Commit b3e1f4be authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Maxime Ripard

ARM: dts: sun9i: cubieboard4: Add GPIO pin-bank regulator supplies

The Cubieboard 4 has the PMIC providing voltage to all the pin-bank
supply rails from its various regulator outputs. All pin-banks that
have supply rails are accounted for. PN pin-bank does not have a
supply rail.

Also remove any "regulator-always-on" properties from regulators that
were only marked to provide pin-bank power.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
parent 507b1784
......@@ -183,10 +183,26 @@ &osc32k {
clocks = <&ac100_rtc 0>;
};
&pio {
vcc-pa-supply = <&reg_ldo_io1>;
vcc-pb-supply = <&reg_aldo2>;
vcc-pc-supply = <&reg_dcdc1>;
vcc-pd-supply = <&reg_dc1sw>;
vcc-pe-supply = <&reg_eldo2>;
vcc-pf-supply = <&reg_dcdc1>;
vcc-pg-supply = <&reg_ldo_io0>;
vcc-ph-supply = <&reg_dcdc1>;
};
&r_ir {
status = "okay";
};
&r_pio {
vcc-pl-supply = <&reg_dldo2>;
vcc-pm-supply = <&reg_eldo3>;
};
&r_rsb {
status = "okay";
......@@ -217,6 +233,10 @@ aldo3 {
/* unused */
};
reg_dc1sw: dc1sw {
regulator-name = "vcc-pd";
};
reg_dc5ldo: dc5ldo {
regulator-always-on;
regulator-min-microvolt = <800000>;
......@@ -271,7 +291,6 @@ reg_dldo1: dldo1 {
};
reg_dldo2: dldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pl";
......@@ -290,14 +309,12 @@ reg_eldo2: eldo2 {
};
reg_eldo3: eldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pm-codec-io1";
};
reg_ldo_io0: ldo_io0 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment