arm64: dts: mt8183: add thermal zone node

Add thermal zone node to Mediatek MT8183 dts file.

Evaluate the thermal zone every 500ms while not cooling
and every 100ms when passive cooling is performed.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

arch/arm64/boot/dts/mediatek/mt8183.dtsi

@@ -657,6 +657,87 @@ spi0: spi@1100a000 {
 			status = "disabled";
 		};
 
+		thermal: thermal@1100b000 {
+			#thermal-sensor-cells = <1>;
+			compatible = "mediatek,mt8183-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_THERM>,
+				 <&infracfg CLK_INFRA_AUXADC>;
+			clock-names = "therm", "auxadc";
+			resets = <&infracfg  MT8183_INFRACFG_AO_THERM_SW_RST>;
+			interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu_thermal {
+				polling-delay-passive = <100>;
+				polling-delay = <500>;
+				thermal-sensors = <&thermal 0>;
+				sustainable-power = <5000>;
+			};
+
+			/* The tzts1 ~ tzts6 don't need to polling */
+			/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+			tzts1: tzts1 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 1>;
+				sustainable-power = <5000>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts2: tzts2 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 2>;
+				sustainable-power = <5000>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts3: tzts3 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 3>;
+				sustainable-power = <5000>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts4: tzts4 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 4>;
+				sustainable-power = <5000>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tzts5: tzts5 {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 5>;
+				sustainable-power = <5000>;
+				trips {};
+				cooling-maps {};
+			};
+
+			tztsABB: tztsABB {
+				polling-delay-passive = <0>;
+				polling-delay = <0>;
+				thermal-sensors = <&thermal 6>;
+				sustainable-power = <5000>;
+				trips {};
+				cooling-maps {};
+			};
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -940,6 +1021,10 @@ efuse: efuse@11f10000 {
 			reg = <0 0x11f10000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
+
 			mipi_tx_calibration: calib@190 {
 				reg = <0x190 0xc>;
 			};