Commit b58db2c6 authored by Adam Jackson's avatar Adam Jackson Committed by Dave Airlie

drm/edid: Fix interlaced detailed timings to be frame size, not field.

cf. https://bugzilla.redhat.com/show_bug.cgi?id=533561Signed-off-by: default avatarAdam Jackson <ajax@redhat.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
parent f2d12b8e
......@@ -598,6 +598,50 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
return mode;
}
/*
* EDID is delightfully ambiguous about how interlaced modes are to be
* encoded. Our internal representation is of frame height, but some
* HDTV detailed timings are encoded as field height.
*
* The format list here is from CEA, in frame size. Technically we
* should be checking refresh rate too. Whatever.
*/
static void
drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
struct detailed_pixel_timing *pt)
{
int i;
static const struct {
int w, h;
} cea_interlaced[] = {
{ 1920, 1080 },
{ 720, 480 },
{ 1440, 480 },
{ 2880, 480 },
{ 720, 576 },
{ 1440, 576 },
{ 2880, 576 },
};
static const int n_sizes =
sizeof(cea_interlaced)/sizeof(cea_interlaced[0]);
if (!(pt->misc & DRM_EDID_PT_INTERLACED))
return;
for (i = 0; i < n_sizes; i++) {
if ((mode->hdisplay == cea_interlaced[i].w) &&
(mode->vdisplay == cea_interlaced[i].h / 2)) {
mode->vdisplay *= 2;
mode->vsync_start *= 2;
mode->vsync_end *= 2;
mode->vtotal *= 2;
mode->vtotal |= 1;
}
}
mode->flags |= DRM_MODE_FLAG_INTERLACE;
}
/**
* drm_mode_detailed - create a new mode from an EDID detailed timing section
* @dev: DRM device (needed to create new mode)
......@@ -680,8 +724,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
drm_mode_set_name(mode);
if (pt->misc & DRM_EDID_PT_INTERLACED)
mode->flags |= DRM_MODE_FLAG_INTERLACE;
drm_mode_do_interlace_quirk(mode, pt);
if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment