Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  MAINTAINERS: update DMFE and wireless drivers mailing list
  ucc_geth: Add support to local-mac-address property
  ucc_geth: Remove obsolete workaround of link speed change
  cxgb3: sysfs attributes in -mm tree
  Add Attansic L1 ethernet driver.

MAINTAINERS

@@ -1114,7 +1114,7 @@ S:	Supported
 DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
 P:	Tobias Ringstrom
 M:	tori@unhappy.mine.nu
-L:	linux-kernel@vger.kernel.org
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 DOCBOOK FOR DOCUMENTATION
@@ -2361,7 +2361,7 @@ S:	Maintained
 NETWORKING [WIRELESS]
 P:	John W. Linville
 M:	linville@tuxdriver.com
-L:	netdev@vger.kernel.org
+L:	linux-wireless@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
 S:	Maintained
 

drivers/net/Kconfig

@@ -2335,6 +2335,17 @@ config QLA3XXX
 	  To compile this driver as a module, choose M here: the module
 	  will be called qla3xxx.
 
+config ATL1
+	tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on NET_PCI && PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This driver supports the Attansic L1 gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1.
+
 endmenu
 
 #

drivers/net/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_CHELSIO_T1) += chelsio/
 obj-$(CONFIG_CHELSIO_T3) += cxgb3/
 obj-$(CONFIG_EHEA) += ehea/
 obj-$(CONFIG_BONDING) += bonding/
+obj-$(CONFIG_ATL1) += atl1/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 
 gianfar_driver-objs := gianfar.o \

drivers/net/atl1/Makefile

+obj-$(CONFIG_ATL1)	+= atl1.o
+atl1-y			+= atl1_main.o atl1_hw.o atl1_ethtool.o atl1_param.o

drivers/net/atl1/atl1.h

+/*
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 Chris Snook <csnook@redhat.com>
+ * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _ATL1_H_
+#define _ATL1_H_
+
+#include <linux/types.h>
+#include <linux/if_vlan.h>
+
+#include "atl1_hw.h"
+
+/* function prototypes needed by multiple files */
+s32 atl1_up(struct atl1_adapter *adapter);
+void atl1_down(struct atl1_adapter *adapter);
+int atl1_reset(struct atl1_adapter *adapter);
+s32 atl1_setup_ring_resources(struct atl1_adapter *adapter);
+void atl1_free_ring_resources(struct atl1_adapter *adapter);
+
+extern char atl1_driver_name[];
+extern char atl1_driver_version[];
+extern const struct ethtool_ops atl1_ethtool_ops;
+
+struct atl1_adapter;
+
+#define ATL1_MAX_INTR		3
+
+#define ATL1_DEFAULT_TPD	256
+#define ATL1_MAX_TPD		1024
+#define ATL1_MIN_TPD		64
+#define ATL1_DEFAULT_RFD	512
+#define ATL1_MIN_RFD		128
+#define ATL1_MAX_RFD		2048
+
+#define ATL1_GET_DESC(R, i, type)	(&(((type *)((R)->desc))[i]))
+#define ATL1_RFD_DESC(R, i)	ATL1_GET_DESC(R, i, struct rx_free_desc)
+#define ATL1_TPD_DESC(R, i)	ATL1_GET_DESC(R, i, struct tx_packet_desc)
+#define ATL1_RRD_DESC(R, i)	ATL1_GET_DESC(R, i, struct rx_return_desc)
+
+/*
+ * Some workarounds require millisecond delays and are run during interrupt
+ * context.  Most notably, when establishing link, the phy may need tweaking
+ * but cannot process phy register reads/writes faster than millisecond
+ * intervals...and we establish link due to a "link status change" interrupt.
+ */
+
+/*
+ * wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct atl1_buffer {
+	struct sk_buff *skb;
+	u16 length;
+	u16 alloced;
+	dma_addr_t dma;
+};
+
+#define MAX_TX_BUF_LEN		0x3000	/* 12KB */
+
+struct atl1_tpd_ring {
+	void *desc;		/* pointer to the descriptor ring memory */
+	dma_addr_t dma;		/* physical adress of the descriptor ring */
+	u16 size;		/* length of descriptor ring in bytes */
+	u16 count;		/* number of descriptors in the ring */
+	u16 hw_idx;		/* hardware index */
+	atomic_t next_to_clean;
+	atomic_t next_to_use;
+	struct atl1_buffer *buffer_info;
+};
+
+struct atl1_rfd_ring {
+	void *desc;
+	dma_addr_t dma;
+	u16 size;
+	u16 count;
+	atomic_t next_to_use;
+	u16 next_to_clean;
+	struct atl1_buffer *buffer_info;
+};
+
+struct atl1_rrd_ring {
+	void *desc;
+	dma_addr_t dma;
+	unsigned int size;
+	u16 count;
+	u16 next_to_use;
+	atomic_t next_to_clean;
+};
+
+struct atl1_ring_header {
+	void *desc;		/* pointer to the descriptor ring memory */
+	dma_addr_t dma;		/* physical adress of the descriptor ring */
+	unsigned int size;	/* length of descriptor ring in bytes */
+};
+
+struct atl1_cmb {
+	struct coals_msg_block *cmb;
+	dma_addr_t dma;
+};
+
+struct atl1_smb {
+	struct stats_msg_block *smb;
+	dma_addr_t dma;
+};
+
+/* Statistics counters */
+struct atl1_sft_stats {
+	u64 rx_packets;
+	u64 tx_packets;
+	u64 rx_bytes;
+	u64 tx_bytes;
+	u64 multicast;
+	u64 collisions;
+	u64 rx_errors;
+	u64 rx_length_errors;
+	u64 rx_crc_errors;
+	u64 rx_frame_errors;
+	u64 rx_fifo_errors;
+	u64 rx_missed_errors;
+	u64 tx_errors;
+	u64 tx_fifo_errors;
+	u64 tx_aborted_errors;
+	u64 tx_window_errors;
+	u64 tx_carrier_errors;
+
+	u64 tx_pause;		/* num Pause packet transmitted. */
+	u64 excecol;		/* num tx packets aborted due to excessive collisions. */
+	u64 deffer;		/* num deferred tx packets */
+	u64 scc;		/* num packets subsequently transmitted successfully w/ single prior collision. */
+	u64 mcc;		/* num packets subsequently transmitted successfully w/ multiple prior collisions. */
+	u64 latecol;		/* num tx packets  w/ late collisions. */
+	u64 tx_underun;		/* num tx packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+	u64 tx_trunc;		/* num tx packets truncated due to size exceeding MTU, regardless whether truncated by Selene or not. (The name doesn't really reflect the meaning in this case.) */
+	u64 rx_pause;		/* num Pause packets received. */
+	u64 rx_rrd_ov;
+	u64 rx_trunc;
+};
+
+/* board specific private data structure */
+#define ATL1_REGS_LEN	8
+
+/* Structure containing variables used by the shared code */
+struct atl1_hw {
+	u8 __iomem *hw_addr;
+	struct atl1_adapter *back;
+	enum atl1_dma_order dma_ord;
+	enum atl1_dma_rcb rcb_value;
+	enum atl1_dma_req_block dmar_block;
+	enum atl1_dma_req_block dmaw_block;
+	u8 preamble_len;
+	u8 max_retry;		/* Retransmission maximum, after which the packet will be discarded */
+	u8 jam_ipg;		/* IPG to start JAM for collision based flow control in half-duplex mode. In units of 8-bit time */
+	u8 ipgt;		/* Desired back to back inter-packet gap. The default is 96-bit time */
+	u8 min_ifg;		/* Minimum number of IFG to enforce in between RX frames. Frame gap below such IFP is dropped */
+	u8 ipgr1;		/* 64bit Carrier-Sense window */
+	u8 ipgr2;		/* 96-bit IPG window */
+	u8 tpd_burst;		/* Number of TPD to prefetch in cache-aligned burst. Each TPD is 16 bytes long */
+	u8 rfd_burst;		/* Number of RFD to prefetch in cache-aligned burst. Each RFD is 12 bytes long */
+	u8 rfd_fetch_gap;
+	u8 rrd_burst;		/* Threshold number of RRDs that can be retired in a burst. Each RRD is 16 bytes long */
+	u8 tpd_fetch_th;
+	u8 tpd_fetch_gap;
+	u16 tx_jumbo_task_th;
+	u16 txf_burst;		/* Number of data bytes to read in a cache-aligned burst. Each SRAM entry is
+				   8 bytes long */
+	u16 rx_jumbo_th;	/* Jumbo packet size for non-VLAN packet. VLAN packets should add 4 bytes */
+	u16 rx_jumbo_lkah;
+	u16 rrd_ret_timer;	/* RRD retirement timer. Decrement by 1 after every 512ns passes. */
+	u16 lcol;		/* Collision Window */
+
+	u16 cmb_tpd;
+	u16 cmb_rrd;
+	u16 cmb_rx_timer;
+	u16 cmb_tx_timer;
+	u32 smb_timer;
+	u16 media_type;
+	u16 autoneg_advertised;
+	u16 pci_cmd_word;
+
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg;
+
+	u32 mem_rang;
+	u32 txcw;
+	u32 max_frame_size;
+	u32 min_frame_size;
+	u32 mc_filter_type;
+	u32 num_mc_addrs;
+	u32 collision_delta;
+	u32 tx_packet_delta;
+	u16 phy_spd_default;
+
+	u16 dev_rev;
+	u8 revision_id;
+
+	/* spi flash */
+	u8 flash_vendor;
+
+	u8 dma_fairness;
+	u8 mac_addr[ETH_ALEN];
+	u8 perm_mac_addr[ETH_ALEN];
+
+	/* bool phy_preamble_sup; */
+	bool phy_configured;
+};
+
+struct atl1_adapter {
+	/* OS defined structs */
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+	struct net_device_stats net_stats;
+	struct atl1_sft_stats soft_stats;
+
+	struct vlan_group *vlgrp;
+	u32 rx_buffer_len;
+	u32 wol;
+	u16 link_speed;
+	u16 link_duplex;
+	spinlock_t lock;
+	atomic_t irq_sem;
+	struct work_struct tx_timeout_task;
+	struct work_struct link_chg_task;
+	struct work_struct pcie_dma_to_rst_task;
+	struct timer_list watchdog_timer;
+	struct timer_list phy_config_timer;
+	bool phy_timer_pending;
+
+	bool mac_disabled;
+
+	/* All descriptor rings' memory */
+	struct atl1_ring_header ring_header;
+
+	/* TX */
+	struct atl1_tpd_ring tpd_ring;
+	spinlock_t mb_lock;
+
+	/* RX */
+	struct atl1_rfd_ring rfd_ring;
+	struct atl1_rrd_ring rrd_ring;
+	u64 hw_csum_err;
+	u64 hw_csum_good;
+
+	u32 gorcl;
+	u64 gorcl_old;
+
+	/* Interrupt Moderator timer ( 2us resolution) */
+	u16 imt;
+	/* Interrupt Clear timer (2us resolution) */
+	u16 ict;
+
+	/* MII interface info */
+	struct mii_if_info mii;
+
+	/* structs defined in atl1_hw.h */
+	u32 bd_number;		/* board number */
+	bool pci_using_64;
+	struct atl1_hw hw;
+	struct atl1_smb smb;
+	struct atl1_cmb cmb;
+
+	u32 pci_state[16];
+};
+
+#endif	/* _ATL1_H_ */

drivers/net/ucc_geth_phy.c

@@ -376,6 +376,8 @@ static int marvell_init(struct ugeth_mii_info *mii_info)
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
 	ucc_geth_phy_write(mii_info, 0x14, 0x0cd2);
+	ucc_geth_phy_write(mii_info, 0x1b,
+		(ucc_geth_phy_read(mii_info, 0x1b) & ~0x000f) | 0x000b);
 	ucc_geth_phy_write(mii_info, MII_BMCR,
 		  ucc_geth_phy_read(mii_info, MII_BMCR) | BMCR_RESET);
 	msleep(4000);

include/linux/pci_ids.h

@@ -2073,6 +2073,8 @@
 
 #define PCI_VENDOR_ID_PASEMI		0x1959
 
+#define PCI_VENDOR_ID_ATTANSIC		0x1969
+
 #define PCI_VENDOR_ID_JMICRON		0x197B
 #define PCI_DEVICE_ID_JMICRON_JMB360	0x2360
 #define PCI_DEVICE_ID_JMICRON_JMB361	0x2361