mt76: add usb support to mt76 layer

This will be used by drivers for MT76x2u based devices

Tested-by: <cug_yangyuancong@hotmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/mediatek/mt76/Kconfig

 config MT76_CORE
 	tristate
 
+config MT76_USB
+	tristate
+	depends on MT76_CORE
+
 config MT76x2_COMMON
 	tristate
 	depends on MT76_CORE

drivers/net/wireless/mediatek/mt76/Makefile

 obj-$(CONFIG_MT76_CORE) += mt76.o
+obj-$(CONFIG_MT76_USB) += mt76-usb.o
 obj-$(CONFIG_MT76x2_COMMON) += mt76x2-common.o
 obj-$(CONFIG_MT76x2E) += mt76x2e.o
 
 mt76-y := \
 	mmio.o util.o trace.o dma.o mac80211.o debugfs.o eeprom.o tx.o agg-rx.o
 
+mt76-usb-y := usb.o usb_trace.o usb_mcu.o
+
 CFLAGS_trace.o := -I$(src)
+CFLAGS_usb_trace.o := -I$(src)
 
 mt76x2-common-y := \
 	mt76x2_eeprom.o mt76x2_tx_common.o mt76x2_mac_common.o \

drivers/net/wireless/mediatek/mt76/dma.h

@@ -53,6 +53,11 @@
 #define MT_MCU_MSG_TYPE			GENMASK(31, 30)
 #define MT_MCU_MSG_TYPE_CMD		BIT(30)
 
+#define MT_DMA_HDR_LEN			4
+#define MT_RX_INFO_LEN			4
+#define MT_FCE_INFO_LEN			4
+#define MT_RX_RXWI_LEN			32
+
 struct mt76_desc {
 	__le32 buf0;
 	__le32 ctrl;

drivers/net/wireless/mediatek/mt76/mt76.h

@@ -22,6 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/skbuff.h>
 #include <linux/leds.h>
+#include <linux/usb.h>
 #include <net/mac80211.h>
 #include "util.h"
 
@@ -63,12 +64,22 @@ struct mt76_queue_buf {
 	int len;
 };
 
+struct mt76u_buf {
+	struct mt76_dev *dev;
+	struct urb *urb;
+	size_t len;
+	bool done;
+};
+
 struct mt76_queue_entry {
 	union {
 		void *buf;
 		struct sk_buff *skb;
 	};
-	struct mt76_txwi_cache *txwi;
+	union {
+		struct mt76_txwi_cache *txwi;
+		struct mt76u_buf ubuf;
+	};
 	bool schedule;
 };
 
@@ -89,6 +100,7 @@ struct mt76_queue {
 	struct list_head swq;
 	int swq_queued;
 
+	u16 first;
 	u16 head;
 	u16 tail;
 	int ndesc;
@@ -195,6 +207,8 @@ enum {
 	MT76_SCANNING,
 	MT76_RESET,
 	MT76_OFFCHANNEL,
+	MT76_REMOVED,
+	MT76_READING_STATS,
 };
 
 struct mt76_hw_cap {
@@ -215,6 +229,8 @@ struct mt76_driver_ops {
 	void (*tx_complete_skb)(struct mt76_dev *dev, struct mt76_queue *q,
 				struct mt76_queue_entry *e, bool flush);
 
+	bool (*tx_status_data)(struct mt76_dev *dev, u8 *update);
+
 	void (*rx_skb)(struct mt76_dev *dev, enum mt76_rxq_id q,
 		       struct sk_buff *skb);
 
@@ -234,6 +250,64 @@ struct mt76_sband {
 	struct mt76_channel_state *chan;
 };
 
+/* addr req mask */
+#define MT_VEND_TYPE_EEPROM	BIT(31)
+#define MT_VEND_TYPE_CFG	BIT(30)
+#define MT_VEND_TYPE_MASK	(MT_VEND_TYPE_EEPROM | MT_VEND_TYPE_CFG)
+
+#define MT_VEND_ADDR(type, n)	(MT_VEND_TYPE_##type | (n))
+enum mt_vendor_req {
+	MT_VEND_DEV_MODE =	0x1,
+	MT_VEND_WRITE =		0x2,
+	MT_VEND_MULTI_WRITE =	0x6,
+	MT_VEND_MULTI_READ =	0x7,
+	MT_VEND_READ_EEPROM =	0x9,
+	MT_VEND_WRITE_FCE =	0x42,
+	MT_VEND_WRITE_CFG =	0x46,
+	MT_VEND_READ_CFG =	0x47,
+};
+
+enum mt76u_in_ep {
+	MT_EP_IN_PKT_RX,
+	MT_EP_IN_CMD_RESP,
+	__MT_EP_IN_MAX,
+};
+
+enum mt76u_out_ep {
+	MT_EP_OUT_INBAND_CMD,
+	MT_EP_OUT_AC_BK,
+	MT_EP_OUT_AC_BE,
+	MT_EP_OUT_AC_VI,
+	MT_EP_OUT_AC_VO,
+	MT_EP_OUT_HCCA,
+	__MT_EP_OUT_MAX,
+};
+
+#define MT_SG_MAX_SIZE		8
+#define MT_NUM_TX_ENTRIES	256
+#define MT_NUM_RX_ENTRIES	128
+#define MCU_RESP_URB_SIZE	1024
+struct mt76_usb {
+	struct mutex usb_ctrl_mtx;
+	u8 data[32];
+
+	struct tasklet_struct rx_tasklet;
+	struct tasklet_struct tx_tasklet;
+	struct delayed_work stat_work;
+
+	u8 out_ep[__MT_EP_OUT_MAX];
+	u16 out_max_packet;
+	u8 in_ep[__MT_EP_IN_MAX];
+	u16 in_max_packet;
+
+	struct mt76u_mcu {
+		struct mutex mutex;
+		struct completion cmpl;
+		struct mt76u_buf res;
+		u32 msg_seq;
+	} mcu;
+};
+
 struct mt76_dev {
 	struct ieee80211_hw *hw;
 	struct cfg80211_chan_def chandef;
@@ -276,6 +350,8 @@ struct mt76_dev {
 	char led_name[32];
 	bool led_al;
 	u8 led_pin;
+
+	struct mt76_usb usb;
 };
 
 enum mt76_phy_type {
@@ -407,6 +483,14 @@ static inline int mt76_decr(int val, int size)
 	return (val - 1) & (size - 1);
 }
 
+/* Hardware uses mirrored order of queues with Q3
+ * having the highest priority
+ */
+static inline u8 q2hwq(u8 q)
+{
+	return q ^ 0x3;
+}
+
 static inline struct ieee80211_txq *
 mtxq_to_txq(struct mt76_txq *mtxq)
 {
@@ -467,4 +551,61 @@ void mt76_rx_poll_complete(struct mt76_dev *dev, enum mt76_rxq_id q,
 			   struct napi_struct *napi);
 void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames);
 
+/* usb */
+static inline bool mt76u_urb_error(struct urb *urb)
+{
+	return urb->status &&
+	       urb->status != -ECONNRESET &&
+	       urb->status != -ESHUTDOWN &&
+	       urb->status != -ENOENT;
+}
+
+/* Map hardware queues to usb endpoints */
+static inline u8 q2ep(u8 qid)
+{
+	/* TODO: take management packets to queue 5 */
+	return qid + 1;
+}
+
+static inline bool mt76u_check_sg(struct mt76_dev *dev)
+{
+	struct usb_interface *intf = to_usb_interface(dev->dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	return (udev->bus->sg_tablesize > 0 &&
+		(udev->bus->no_sg_constraint ||
+		 udev->speed == USB_SPEED_WIRELESS));
+}
+
+int mt76u_vendor_request(struct mt76_dev *dev, u8 req,
+			 u8 req_type, u16 val, u16 offset,
+			 void *buf, size_t len);
+void mt76u_single_wr(struct mt76_dev *dev, const u8 req,
+		     const u16 offset, const u32 val);
+u32 mt76u_rr(struct mt76_dev *dev, u32 addr);
+void mt76u_wr(struct mt76_dev *dev, u32 addr, u32 val);
+int mt76u_init(struct mt76_dev *dev, struct usb_interface *intf);
+void mt76u_deinit(struct mt76_dev *dev);
+int mt76u_buf_alloc(struct mt76_dev *dev, struct mt76u_buf *buf,
+		    int nsgs, int len, int sglen, gfp_t gfp);
+void mt76u_buf_free(struct mt76u_buf *buf);
+int mt76u_submit_buf(struct mt76_dev *dev, int dir, int index,
+		     struct mt76u_buf *buf, gfp_t gfp,
+		     usb_complete_t complete_fn, void *context);
+int mt76u_submit_rx_buffers(struct mt76_dev *dev);
+int mt76u_alloc_queues(struct mt76_dev *dev);
+void mt76u_stop_queues(struct mt76_dev *dev);
+void mt76u_stop_stat_wk(struct mt76_dev *dev);
+void mt76u_queues_deinit(struct mt76_dev *dev);
+int mt76u_skb_dma_info(struct sk_buff *skb, int port, u32 flags);
+
+int mt76u_mcu_fw_send_data(struct mt76_dev *dev, const void *data,
+			   int data_len, u32 max_payload, u32 offset);
+void mt76u_mcu_complete_urb(struct urb *urb);
+struct sk_buff *mt76u_mcu_msg_alloc(const void *data, int len);
+int mt76u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
+		       int cmd, bool wait_resp);
+void mt76u_mcu_fw_reset(struct mt76_dev *dev);
+int mt76u_mcu_init_rx(struct mt76_dev *dev);
+
 #endif

drivers/net/wireless/mediatek/mt76/usb_mcu.c

+/*
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/firmware.h>
+
+#include "mt76.h"
+#include "dma.h"
+
+#define MT_CMD_HDR_LEN			4
+
+#define MT_FCE_DMA_ADDR			0x0230
+#define MT_FCE_DMA_LEN			0x0234
+
+#define MT_TX_CPU_FROM_FCE_CPU_DESC_IDX	0x09a8
+
+struct sk_buff *mt76u_mcu_msg_alloc(const void *data, int len)
+{
+	struct sk_buff *skb;
+
+	skb = alloc_skb(MT_CMD_HDR_LEN + len + 8, GFP_KERNEL);
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, MT_CMD_HDR_LEN);
+	skb_put_data(skb, data, len);
+
+	return skb;
+}
+EXPORT_SYMBOL_GPL(mt76u_mcu_msg_alloc);
+
+void mt76u_mcu_complete_urb(struct urb *urb)
+{
+	struct completion *cmpl = urb->context;
+
+	complete(cmpl);
+}
+EXPORT_SYMBOL_GPL(mt76u_mcu_complete_urb);
+
+static int mt76u_mcu_wait_resp(struct mt76_dev *dev, u8 seq)
+{
+	struct mt76_usb *usb = &dev->usb;
+	struct mt76u_buf *buf = &usb->mcu.res;
+	int i, ret;
+	u32 rxfce;
+
+	for (i = 0; i < 5; i++) {
+		if (!wait_for_completion_timeout(&usb->mcu.cmpl,
+						 msecs_to_jiffies(300)))
+			continue;
+
+		if (buf->urb->status)
+			return -EIO;
+
+		rxfce = get_unaligned_le32(sg_virt(&buf->urb->sg[0]));
+		ret = mt76u_submit_buf(dev, USB_DIR_IN,
+				       MT_EP_IN_CMD_RESP,
+				       buf, GFP_KERNEL,
+				       mt76u_mcu_complete_urb,
+				       &usb->mcu.cmpl);
+		if (ret)
+			return ret;
+
+		if (seq == FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce))
+			return 0;
+
+		dev_err(dev->dev, "error: MCU resp evt:%lx seq:%hhx-%lx\n",
+			FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce),
+			seq, FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce));
+	}
+
+	dev_err(dev->dev, "error: %s timed out\n", __func__);
+	return -ETIMEDOUT;
+}
+
+int mt76u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
+		       int cmd, bool wait_resp)
+{
+	struct usb_interface *intf = to_usb_interface(dev->dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct mt76_usb *usb = &dev->usb;
+	unsigned int pipe;
+	int ret, sent;
+	u8 seq = 0;
+	u32 info;
+
+	if (test_bit(MT76_REMOVED, &dev->state))
+		return 0;
+
+	mutex_lock(&usb->mcu.mutex);
+
+	pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
+	if (wait_resp) {
+		seq = ++usb->mcu.msg_seq & 0xf;
+		if (!seq)
+			seq = ++usb->mcu.msg_seq & 0xf;
+	}
+
+	info = FIELD_PREP(MT_MCU_MSG_CMD_SEQ, seq) |
+	       FIELD_PREP(MT_MCU_MSG_CMD_TYPE, cmd) |
+	       MT_MCU_MSG_TYPE_CMD;
+	ret = mt76u_skb_dma_info(skb, CPU_TX_PORT, info);
+	if (ret)
+		goto out;
+
+	ret = usb_bulk_msg(udev, pipe, skb->data, skb->len, &sent, 500);
+	if (ret)
+		goto out;
+
+	if (wait_resp)
+		ret = mt76u_mcu_wait_resp(dev, seq);
+
+out:
+	mutex_unlock(&usb->mcu.mutex);
+
+	consume_skb(skb);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mt76u_mcu_send_msg);
+
+void mt76u_mcu_fw_reset(struct mt76_dev *dev)
+{
+	mt76u_vendor_request(dev, MT_VEND_DEV_MODE,
+			     USB_DIR_OUT | USB_TYPE_VENDOR,
+			     0x1, 0, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(mt76u_mcu_fw_reset);
+
+static int
+__mt76u_mcu_fw_send_data(struct mt76_dev *dev, struct mt76u_buf *buf,
+			 const void *fw_data, int len, u32 dst_addr)
+{
+	u8 *data = sg_virt(&buf->urb->sg[0]);
+	DECLARE_COMPLETION_ONSTACK(cmpl);
+	__le32 info;
+	u32 val;
+	int err;
+
+	info = cpu_to_le32(FIELD_PREP(MT_MCU_MSG_PORT, CPU_TX_PORT) |
+			   FIELD_PREP(MT_MCU_MSG_LEN, len) |
+			   MT_MCU_MSG_TYPE_CMD);
+
+	memcpy(data, &info, sizeof(info));
+	memcpy(data + sizeof(info), fw_data, len);
+	memset(data + sizeof(info) + len, 0, 4);
+
+	mt76u_single_wr(dev, MT_VEND_WRITE_FCE,
+			MT_FCE_DMA_ADDR, dst_addr);
+	len = roundup(len, 4);
+	mt76u_single_wr(dev, MT_VEND_WRITE_FCE,
+			MT_FCE_DMA_LEN, len << 16);
+
+	buf->len = MT_CMD_HDR_LEN + len + sizeof(info);
+	err = mt76u_submit_buf(dev, USB_DIR_OUT,
+			       MT_EP_OUT_INBAND_CMD,
+			       buf, GFP_KERNEL,
+			       mt76u_mcu_complete_urb, &cmpl);
+	if (err < 0)
+		return err;
+
+	if (!wait_for_completion_timeout(&cmpl,
+					 msecs_to_jiffies(1000))) {
+		dev_err(dev->dev, "firmware upload timed out\n");
+		usb_kill_urb(buf->urb);
+		return -ETIMEDOUT;
+	}
+
+	if (mt76u_urb_error(buf->urb)) {
+		dev_err(dev->dev, "firmware upload failed: %d\n",
+			buf->urb->status);
+		return buf->urb->status;
+	}
+
+	val = mt76u_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX);
+	val++;
+	mt76u_wr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX, val);
+
+	return 0;
+}
+
+int mt76u_mcu_fw_send_data(struct mt76_dev *dev, const void *data,
+			   int data_len, u32 max_payload, u32 offset)
+{
+	int err, len, pos = 0, max_len = max_payload - 8;
+	struct mt76u_buf buf;
+
+	err = mt76u_buf_alloc(dev, &buf, 1, max_payload, max_payload,
+			      GFP_KERNEL);
+	if (err < 0)
+		return err;
+
+	while (data_len > 0) {
+		len = min_t(int, data_len, max_len);
+		err = __mt76u_mcu_fw_send_data(dev, &buf, data + pos,
+					       len, offset + pos);
+		if (err < 0)
+			break;
+
+		data_len -= len;
+		pos += len;
+		usleep_range(5000, 10000);
+	}
+	mt76u_buf_free(&buf);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(mt76u_mcu_fw_send_data);
+
+int mt76u_mcu_init_rx(struct mt76_dev *dev)
+{
+	struct mt76_usb *usb = &dev->usb;
+	int err;
+
+	err = mt76u_buf_alloc(dev, &usb->mcu.res, 1,
+			      MCU_RESP_URB_SIZE, MCU_RESP_URB_SIZE,
+			      GFP_KERNEL);
+	if (err < 0)
+		return err;
+
+	err = mt76u_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP,
+			       &usb->mcu.res, GFP_KERNEL,
+			       mt76u_mcu_complete_urb,
+			       &usb->mcu.cmpl);
+	if (err < 0)
+		mt76u_buf_free(&usb->mcu.res);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(mt76u_mcu_init_rx);

drivers/net/wireless/mediatek/mt76/usb_trace.c

+/*
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+
+#ifndef __CHECKER__
+#define CREATE_TRACE_POINTS
+#include "usb_trace.h"
+
+#endif

drivers/net/wireless/mediatek/mt76/usb_trace.h

+/*
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#if !defined(__MT76_USB_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __MT76_USB_TRACE_H
+
+#include <linux/tracepoint.h>
+#include "mt76.h"
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mt76_usb
+
+#define MAXNAME		32
+#define DEV_ENTRY   __array(char, wiphy_name, 32)
+#define DEV_ASSIGN  strlcpy(__entry->wiphy_name, wiphy_name(dev->hw->wiphy), MAXNAME)
+#define DEV_PR_FMT  "%s"
+#define DEV_PR_ARG  __entry->wiphy_name
+
+#define REG_ENTRY	__field(u32, reg) __field(u32, val)
+#define REG_ASSIGN	__entry->reg = reg; __entry->val = val
+#define REG_PR_FMT	" %04x=%08x"
+#define REG_PR_ARG	__entry->reg, __entry->val
+
+DECLARE_EVENT_CLASS(dev_reg_evt,
+	TP_PROTO(struct mt76_dev *dev, u32 reg, u32 val),
+	TP_ARGS(dev, reg, val),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		REG_ENTRY
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		REG_ASSIGN;
+	),
+	TP_printk(
+		DEV_PR_FMT REG_PR_FMT,
+		DEV_PR_ARG, REG_PR_ARG
+	)
+);
+
+DEFINE_EVENT(dev_reg_evt, usb_reg_rr,
+	TP_PROTO(struct mt76_dev *dev, u32 reg, u32 val),
+	TP_ARGS(dev, reg, val)
+);
+
+DEFINE_EVENT(dev_reg_evt, usb_reg_wr,
+	TP_PROTO(struct mt76_dev *dev, u32 reg, u32 val),
+	TP_ARGS(dev, reg, val)
+);
+
+#endif
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE usb_trace
+
+#include <trace/define_trace.h>