Commit b37e3534 authored by Maxime Ripard's avatar Maxime Ripard Committed by Vinod Koul

dt-bindings: dmaengine: Add YAML schemas for the generic DMA bindings

The DMA controllers and consumers have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>

Link: https://lore.kernel.org/r/20190720092607.31095-1-maxime.ripard@bootlin.comSigned-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent aa3c6ce4
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/dma/dma-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: DMA Engine Generic Binding
maintainers:
- Vinod Koul <vkoul@kernel.org>
description:
Generic binding to provide a way for a driver using DMA Engine to
retrieve the DMA request or channel information that goes from a
hardware device to a DMA controller.
select: false
properties:
"#dma-cells":
minimum: 1
# Should be enough
maximum: 255
description:
Used to provide DMA controller specific information.
dma-channel-masks:
$ref: /schemas/types.yaml#definitions/uint32
description:
Bitmask of available DMA channels in ascending order that are
not reserved by firmware and are available to the
kernel. i.e. first channel corresponds to LSB.
dma-channels:
$ref: /schemas/types.yaml#definitions/uint32
description:
Number of DMA channels supported by the controller.
dma-requests:
$ref: /schemas/types.yaml#definitions/uint32
description:
Number of DMA request signals supported by the controller.
required:
- "#dma-cells"
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/dma/dma-controller.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: DMA Controller Generic Binding
maintainers:
- Vinod Koul <vkoul@kernel.org>
allOf:
- $ref: "dma-common.yaml#"
# Everything else is described in the common file
properties:
$nodename:
pattern: "^dma-controller(@.*)?$"
examples:
- |
dma: dma-controller@48000000 {
compatible = "ti,omap-sdma";
reg = <0x48000000 0x1000>;
interrupts = <0 12 0x4
0 13 0x4
0 14 0x4
0 15 0x4>;
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
dma-channel-mask = <0xfffe>;
};
...
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/dma/dma-router.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: DMA Router Generic Binding
maintainers:
- Vinod Koul <vkoul@kernel.org>
allOf:
- $ref: "dma-common.yaml#"
description:
DMA routers are transparent IP blocks used to route DMA request
lines from devices to the DMA controller. Some SoCs (like TI DRA7x)
have more peripherals integrated with DMA requests than what the DMA
controller can handle directly.
properties:
$nodename:
pattern: "^dma-router(@.*)?$"
dma-masters:
$ref: /schemas/types.yaml#definitions/phandle-array
description:
Array of phandles to the DMA controllers the router can direct
the signal to.
dma-requests:
description:
Number of incoming request lines the router can handle.
required:
- "#dma-cells"
- dma-masters
examples:
- |
sdma_xbar: dma-router@4a002b78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0x4a002b78 0xfc>;
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
dma-masters = <&sdma>;
};
...
* Generic DMA Controller and DMA request bindings
Generic binding to provide a way for a driver using DMA Engine to retrieve the
DMA request or channel information that goes from a hardware device to a DMA
controller.
* DMA controller
Required property:
- #dma-cells: Must be at least 1. Used to provide DMA controller
specific information. See DMA client binding below for
more details.
Optional properties:
- dma-channels: Number of DMA channels supported by the controller.
- dma-requests: Number of DMA request signals supported by the
controller.
- dma-channel-mask: Bitmask of available DMA channels in ascending order
that are not reserved by firmware and are available to
the kernel. i.e. first channel corresponds to LSB.
Example:
dma: dma@48000000 {
compatible = "ti,omap-sdma";
reg = <0x48000000 0x1000>;
interrupts = <0 12 0x4
0 13 0x4
0 14 0x4
0 15 0x4>;
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
dma-channel-mask = <0xfffe>
};
* DMA router
DMA routers are transparent IP blocks used to route DMA request lines from
devices to the DMA controller. Some SoCs (like TI DRA7x) have more peripherals
integrated with DMA requests than what the DMA controller can handle directly.
Required property:
- dma-masters: phandle of the DMA controller or list of phandles for
the DMA controllers the router can direct the signal to.
- #dma-cells: Must be at least 1. Used to provide DMA router specific
information. See DMA client binding below for more
details.
Optional properties:
- dma-requests: Number of incoming request lines the router can handle.
- In the node pointed by the dma-masters:
- dma-requests: The router driver might need to look for this in order
to configure the routing.
Example:
sdma_xbar: dma-router@4a002b78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0x4a002b78 0xfc>;
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
dma-masters = <&sdma>;
};
* DMA client
Client drivers should specify the DMA property using a phandle to the controller
followed by DMA controller specific data.
Required property:
- dmas: List of one or more DMA specifiers, each consisting of
- A phandle pointing to DMA controller node
- A number of integer cells, as determined by the
#dma-cells property in the node referenced by phandle
containing DMA controller specific information. This
typically contains a DMA request line number or a
channel number, but can contain any data that is
required for configuring a channel.
- dma-names: Contains one identifier string for each DMA specifier in
the dmas property. The specific strings that can be used
are defined in the binding of the DMA client device.
Multiple DMA specifiers can be used to represent
alternatives and in this case the dma-names for those
DMA specifiers must be identical (see examples).
Examples:
1. A device with one DMA read channel, one DMA write channel:
i2c1: i2c@1 {
...
dmas = <&dma 2 /* read channel */
&dma 3>; /* write channel */
dma-names = "rx", "tx";
...
};
2. A single read-write channel with three alternative DMA controllers:
dmas = <&dma1 5
&dma2 7
&dma3 2>;
dma-names = "rx-tx", "rx-tx", "rx-tx";
3. A device with three channels, one of which has two alternatives:
dmas = <&dma1 2 /* read channel */
&dma1 3 /* write channel */
&dma2 0 /* error read */
&dma3 0>; /* alternative error read */
dma-names = "rx", "tx", "error", "error";
This file has been moved to dma-controller.yaml.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment