Commit b5849b1a authored by Alan Cox's avatar Alan Cox Committed by Greg Kroah-Hartman

sdio_uart: use tty_port

Add a tty_port object to the sdio uart. For the moment just begin using the
tty field of the port, as this is the critical one to clean up.
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent e707c35c
......@@ -73,6 +73,7 @@ struct uart_icount {
};
struct sdio_uart_port {
struct tty_port port;
struct kref kref;
struct tty_struct *tty;
unsigned int index;
......@@ -172,7 +173,7 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port)
port->func = NULL;
mutex_unlock(&port->func_lock);
if (port->opened)
tty_hangup(port->tty);
tty_hangup(port->port.tty);
mutex_unlock(&port->open_lock);
sdio_release_irq(func);
sdio_disable_func(func);
......@@ -391,7 +392,7 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port)
static void sdio_uart_receive_chars(struct sdio_uart_port *port,
unsigned int *status)
{
struct tty_struct *tty = port->tty;
struct tty_struct *tty = port->port.tty;
unsigned int ch, flag;
int max_count = 256;
......@@ -446,6 +447,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
{
struct circ_buf *xmit = &port->xmit;
int count;
struct tty_struct *tty = port->port.tty;
if (port->x_char) {
sdio_out(port, UART_TX, port->x_char);
......@@ -453,7 +455,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
port->x_char = 0;
return;
}
if (circ_empty(xmit) || port->tty->stopped || port->tty->hw_stopped) {
if (circ_empty(xmit) || tty->stopped || tty->hw_stopped) {
sdio_uart_stop_tx(port);
return;
}
......@@ -468,7 +470,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
} while (--count > 0);
if (circ_chars_pending(xmit) < WAKEUP_CHARS)
tty_wakeup(port->tty);
tty_wakeup(tty);
if (circ_empty(xmit))
sdio_uart_stop_tx(port);
......@@ -477,6 +479,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
{
int status;
struct tty_struct *tty = port->port.tty;
status = sdio_in(port, UART_MSR);
......@@ -491,17 +494,17 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
port->icount.dcd++;
if (status & UART_MSR_DCTS) {
port->icount.cts++;
if (port->tty->termios->c_cflag & CRTSCTS) {
if (tty->termios->c_cflag & CRTSCTS) {
int cts = (status & UART_MSR_CTS);
if (port->tty->hw_stopped) {
if (tty->hw_stopped) {
if (cts) {
port->tty->hw_stopped = 0;
tty->hw_stopped = 0;
sdio_uart_start_tx(port);
tty_wakeup(port->tty);
tty_wakeup(tty);
}
} else {
if (!cts) {
port->tty->hw_stopped = 1;
tty->hw_stopped = 1;
sdio_uart_stop_tx(port);
}
}
......@@ -546,12 +549,13 @@ static int sdio_uart_startup(struct sdio_uart_port *port)
{
unsigned long page;
int ret;
struct tty_struct *tty = port->port.tty;
/*
* Set the TTY IO error marker - we will only clear this
* once we have successfully opened the port.
*/
set_bit(TTY_IO_ERROR, &port->tty->flags);
set_bit(TTY_IO_ERROR, &tty->flags);
/* Initialise and allocate the transmit buffer. */
page = __get_free_page(GFP_KERNEL);
......@@ -595,14 +599,14 @@ static int sdio_uart_startup(struct sdio_uart_port *port)
port->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
port->mctrl = TIOCM_OUT2;
sdio_uart_change_speed(port, port->tty->termios, NULL);
sdio_uart_change_speed(port, tty->termios, NULL);
if (port->tty->termios->c_cflag & CBAUD)
if (tty->termios->c_cflag & CBAUD)
sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
if (port->tty->termios->c_cflag & CRTSCTS)
if (tty->termios->c_cflag & CRTSCTS)
if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
port->tty->hw_stopped = 1;
tty->hw_stopped = 1;
clear_bit(TTY_IO_ERROR, &port->tty->flags);
......@@ -634,7 +638,7 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port)
/* TODO: wait here for TX FIFO to drain */
/* Turn off DTR and RTS early. */
if (port->tty->termios->c_cflag & HUPCL)
if (port->port.tty->termios->c_cflag & HUPCL)
sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
/* Disable interrupts from this port */
......@@ -684,11 +688,11 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
if (!port->opened) {
tty->driver_data = port;
port->tty = tty;
port->port.tty = tty;
ret = sdio_uart_startup(port);
if (ret) {
tty->driver_data = NULL;
port->tty = NULL;
port->port.tty = NULL;
mutex_unlock(&port->open_lock);
sdio_uart_port_put(port);
return ret;
......@@ -723,7 +727,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp)
tty->closing = 1;
sdio_uart_shutdown(port);
tty_ldisc_flush(tty);
port->tty = NULL;
port->port.tty = NULL;
tty->driver_data = NULL;
tty->closing = 0;
}
......@@ -1068,6 +1072,7 @@ static int sdio_uart_probe(struct sdio_func *func,
port->func = func;
sdio_set_drvdata(func, port);
tty_port_init(&port->port);
ret = sdio_uart_add_port(port);
if (ret) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment