Merge tag 'cris-for-linus-3.7' of git://jni.nu/cris

Pull CRIS changes from Jesper Nilsson:
 "Removal of some unused code from the CRIS port"

* tag 'cris-for-linus-3.7' of git://jni.nu/cris:
  CRIS: Remove VCS simulator specific code
  cris/PCI: remove pcibios_assign_resources()

arch/cris/Kconfig

@@ -138,11 +138,6 @@ config CRIS_MACH_ARTPEC3
 
 endchoice
 
-config ETRAX_VCS_SIM
-	bool "VCS Simulator"
-	help
-	  Setup hardware to be run in the VCS simulator.
-
 config ETRAX_ARCH_V10
        bool
        default y if ETRAX100LX || ETRAX100LX_V2

arch/cris/arch-v32/drivers/axisflashmap.c

@@ -329,7 +329,6 @@ static int __init init_axis_flash(void)
 	}
 #endif
 
-#ifndef CONFIG_ETRAX_VCS_SIM
 	main_mtd = flash_probe();
 	if (main_mtd)
 		printk(KERN_INFO "%s: 0x%08x bytes of NOR flash memory.\n",
@@ -603,34 +602,7 @@ static int __init init_axis_flash(void)
 					"partition %d\n", part);
 		}
 	}
-#endif /* CONFIG_EXTRAX_VCS_SIM */
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-	/* For simulator, always use a RAM partition.
-	 * The rootfs will be found after the kernel in RAM,
-	 * with romfs_start and romfs_end indicating location and size.
-	 */
-	struct mtd_info *mtd_ram;
-
-	mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-	if (!mtd_ram) {
-		panic("axisflashmap: Couldn't allocate memory for "
-		      "mtd_info!\n");
-	}
-
-	printk(KERN_INFO "axisflashmap: Adding RAM partition for romfs, "
-	       "at %u, size %u\n",
-	       (unsigned) romfs_start, (unsigned) romfs_length);
-
-	err = mtdram_init_device(mtd_ram, (void *)romfs_start,
-				 romfs_length, "romfs");
-	if (err) {
-		panic("axisflashmap: Could not initialize MTD RAM "
-		      "device!\n");
-	}
-#endif /* CONFIG_EXTRAX_VCS_SIM */
-
-#ifndef CONFIG_ETRAX_VCS_SIM
 	if (aux_mtd) {
 		aux_partition.size = aux_mtd->size;
 		err = mtd_device_register(aux_mtd, &aux_partition, 1);
@@ -639,7 +611,6 @@ static int __init init_axis_flash(void)
 			      "aux mtd device!\n");
 
 	}
-#endif /* CONFIG_EXTRAX_VCS_SIM */
 
 	return err;
 }

arch/cris/arch-v32/drivers/pci/bios.c

@@ -97,28 +97,3 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 		pcibios_enable_irq(dev);
 	return 0;
 }
-
-int pcibios_assign_resources(void)
-{
-	struct pci_dev *dev = NULL;
-	int idx;
-	struct resource *r;
-
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		int class = dev->class >> 8;
-
-		/* Don't touch classless devices and host bridges */
-		if (!class || class == PCI_CLASS_BRIDGE_HOST)
-			continue;
-
-		for(idx=0; idx<6; idx++) {
-			r = &dev->resource[idx];
-
-			if (!r->start && r->end)
-				pci_assign_resource(dev, idx);
-		}
-	}
-	return 0;
-}
-
-EXPORT_SYMBOL(pcibios_assign_resources);

arch/cris/arch-v32/kernel/head.S

@@ -36,13 +36,6 @@
 	.global nand_boot
 	.global swapper_pg_dir
 
-	;; Dummy section to make it bootable with current VCS simulator
-#ifdef CONFIG_ETRAX_VCS_SIM
-	.section ".boot", "ax"
-	ba tstart
-	nop
-#endif
-
 	.text
 tstart:
 	;; This is the entry point of the kernel. The CPU is currently in
@@ -75,17 +68,10 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 5)     \
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
-#elif !defined(CONFIG_ETRAX_VCS_SIM)
-	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
-		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
-		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
 #else
-	;; Map the virtual DRAM to the RW eprom area at address 0.
-	;; Also map 0xa for the hook calls,
 	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
-		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb)   \
-		| REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
 #endif
 
 	;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00.
@@ -126,27 +112,6 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 		| REG_STATE(mmu, rw_mm_cfg, seg_2, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_1, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
-#elif !defined(CONFIG_ETRAX_VCS_SIM)
-	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
-		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
-		| REG_STATE(mmu, rw_mm_cfg, ex, on)		\
-		| REG_STATE(mmu, rw_mm_cfg, inv, on)		\
-		| REG_STATE(mmu, rw_mm_cfg, seg_f, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_e, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_d, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_c, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_b, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_a, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_9, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_8, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_7, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_6, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_5, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_4, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_3, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_2, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_1, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
 #else
 	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
 		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
@@ -157,7 +122,7 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 		| REG_STATE(mmu, rw_mm_cfg, seg_d, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_c, linear)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_b, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_a, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_a, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_9, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_8, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_7, page)	\
@@ -226,7 +191,6 @@ master_cpu:
 	move.d secondary_cpu_entry, $r1
 	move.d $r1, [$r0]
 #endif
-#ifndef CONFIG_ETRAX_VCS_SIM
 	; Check if starting from DRAM (network->RAM boot or unpacked
 	; compressed kernel), or directly from flash.
 	lapcq	., $r0
@@ -234,7 +198,6 @@ master_cpu:
 	cmp.d	0x10000, $r0	; Arbitrary, something above this code.
 	blo	_inflash0
 	nop
-#endif
 
 	jump	_inram		; Jump to cached RAM.
 	nop
@@ -326,7 +289,6 @@ move_cramfs:
 	move.d	romfs_length, $r1
 	move.d	$r0, [$r1]
 
-#ifndef CONFIG_ETRAX_VCS_SIM
 	;; The kernel could have been unpacked to DRAM by the loader, but
 	;; the cramfs image could still be in the flash immediately
 	;; following the compressed kernel image. The loader passes the address
@@ -335,10 +297,6 @@ move_cramfs:
 	cmp.d	0x0ffffff8, $r9
 	bhs	_no_romfs_in_flash ; R9 points outside the flash area.
 	nop
-#else
-	ba _no_romfs_in_flash
-	nop
-#endif
 	;; cramfs rootfs might to be in flash. Check for it.
 	move.d	[$r9], $r0	; cramfs_super.magic
 	cmp.d	CRAMFS_MAGIC, $r0
@@ -396,7 +354,6 @@ _no_romfs_in_flash:
 	move.d	romfs_length, $r3
 	move.d	$r2, [$r3]	; store size at romfs_length
 
-#ifndef CONFIG_ETRAX_VCS_SIM
 	add.d	$r2, $r0	; copy from end and downwards
 	add.d	$r2, $r1
 
@@ -410,7 +367,6 @@ _no_romfs_in_flash:
 	subq	1, $r2
 	bne	1b
 	nop
-#endif
 
 4:
 	;; BSS move done.
@@ -455,7 +411,6 @@ no_command_line:
 	move.d	etrax_irv, $r1	; Set the exception base register and pointer.
 	move.d	$r0, [$r1]
 
-#ifndef CONFIG_ETRAX_VCS_SIM
 	;; Clear the BSS region from _bss_start to _end.
 	move.d	__bss_start, $r0
 	move.d	_end, $r1
@@ -463,15 +418,6 @@ no_command_line:
 	cmp.d	$r1, $r0
 	blo 1b
 	nop
-#endif
-
-#ifdef CONFIG_ETRAX_VCS_SIM
-	/* Set the watchdog timeout to something big. Will be removed when */
-	/* watchdog can be disabled with command line option */
-	move.d  0x7fffffff, $r10
-	jsr     CPU_WATCHDOG_TIMEOUT
-	nop
-#endif
 
 	; Initialize registers to increase determinism
 	move.d __bss_start, $r0

arch/cris/arch-v32/kernel/kgdb.c

@@ -381,23 +381,9 @@ static int read_register(char regno, unsigned int *valptr);
 /* Serial port, reads one character. ETRAX 100 specific. from debugport.c */
 int getDebugChar(void);
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-int getDebugChar(void)
-{
-  return socketread();
-}
-#endif
-
 /* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
 void putDebugChar(int val);
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-void putDebugChar(int val)
-{
-  socketwrite((char *)&val, 1);
-}
-#endif
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 

arch/cris/arch-v32/mach-a3/Makefile

-# $Id: Makefile,v 1.3 2007/03/13 11:57:46 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_ETRAX_VCS_SIM) += vcs_hook.o
 obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:

arch/cris/arch-v32/mach-a3/vcs_hook.c

-/*
- * Simulator hook mechanism
- */
-
-#include "vcs_hook.h"
-#include <asm/io.h>
-#include <stdarg.h>
-
-#define HOOK_TRIG_ADDR      0xb7000000
-#define HOOK_MEM_BASE_ADDR  0xce000000
-
-static volatile unsigned *hook_base;
-
-#define HOOK_DATA(offset) hook_base[offset]
-#define VHOOK_DATA(offset) hook_base[offset]
-#define HOOK_TRIG(funcid) \
-	do { \
-		*((unsigned *) HOOK_TRIG_ADDR) = funcid; \
-	} while (0)
-#define HOOK_DATA_BYTE(offset) ((unsigned char *)hook_base)[offset]
-
-static void hook_init(void)
-{
-	static int first = 1;
-	if (first) {
-		first = 0;
-		hook_base = ioremap(HOOK_MEM_BASE_ADDR, 8192);
-	}
-}
-
-static unsigned hook_trig(unsigned id)
-{
-	unsigned ret;
-
-	/* preempt_disable(); */
-
-	/* Dummy read from mem to make sure data has propagated to memory
-	 * before trigging */
-	ret = *hook_base;
-
-	/* trigger hook */
-	HOOK_TRIG(id);
-
-	/* wait for call to finish */
-	while (VHOOK_DATA(0) > 0) ;
-
-	/* extract return value */
-
-	ret = VHOOK_DATA(1);
-
-	return ret;
-}
-
-int hook_call(unsigned id, unsigned pcnt, ...)
-{
-	va_list ap;
-	int i;
-	unsigned ret;
-
-	hook_init();
-
-	HOOK_DATA(0) = id;
-
-	va_start(ap, pcnt);
-	for (i = 1; i <= pcnt; i++)
-		HOOK_DATA(i) = va_arg(ap, unsigned);
-	va_end(ap);
-
-	ret = hook_trig(id);
-
-	return ret;
-}
-
-int hook_call_str(unsigned id, unsigned size, const char *str)
-{
-	int i;
-	unsigned ret;
-
-	hook_init();
-
-	HOOK_DATA(0) = id;
-	HOOK_DATA(1) = size;
-
-	for (i = 0; i < size; i++)
-		HOOK_DATA_BYTE(8 + i) = str[i];
-	HOOK_DATA_BYTE(8 + i) = 0;
-
-	ret = hook_trig(id);
-
-	return ret;
-}
-
-void print_str(const char *str)
-{
-	int i;
-	/* find null at end of string */
-	for (i = 1; str[i]; i++) ;
-	hook_call(hook_print_str, i, str);
-}
-
-void CPU_WATCHDOG_TIMEOUT(unsigned t)
-{
-}

arch/cris/arch-v32/mach-a3/vcs_hook.h

-/*
- * Simulator hook call mechanism
- */
-
-#ifndef __hook_h__
-#define __hook_h__
-
-int hook_call(unsigned id, unsigned pcnt, ...);
-int hook_call_str(unsigned id, unsigned size, const char *str);
-
-enum hook_ids {
-  hook_debug_on = 1,
-  hook_debug_off,
-  hook_stop_sim_ok,
-  hook_stop_sim_fail,
-  hook_alloc_shared,
-  hook_ptr_shared,
-  hook_free_shared,
-  hook_file2shared,
-  hook_cmp_shared,
-  hook_print_params,
-  hook_sim_time,
-  hook_stop_sim,
-  hook_kick_dog,
-  hook_dog_timeout,
-  hook_rand,
-  hook_srand,
-  hook_rand_range,
-  hook_print_str,
-  hook_print_hex,
-  hook_cmp_offset_shared,
-  hook_fill_random_shared,
-  hook_alloc_random_data,
-  hook_calloc_random_data,
-  hook_print_int,
-  hook_print_uint,
-  hook_fputc,
-  hook_init_fd,
-  hook_sbrk,
-  hook_print_context_descr,
-  hook_print_data_descr,
-  hook_print_group_descr,
-  hook_fill_shared,
-  hook_sl_srand,
-  hook_sl_rand_irange,
-  hook_sl_rand_urange,
-  hook_sl_sh_malloc_aligned,
-  hook_sl_sh_calloc_aligned,
-  hook_sl_sh_alloc_random_data,
-  hook_sl_sh_file2mem,
-  hook_sl_vera_mbox_handle,
-  hook_sl_vera_mbox_put,
-  hook_sl_vera_mbox_get,
-  hook_sl_system,
-  hook_sl_sh_hexdump
-};
-
-#endif

arch/cris/arch-v32/mach-fs/Makefile

-# $Id: Makefile,v 1.3 2007/03/13 11:57:46 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_ETRAX_VCS_SIM) += vcs_hook.o
 obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:

arch/cris/arch-v32/mach-fs/vcs_hook.c

-/*
- * Call simulator hook. This is the part running in the
- * simulated program.
- */
-
-#include "vcs_hook.h"
-#include <stdarg.h>
-#include <arch-v32/hwregs/reg_map.h>
-#include <arch-v32/hwregs/intr_vect_defs.h>
-
-#define HOOK_TRIG_ADDR     0xb7000000	/* hook cvlog model reg address */
-#define HOOK_MEM_BASE_ADDR 0xa0000000	/* csp4 (shared mem) base addr */
-
-#define HOOK_DATA(offset) ((unsigned *)HOOK_MEM_BASE_ADDR)[offset]
-#define VHOOK_DATA(offset) ((volatile unsigned *)HOOK_MEM_BASE_ADDR)[offset]
-#define HOOK_TRIG(funcid) \
-	do { \
-		*((unsigned *) HOOK_TRIG_ADDR) = funcid; \
-	} while (0)
-#define HOOK_DATA_BYTE(offset) ((unsigned char *)HOOK_MEM_BASE_ADDR)[offset]
-
-int hook_call(unsigned id, unsigned pcnt, ...)
-{
-	va_list ap;
-	unsigned i;
-	unsigned ret;
-#ifdef USING_SOS
-	PREEMPT_OFF_SAVE();
-#endif
-
-	/* pass parameters */
-	HOOK_DATA(0) = id;
-
-	/* Have to make hook_print_str a special case since we call with a
-	 * parameter of byte type. Should perhaps be a separate
-	 * hook_call. */
-
-	if (id == hook_print_str) {
-		int i;
-		char *str;
-
-		HOOK_DATA(1) = pcnt;
-
-		va_start(ap, pcnt);
-		str = (char *)va_arg(ap, unsigned);
-
-		for (i = 0; i != pcnt; i++)
-			HOOK_DATA_BYTE(8 + i) = str[i];
-
-		HOOK_DATA_BYTE(8 + i) = 0;	/* null byte */
-	} else {
-		va_start(ap, pcnt);
-		for (i = 1; i <= pcnt; i++)
-			HOOK_DATA(i) = va_arg(ap, unsigned);
-		va_end(ap);
-	}
-
-	/* read from mem to make sure data has propagated to memory before
-	 * trigging */
-	ret = *((volatile unsigned *)HOOK_MEM_BASE_ADDR);
-
-	/* trigger hook */
-	HOOK_TRIG(id);
-
-	/* wait for call to finish */
-	while (VHOOK_DATA(0) > 0) ;
-
-	/* extract return value */
-
-	ret = VHOOK_DATA(1);
-
-#ifdef USING_SOS
-	PREEMPT_RESTORE();
-#endif
-	return ret;
-}
-
-unsigned hook_buf(unsigned i)
-{
-	return (HOOK_DATA(i));
-}
-
-void print_str(const char *str)
-{
-	int i;
-	/* find null at end of string */
-	for (i = 1; str[i]; i++) ;
-	hook_call(hook_print_str, i, str);
-}
-
-void CPU_KICK_DOG(void)
-{
-	(void)hook_call(hook_kick_dog, 0);
-}
-
-void CPU_WATCHDOG_TIMEOUT(unsigned t)
-{
-	(void)hook_call(hook_dog_timeout, 1, t);
-}
-

arch/cris/arch-v32/mach-fs/vcs_hook.h

-/*
- * Call simulator hook functions
- */
-
-#ifndef HOOK_H
-#define HOOK_H
-
-int hook_call(unsigned id, unsigned pcnt, ...);
-
-enum hook_ids {
-  hook_debug_on = 1,
-  hook_debug_off,
-  hook_stop_sim_ok,
-  hook_stop_sim_fail,
-  hook_alloc_shared,
-  hook_ptr_shared,
-  hook_free_shared,
-  hook_file2shared,
-  hook_cmp_shared,
-  hook_print_params,
-  hook_sim_time,
-  hook_stop_sim,
-  hook_kick_dog,
-  hook_dog_timeout,
-  hook_rand,
-  hook_srand,
-  hook_rand_range,
-  hook_print_str,
-  hook_print_hex,
-  hook_cmp_offset_shared,
-  hook_fill_random_shared,
-  hook_alloc_random_data,
-  hook_calloc_random_data,
-  hook_print_int,
-  hook_print_uint,
-  hook_fputc,
-  hook_init_fd,
-  hook_sbrk
-
-};
-
-#endif

arch/cris/arch-v32/mm/init.c

@@ -73,11 +73,7 @@ void __init cris_mmu_init(void)
 #endif
 		       REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
 		       REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
-#ifndef CONFIG_ETRAX_VCS_SIM
                        REG_STATE(mmu, rw_mm_cfg, seg_a, page)   |
-#else
-		       REG_STATE(mmu, rw_mm_cfg, seg_a, linear) |
-#endif
 		       REG_STATE(mmu, rw_mm_cfg, seg_9, page)   |
 		       REG_STATE(mmu, rw_mm_cfg, seg_8, page)   |
 		       REG_STATE(mmu, rw_mm_cfg, seg_7, page)   |
@@ -100,11 +96,7 @@ void __init cris_mmu_init(void)
 #endif
                          REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) |
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) |
-#ifndef CONFIG_ETRAX_VCS_SIM
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0x0) |
-#else
-                         REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa) |
-#endif
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_9, 0x0) |
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_8, 0x0));
 

arch/cris/include/arch-v32/arch/page.h

@@ -11,13 +11,8 @@
  * selected bit it's possible to convert between KSEG_x and 0x40000000 where the
  * DRAM really resides. DRAM is virtually at 0xc.
  */
-#ifndef CONFIG_ETRAX_VCS_SIM
 #define __pa(x) ((unsigned long)(x) & 0x7fffffff)
 #define __va(x) ((void *)((unsigned long)(x) | 0x80000000))
-#else
-#define __pa(x) ((unsigned long)(x) & 0x3fffffff)
-#define __va(x) ((void *)((unsigned long)(x) | 0xc0000000))
-#endif
 
 #define VM_STACK_DEFAULT_FLAGS	(VM_READ | VM_WRITE | \
 				 VM_MAYREAD | VM_MAYWRITE)

arch/cris/include/arch-v32/arch/processor.h

@@ -21,13 +21,9 @@ struct thread_struct {
 
 /*
  * User-space process size. This is hardcoded into a few places, so don't
- * changed it unless everything's clear!
+ * change it unless everything's clear!
  */
-#ifndef CONFIG_ETRAX_VCS_SIM
 #define TASK_SIZE	(0xB0000000UL)
-#else
-#define TASK_SIZE	(0xA0000000UL)
-#endif
 
 /* CCS I=1, enable interrupts. */
 #define INIT_THREAD { 0, 0, (1 << I_CCS_BITNR) }

arch/cris/include/arch-v32/mach-fs/mach/startup.inc

@@ -71,12 +71,6 @@
 	move.d   REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0
 	move.d   CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1
 	move.d   $r1, [$r0]
-#ifdef CONFIG_ETRAX_VCS_SIM
-	;; Set up minimal flash waitstates
-	move.d 0, $r10
-	move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11
-	move.d $r10, [$r11]
-#endif
 	.endm
 
 #endif

arch/cris/include/asm/pci.h

@@ -19,7 +19,6 @@ extern unsigned long pci_mem_start;
 
 void pcibios_config_init(void);
 struct pci_bus * pcibios_scan_root(int bus);
-int pcibios_assign_resources(void);
 
 void pcibios_set_master(struct pci_dev *dev);
 void pcibios_penalize_isa_irq(int irq);