Commit b526bf23 authored by Ben Dooks's avatar Ben Dooks Committed by Russell King

[ARM] 3161/1: BAST - fix commas on end of structs

Patch from Ben Dooks

Make the use of , on the lsat entry structs consistenent
through arch/arm/mach-s3c2410/mach-bast.c
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent a7d06833
......@@ -203,7 +203,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
.name = "pclk",
.divisor = 1,
.min_baud = 0,
.max_baud = 0.
.max_baud = 0,
}
};
......@@ -216,7 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
.clocks_size = ARRAY_SIZE(bast_serial_clocks)
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
[1] = {
.hwport = 1,
......@@ -225,7 +225,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
.clocks_size = ARRAY_SIZE(bast_serial_clocks)
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
/* port 2 is not actually used */
[2] = {
......@@ -235,7 +235,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
.clocks_size = ARRAY_SIZE(bast_serial_clocks)
.clocks_size = ARRAY_SIZE(bast_serial_clocks),
}
};
......@@ -268,7 +268,7 @@ static struct mtd_partition bast_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
.offset = 0
.offset = 0,
},
[1] = {
.name = "/boot",
......@@ -296,28 +296,28 @@ static struct s3c2410_nand_set bast_nand_sets[] = {
.nr_chips = 1,
.nr_map = smartmedia_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part
.partitions = bast_default_nand_part,
},
[1] = {
.name = "chip0",
.nr_chips = 1,
.nr_map = chip0_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part
.partitions = bast_default_nand_part,
},
[2] = {
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part
.partitions = bast_default_nand_part,
},
[3] = {
.name = "chip2",
.nr_chips = 1,
.nr_map = chip2_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part
.partitions = bast_default_nand_part,
}
};
......@@ -355,17 +355,17 @@ static struct resource bast_dm9k_resource[] = {
[0] = {
.start = S3C2410_CS5 + BAST_PA_DM9000,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 3,
.flags = IORESOURCE_MEM
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
.flags = IORESOURCE_MEM
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
.flags = IORESOURCE_IRQ
.flags = IORESOURCE_IRQ,
}
};
......@@ -375,7 +375,7 @@ static struct resource bast_dm9k_resource[] = {
*/
static struct dm9000_plat_data bast_dm9k_platdata = {
.flags = DM9000_PLATF_16BITONLY
.flags = DM9000_PLATF_16BITONLY,
};
static struct platform_device bast_device_dm9k = {
......@@ -492,7 +492,7 @@ static struct s3c24xx_board bast_board __initdata = {
.devices = bast_devices,
.devices_count = ARRAY_SIZE(bast_devices),
.clocks = bast_clocks,
.clocks_count = ARRAY_SIZE(bast_clocks)
.clocks_count = ARRAY_SIZE(bast_clocks),
};
static void __init bast_map_io(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment