Commit b5c26d66 authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Maxime Ripard

ARM: dts: sun6i: hummingbird: Enable the onboard WiFi module

The Hummingbird A31 has an AMPAK AP6210 WiFi+Bluetooth module. The
WiFi part is a BCM43362 IC connected to MMC1 in the A31 SoC via SDIO.
The IC also takes a power enable signal via GPIO. This is supported
with the new power sequencing bindings.

The WiFi module supports out-of-band interrupt signaling via GPIO,
but this is not enabled yet.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 878c4ded
...@@ -61,6 +61,11 @@ / { ...@@ -61,6 +61,11 @@ / {
chosen { chosen {
bootargs = "earlyprintk console=ttyS0,115200"; bootargs = "earlyprintk console=ttyS0,115200";
}; };
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
}; };
&ehci0 { &ehci0 {
...@@ -127,6 +132,16 @@ &mmc0_pins_a { ...@@ -127,6 +132,16 @@ &mmc0_pins_a {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
}; };
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
vmmc-supply = <&vcc_wifi>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&ohci0 { &ohci0 {
status = "okay"; status = "okay";
}; };
...@@ -138,6 +153,13 @@ mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { ...@@ -138,6 +153,13 @@ mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
}; };
wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
allwinner,pins = "PG10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
}; };
&p2wi { &p2wi {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment