(CONFIG_NIOS2_DTB_SOURCE),"")
core-y += $(nios2-boot)/
endif
core-y += $(nios2-boot)/dts/
all: vmImage
archclean:
$(Q)$(MAKE) $(clean)=$(nios2-boot)
%.dtb: | scripts
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
dtbs:
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
......@@ -76,5 +68,4 @@ define archhelp
echo ' (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH)'
echo ' dtbs - Build device tree blobs for enabled boards'
endef
arch/nios2/boot/Makefile
View file @ b27186ab
......@@ -31,27 +31,5 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(obj)/compressed/vmlinux: $(obj)/vmlinux.gz FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
# Rule to build device tree blobs
DTB_SRC := $(patsubst "%",%,$(CONFIG_NIOS2_DTB_SOURCE))
# Make sure the generated dtb gets removed during clean
extra-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += system.dtb
$(obj)/system.dtb: $(DTB_SRC) FORCE
$(call cmd,dtc)
# Ensure system.dtb exists
$(obj)/linked_dtb.o: $(obj)/system.dtb
obj-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += linked_dtb.o
targets += $(dtb-y)
# Rule to build device tree blobs with make command
$(obj)/%.dtb: $(src)/dts/%.dts FORCE
$(call if_changed_dep,dtc)
$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
arch/nios2/boot/dts/Makefile 0 → 100644
View file @ b27186ab
# SPDX-License-Identifier: GPL-2.0
obj-y := $(patsubst "%.dts",%.dtb.o,$(CONFIG_NIOS2_DTB_SOURCE))
dtstree := $(srctree)/$(src)
dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
arch/nios2/boot/linked_dtb.S deleted 100644 → 0
View file @ 0ef7791e
/*
* Copyright (C) 2011 Thomas Chou <thomas@wytron.com.tw>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
.section .dtb.init.rodata,"a"
.incbin "arch/nios2/boot/system.dtb"
arch/nios2/kernel/cpuinfo.c
View file @ b27186ab
......@@ -47,7 +47,7 @@ void __init setup_cpuinfo(void)
const char *str;
int len;
cpu = of_find_node_by_type(NULL, "cpu");
cpu = of_get_cpu_node(0, NULL);
if (!cpu)
panic("%s: No CPU found in devicetree!\n", __func__);
......@@ -120,6 +120,8 @@ void __init setup_cpuinfo(void)
cpuinfo.reset_addr = fcpu(cpu, "altr,reset-addr");
cpuinfo.exception_addr = fcpu(cpu, "altr,exception-addr");
cpuinfo.fast_tlb_miss_exc_addr = fcpu(cpu, "altr,fast-tlb-miss-addr");
of_node_put(cpu);
}
#ifdef CONFIG_PROC_FS
......
arch/nios2/kernel/time.c
View file @ b27186ab
......@@ -214,12 +214,12 @@ static int __init nios2_timer_get_base_and_freq(struct device_node *np,
{
*base = of_iomap(np, 0);
if (!*base) {
pr_crit("Unable to map reg for %s\n", np->name);
pr_crit("Unable to map reg for %pOFn\n", np);
return -ENXIO;
}
if (of_property_read_u32(np, "clock-frequency", freq)) {
pr_crit("Unable to get %s clock frequency\n", np->name);
pr_crit("Unable to get %pOFn clock frequency\n", np);
return -EINVAL;
}
......
arch/openrisc/kernel/setup.c
View file @ b27186ab
......@@ -158,9 +158,8 @@ static struct device_node *setup_find_cpu_node(int cpu)
{
u32 hwid;
struct device_node *cpun;
struct device_node *cpus = of_find_node_by_path("/cpus");
for_each_available_child_of_node(cpus, cpun) {
for_each_of_cpu_node(cpun) {
if (of_property_read_u32(cpun, "reg", &hwid))
continue;
if (hwid == cpu)
......
arch/powerpc/Makefile
View file @ b27186ab
......@@ -293,9 +293,6 @@ $(BOOT_TARGETS2): vmlinux
bootwrapper_install:
$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
%.dtb: scripts
$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
# Used to create 'merged defconfigs'
# To use it $(call) it with the first argument as the base defconfig
# and the second argument as a space separated list of .config files to merge,
......
arch/powerpc/boot/Makefile
View file @ b27186ab
......@@ -304,9 +304,9 @@ image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
dtbImage.adder875-redboot
# Board ports in arch/powerpc/platform/52xx/Kconfig
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb
image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b
image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200
# Board ports in arch/powerpc/platform/82xx/Kconfig
image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
......@@ -381,11 +381,11 @@ $(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperb
$(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
$(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
$(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
$(call if_changed,wrap,$*,,$(obj)/$*.dtb)
$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
$(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb)
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
# prefix
......@@ -395,36 +395,33 @@ $(obj)/vmlinux.strip: vmlinux
$(obj)/uImage: vmlinux $(wrapperbits) FORCE
$(call if_changed,wrap,uboot)
$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb)
$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb)
$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
$(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb)
# Rule to build device tree blobs
$(obj)/%.dtb: $(src)/dts/%.dts FORCE
$(call if_changed_dep,dtc)
$(obj)/%.dtb: $(src)/dts/fsl/%.dts FORCE
$(call if_changed_dep,dtc)
# Needed for the above targets to work with dts/fsl/ files
$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb
@cp $< $@
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
......
arch/powerpc/boot/dts/Makefile 0 → 100644
View file @ b27186ab
# SPDX-License-Identifier: GPL-2.0
subdir-y += fsl
dtstree := $(srctree)/$(src)
dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
arch/powerpc/boot/dts/fsl/Makefile 0 → 100644
View file @ b27186ab
# SPDX-License-Identifier: GPL-2.0
dtstree := $(srctree)/$(src)
dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
arch/powerpc/boot/libfdt_env.h
View file @ b27186ab
......@@ -5,6 +5,8 @@
#include <types.h>
#include <string.h>
#define INT_MAX ((int)(~0U>>1))
#include "of.h"
typedef unsigned long uintptr_t;
......
arch/powerpc/platforms/4xx/soc.c
View file @ b27186ab
......@@ -200,7 +200,7 @@ void ppc4xx_reset_system(char *cmd)
u32 reset_type = DBCR0_RST_SYSTEM;
const u32 *prop;
np = of_find_node_by_type(NULL, "cpu");
np = of_get_cpu_node(0, NULL);
if (np) {
prop = of_get_property(np, "reset-type", NULL);
......
arch/powerpc/platforms/8xx/m8xx_setup.c
View file @ b27186ab
......@@ -66,7 +66,7 @@ static int __init get_freq(char *name, unsigned long *val)
int found = 0;
/* The cpu node should have timebase and clock frequency properties */
cpu = of_find_node_by_type(NULL, "cpu");
cpu = of_get_cpu_node(0, NULL);
if (cpu) {
fp = of_get_property(cpu, name, NULL);
......@@ -147,8 +147,9 @@ void __init mpc8xx_calibrate_decr(void)
* we have to enable the timebase). The decrementer interrupt
* is wired into the vector table, nothing to do here for that.
*/
cpu = of_find_node_by_type(NULL, "cpu");
cpu = of_get_cpu_node(0, NULL);
virq= irq_of_parse_and_map(cpu, 0);
of_node_put(cpu);
irq = virq_to_hw(virq);
sys_tmr2 = immr_map(im_sit);
......
arch/powerpc/platforms/powermac/feature.c
View file @ b27186ab
......@@ -1049,7 +1049,6 @@ core99_reset_cpu(struct device_node *node, long param, long value)
unsigned long flags;
struct macio_chip *macio;
struct device_node *np;
struct device_node *cpus;
const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0,
KL_GPIO_RESET_CPU1,
KL_GPIO_RESET_CPU2,
......@@ -1059,10 +1058,7 @@ core99_reset_cpu(struct device_node *node, long param, long value)
if (macio->type != macio_keylargo)
return -ENODEV;
cpus = of_find_node_by_path("/cpus");
if (cpus == NULL)
return -ENODEV;
for (np = cpus->child; np != NULL; np = np->sibling) {
for_each_of_cpu_node(np) {
const u32 *num = of_get_property(np, "reg", NULL);
const u32 *rst = of_get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
......@@ -1072,7 +1068,6 @@ core99_reset_cpu(struct device_node *node, long param, long value)
break;
}
}
of_node_put(cpus);
if (np == NULL || reset_io == 0)
reset_io = dflt_reset_lines[param];
......@@ -1504,16 +1499,12 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
unsigned long flags;
struct macio_chip *macio;
struct device_node *np;
struct device_node *cpus;
macio = &macio_chips[0];
if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
return -ENODEV;
cpus = of_find_node_by_path("/cpus");
if (cpus == NULL)
return -ENODEV;
for (np = cpus->child; np != NULL; np = np->sibling) {
for_each_of_cpu_node(np) {
const u32 *num = of_get_property(np, "reg", NULL);
const u32 *rst = of_get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
......@@ -1523,7 +1514,6 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
break;
}
}
of_node_put(cpus);
if (np == NULL || reset_io == 0)
return -ENODEV;
......@@ -2515,31 +2505,26 @@ static int __init probe_motherboard(void)
* supposed to be set when not supported, but I'm not very confident
* that all Apple OF revs did it properly, I do it the paranoid way.
*/
while (uninorth_base && uninorth_rev > 3) {
struct device_node *cpus = of_find_node_by_path("/cpus");
if (uninorth_base && uninorth_rev > 3) {
struct device_node *np;
if (!cpus || !cpus->child) {
printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
of_node_put(cpus);
break;
}
np = cpus->child;
/* Nap mode not supported on SMP */
if (np->sibling) {
of_node_put(cpus);
break;
}
/* Nap mode not supported if flush-on-lock property is present */
if (of_get_property(np, "flush-on-lock", NULL)) {
of_node_put(cpus);
break;
for_each_of_cpu_node(np) {
int cpu_count = 1;
/* Nap mode not supported on SMP */
if (of_get_property(np, "flush-on-lock", NULL) ||
(cpu_count > 1)) {
powersave_nap = 0;
of_node_put(np);
break;
}
cpu_count++;
powersave_nap = 1;
}
of_node_put(cpus);
powersave_nap = 1;
printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
break;
}
if (powersave_nap)
printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
/* On CPUs that support it (750FX), lowspeed by default during
* NAP mode
......
arch/powerpc/platforms/powermac/setup.c
View file @ b27186ab
......@@ -243,10 +243,9 @@ static void __init l2cr_init(void)
{
/* Checks "l2cr-value" property in the registry */
if (cpu_has_feature(CPU_FTR_L2CR)) {
struct device_node *np = of_find_node_by_name(NULL, "cpus");
if (!np)
np = of_find_node_by_type(NULL, "cpu");
if (np) {
struct device_node *np;
for_each_of_cpu_node(np) {
const unsigned int *l2cr =
of_get_property(np, "l2cr-value", NULL);
if (l2cr) {
......@@ -256,6 +255,7 @@ static void __init l2cr_init(void)
_set_L2CR(ppc_override_l2cr_value);
}
of_node_put(np);
break;
}
}
......@@ -279,8 +279,8 @@ static void __init pmac_setup_arch(void)
/* Set loops_per_jiffy to a half-way reasonable value,
for use until calibrate_delay gets called. */
loops_per_jiffy = 50000000 / HZ;
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != NULL) {
for_each_of_cpu_node(cpu) {
fp = of_get_property(cpu, "clock-frequency", NULL);
if (fp != NULL) {
if (pvr >= 0x30 && pvr < 0x80)
......@@ -292,8 +292,9 @@ static void __init pmac_setup_arch(void)
else
/* 601, 603, etc. */
loops_per_jiffy = *fp / (2 * HZ);
of_node_put(cpu);
break;
}
of_node_put(cpu);
}
/* See if newworld or oldworld */
......
arch/sh/boards/of-generic.c
View file @ b27186ab
......@@ -64,7 +64,7 @@ static void sh_of_smp_probe(void)
init_cpu_possible(cpumask_of(0));
for_each_node_by_type(np, "cpu") {
for_each_of_cpu_node(np) {
const __be32 *cell = of_get_property(np, "reg", NULL);
u64 id = -1;
if (cell) id = of_read_number(cell, of_n_addr_cells(np));
......
arch/sparc/include/asm/prom.h
View file @ b27186ab
......@@ -24,9 +24,6 @@
#include <linux/atomic.h>
#include <linux/irqdomain.h>
#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 2
#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
#define of_compat_cmp(s1, s2, l) strncmp((s1), (s2), (l))
#define of_prop_cmp(s1, s2) strcasecmp((s1), (s2))
#define of_node_cmp(s1, s2) strcmp((s1), (s2))
......
arch/x86/kernel/devicetree.c
View file @ b27186ab
......@@ -140,7 +140,7 @@ static void __init dtb_cpu_setup(void)
int ret;
version = GET_APIC_VERSION(apic_read(APIC_LVR));
for_each_node_by_type(dn, "cpu") {
for_each_of_cpu_node(dn) {
ret = of_property_read_u32(dn, "reg", &apic_id);
if (ret < 0) {
pr_warn("%pOF: missing local APIC ID\n", dn);
......
arch/xtensa/Makefile
View file @ b27186ab
......@@ -80,28 +80,18 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
head-y := arch/xtensa/kernel/head.o
core-y += arch/xtensa/kernel/ arch/xtensa/mm/
core-y += $(buildvar) $(buildplf)
core-y += arch/xtensa/boot/dts/
libs-y += arch/xtensa/lib/ $(LIBGCC)
drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/
ifneq ($(CONFIG_BUILTIN_DTB),"")
core-$(CONFIG_OF) += arch/xtensa/boot/dts/
endif
boot := arch/xtensa/boot
all Image zImage uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
%.dtb:
$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts
define archhelp
@echo '* Image - Kernel ELF image with reset vector'
@echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
@echo '* uImage - U-Boot wrapped image'
@echo ' dtbs - Build device tree blobs for enabled boards'
endef
arch/xtensa/platforms/xtfpga/setup.c
View file @ b27186ab
......@@ -94,7 +94,7 @@ static void __init xtfpga_clk_setup(struct device_node *np)
u32 freq;
if (!base) {
pr_err("%s: invalid address\n", np->name);
pr_err("%pOFn: invalid address\n", np);
return;
}
......@@ -103,12 +103,12 @@ static void __init xtfpga_clk_setup(struct device_node *np)
clk = clk_register_fixed_rate(NULL, np->name, NULL, 0, freq);
if (IS_ERR(clk)) {
pr_err("%s: clk registration failed\n", np->name);
pr_err("%pOFn: clk registration failed\n", np);
return;
}
if (of_clk_add_provider(np, of_clk_src_simple_get, clk)) {
pr_err("%s: clk provider registration failed\n", np->name);
pr_err("%pOFn: clk provider registration failed\n", np);
return;
}
}
......
drivers/bus/fsl-mc/fsl-mc-bus.c
View file @ b27186ab
......@@ -706,8 +706,8 @@ static int parse_mc_ranges(struct device *dev,
*ranges_start = of_get_property(mc_node, "ranges", &ranges_len);
if (!(*ranges_start) || !ranges_len) {
dev_warn(dev,
"missing or empty ranges property for device tree node '%s'\n",
mc_node->name);
"missing or empty ranges property for device tree node '%pOFn'\n",
mc_node);
return 0;
}
......@@ -730,7 +730,7 @@ static int parse_mc_ranges(struct device *dev,
tuple_len = range_tuple_cell_count * sizeof(__be32);
if (ranges_len % tuple_len != 0) {
dev_err(dev, "malformed ranges property '%s'\n", mc_node->name);
dev_err(dev, "malformed ranges property '%pOFn'\n", mc_node);
return -EINVAL;
}
......
drivers/bus/mvebu-mbus.c
View file @ b27186ab
......@@ -1229,7 +1229,7 @@ mbus_parse_ranges(struct device_node *node,
tuple_len = (*cell_count) * sizeof(__be32);
if (ranges_len % tuple_len) {
pr_warn("malformed ranges entry '%s'\n", node->name);
pr_warn("malformed ranges entry '%pOFn'\n", node);
return -EINVAL;
}
return 0;
......
drivers/clk/mvebu/clk-cpu.c
View file @ b27186ab
......@@ -183,7 +183,7 @@ static void __init of_cpu_clk_setup(struct device_node *node)
pr_warn("%s: pmu-dfs base register not set, dynamic frequency scaling not available\n",
__func__);
for_each_node_by_type(dn, "cpu")
for_each_of_cpu_node(dn)
ncpus++;
cpuclk = kcalloc(ncpus, sizeof(*cpuclk), GFP_KERNEL);
......@@ -194,7 +194,7 @@ static void __init of_cpu_clk_setup(struct device_node *node)
if (WARN_ON(!clks))
goto clks_out;
for_each_node_by_type(dn, "cpu") {
for_each_of_cpu_node(dn) {
struct clk_init_data init;
struct clk *clk;
char *clk_name = kzalloc(5, GFP_KERNEL);
......
drivers/edac/cpc925_edac.c
View file @ b27186ab
......@@ -593,8 +593,7 @@ static void cpc925_mc_check(struct mem_ctl_info *mci)
/******************** CPU err device********************************/
static u32 cpc925_cpu_mask_disabled(void)
{
struct device_node *cpus;
struct device_node *cpunode = NULL;
struct device_node *cpunode;
static u32 mask = 0;
/* use cached value if available */
......@@ -603,20 +602,8 @@ static u32 cpc925_cpu_mask_disabled(void)
mask = APIMASK_ADI0 | APIMASK_ADI1;
cpus = of_find_node_by_path("/cpus");
if (cpus == NULL) {
cpc925_printk(KERN_DEBUG, "No /cpus node !\n");
return 0;
}
while ((cpunode = of_get_next_child(cpus, cpunode)) != NULL) {
for_each_of_cpu_node(cpunode) {
const u32 *reg = of_get_property(cpunode, "reg", NULL);
if (strcmp(cpunode->type, "cpu")) {
cpc925_printk(KERN_ERR, "Not a cpu node in /cpus: %s\n", cpunode->name);
continue;
}
if (reg == NULL || *reg > 2) {
cpc925_printk(KERN_ERR, "Bad reg value at %pOF\n", cpunode);
continue;
......@@ -633,9 +620,6 @@ static u32 cpc925_cpu_mask_disabled(void)
"Assuming PI id is equal to CPU MPIC id!\n");
}
of_node_put(cpunode);
of_node_put(cpus);
return mask;
}
......
drivers/firmware/scpi_pm_domain.c
View file @ b27186ab
......@@ -121,7 +121,7 @@ static int scpi_pm_domain_probe(struct platform_device *pdev)
scpi_pd->domain = i;
scpi_pd->ops = scpi_ops;
sprintf(scpi_pd->name, "%s.%d", np->name, i);
sprintf(scpi_pd->name, "%pOFn.%d", np, i);
scpi_pd->genpd.name = scpi_pd->name;
scpi_pd->genpd.power_off = scpi_pd_power_off;
scpi_pd->genpd.power_on = scpi_pd_power_on;
......
drivers/gpu/drm/mediatek/mtk_hdmi.c
View file @ b27186ab
......@@ -1446,8 +1446,7 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
}
/* The CEC module handles HDMI hotplug detection */
cec_np = of_find_compatible_node(np->parent, NULL,
"mediatek,mt8173-cec");
cec_np = of_get_compatible_child(np->parent, "mediatek,mt8173-cec");
if (!cec_np) {
dev_err(dev, "Failed to find CEC node\n");
return -EINVAL;
......@@ -1457,8 +1456,10 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
if (!cec_pdev) {
dev_err(hdmi->dev, "Waiting for CEC device %pOF\n",
cec_np);
of_node_put(cec_np);
return -EPROBE_DEFER;
}
of_node_put(cec_np);
hdmi->cec_dev = &cec_pdev->dev;
/*
......
drivers/gpu/drm/msm/adreno/adreno_gpu.c
View file @ b27186ab
......@@ -633,8 +633,7 @@ static int adreno_get_legacy_pwrlevels(struct device *dev)
struct device_node *child, *node;
int ret;
node = of_find_compatible_node(dev->of_node, NULL,
"qcom,gpu-pwrlevels");
node = of_get_compatible_child(dev->of_node, "qcom,gpu-pwrlevels");
if (!node) {
dev_err(dev, "Could not find the GPU powerlevels\n");
return -ENXIO;
......@@ -655,6 +654,8 @@ static int adreno_get_legacy_pwrlevels(struct device *dev)
dev_pm_opp_add(dev, val, 0);
}
of_node_put(node);
return 0;
}
......
drivers/iommu/fsl_pamu.c
View file @ b27186ab
......@@ -543,7 +543,7 @@ u32 get_stash_id(u32 stash_dest_hint, u32 vcpu)
return ~(u32)0;
}
for_each_node_by_type(node, "cpu") {
for_each_of_cpu_node(node) {
prop = of_get_property(node, "reg", &len);
for (i = 0; i < len / sizeof(u32); i++) {
if (be32_to_cpup(&prop[i]) == vcpu) {
......
drivers/net/ethernet/broadcom/genet/bcmmii.c
View file @ b27186ab
......@@ -341,7 +341,7 @@ static struct device_node *bcmgenet_mii_of_find_mdio(struct bcmgenet_priv *priv)
if (!compat)
return NULL;
priv->mdio_dn = of_find_compatible_node(dn, NULL, compat);
priv->mdio_dn = of_get_compatible_child(dn, compat);
kfree(compat);
if (!priv->mdio_dn) {
dev_err(kdev, "unable to find MDIO bus node\n");
......
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
View file @ b27186ab
......@@ -714,8 +714,9 @@ static int get_ephy_nodes(struct stmmac_priv *priv)
return -ENODEV;
}
mdio_internal = of_find_compatible_node(mdio_mux, NULL,
mdio_internal = of_get_compatible_child(mdio_mux,
"allwinner,sun8i-h3-mdio-internal");
of_node_put(mdio_mux);
if (!mdio_internal) {
dev_err(priv->device, "Cannot get internal_mdio node\n");
return -ENODEV;
......@@ -729,13 +730,20 @@ static int get_ephy_nodes(struct stmmac_priv *priv)
gmac->rst_ephy = of_reset_control_get_exclusive(iphynode, NULL);
if (IS_ERR(gmac->rst_ephy)) {
ret = PTR_ERR(gmac->rst_ephy);
if (ret == -EPROBE_DEFER)
if (ret == -EPROBE_DEFER) {
of_node_put(iphynode);
of_node_put(mdio_internal);
return ret;
}
continue;
}
dev_info(priv->device, "Found internal PHY node\n");
of_node_put(iphynode);
of_node_put(mdio_internal);
return 0;
}
of_node_put(mdio_internal);
return -ENODEV;
}
......
drivers/nfc/nfcmrvl/uart.c
View file @ b27186ab
......@@ -73,10 +73,9 @@ static int nfcmrvl_uart_parse_dt(struct device_node *node,
struct device_node *matched_node;
int ret;
matched_node = of_find_compatible_node(node, NULL, "marvell,nfc-uart");
matched_node = of_get_compatible_child(node, "marvell,nfc-uart");
if (!matched_node) {
matched_node = of_find_compatible_node(node, NULL,
"mrvl,nfc-uart");
matched_node = of_get_compatible_child(node, "mrvl,nfc-uart");
if (!matched_node)
return -ENODEV;
}
......
drivers/of/base.c
View file @ b27186ab
......@@ -67,6 +67,7 @@ bool of_node_name_eq(const struct device_node *np, const char *name)
return (strlen(name) == len) && (strncmp(node_name, name, len) == 0);
}
EXPORT_SYMBOL(of_node_name_eq);
bool of_node_name_prefix(const struct device_node *np, const char *prefix)
{
......@@ -75,6 +76,7 @@ bool of_node_name_prefix(const struct device_node *np, const char *prefix)
return strncmp(kbasename(np->full_name), prefix, strlen(prefix)) == 0;
}
EXPORT_SYMBOL(of_node_name_prefix);
int of_n_addr_cells(struct device_node *np)
{
......@@ -330,6 +332,8 @@ static bool __of_find_n_match_cpu_property(struct device_node *cpun,
ac = of_n_addr_cells(cpun);
cell = of_get_property(cpun, prop_name, &prop_len);
if (!cell && !ac && arch_match_cpu_phys_id(cpu, 0))
return true;
if (!cell || !ac)
return false;
prop_len /= sizeof(*cell) * ac;
......@@ -390,7 +394,7 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
{
struct device_node *cpun;
for_each_node_by_type(cpun, "cpu") {
for_each_of_cpu_node(cpun) {
if (arch_find_n_match_cpu_physical_id(cpun, cpu, thread))
return cpun;
}
......@@ -744,6 +748,45 @@ struct device_node *of_get_next_available_child(const struct device_node *node,
}
EXPORT_SYMBOL(of_get_next_available_child);
/**
* of_get_next_cpu_node - Iterate on cpu nodes
* @prev: previous child of the /cpus node, or NULL to get first
*
* Returns a cpu node pointer with refcount incremented, use of_node_put()
* on it when done. Returns NULL when prev is the last child. Decrements
* the refcount of prev.
*/
struct device_node *of_get_next_cpu_node(struct device_node *prev)
{
struct device_node *next = NULL;
unsigned long flags;
struct device_node *node;
if (!prev)
node = of_find_node_by_path("/cpus");
raw_spin_lock_irqsave(&devtree_lock, flags);
if (prev)
next = prev->sibling;
else if (node) {
next = node->child;
of_node_put(node);
}
for (; next; next = next->sibling) {
if (!(of_node_name_eq(next, "cpu") ||
(next->type && !of_node_cmp(next->type, "cpu"))))
continue;
if (!__of_device_is_available(next))
continue;
if (of_node_get(next))
break;
}
of_node_put(prev);
raw_spin_unlock_irqrestore(&devtree_lock, flags);
return next;
}
EXPORT_SYMBOL(of_get_next_cpu_node);
/**
* of_get_compatible_child - Find compatible child node
* @parent: parent node
......@@ -2013,7 +2056,7 @@ struct device_node *of_find_next_cache_node(const struct device_node *np)
/* OF on pmac has nodes instead of properties named "l2-cache"
* beneath CPU nodes.
*/
if (!strcmp(np->type, "cpu"))
if (IS_ENABLED(CONFIG_PPC_PMAC) && !strcmp(np->type, "cpu"))
for_each_child_of_node(np, child)
if (!strcmp(child->type, "cache"))
return child;
......
drivers/of/device.c
View file @ b27186ab
......@@ -207,7 +207,8 @@ static ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len
return -ENODEV;
/* Name & Type */
csize = snprintf(str, len, "of:N%sT%s", dev->of_node->name,
/* %p eats all alphanum characters, so %c must be used here */
csize = snprintf(str, len, "of:N%pOFn%c%s", dev->of_node, 'T',
dev->of_node->type);
tsize = csize;
len -= csize;
......@@ -286,7 +287,7 @@ void of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
if ((!dev) || (!dev->of_node))
return;
add_uevent_var(env, "OF_NAME=%s", dev->of_node->name);
add_uevent_var(env, "OF_NAME=%pOFn", dev->of_node);
add_uevent_var(env, "OF_FULLNAME=%pOF", dev->of_node);
if (dev->of_node->type && strcmp("<NULL>", dev->of_node->type) != 0)
add_uevent_var(env, "OF_TYPE=%s", dev->of_node->type);
......
drivers/of/of_mdio.c
View file @ b27186ab
......@@ -97,8 +97,8 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
return rc;
}
dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
child->name, addr);
dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
child, addr);
return 0;
}
......@@ -127,8 +127,8 @@ static int of_mdiobus_register_device(struct mii_bus *mdio,
return rc;
}
dev_dbg(&mdio->dev, "registered mdio device %s at address %i\n",
child->name, addr);
dev_dbg(&mdio->dev, "registered mdio device %pOFn at address %i\n",
child, addr);
return 0;
}
......@@ -263,8 +263,8 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
continue;
/* be noisy to encourage people to set reg property */
dev_info(&mdio->dev, "scan phy %s at address %i\n",
child->name, addr);
dev_info(&mdio->dev, "scan phy %pOFn at address %i\n",
child, addr);
if (of_mdiobus_child_is_phy(child)) {
rc = of_mdiobus_register_phy(mdio, child, addr);
......
drivers/of/of_numa.c
View file @ b27186ab
......@@ -24,18 +24,9 @@ static void __init of_numa_parse_cpu_nodes(void)
{
u32 nid;
int r;
struct device_node *cpus;
struct device_node *np = NULL;
cpus = of_find_node_by_path("/cpus");
if (!cpus)
return;
for_each_child_of_node(cpus, np) {
/* Skip things that are not CPUs */
if (of_node_cmp(np->type, "cpu") != 0)
continue;
struct device_node *np;
for_each_of_cpu_node(np) {
r = of_property_read_u32(np, "numa-node-id", &nid);
if (r)
continue;
......@@ -46,8 +37,6 @@ static void __init of_numa_parse_cpu_nodes(void)
else
node_set(nid, numa_nodes_parsed);
}
of_node_put(cpus);
}
static int __init of_numa_parse_memory_nodes(void)
......@@ -163,8 +152,8 @@ int of_node_to_nid(struct device_node *device)
np = of_get_next_parent(np);
}
if (np && r)
pr_warn("Invalid \"numa-node-id\" property in node %s\n",
np->name);
pr_warn("Invalid \"numa-node-id\" property in node %pOFn\n",
np);
of_node_put(np);
/*
......
drivers/of/of_private.h
View file @ b27186ab
......@@ -27,6 +27,14 @@ struct alias_prop {
char stem[0];
};
#if defined(CONFIG_SPARC)
#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 2
#else
#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
#endif
#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
extern struct mutex of_mutex;
extern struct list_head aliases_lookup;
extern struct kset *of_kset;
......
drivers/of/overlay.c
View file @ b27186ab
......@@ -425,8 +425,8 @@ static int build_changeset_next_level(struct overlay_changeset *ovcs,
for_each_child_of_node(overlay_node, child) {
ret = add_changeset_node(ovcs, target_node, child);
if (ret) {
pr_debug("Failed to apply node @%pOF/%s, err=%d\n",
target_node, child->name, ret);
pr_debug("Failed to apply node @%pOF/%pOFn, err=%d\n",
target_node, child, ret);
of_node_put(child);
return ret;
}
......
drivers/of/platform.c
View file @ b27186ab
......@@ -91,8 +91,8 @@ static void of_device_make_bus_id(struct device *dev)
*/
reg = of_get_property(node, "reg", NULL);
if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
dev_set_name(dev, dev_name(dev) ? "%llx.%s:%s" : "%llx.%s",
(unsigned long long)addr, node->name,
dev_set_name(dev, dev_name(dev) ? "%llx.%pOFn:%s" : "%llx.%pOFn",
(unsigned long long)addr, node,
dev_name(dev));
return;
}
......@@ -142,8 +142,8 @@ struct platform_device *of_device_alloc(struct device_node *np,
WARN_ON(rc);
}
if (of_irq_to_resource_table(np, res, num_irq) != num_irq)
pr_debug("not all legacy IRQ resources mapped for %s\n",
np->name);
pr_debug("not all legacy IRQ resources mapped for %pOFn\n",
np);
}
dev->dev.of_node = of_node_get(np);
......
drivers/of/unittest-data/overlay_15.dts
View file @ b27186ab
......@@ -20,8 +20,8 @@ i2c@0 {
#size-cells = <0>;
reg = <0>;
test-mux-dev {
reg = <32>;
test-mux-dev@20 {
reg = <0x20>;
compatible = "unittest-i2c-dev";
status = "okay";
};
......
drivers/of/unittest-data/tests-overlay.dtsi
View file @ b27186ab
......@@ -103,8 +103,8 @@ i2c@0 {
#size-cells = <0>;
reg = <0>;
test-mux-dev {
reg = <32>;
test-mux-dev@20 {
reg = <0x20>;
compatible = "unittest-i2c-dev";
status = "okay";
};
......
drivers/of/unittest.c
View file @ b27186ab
......@@ -212,8 +212,8 @@ static int __init of_unittest_check_node_linkage(struct device_node *np)
for_each_child_of_node(np, child) {
if (child->parent != np) {
pr_err("Child node %s links to wrong parent %s\n",
child->name, np->name);
pr_err("Child node %pOFn links to wrong parent %pOFn\n",
child, np);
rc = -EINVAL;
goto put_child;
}
......@@ -299,6 +299,10 @@ static void __init of_unittest_printf(void)
of_unittest_printf_one(np, "%pOF", full_name);
of_unittest_printf_one(np, "%pOFf", full_name);
of_unittest_printf_one(np, "%pOFn", "dev");
of_unittest_printf_one(np, "%2pOFn", "dev");
of_unittest_printf_one(np, "%5pOFn", " dev");
of_unittest_printf_one(np, "%pOFnc", "dev:test-sub-device");
of_unittest_printf_one(np, "%pOFp", phandle_str);
of_unittest_printf_one(np, "%pOFP", "dev@100");
of_unittest_printf_one(np, "ABC %pOFP ABC", "ABC dev@100 ABC");
......@@ -1046,16 +1050,16 @@ static void __init of_unittest_platform_populate(void)
for_each_child_of_node(np, child) {
for_each_child_of_node(child, grandchild)
unittest(of_find_device_by_node(grandchild),
"Could not create device for node '%s'\n",
grandchild->name);
"Could not create device for node '%pOFn'\n",
grandchild);
}
of_platform_depopulate(&test_bus->dev);
for_each_child_of_node(np, child) {
for_each_child_of_node(child, grandchild)
unittest(!of_find_device_by_node(grandchild),
"device didn't get destroyed '%s'\n",
grandchild->name);
"device didn't get destroyed '%pOFn'\n",
grandchild);
}
platform_device_unregister(test_bus);
......@@ -2357,11 +2361,14 @@ static __init void of_unittest_overlay_high_level(void)
}
}
for (np = overlay_base_root->child; np; np = np->sibling) {
if (of_get_child_by_name(of_root, np->name)) {
unittest(0, "illegal node name in overlay_base %s",
np->name);
return;
for_each_child_of_node(overlay_base_root, np) {
struct device_node *base_child;
for_each_child_of_node(of_root, base_child) {
if (!strcmp(np->full_name, base_child->full_name)) {
unittest(0, "illegal node name in overlay_base %pOFn",
np);
return;
}
}
}
......
drivers/power/supply/twl4030_charger.c
View file @ b27186ab
......@@ -1022,12 +1022,13 @@ static int twl4030_bci_probe(struct platform_device *pdev)
if (bci->dev->of_node) {
struct device_node *phynode;
phynode = of_find_compatible_node(bci->dev->of_node->parent,
NULL, "ti,twl4030-usb");
phynode = of_get_compatible_child(bci->dev->of_node->parent,
"ti,twl4030-usb");
if (phynode) {
bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
bci->transceiver = devm_usb_get_phy_by_node(
bci->dev, phynode, &bci->usb_nb);
of_node_put(phynode);
if (IS_ERR(bci->transceiver)) {
ret = PTR_ERR(bci->transceiver);
if (ret == -EPROBE_DEFER)
......
drivers/soc/dove/pmu.c
View file @ b27186ab
......@@ -383,7 +383,7 @@ int __init dove_init_pmu(void)
domains_node = of_get_child_by_name(np_pmu, "domains");
if (!domains_node) {
pr_err("%s: failed to find domains sub-node\n", np_pmu->name);
pr_err("%pOFn: failed to find domains sub-node\n", np_pmu);
return 0;
}
......@@ -396,7 +396,7 @@ int __init dove_init_pmu(void)
pmu->pmc_base = of_iomap(pmu->of_node, 0);
pmu->pmu_base = of_iomap(pmu->of_node, 1);
if (!pmu->pmc_base || !pmu->pmu_base) {
pr_err("%s: failed to map PMU\n", np_pmu->name);
pr_err("%pOFn: failed to map PMU\n", np_pmu);
iounmap(pmu->pmu_base);
iounmap(pmu->pmc_base);
kfree(pmu);
......@@ -414,7 +414,7 @@ int __init dove_init_pmu(void)
break;
domain->pmu = pmu;
domain->base.name = kstrdup(np->name, GFP_KERNEL);
domain->base.name = kasprintf(GFP_KERNEL, "%pOFn", np);
if (!domain->base.name) {
kfree(domain);
break;
......@@ -444,7 +444,7 @@ int __init dove_init_pmu(void)
/* Loss of the interrupt controller is not a fatal error. */
parent_irq = irq_of_parse_and_map(pmu->of_node, 0);
if (!parent_irq) {
pr_err("%s: no interrupt specified\n", np_pmu->name);
pr_err("%pOFn: no interrupt specified\n", np_pmu);
} else {
ret = dove_init_pmu_irq(pmu, parent_irq);
if (ret)
......
drivers/soc/fsl/qe/qe_tdm.c
View file @ b27186ab
......@@ -131,7 +131,7 @@ int ucc_of_parse_tdm(struct device_node *np, struct ucc_tdm *utdm,
pdev = of_find_device_by_node(np2);
if (!pdev) {
pr_err("%s: failed to lookup pdev\n", np2->name);
pr_err("%pOFn: failed to lookup pdev\n", np2);
of_node_put(np2);
return -EINVAL;
}
......@@ -153,7 +153,7 @@ int ucc_of_parse_tdm(struct device_node *np, struct ucc_tdm *utdm,
pdev = of_find_device_by_node(np2);
if (!pdev) {
ret = -EINVAL;
pr_err("%s: failed to lookup pdev\n", np2->name);
pr_err("%pOFn: failed to lookup pdev\n", np2);
of_node_put(np2);
goto err_miss_siram_property;
}
......
drivers/soc/qcom/apr.c
View file @ b27186ab
......@@ -219,7 +219,7 @@ static int apr_add_device(struct device *dev, struct device_node *np,
adev->domain_id = id->domain_id;
adev->version = id->svc_version;
if (np)
strncpy(adev->name, np->name, APR_NAME_SIZE);
snprintf(adev->name, APR_NAME_SIZE, "%pOFn", np);
else
strncpy(adev->name, id->name, APR_NAME_SIZE);
......
drivers/soc/rockchip/pm_domains.c
View file @ b27186ab
......@@ -392,21 +392,21 @@ static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu,
error = of_property_read_u32(node, "reg", &id);
if (error) {
dev_err(pmu->dev,
"%s: failed to retrieve domain id (reg): %d\n",
node->name, error);
"%pOFn: failed to retrieve domain id (reg): %d\n",
node, error);
return -EINVAL;
}
if (id >= pmu->info->num_domains) {
dev_err(pmu->dev, "%s: invalid domain id %d\n",
node->name, id);
dev_err(pmu->dev, "%pOFn: invalid domain id %d\n",
node, id);
return -EINVAL;
}
pd_info = &pmu->info->domain_info[id];
if (!pd_info) {
dev_err(pmu->dev, "%s: undefined domain id %d\n",
node->name, id);
dev_err(pmu->dev, "%pOFn: undefined domain id %d\n",
node, id);
return -EINVAL;
}
......@@ -424,8 +424,8 @@ static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu,
if (!pd->clks)
return -ENOMEM;
} else {
dev_dbg(pmu->dev, "%s: doesn't have clocks: %d\n",
node->name, pd->num_clks);
dev_dbg(pmu->dev, "%pOFn: doesn't have clocks: %d\n",
node, pd->num_clks);
pd->num_clks = 0;
}
......@@ -434,8 +434,8 @@ static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu,
if (IS_ERR(pd->clks[i].clk)) {
error = PTR_ERR(pd->clks[i].clk);
dev_err(pmu->dev,
"%s: failed to get clk at index %d: %d\n",
node->name, i, error);
"%pOFn: failed to get clk at index %d: %d\n",
node, i, error);
return error;
}
}
......@@ -486,8 +486,8 @@ static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu,
error = rockchip_pd_power(pd, true);
if (error) {
dev_err(pmu->dev,
"failed to power on domain '%s': %d\n",
node->name, error);
"failed to power on domain '%pOFn': %d\n",
node, error);
goto err_unprepare_clocks;
}
......@@ -575,24 +575,24 @@ static int rockchip_pm_add_subdomain(struct rockchip_pmu *pmu,
error = of_property_read_u32(parent, "reg", &idx);
if (error) {
dev_err(pmu->dev,
"%s: failed to retrieve domain id (reg): %d\n",
parent->name, error);
"%pOFn: failed to retrieve domain id (reg): %d\n",
parent, error);
goto err_out;
}
parent_domain = pmu->genpd_data.domains[idx];
error = rockchip_pm_add_one_domain(pmu, np);
if (error) {
dev_err(pmu->dev, "failed to handle node %s: %d\n",
np->name, error);
dev_err(pmu->dev, "failed to handle node %pOFn: %d\n",
np, error);
goto err_out;
}
error = of_property_read_u32(np, "reg", &idx);
if (error) {
dev_err(pmu->dev,
"%s: failed to retrieve domain id (reg): %d\n",
np->name, error);
"%pOFn: failed to retrieve domain id (reg): %d\n",
np, error);
goto err_out;
}
child_domain = pmu->genpd_data.domains[idx];
......@@ -683,16 +683,16 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev)
for_each_available_child_of_node(np, node) {
error = rockchip_pm_add_one_domain(pmu, node);
if (error) {
dev_err(dev, "failed to handle node %s: %d\n",
node->name, error);
dev_err(dev, "failed to handle node %pOFn: %d\n",
node, error);
of_node_put(node);
goto err_out;
}
error = rockchip_pm_add_subdomain(pmu, node);
if (error < 0) {
dev_err(dev, "failed to handle subdomain node %s: %d\n",
node->name, error);
dev_err(dev, "failed to handle subdomain node %pOFn: %d\n",
node, error);
of_node_put(node);
goto err_out;
}
......
drivers/soc/tegra/pmc.c
View file @ b27186ab
......@@ -796,7 +796,7 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
id = tegra_powergate_lookup(pmc, np->name);
if (id < 0) {
pr_err("powergate lookup failed for %s: %d\n", np->name, id);
pr_err("powergate lookup failed for %pOFn: %d\n", np, id);
goto free_mem;
}
......@@ -816,13 +816,13 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
err = tegra_powergate_of_get_clks(pg, np);
if (err < 0) {
pr_err("failed to get clocks for %s: %d\n", np->name, err);
pr_err("failed to get clocks for %pOFn: %d\n", np, err);
goto set_available;
}
err = tegra_powergate_of_get_resets(pg, np, off);
if (err < 0) {
pr_err("failed to get resets for %s: %d\n", np->name, err);
pr_err("failed to get resets for %pOFn: %d\n", np, err);
goto remove_clks;
}
......@@ -851,15 +851,15 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
err = pm_genpd_init(&pg->genpd, NULL, off);
if (err < 0) {
pr_err("failed to initialise PM domain %s: %d\n", np->name,
pr_err("failed to initialise PM domain %pOFn: %d\n", np,
err);
goto remove_resets;
}
err = of_genpd_add_provider_simple(np, &pg->genpd);
if (err < 0) {
pr_err("failed to add PM domain provider for %s: %d\n",
np->name, err);
pr_err("failed to add PM domain provider for %pOFn: %d\n",
np, err);
goto remove_genpd;
}
......
drivers/soc/ti/knav_dma.c
View file @ b27186ab
......@@ -544,15 +544,15 @@ static void __iomem *pktdma_get_regs(struct knav_dma_device *dma,
ret = of_address_to_resource(node, index, &res);
if (ret) {
dev_err(dev, "Can't translate of node(%s) address for index(%d)\n",
node->name, index);
dev_err(dev, "Can't translate of node(%pOFn) address for index(%d)\n",
node, index);
return ERR_PTR(ret);
}
regs = devm_ioremap_resource(kdev->dev, &res);
if (IS_ERR(regs))
dev_err(dev, "Failed to map register base for index(%d) node(%s)\n",
index, node->name);
dev_err(dev, "Failed to map register base for index(%d) node(%pOFn)\n",
index, node);
if (_size)
*_size = resource_size(&res);
......
drivers/soc/ti/knav_qmss_queue.c
View file @ b27186ab
......@@ -1382,15 +1382,15 @@ static void __iomem *knav_queue_map_reg(struct knav_device *kdev,
ret = of_address_to_resource(node, index, &res);
if (ret) {
dev_err(kdev->dev, "Can't translate of node(%s) address for index(%d)\n",
node->name, index);
dev_err(kdev->dev, "Can't translate of node(%pOFn) address for index(%d)\n",
node, index);
return ERR_PTR(ret);
}
regs = devm_ioremap_resource(kdev->dev, &res);
if (IS_ERR(regs))
dev_err(kdev->dev, "Failed to map register base for index(%d) node(%s)\n",
index, node->name);
dev_err(kdev->dev, "Failed to map register base for index(%d) node(%pOFn)\n",
index, node);
return regs;
}
......
drivers/video/fbdev/fsl-diu-fb.c
View file @ b27186ab
......@@ -1925,7 +1925,7 @@ static int __init fsl_diu_init(void)
pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n");
#ifdef CONFIG_NOT_COHERENT_CACHE
np = of_find_node_by_type(NULL, "cpu");
np = of_get_cpu_node(0, NULL);
if (!np) {
pr_err("fsl-diu-fb: can't find 'cpu' device node\n");
return -ENODEV;
......
include/dt-bindings/clock/exynos3250.h
View file @ b27186ab
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* Author: Tomasz Figa <t.figa@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Device Tree binding constants for Samsung Exynos3250 clock controllers.
*/
......
include/dt-bindings/clock/exynos4.h
View file @ b27186ab
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* Author: Andrzej Hajda <a.hajda@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Device Tree binding constants for Exynos4 clock controller.
*/
*/
#ifndef _DT_BINDINGS_CLOCK_EXYNOS_4_H
#define _DT_BINDINGS_CLOCK_EXYNOS_4_H
......
include/dt-bindings/clock/exynos5250.h
View file @ b27186ab
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* Author: Andrzej Hajda <a.hajda@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Device Tree binding constants for Exynos5250 clock controller.
*/
*/
#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5250_H
#define _DT_BINDINGS_CLOCK_EXYNOS_5250_H
......
include/dt-bindings/clock/exynos5260-clk.h
View file @ b27186ab
This diff is collapsed.
include/dt-bindings/clock/exynos5410.h
View file @ b27186ab
This diff is collapsed.
include/dt-bindings/clock/exynos5420.h
View file @ b27186ab
This diff is collapsed.
include/dt-bindings/clock/exynos5433.h
View file @ b27186ab
This diff is collapsed.
include/dt-bindings/clock/exynos7-clk.h
View file @ b27186ab
This diff is collapsed.
include/dt-bindings/clock/s3c2410.h
View file @ b27186ab
This diff is collapsed.
include/dt-bindings/clock/s3c2412.h
View file @ b27186ab
This diff is collapsed.
include/dt-bindings/clock/s3c2443.h
View file @ b27186ab
This diff is collapsed.
include/linux/libfdt_env.h
View file @ b27186ab
This diff is collapsed.
include/linux/of.h
View file @ b27186ab
This diff is collapsed.
lib/vsprintf.c
View file @ b27186ab
This diff is collapsed.
scripts/Makefile
View file @ b27186ab
This diff is collapsed.
scripts/Makefile.lib
View file @ b27186ab
This diff is collapsed.
scripts/dtc/Makefile
View file @ b27186ab
This diff is collapsed.
scripts/dtc/Makefile.dtc
View file @ b27186ab
This diff is collapsed.
scripts/dtc/checks.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/data.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/dtc-parser.y
View file @ b27186ab
This diff is collapsed.
scripts/dtc/dtc.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/dtc.h
View file @ b27186ab
This diff is collapsed.
scripts/dtc/flattree.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/fdt.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/fdt_addresses.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/fdt_overlay.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/fdt_ro.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/fdt_rw.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/fdt_sw.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/libfdt.h
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/libfdt_env.h
View file @ b27186ab
This diff is collapsed.
scripts/dtc/libfdt/libfdt_internal.h
View file @ b27186ab
This diff is collapsed.
scripts/dtc/livetree.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/treesource.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/update-dtc-source.sh
View file @ b27186ab
This diff is collapsed.
scripts/dtc/util.c
View file @ b27186ab
This diff is collapsed.
scripts/dtc/util.h
View file @ b27186ab
This diff is collapsed.
scripts/dtc/version_gen.h
View file @ b27186ab
This diff is collapsed.
scripts/dtc/yamltree.c 0 → 100644
View file @ b27186ab
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7