Commit b2e9e1c8 authored by Takashi Sakamoto's avatar Takashi Sakamoto Committed by Takashi Iwai

ALSA: dice: add support for Solid State Logic Duende Classic/Mini

Duende Classic was produced by Solid State Logic in 2006, as a
first model of Duende DSP series. The following model, Duende Mini
was produced in 2008. They are designed to receive isochronous
packets for PCM frames via IEEE 1394 bus, perform signal processing by
downloaded program, then transfer isochronous packets for converted
PCM frames.

These two models includes the same embedded board, consists of several
ICs below:
 - Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus
 - WaveFront semiconductor, DICE II STD ASIC for link/protocol layer
 - Altera MAX 3000A CPLD for programs
 - Analog devices, SHARC ADSP-21363 for signal processing (4 chips)

This commit adds support for the two models to ALSA dice driver. Like
support for the other devices, packet streaming is just available.
Userspace applications should be developed if full features became
available; e.g. program uploader and parameter controller.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': False,
                'chip_ID': 349771402425,
                'cmc': True,
                'cyc_clk_acc': 255,
                'generation': 1,
                'imc': True,
                'isc': True,
                'link_spd': 2,
                'max_ROM': 1,
                'max_rec': 512,
                'name': '1394',
                'node_vendor_ID': 20674,
                'pmc': False},
  'root-directory': [ ['VENDOR', 20674],
                      ['DESCRIPTOR', 'Solid State Logic'],
                      ['MODEL', 112],
                      ['DESCRIPTOR', 'Duende board'],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': True},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 20674],
                          ['VERSION', 1],
                          ['MODEL', 112],
                          ['DESCRIPTOR', 'Duende board']]]]}
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 315d9f1b
......@@ -18,6 +18,7 @@ MODULE_LICENSE("GPL v2");
#define OUI_ALESIS 0x000595
#define OUI_MAUDIO 0x000d6c
#define OUI_MYTEK 0x001ee8
#define OUI_SSL 0x0050c2 // Actually ID reserved by IEEE.
#define DICE_CATEGORY_ID 0x04
#define WEISS_CATEGORY_ID 0x00
......@@ -196,7 +197,7 @@ static int dice_probe(struct fw_unit *unit,
struct snd_dice *dice;
int err;
if (!entry->driver_data) {
if (!entry->driver_data && entry->vendor_id != OUI_SSL) {
err = check_dice_category(unit);
if (err < 0)
return -ENODEV;
......@@ -361,6 +362,15 @@ static const struct ieee1394_device_id dice_id_table[] = {
.model_id = 0x000002,
.driver_data = (kernel_ulong_t)snd_dice_detect_mytek_formats,
},
// Solid State Logic, Duende Classic and Mini.
// NOTE: each field of GUID in config ROM is not compliant to standard
// DICE scheme.
{
.match_flags = IEEE1394_MATCH_VENDOR_ID |
IEEE1394_MATCH_MODEL_ID,
.vendor_id = OUI_SSL,
.model_id = 0x000070,
},
{
.match_flags = IEEE1394_MATCH_VERSION,
.version = DICE_INTERFACE,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment