Commit b2d4b150 authored by Steve Glendinning's avatar Steve Glendinning Committed by David S. Miller

smsc95xx: enable dynamic autosuspend

This patch enables USB dynamic autosuspend for LAN9500A.  This
saves very little power in itself, but it allows power saving
in upstream hubs/hosts.

The earlier devices in this family (LAN9500/9512/9514) do not
support this feature.
Signed-off-by: default avatarSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e360a8b4
......@@ -55,6 +55,13 @@
#define FEATURE_PHY_NLP_CROSSOVER (0x02)
#define FEATURE_AUTOSUSPEND (0x04)
#define SUSPEND_SUSPEND0 (0x01)
#define SUSPEND_SUSPEND1 (0x02)
#define SUSPEND_SUSPEND2 (0x04)
#define SUSPEND_SUSPEND3 (0x08)
#define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
struct smsc95xx_priv {
u32 mac_cr;
u32 hash_hi;
......@@ -62,6 +69,7 @@ struct smsc95xx_priv {
u32 wolopts;
spinlock_t mac_cr_lock;
u8 features;
u8 suspend_flags;
};
static bool turbo_mode = true;
......@@ -1242,6 +1250,8 @@ static int smsc95xx_enter_suspend0(struct usbnet *dev)
/* read back PM_CTRL */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
pdata->suspend_flags |= SUSPEND_SUSPEND0;
return ret;
}
......@@ -1286,11 +1296,14 @@ static int smsc95xx_enter_suspend1(struct usbnet *dev)
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
pdata->suspend_flags |= SUSPEND_SUSPEND1;
return ret;
}
static int smsc95xx_enter_suspend2(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u32 val;
int ret;
......@@ -1303,9 +1316,97 @@ static int smsc95xx_enter_suspend2(struct usbnet *dev)
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
pdata->suspend_flags |= SUSPEND_SUSPEND2;
return ret;
}
static int smsc95xx_enter_suspend3(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u32 val;
int ret;
ret = smsc95xx_read_reg_nopm(dev, RX_FIFO_INF, &val);
if (ret < 0)
return ret;
if (val & 0xFFFF) {
netdev_info(dev->net, "rx fifo not empty in autosuspend\n");
return -EBUSY;
}
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
return ret;
val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
val |= PM_CTL_SUS_MODE_3 | PM_CTL_RES_CLR_WKP_STS;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
/* clear wol status */
val &= ~PM_CTL_WUPS_;
val |= PM_CTL_WUPS_WOL_;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
pdata->suspend_flags |= SUSPEND_SUSPEND3;
return 0;
}
static int smsc95xx_autosuspend(struct usbnet *dev, u32 link_up)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
int ret;
if (!netif_running(dev->net)) {
/* interface is ifconfig down so fully power down hw */
netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
return smsc95xx_enter_suspend2(dev);
}
if (!link_up) {
/* link is down so enter EDPD mode, but only if device can
* reliably resume from it. This check should be redundant
* as current FEATURE_AUTOSUSPEND parts also support
* FEATURE_PHY_NLP_CROSSOVER but it's included for clarity */
if (!(pdata->features & FEATURE_PHY_NLP_CROSSOVER)) {
netdev_warn(dev->net, "EDPD not supported\n");
return -EBUSY;
}
netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
/* enable PHY wakeup events for if cable is attached */
ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
PHY_INT_MASK_ANEG_COMP_);
if (ret < 0) {
netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
return ret;
}
netdev_info(dev->net, "entering SUSPEND1 mode\n");
return smsc95xx_enter_suspend1(dev);
}
/* enable PHY wakeup events so we remote wakeup if cable is pulled */
ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
PHY_INT_MASK_LINK_DOWN_);
if (ret < 0) {
netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
return ret;
}
netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
return smsc95xx_enter_suspend3(dev);
}
static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
......@@ -1313,15 +1414,35 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
u32 val, link_up;
int ret;
/* TODO: don't indicate this feature to usb framework if
* our current hardware doesn't have the capability
*/
if ((message.event == PM_EVENT_AUTO_SUSPEND) &&
(!(pdata->features & FEATURE_AUTOSUSPEND))) {
netdev_warn(dev->net, "autosuspend not supported\n");
return -EBUSY;
}
ret = usbnet_suspend(intf, message);
if (ret < 0) {
netdev_warn(dev->net, "usbnet_suspend error\n");
return ret;
}
if (pdata->suspend_flags) {
netdev_warn(dev->net, "error during last resume\n");
pdata->suspend_flags = 0;
}
/* determine if link is up using only _nopm functions */
link_up = smsc95xx_link_ok_nopm(dev);
if (message.event == PM_EVENT_AUTO_SUSPEND) {
ret = smsc95xx_autosuspend(dev, link_up);
goto done;
}
/* if we get this far we're not autosuspending */
/* if no wol options set, or if link is down and we're not waking on
* PHY activity, enter lowest power SUSPEND2 mode
*/
......@@ -1552,12 +1673,18 @@ static int smsc95xx_resume(struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u8 suspend_flags = pdata->suspend_flags;
int ret;
u32 val;
BUG_ON(!dev);
if (pdata->wolopts) {
netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
/* do this first to ensure it's cleared even in error case */
pdata->suspend_flags = 0;
if (suspend_flags & SUSPEND_ALLMODES) {
/* clear wake-up sources */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
if (ret < 0)
......@@ -1741,6 +1868,26 @@ static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
return skb;
}
static int smsc95xx_manage_power(struct usbnet *dev, int on)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
dev->intf->needs_remote_wakeup = on;
if (pdata->features & FEATURE_AUTOSUSPEND)
return 0;
/* this chip revision doesn't support autosuspend */
netdev_info(dev->net, "hardware doesn't support USB autosuspend\n");
if (on)
usb_autopm_get_interface_no_resume(dev->intf);
else
usb_autopm_put_interface(dev->intf);
return 0;
}
static const struct driver_info smsc95xx_info = {
.description = "smsc95xx USB 2.0 Ethernet",
.bind = smsc95xx_bind,
......@@ -1750,6 +1897,7 @@ static const struct driver_info smsc95xx_info = {
.rx_fixup = smsc95xx_rx_fixup,
.tx_fixup = smsc95xx_tx_fixup,
.status = smsc95xx_status,
.manage_power = smsc95xx_manage_power,
.flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
};
......@@ -1857,6 +2005,7 @@ static struct usb_driver smsc95xx_driver = {
.reset_resume = smsc95xx_resume,
.disconnect = usbnet_disconnect,
.disable_hub_initiated_lpm = 1,
.supports_autosuspend = 1,
};
module_usb_driver(smsc95xx_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment