Commit b43883d6 authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

[media] omap3isp: Fix frame number propagation

When propagating the frame number through the pipeline, the frame number
must be incremented at frame start by the appropriate IRQ handler. This
was properly handled for the CSI2 and CCP2 receivers, but not when the
CCDC parallel interface is used.

ADD frame number incrementation to the HS/VS interrupt handler. As the
HS/VS interrupt is also generated for frames received by the CSI2 and
CCP2 receivers, remove explicit propagation handling from the serial
receivers.
Reported-by: default avatarKruno Mrak <kruno.mrak@matrix-vision.de>
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: default avatarSakari Ailus <sakari.ailus@iki.fi>
Tested-by: default avatarSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent a32f2f90
......@@ -785,14 +785,6 @@ static int isp_pipeline_enable(struct isp_pipeline *pipe,
}
}
/* Frame number propagation. In continuous streaming mode the number
* is incremented in the frame start ISR. In mem-to-mem mode
* singleshot is used and frame start IRQs are not available.
* Thus we have to increment the number here.
*/
if (pipe->do_propagation && mode == ISP_PIPELINE_STREAM_SINGLESHOT)
atomic_inc(&pipe->frame_number);
return 0;
}
......
......@@ -1410,6 +1410,9 @@ static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
struct video_device *vdev = ccdc->subdev.devnode;
struct v4l2_event event;
/* Frame number propagation */
atomic_inc(&pipe->frame_number);
memset(&event, 0, sizeof(event));
event.type = V4L2_EVENT_FRAME_SYNC;
event.u.frame_sync.frame_sequence = atomic_read(&pipe->frame_number);
......
......@@ -161,7 +161,6 @@ static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2)
static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
{
struct isp_device *isp = to_isp_device(ccp2);
struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
int i;
if (enable && ccp2->vdds_csib)
......@@ -178,19 +177,6 @@ static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN,
enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0);
/* For frame count propagation */
if (pipe->do_propagation) {
/* We may want the Frame Start IRQ from LC0 */
if (enable)
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2,
ISPCCP2_LC01_IRQENABLE,
ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
else
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCP2,
ISPCCP2_LC01_IRQENABLE,
ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
}
if (!enable && ccp2->vdds_csib)
regulator_disable(ccp2->vdds_csib);
}
......@@ -350,7 +336,6 @@ static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ |
ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
......@@ -613,14 +598,6 @@ void omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2)
if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping))
return;
/* Frame number propagation */
if (lcx_irqstatus & ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ) {
struct isp_pipeline *pipe =
to_isp_pipeline(&ccp2->subdev.entity);
if (pipe->do_propagation)
atomic_inc(&pipe->frame_number);
}
/* Handle queued buffers on frame end interrupts */
if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ)
ccp2_isr_buffer(ccp2);
......
......@@ -378,21 +378,17 @@ static void csi2_timing_config(struct isp_device *isp,
static void csi2_irq_ctx_set(struct isp_device *isp,
struct isp_csi2_device *csi2, int enable)
{
u32 reg = ISPCSI2_CTX_IRQSTATUS_FE_IRQ;
int i;
if (csi2->use_fs_irq)
reg |= ISPCSI2_CTX_IRQSTATUS_FS_IRQ;
for (i = 0; i < 8; i++) {
isp_reg_writel(isp, reg, csi2->regs1,
isp_reg_writel(isp, ISPCSI2_CTX_IRQSTATUS_FE_IRQ, csi2->regs1,
ISPCSI2_CTX_IRQSTATUS(i));
if (enable)
isp_reg_set(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i),
reg);
ISPCSI2_CTX_IRQSTATUS_FE_IRQ);
else
isp_reg_clr(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i),
reg);
ISPCSI2_CTX_IRQSTATUS_FE_IRQ);
}
}
......@@ -690,14 +686,6 @@ static void csi2_isr_ctx(struct isp_csi2_device *csi2,
status = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n));
isp_reg_writel(isp, status, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n));
/* Propagate frame number */
if (status & ISPCSI2_CTX_IRQSTATUS_FS_IRQ) {
struct isp_pipeline *pipe =
to_isp_pipeline(&csi2->subdev.entity);
if (pipe->do_propagation)
atomic_inc(&pipe->frame_number);
}
if (!(status & ISPCSI2_CTX_IRQSTATUS_FE_IRQ))
return;
......@@ -1047,14 +1035,12 @@ static int csi2_set_stream(struct v4l2_subdev *sd, int enable)
{
struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
struct isp_device *isp = csi2->isp;
struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity);
struct isp_video *video_out = &csi2->video_out;
switch (enable) {
case ISP_PIPELINE_STREAM_CONTINUOUS:
if (omap3isp_csiphy_acquire(csi2->phy) < 0)
return -ENODEV;
csi2->use_fs_irq = pipe->do_propagation;
if (csi2->output & CSI2_OUTPUT_MEMORY)
omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI2A_WRITE);
csi2_configure(csi2);
......
......@@ -145,7 +145,6 @@ struct isp_csi2_device {
u32 output; /* output to CCDC, memory or both? */
bool dpcm_decompress;
unsigned int frame_skip;
bool use_fs_irq;
struct isp_csiphy *phy;
struct isp_csi2_ctx_cfg contexts[ISP_CSI2_MAX_CTX_NUM + 1];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment