Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS upates from Thomas Bogendoerfer:

 - improvements for Loongson64

 - extended ingenic support

 - removal of not maintained paravirt system type

 - cleanups and fixes

* tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits)
  MIPS: SGI-IP27: always enable NUMA in Kconfig
  MAINTAINERS: Update KVM/MIPS maintainers
  MIPS: Update default config file for Loongson-3
  MIPS: KVM: Add kvm guest support for Loongson-3
  dt-bindings: mips: Document Loongson kvm guest board
  MIPS: handle Loongson-specific GSExc exception
  MIPS: add definitions for Loongson-specific CP0.Diag1 register
  MIPS: only register FTLBPar exception handler for supported models
  MIPS: ingenic: Hardcode mem size for qi,lb60 board
  MIPS: DTS: ingenic/qi,lb60: Add model and memory node
  MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB
  MIPS: head.S: Init fw_passed_dtb to builtin DTB
  of: address: Fix parser address/size cells initialization
  of_address: Guard of_bus_pci_get_flags with CONFIG_PCI
  MIPS: DTS: Fix number of msi vectors for Loongson64G
  MIPS: Loongson64: Add ISA node for LS7A PCH
  MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH
  MIPS: Loongson64: Enlarge IO_SPACE_LIMIT
  MIPS: Loongson64: Process ISA Node in DeviceTree
  of_address: Add bus type match for pci ranges parser
  ...

Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/mti,mips-cdmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Common Device Memory Map
+
+description: |
+  Defines a location of the MIPS Common Device Memory Map registers.
+
+maintainers:
+  - James Hogan <jhogan@kernel.org>
+
+properties:
+  compatible:
+    const: mti,mips-cdmm
+
+  reg:
+    description: |
+      Base address and size of an unoccupied memory region, which will be
+      used to map the MIPS CDMM registers block.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    cdmm@1bde8000 {
+      compatible = "mti,mips-cdmm";
+      reg = <0x1bde8000 0x8000>;
+    };
+...

Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt

-MIPS Global Interrupt Controller (GIC)
-
-The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
-It also supports local (per-processor) interrupts and software-generated
-interrupts which can be used as IPIs.  The GIC also includes a free-running
-global timer, per-CPU count/compare timers, and a watchdog.
-
-Required properties:
-- compatible : Should be "mti,gic".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt specifier.  Should be 3.
-  - The first cell is the type of interrupt, local or shared.
-    See <include/dt-bindings/interrupt-controller/mips-gic.h>.
-  - The second cell is the GIC interrupt number.
-  - The third cell encodes the interrupt flags.
-    See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
-    flags.
-
-Optional properties:
-- reg : Base address and length of the GIC registers.  If not present,
-  the base address reported by the hardware GCR_GIC_BASE will be used.
-- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
-  to which the GIC may not route interrupts.  Valid values are 2 - 7.
-  This property is ignored if the CPU is started in EIC mode.
-- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are
-  reserved for IPIs.
-  It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size
-  of the reserved range.
-  If not specified, the driver will allocate the last 2 * number of VPEs in the
-  system.
-
-Required properties for timer sub-node:
-- compatible : Should be "mti,gic-timer".
-- interrupts : Interrupt for the GIC local timer.
-
-Optional properties for timer sub-node:
-- clocks : GIC timer operating clock.
-- clock-frequency : Clock frequency at which the GIC timers operate.
-
-Note that one of clocks or clock-frequency must be specified.
-
-Example:
-
-	gic: interrupt-controller@1bdc0000 {
-		compatible = "mti,gic";
-		reg = <0x1bdc0000 0x20000>;
-
-		interrupt-controller;
-		#interrupt-cells = <3>;
-
-		mti,reserved-cpu-vectors = <7>;
-		mti,reserved-ipi-vectors = <40 8>;
-
-		timer {
-			compatible = "mti,gic-timer";
-			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-	uart@18101400 {
-		...
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
-		...
-	};

Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Global Interrupt Controller
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+description: |
+  The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+  It also supports local (per-processor) interrupts and software-generated
+  interrupts which can be used as IPIs. The GIC also includes a free-running
+  global timer, per-CPU count/compare timers, and a watchdog.
+
+properties:
+  compatible:
+    const: mti,gic
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the type of interrupt: local or shared defined in the
+      file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the
+      GIC interrupt number. The 3d cell encodes the interrupt flags setting up
+      the IRQ trigger modes, which are defined in the file
+      'dt-bindings/interrupt-controller/irq.h'.
+
+  reg:
+    description: |
+      Base address and length of the GIC registers space. If not present,
+      the base address reported by the hardware GCR_GIC_BASE will be used.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  mti,reserved-cpu-vectors:
+    description: |
+      Specifies the list of CPU interrupt vectors to which the GIC may not
+      route interrupts. This property is ignored if the CPU is started in EIC
+      mode.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint32-array
+      - minItems: 1
+        maxItems: 6
+        uniqueItems: true
+        items:
+          minimum: 2
+          maximum: 7
+
+  mti,reserved-ipi-vectors:
+    description: |
+      Specifies the range of GIC interrupts that are reserved for IPIs.
+      It accepts two values: the 1st is the starting interrupt and the 2nd is
+      the size of the reserved range. If not specified, the driver will
+      allocate the last (2 * number of VPEs in the system).
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint32-array
+      - items:
+          - minimum: 0
+            maximum: 254
+          - minimum: 2
+            maximum: 254
+
+  timer:
+    type: object
+    description: |
+      MIPS GIC includes a free-running global timer, per-CPU count/compare
+      timers, and a watchdog. Currently only the GIC Timer is supported.
+    properties:
+      compatible:
+        const: mti,gic-timer
+
+      interrupts:
+        description: |
+          Interrupt for the GIC local timer, so normally it's suppose to be of
+          <GIC_LOCAL X IRQ_TYPE_NONE> format.
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-frequency: true
+
+    required:
+      - compatible
+      - interrupts
+
+    oneOf:
+      - required:
+          - clocks
+      - required:
+          - clock-frequency
+
+    additionalProperties: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      mti,reserved-cpu-vectors = <7>;
+      mti,reserved-ipi-vectors = <40 8>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clock-frequency = <50000000>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clocks = <&cpu_pll>;
+      };
+    };
+  - |
+    interrupt-controller {
+      compatible = "mti,gic";
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+...

Documentation/devicetree/bindings/mips/ingenic/devices.yaml

@@ -8,7 +8,8 @@ title: Ingenic XBurst based Platforms Device Tree Bindings
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
-description: |
+
+description:
   Devices with a Ingenic XBurst CPU shall have the following properties.
 
 properties:
@@ -22,6 +23,11 @@ properties:
           - const: qi,lb60
           - const: ingenic,jz4740
 
+      - description: YLM RetroMini RS-90
+        items:
+          - const: ylm,rs90
+          - const: ingenic,jz4725b
+
       - description: Game Consoles Worldwide GCW Zero
         items:
           - const: gcw,zero
@@ -32,8 +38,13 @@ properties:
           - const: img,ci20
           - const: ingenic,jz4780
 
-      - description: YSH & ATIL General Board CU Neo
+      - description: YSH & ATIL General Board, CU1000 Module with Neo Backplane
         items:
           - const: yna,cu1000-neo
-          - const: ingenic,x1000
+          - const: ingenic,x1000e
+
+      - description: YSH & ATIL General Board, CU1830 Module with Neo Backplane
+        items:
+          - const: yna,cu1830-neo
+          - const: ingenic,x1830
 ...

Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ingenic/ingenic,cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Ingenic XBurst family CPUs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  Ingenic XBurst family CPUs shall have the following properties.
+
+properties:
+  compatible:
+    oneOf:
+
+      - description: Ingenic XBurst®1 CPU Cores
+        enum:
+          - ingenic,xburst-mxu1.0
+          - ingenic,xburst-fpu1.0-mxu1.1
+          - ingenic,xburst-fpu2.0-mxu2.0
+
+      - description: Ingenic XBurst®2 CPU Cores
+        enum:
+          - ingenic,xburst2-fpu2.1-mxu2.1-smt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - device_type
+  - compatible
+  - reg
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4780-cgu.h>
+
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu0: cpu@0 {
+                device_type = "cpu";
+                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+                reg = <0>;
+
+                clocks = <&cgu JZ4780_CLK_CPU>;
+                clock-names = "cpu";
+        };
+
+        cpu1: cpu@1 {
+                device_type = "cpu";
+                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+                reg = <1>;
+
+                clocks = <&cgu JZ4780_CLK_CORE1>;
+                clock-names = "cpu";
+        };
+    };
+...

Documentation/devicetree/bindings/mips/loongson/devices.yaml

@@ -17,11 +17,23 @@ properties:
   compatible:
     oneOf:
 
-      - description: Generic Loongson3 Quad Core + RS780E
+      - description: Classic Loongson64 Quad Core + LS7A
         items:
-          - const: loongson,loongson3-4core-rs780e
+          - const: loongson,loongson64c-4core-ls7a
 
-      - description: Generic Loongson3 Octa Core + RS780E
+      - description: Classic Loongson64 Quad Core + RS780E
         items:
-          - const: loongson,loongson3-8core-rs780e
+          - const: loongson,loongson64c-4core-rs780e
+
+      - description: Classic Loongson64 Octa Core + RS780E
+        items:
+          - const: loongson,loongson64c-8core-rs780e
+
+      - description: Generic Loongson64 Quad Core + LS7A
+        items:
+          - const: loongson,loongson64g-4core-ls7a
+
+      - description: Virtual Loongson64 Quad Core + VirtIO
+        items:
+          - const: loongson,loongson64v-4core-virtio
 ...

Documentation/devicetree/bindings/power/mti,mips-cpc.txt

-Binding for MIPS Cluster Power Controller (CPC).
-
-This binding allows a system to specify where the CPC registers are
-located.
-
-Required properties:
-compatible : Should be "mti,mips-cpc".
-regs: Should describe the address & size of the CPC register region.

Documentation/devicetree/bindings/power/mti,mips-cpc.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mti,mips-cpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Cluster Power Controller
+
+description: |
+  Defines a location of the MIPS Cluster Power Controller registers.
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+
+properties:
+  compatible:
+    const: mti,mips-cpc
+
+  reg:
+    description: |
+      Base address and size of an unoccupied memory region, which will be
+      used to map the MIPS CPC registers block.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    cpc@1bde0000 {
+      compatible = "mti,mips-cpc";
+      reg = <0x1bde0000 0x8000>;
+    };
+...

Documentation/devicetree/bindings/timer/ingenic,tcu.yaml

@@ -116,7 +116,9 @@ patternProperties:
             - ingenic,jz4740-watchdog
             - ingenic,jz4780-watchdog
           - items:
-            - const: ingenic,jz4770-watchdog
+            - enum:
+              - ingenic,jz4770-watchdog
+              - ingenic,jz4725b-watchdog
             - const: ingenic,jz4740-watchdog
 
       reg:
@@ -142,6 +144,7 @@ patternProperties:
         oneOf:
           - enum:
             - ingenic,jz4740-pwm
+            - ingenic,jz4725b-pwm
           - items:
             - enum:
               - ingenic,jz4770-pwm

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -1179,6 +1179,8 @@ patternProperties:
     description: Shenzhen Xunlong Software CO.,Limited
   "^xylon,.*":
     description: Xylon
+  "^ylm,.*":
+    description: Shenzhen Yangliming Electronic Technology Co., Ltd.
   "^yna,.*":
     description: YSH & ATIL
   "^yones-toptech,.*":

MAINTAINERS

@@ -9509,9 +9509,11 @@ F:	arch/arm64/kvm/
 F:	include/kvm/arm_*
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
+M:	Huacai Chen <chenhc@lemote.com>
+M:	Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
 L:	linux-mips@vger.kernel.org
 L:	kvm@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	arch/mips/include/asm/kvm*
 F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/kvm/
@@ -11516,6 +11518,17 @@ F:	arch/mips/configs/generic/board-boston.config
 F:	drivers/clk/imgtec/clk-boston.c
 F:	include/dt-bindings/clock/boston-clock.h
 
+MIPS CORE DRIVERS
+M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+M:	Serge Semin <fancer.lancer@gmail.com>
+L:	linux-mips@vger.kernel.org
+S:	Supported
+F:	drivers/bus/mips_cdmm.c
+F:	drivers/clocksource/mips-gic-timer.c
+F:	drivers/cpuidle/cpuidle-cps.c
+F:	drivers/irqchip/irq-mips-cpu.c
+F:	drivers/irqchip/irq-mips-gic.c
+
 MIPS GENERIC PLATFORM
 M:	Paul Burton <paulburton@kernel.org>
 L:	linux-mips@vger.kernel.org

arch/mips/Kbuild.platforms

@@ -20,7 +20,6 @@ platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
 platform-$(CONFIG_MACH_LOONGSON64)	+= loongson64/
 platform-$(CONFIG_MIPS_MALTA)		+= mti-malta/
 platform-$(CONFIG_NLM_COMMON)		+= netlogic/
-platform-$(CONFIG_MIPS_PARAVIRT)	+= paravirt/
 platform-$(CONFIG_PIC32MZDA)		+= pic32/
 platform-$(CONFIG_MACH_PISTACHIO)	+= pistachio/
 platform-$(CONFIG_SOC_PNX833X)		+= pnx833x/

arch/mips/Kconfig

@@ -478,6 +478,7 @@ config MACH_LOONGSON64
 	select COMMON_CLK
 	select USE_OF
 	select BUILTIN_DTB
+	select PCI_HOST_GENERIC
 	help
 	  This enables the support of Loongson-2/3 family of machines.
 
@@ -678,6 +679,7 @@ config SGI_IP27
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
 	select MIPS_L1_CACHE_SHIFT_7
+	select NUMA
 	help
 	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
 	  workstations.  To compile a Linux kernel that runs on these, say Y
@@ -1013,24 +1015,6 @@ config NLM_XLP_BOARD
 	  This board is based on Netlogic XLP Processor.
 	  Say Y here if you have a XLP based board.
 
-config MIPS_PARAVIRT
-	bool "Para-Virtualized guest system"
-	select CEVT_R4K
-	select CSRC_R4K
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_SMP
-	select NR_CPUS_DEFAULT_4
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R2
-	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HAVE_PCI
-	select SWAP_IO_SPACE
-	help
-	  This option supports guest running under ????
-
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -1055,7 +1039,6 @@ source "arch/mips/loongson2ef/Kconfig"
 source "arch/mips/loongson32/Kconfig"
 source "arch/mips/loongson64/Kconfig"
 source "arch/mips/netlogic/Kconfig"
-source "arch/mips/paravirt/Kconfig"
 
 endmenu
 
@@ -1169,9 +1152,6 @@ config MIPS_MSC
 config SYNC_R4K
 	bool
 
-config MIPS_MACHINE
-	def_bool n
-
 config NO_IOPORT_MAP
 	def_bool n
 
@@ -2825,7 +2805,7 @@ config SMP
 	  Y to "Enhanced Real Time Clock Support", below.
 
 	  See also the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  <https://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 

arch/mips/ath79/setup.c

@@ -23,7 +23,6 @@
 #include <asm/idle.h>
 #include <asm/time.h>		/* for mips_hpt_frequency */
 #include <asm/reboot.h>		/* for _machine_{restart,halt} */
-#include <asm/mips_machine.h>
 #include <asm/prom.h>
 #include <asm/fw/fw.h>
 

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -67,7 +67,7 @@ static struct board_info __initdata board_cvg834g = {
 	.ephy_reset_gpio		= 36,
 	.ephy_reset_gpio_flags		= GPIOF_INIT_HIGH,
 };
-#endif
+#endif /* CONFIG_BCM63XX_CPU_3368 */
 
 /*
  * known 6328 boards
@@ -115,7 +115,7 @@ static struct board_info __initdata board_96328avng = {
 		},
 	},
 };
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6328 */
 
 /*
  * known 6338 boards
@@ -204,7 +204,7 @@ static struct board_info __initdata board_96338w = {
 		},
 	},
 };
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6338 */
 
 /*
  * known 6345 boards
@@ -216,7 +216,7 @@ static struct board_info __initdata board_96345gw2 = {
 
 	.has_uart0			= 1,
 };
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6345 */
 
 /*
  * known 6348 boards
@@ -464,7 +464,6 @@ static struct board_info __initdata board_rta1025w_16 = {
 	},
 };
 
-
 static struct board_info __initdata board_DV201AMR = {
 	.name				= "DV201AMR",
 	.expected_cpu_id		= 0x6348,
@@ -505,7 +504,7 @@ static struct board_info __initdata board_96348gw_a = {
 
 	.has_ohci0 = 1,
 };
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6348 */
 
 /*
  * known 6358 boards
@@ -530,7 +529,6 @@ static struct board_info __initdata board_96358vw = {
 		.force_duplex_full	= 1,
 	},
 
-
 	.has_ohci0 = 1,
 	.has_pccard = 1,
 	.has_ehci0 = 1,
@@ -654,7 +652,7 @@ static struct board_info __initdata board_DWVS0 = {
 
 	.has_ohci0			= 1,
 };
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6358 */
 
 /*
  * all boards
@@ -662,17 +660,17 @@ static struct board_info __initdata board_DWVS0 = {
 static const struct board_info __initconst *bcm963xx_boards[] = {
 #ifdef CONFIG_BCM63XX_CPU_3368
 	&board_cvg834g,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_3368 */
 #ifdef CONFIG_BCM63XX_CPU_6328
 	&board_96328avng,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6328 */
 #ifdef CONFIG_BCM63XX_CPU_6338
 	&board_96338gw,
 	&board_96338w,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6338 */
 #ifdef CONFIG_BCM63XX_CPU_6345
 	&board_96345gw2,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6345 */
 #ifdef CONFIG_BCM63XX_CPU_6348
 	&board_96348r,
 	&board_96348gw,
@@ -682,14 +680,13 @@ static const struct board_info __initconst *bcm963xx_boards[] = {
 	&board_DV201AMR,
 	&board_96348gw_a,
 	&board_rta1025w_16,
-#endif
-
+#endif /* CONFIG_BCM63XX_CPU_6348 */
 #ifdef CONFIG_BCM63XX_CPU_6358
 	&board_96358vw,
 	&board_96358vw2,
 	&board_AGPFS0,
 	&board_DWVS0,
-#endif
+#endif /* CONFIG_BCM63XX_CPU_6358 */
 };
 
 /*
@@ -728,7 +725,7 @@ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
 		return -EINVAL;
 	}
 }
-#endif
+#endif /* CONFIG_SSB_PCIHOST */
 
 /*
  * return board name for /proc/cpuinfo
@@ -763,11 +760,25 @@ void __init board_prom_init(void)
 
 	/* dump cfe version */
 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
-	if (!memcmp(cfe, "cfe-v", 5))
-		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-	else
+	if (strstarts(cfe, "cfe-")) {
+		if(cfe[4] == 'v') {
+			if(cfe[5] == 'd')
+				snprintf(cfe_version, 11, "%s",
+					 (char *) &cfe[5]);
+			else if (cfe[10] > 0)
+				snprintf(cfe_version, sizeof(cfe_version),
+					 "%u.%u.%u-%u.%u-%u", cfe[5], cfe[6],
+					 cfe[7], cfe[8], cfe[9], cfe[10]);
+			else
+				snprintf(cfe_version, sizeof(cfe_version),
+					 "%u.%u.%u-%u.%u", cfe[5], cfe[6],
+					 cfe[7], cfe[8], cfe[9]);
+		} else {
+			snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
+		}
+	} else {
 		strcpy(cfe_version, "unknown");
+	}
 	pr_info("CFE version: %s\n", cfe_version);
 
 	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
@@ -807,7 +818,7 @@ void __init board_prom_init(void)
 		if (BCMCPU_IS_6348())
 			val |= GPIO_MODE_6348_G2_PCI;
 	}
-#endif
+#endif /* CONFIG_PCI */
 
 	if (board.has_pccard) {
 		if (BCMCPU_IS_6348())
@@ -892,7 +903,7 @@ int __init board_register_devices(void)
 				&bcm63xx_get_fallback_sprom) < 0)
 			pr_err("failed to register fallback SPROM\n");
 	}
-#endif
+#endif /* CONFIG_SSB_PCIHOST */
 
 	bcm63xx_spi_register();
 

arch/mips/boot/dts/ingenic/Makefile

 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_JZ4740_QI_LB60)	+= qi_lb60.dtb
+dtb-$(CONFIG_JZ4740_RS90)	+= rs90.dtb
 dtb-$(CONFIG_JZ4770_GCW0)	+= gcw0.dtb
 dtb-$(CONFIG_JZ4780_CI20)	+= ci20.dtb
 dtb-$(CONFIG_X1000_CU1000_NEO)	+= cu1000-neo.dtb
+dtb-$(CONFIG_X1830_CU1830_NEO)	+= cu1830-neo.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))

arch/mips/boot/dts/ingenic/cu1000-neo.dts

@@ -7,8 +7,8 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
-	compatible = "yna,cu1000-neo", "ingenic,x1000";
-	model = "YSH & ATIL General Board CU Neo";
+	compatible = "yna,cu1000-neo", "ingenic,x1000e";
+	model = "YSH & ATIL General Board CU1000-Neo";
 
 	aliases {
 		serial2 = &uart2;
@@ -23,20 +23,19 @@ memory {
 		reg = <0x0 0x04000000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			gpios = <&gpb 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
 	wlan_pwrseq: msc1-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 
-		clocks = <&lpoclk>;
-		clock-names = "ext_clock";
-
 		reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
 		post-power-on-delay-ms = <200>;
-
-		lpoclk: ap6212a {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
 	};
 };
 
@@ -53,6 +52,13 @@ &tcu {
 	ingenic,pwm-channels-mask = <0xfa>;
 };
 
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -61,43 +67,15 @@ &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_i2c0>;
 
-	ads7830@48 {
+	ads7830: adc@48 {
 		compatible = "ti,ads7830";
 		reg = <0x48>;
 	};
 };
 
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_uart2>;
-
-	status = "okay";
-};
-
-&mac {
-	phy-mode = "rmii";
-	phy-handle = <&lan8720a>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_mac>;
-
-	snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 30000>;
-
-	status = "okay";
-};
-
-&mdio {
+&msc0 {
 	status = "okay";
 
-	lan8720a: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&msc0 {
 	bus-width = <8>;
 	max-frequency = <50000000>;
 
@@ -105,26 +83,23 @@ &msc0 {
 	pinctrl-0 = <&pins_msc0>;
 
 	non-removable;
-
-	status = "okay";
 };
 
 &msc1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
 	bus-width = <4>;
 	max-frequency = <50000000>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_msc1>;
 
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	non-removable;
 
 	mmc-pwrseq = <&wlan_pwrseq>;
 
-	status = "okay";
-
 	ap6212a: wifi@1 {
 		compatible = "brcm,bcm4329-fmac";
 		reg = <1>;
@@ -137,23 +112,40 @@ ap6212a: wifi@1 {
 	};
 };
 
-&pinctrl {
-	pins_i2c0: i2c0 {
-		function = "i2c0";
-		groups = "i2c0-data";
-		bias-disable;
+&mac {
+	status = "okay";
+
+	phy-mode = "rmii";
+	phy-handle = <&lan8720a>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mac>;
+
+	snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+	status = "okay";
+
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
 	};
+};
 
+&pinctrl {
 	pins_uart2: uart2 {
 		function = "uart2";
 		groups = "uart2-data-d";
-		bias-disable;
+		bias-pull-up;
 	};
 
-	pins_mac: mac {
-		function = "mac";
-		groups = "mac";
-		bias-disable;
+	pins_i2c0: i2c0 {
+		function = "i2c0";
+		groups = "i2c0-data";
+		bias-pull-up;
 	};
 
 	pins_msc0: msc0 {
@@ -167,4 +159,10 @@ pins_msc1: msc1 {
 		groups = "mmc1-1bit", "mmc1-4bit";
 		bias-disable;
 	};
+
+	pins_mac: mac {
+		function = "mac";
+		groups = "mac";
+		bias-disable;
+	};
 };

arch/mips/boot/dts/ingenic/cu1830-neo.dts

+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1830.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "yna,cu1830-neo", "ingenic,x1830";
+	model = "YSH & ATIL General Board CU1830-Neo";
+
+	aliases {
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			gpios = <&gpc 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	wlan_pwrseq: msc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpc 13 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&exclk {
+	clock-frequency = <24000000>;
+};
+
+&tcu {
+	/* 1500 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <1500000>, <1500000>;
+
+	/* Use channel #0 for the system timer channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c0>;
+
+	ads7830: adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+};
+
+&msc0 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc0>;
+
+	non-removable;
+};
+
+&msc1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc1>;
+
+	non-removable;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	ap6212a: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpc>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		brcm,drive-strength = <10>;
+	};
+};
+
+&mac {
+	status = "okay";
+
+	phy-mode = "rmii";
+	phy-handle = <&ip101gr>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mac>;
+
+	snps,reset-gpio = <&gpb 28 GPIO_ACTIVE_LOW>; /* PB28 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+	status = "okay";
+
+	ip101gr: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pins_uart1: uart1 {
+		function = "uart1";
+		groups = "uart1-data";
+		bias-pull-up;
+	};
+
+	pins_i2c0: i2c0 {
+		function = "i2c0";
+		groups = "i2c0-data";
+		bias-pull-up;
+	};
+
+	pins_msc0: msc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit", "mmc0-4bit";
+		bias-disable;
+	};
+
+	pins_msc1: msc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit", "mmc1-4bit";
+		bias-disable;
+	};
+
+	pins_mac: mac {
+		function = "mac";
+		groups = "mac";
+		bias-disable;
+	};
+};

arch/mips/boot/dts/ingenic/jz4725b.dtsi

+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4725b-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4725b";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4725b-intc", "ingenic,jz4740-intc";
+		reg = <0x10001000 0x14>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: clock-controller@10000000 {
+		compatible = "ingenic,jz4725b-cgu";
+		reg = <0x10000000 0x100>;
+
+		clocks = <&ext>, <&osc32k>;
+		clock-names = "ext", "osc32k";
+
+		#clock-cells = <1>;
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4725b-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4725B_CLK_RTC>,
+			 <&cgu JZ4725B_CLK_EXT>,
+			 <&cgu JZ4725B_CLK_PCLK>,
+			 <&cgu JZ4725B_CLK_TCU>;
+		clock-names = "rtc", "ext", "pclk", "tcu";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <23>, <22>, <21>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4725b-watchdog", "ingenic,jz4740-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+
+		pwm: pwm@60 {
+			compatible = "ingenic,jz4725b-pwm";
+			reg = <0x60 0x40>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>;
+			clock-names = "timer0", "timer1", "timer2",
+				      "timer3", "timer4", "timer5";
+		};
+
+		ost: timer@e0 {
+			compatible = "ingenic,jz4725b-ost";
+			reg = <0xe0 0x20>;
+
+			clocks = <&tcu TCU_CLK_OST>;
+			clock-names = "ost";
+
+			interrupts = <15>;
+		};
+	};
+
+	rtc_dev: rtc@10003000 {
+		compatible = "ingenic,jz4725b-rtc", "ingenic,jz4740-rtc";
+		reg = <0x10003000 0x40>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <6>;
+
+		clocks = <&cgu JZ4725B_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pinctrl@10010000 {
+		compatible = "ingenic,jz4725b-pinctrl";
+		reg = <0x10010000 0x400>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4725b-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4725b-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4725b-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4725b-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+	};
+
+	aic: audio-controller@10020000 {
+		compatible = "ingenic,jz4725b-i2s", "ingenic,jz4740-i2s";
+		reg = <0x10020000 0x38>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4725B_CLK_AIC>,
+			 <&cgu JZ4725B_CLK_I2S>,
+			 <&cgu JZ4725B_CLK_EXT>,
+			 <&cgu JZ4725B_CLK_PLL_HALF>;
+		clock-names = "aic", "i2s", "ext", "pll half";
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+		dma-names = "rx", "tx";
+	};
+
+	codec: audio-codec@100200a4 {
+		compatible = "ingenic,jz4725b-codec";
+		reg = <0x100200a4 0x8>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4725B_CLK_AIC>;
+		clock-names = "aic";
+	};
+
+	mmc0: mmc@10021000 {
+		compatible = "ingenic,jz4725b-mmc";
+		reg = <0x10021000 0x1000>;
+
+		clocks = <&cgu JZ4725B_CLK_MMC0>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <25>;
+
+		dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+	};
+
+	mmc1: mmc@10022000 {
+		compatible = "ingenic,jz4725b-mmc";
+		reg = <0x10022000 0x1000>;
+
+		clocks = <&cgu JZ4725B_CLK_MMC1>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <24>;
+
+		dmas = <&dmac 31 0xffffffff>, <&dmac 30 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+	};
+
+	uart: serial@10030000 {
+		compatible = "ingenic,jz4725b-uart", "ingenic,jz4740-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <9>;
+
+		clocks = <&ext>, <&cgu JZ4725B_CLK_UART>;
+		clock-names = "baud", "module";
+	};
+
+	adc: adc@10070000 {
+		compatible = "ingenic,jz4725b-adc";
+		#io-channel-cells = <1>;
+
+		reg = <0x10070000 0x30>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10070000 0x30>;
+
+		clocks = <&cgu JZ4725B_CLK_ADC>;
+		clock-names = "adc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	nemc: memory-controller@13010000 {
+		compatible = "ingenic,jz4725b-nemc", "ingenic,jz4740-nemc";
+		reg = <0x13010000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0x18000000 0x4000000>, <2 0 0x14000000 0x4000000>,
+			 <3 0 0x0c000000 0x4000000>, <4 0 0x08000000 0x4000000>;
+
+		clocks = <&cgu JZ4725B_CLK_MCLK>;
+	};
+
+	dmac: dma-controller@13020000 {
+		compatible = "ingenic,jz4725b-dma";
+		reg = <0x13020000 0xd8>, <0x13020300 0x14>;
+
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <29>;
+
+		clocks = <&cgu JZ4725B_CLK_DMA>;
+	};
+
+	udc: usb@13040000 {
+		compatible = "ingenic,jz4725b-musb", "ingenic,jz4740-musb";
+		reg = <0x13040000 0x10000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27>;
+		interrupt-names = "mc";
+
+		clocks = <&cgu JZ4725B_CLK_UDC>;
+		clock-names = "udc";
+	};
+
+	lcd: lcd-controller@13050000 {
+		compatible = "ingenic,jz4725b-lcd";
+		reg = <0x13050000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <31>;
+
+		clocks = <&cgu JZ4725B_CLK_LCD>;
+		clock-names = "lcd_pclk";
+
+		lcd_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@8 {
+				reg = <8>;
+
+				ipu_output: endpoint {
+					remote-endpoint = <&ipu_input>;
+				};
+			};
+		};
+	};
+
+	ipu: ipu@13080000 {
+		compatible = "ingenic,jz4725b-ipu";
+		reg = <0x13080000 0x64>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <30>;
+
+		clocks = <&cgu JZ4725B_CLK_IPU>;
+		clock-names = "ipu";
+
+		port {
+			ipu_input: endpoint {
+				remote-endpoint = <&ipu_output>;
+			};
+		};
+	};
+
+	bch: ecc-controller@130d0000 {
+		compatible = "ingenic,jz4725b-bch";
+		reg = <0x130d0000 0x44>;
+
+		clocks = <&cgu JZ4725B_CLK_BCH>;
+	};
+
+	rom: memory@1fc00000 {
+		compatible = "mtd-rom";
+		probe-type = "map_rom";
+		reg = <0x1fc00000 0x2000>;
+
+		bank-width = <4>;
+		device-width = <1>;
+	};
+};

arch/mips/boot/dts/ingenic/qi_lb60.dts

@@ -16,6 +16,12 @@
 
 / {
 	compatible = "qi,lb60", "ingenic,jz4740";
+	model = "Ben Nanonote";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
 
 	chosen {
 		stdout-path = &uart0;
@@ -69,7 +75,7 @@ sound {
 			"Speaker", "OUTL",
 			"Speaker", "OUTR",
 			"INL", "LOUT",
-			"INL", "ROUT";
+			"INR", "ROUT";
 
 		simple-audio-card,aux-devs = <&amp>;
 

arch/mips/boot/dts/ingenic/rs90.dts

+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4725b.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	compatible = "ylm,rs90", "ingenic,jz4725b";
+	model = "RS-90";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	vcc: regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vcc";
+		regulaor-min-microvolt = <3300000>;
+		regulaor-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 40000 0>;
+
+		brightness-levels = <0 16 32 48 64 80 112 144 192 255>;
+		default-brightness-level = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_pwm3>;
+
+		power-supply = <&vcc>;
+	};
+
+	keys@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key@0 {
+			label = "D-pad up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpc 10 GPIO_ACTIVE_LOW>;
+		};
+
+		key@1 {
+			label = "D-pad down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpc 11 GPIO_ACTIVE_LOW>;
+		};
+
+		key@2 {
+			label = "D-pad left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpb 31 GPIO_ACTIVE_LOW>;
+		};
+
+		key@3 {
+			label = "D-pad right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpd 21 GPIO_ACTIVE_LOW>;
+		};
+
+		key@4 {
+			label = "Button A";
+			linux,code = <KEY_LEFTCTRL>;
+			gpios = <&gpc 31 GPIO_ACTIVE_LOW>;
+		};
+
+		key@5 {
+			label = "Button B";
+			linux,code = <KEY_LEFTALT>;
+			gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+		};
+
+		key@6 {
+			label = "Right shoulder button";
+			linux,code = <KEY_BACKSPACE>;
+			gpios = <&gpc 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+		};
+
+		key@7 {
+			label = "Start button";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpd 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys@1 {
+		compatible = "adc-keys";
+		io-channels = <&adc INGENIC_ADC_AUX>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1400000>;
+		poll-interval = <30>;
+
+		key@0 {
+			label = "Left shoulder button";
+			linux,code = <KEY_TAB>;
+			press-threshold-microvolt = <800000>;
+		};
+
+		key@1 {
+			label = "Select button";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1100000>;
+		};
+	};
+
+	amp: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>;
+
+		VCC-supply = <&vcc>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "rs90-audio";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,widgets =
+			"Speaker", "Speaker",
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"INL", "LHPOUT",
+			"INR", "RHPOUT",
+			"Headphones", "LHPOUT",
+			"Headphones", "RHPOUT",
+			"Speaker", "OUTL",
+			"Speaker", "OUTR";
+		simple-audio-card,pin-switches = "Speaker";
+
+		simple-audio-card,hp-det-gpio = <&gpd 16 GPIO_ACTIVE_LOW>;
+		simple-audio-card,aux-devs = <&amp>;
+
+		simple-audio-card,bitclock-master = <&dai_codec>;
+		simple-audio-card,frame-master = <&dai_codec>;
+
+		dai_cpu: simple-audio-card,cpu {
+			sound-dai = <&aic>;
+		};
+
+		dai_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+
+	};
+
+	usb_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+
+		clocks = <&cgu JZ4725B_CLK_UDC_PHY>;
+		clock-names = "main_clk";
+		vcc-supply = <&vcc>;
+	};
+
+	panel {
+		compatible = "sharp,ls020b1dd01d";
+
+		backlight = <&backlight>;
+		power-supply = <&vcc>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&panel_output>;
+			};
+		};
+	};
+};
+
+&ext {
+	clock-frequency = <12000000>;
+};
+
+&rtc_dev {
+	system-power-controller;
+};
+
+&udc {
+	phys = <&usb_phy>;
+};
+
+&pinctrl {
+	pins_mmc1: mmc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit";
+	};
+
+	pins_nemc: nemc {
+		function = "nand";
+		groups = "nand-cs1", "nand-cle-ale", "nand-fre-fwe";
+	};
+
+	pins_pwm3: pwm3 {
+		function = "pwm3";
+		groups = "pwm3";
+		bias-disable;
+	};
+
+	pins_lcd: lcd {
+		function = "lcd";
+		groups = "lcd-8bit", "lcd-16bit", "lcd-special";
+	};
+};
+
+&mmc0 {
+	status = "disabled";
+};
+
+&mmc1 {
+	bus-width = <1>;
+	max-frequency = <48000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc1>;
+
+	cd-gpios = <&gpc 20 GPIO_ACTIVE_LOW>;
+};
+
+&uart {
+	/*
+	 * The pins for RX/TX are used for the right shoulder button and
+	 * backlight PWM.
+	 */
+	status = "disabled";
+};
+
+&nemc {
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4725b-nand";
+		reg = <1 0 0x4000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ecc-engine = <&bch>;
+
+		ingenic,nemc-tAS = <10>;
+		ingenic,nemc-tAH = <5>;
+		ingenic,nemc-tBP = <10>;
+		ingenic,nemc-tAW = <15>;
+		ingenic,nemc-tSTRV = <100>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
+		rb-gpios = <&gpc 27 GPIO_ACTIVE_HIGH>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <512>;
+			nand-ecc-strength = <8>;
+			nand-ecc-mode = "hw";
+			nand-is-boot-medium;
+			nand-on-flash-bbt;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "bootloader";
+					reg = <0x0 0x20000>;
+				};
+
+				partition@20000 {
+					label = "system";
+					reg = <0x20000 0x0>;
+				};
+			};
+		};
+	};
+};
+
+&cgu {
+	/* Use 32kHz oscillator as the parent of the RTC clock */
+	assigned-clocks = <&cgu JZ4725B_CLK_RTC>;
+	assigned-clock-parents = <&cgu JZ4725B_CLK_OSC32K>;
+};
+
+&tcu {
+	/*
+	 * 750 kHz for the system timer and clocksource, and use RTC as the
+	 * parent for the watchdog clock.
+	 */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, <&tcu TCU_CLK_WDT>;
+	assigned-clock-parents = <0>, <0>, <&cgu JZ4725B_CLK_RTC>;
+	assigned-clock-rates = <750000>, <750000>;
+};
+
+&lcd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_lcd>;
+};
+
+&lcd_ports {
+	port@0 {
+		reg = <0>;
+
+		panel_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};

arch/mips/boot/dts/ingenic/x1000.dtsi

@@ -48,9 +48,7 @@ cgu: x1000-cgu@10000000 {
 	};
 
 	tcu: timer@10002000 {
-		compatible = "ingenic,x1000-tcu",
-				 "ingenic,jz4770-tcu",
-				 "simple-mfd";
+		compatible = "ingenic,x1000-tcu", "simple-mfd";
 		reg = <0x10002000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -156,48 +154,6 @@ gpd: gpio@3 {
 		};
 	};
 
-	i2c0: i2c-controller@10050000 {
-		compatible = "ingenic,x1000-i2c";
-		reg = <0x10050000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <60>;
-
-		clocks = <&cgu X1000_CLK_I2C0>;
-
-		status = "disabled";
-	};
-
-	i2c1: i2c-controller@10051000 {
-		compatible = "ingenic,x1000-i2c";
-		reg = <0x10051000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <59>;
-
-		clocks = <&cgu X1000_CLK_I2C1>;
-
-		status = "disabled";
-	};
-
-	i2c2: i2c-controller@10052000 {
-		compatible = "ingenic,x1000-i2c";
-		reg = <0x10052000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <58>;
-
-		clocks = <&cgu X1000_CLK_I2C2>;
-
-		status = "disabled";
-	};
-
 	uart0: serial@10030000 {
 		compatible = "ingenic,x1000-uart";
 		reg = <0x10030000 0x100>;
@@ -237,37 +193,57 @@ uart2: serial@10032000 {
 		status = "disabled";
 	};
 
-	pdma: dma-controller@13420000 {
-		compatible = "ingenic,x1000-dma";
-		reg = <0x13420000 0x400>, <0x13421000 0x40>;
-		#dma-cells = <2>;
+	i2c0: i2c-controller@10050000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10050000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		interrupt-parent = <&intc>;
-		interrupts = <10>;
+		interrupts = <60>;
 
-		clocks = <&cgu X1000_CLK_PDMA>;
+		clocks = <&cgu X1000_CLK_I2C0>;
+
+		status = "disabled";
 	};
 
-	mac: ethernet@134b0000 {
-		compatible = "ingenic,x1000-mac", "snps,dwmac";
-		reg = <0x134b0000 0x2000>;
+	i2c1: i2c-controller@10051000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10051000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		interrupt-parent = <&intc>;
-		interrupts = <55>;
-		interrupt-names = "macirq";
+		interrupts = <59>;
 
-		clocks = <&cgu X1000_CLK_MAC>;
-		clock-names = "stmmaceth";
+		clocks = <&cgu X1000_CLK_I2C1>;
 
 		status = "disabled";
+	};
 
-		mdio: mdio {
-			compatible = "snps,dwmac-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
+	i2c2: i2c-controller@10052000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10052000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-			status = "disabled";
-		};
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu X1000_CLK_I2C2>;
+
+		status = "disabled";
+	};
+
+	pdma: dma-controller@13420000 {
+		compatible = "ingenic,x1000-dma";
+		reg = <0x13420000 0x400>, <0x13421000 0x40>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu X1000_CLK_PDMA>;
 	};
 
 	msc0: mmc@13450000 {
@@ -311,4 +287,26 @@ msc1: mmc@13460000 {
 
 		status = "disabled";
 	};
+
+	mac: ethernet@134b0000 {
+		compatible = "ingenic,x1000-mac", "snps,dwmac";
+		reg = <0x134b0000 0x2000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <55>;
+		interrupt-names = "macirq";
+
+		clocks = <&cgu X1000_CLK_MAC>;
+		clock-names = "stmmaceth";
+
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
 };

arch/mips/boot/dts/ingenic/x1830.dtsi

+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/x1830-cgu.h>
+#include <dt-bindings/dma/x1830-dma.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,x1830";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	exclk: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtclk: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: x1830-cgu@10000000 {
+		compatible = "ingenic,x1830-cgu";
+		reg = <0x10000000 0x100>;
+
+		#clock-cells = <1>;
+
+		clocks = <&exclk>, <&rtclk>;
+		clock-names = "ext", "rtc";
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu X1830_CLK_RTCLK
+			  &cgu X1830_CLK_EXCLK
+			  &cgu X1830_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		wdt: watchdog@0 {
+			compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog";
+			reg = <0x0 0x10>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+	};
+
+	rtc: rtc@10003000 {
+		compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc";
+		reg = <0x10003000 0x4c>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+
+		clocks = <&cgu X1830_CLK_RTCLK>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,x1830-pinctrl";
+		reg = <0x10010000 0x800>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,x1830-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,x1830-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,x1830-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,x1830-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>;
+
+		clocks = <&exclk>, <&cgu X1830_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <50>;
+
+		clocks = <&exclk>, <&cgu X1830_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	i2c0: i2c-controller@10050000 {
+		compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+		reg = <0x10050000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <60>;
+
+		clocks = <&cgu X1830_CLK_SMB0>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c-controller@10051000 {
+		compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+		reg = <0x10051000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <59>;
+
+		clocks = <&cgu X1830_CLK_SMB1>;
+
+		status = "disabled";
+	};
+
+	i2c2: i2c-controller@10052000 {
+		compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+		reg = <0x10052000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu X1830_CLK_SMB2>;
+
+		status = "disabled";
+	};
+
+	pdma: dma-controller@13420000 {
+		compatible = "ingenic,x1830-dma";
+		reg = <0x13420000 0x400
+			   0x13421000 0x40>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu X1830_CLK_PDMA>;
+	};
+
+	msc0: mmc@13450000 {
+		compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+		reg = <0x13450000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		clocks = <&cgu X1830_CLK_MSC0>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>,
+			   <&pdma X1830_DMA_MSC0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	msc1: mmc@13460000 {
+		compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+		reg = <0x13460000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		clocks = <&cgu X1830_CLK_MSC1>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>,
+			   <&pdma X1830_DMA_MSC1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	mac: ethernet@134b0000 {
+		compatible = "ingenic,x1830-mac", "snps,dwmac";
+		reg = <0x134b0000 0x2000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <55>;
+		interrupt-names = "macirq";
+
+		clocks = <&cgu X1830_CLK_MAC>;
+		clock-names = "stmmaceth";
+
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+};

arch/mips/boot/dts/loongson/Makefile

 # SPDX_License_Identifier: GPL_2.0
-dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson3_4core_rs780e.dtb loongson3_8core_rs780e.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_4core_ls7a.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_4core_rs780e.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_8core_rs780e.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64g_4core_ls7a.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64v_4core_virtio.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))

arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts

+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64c-package.dtsi"
+#include "ls7a-pch.dtsi"
+
+/ {
+	compatible = "loongson,loongson64c-4core-ls7a";
+};
+
+&package0 {
+	htvec: interrupt-controller@efdfb000080 {
+		compatible = "loongson,htvec-1.0";
+		reg = <0xefd 0xfb000080 0x40>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&liointc>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+			     <25 IRQ_TYPE_LEVEL_HIGH>,
+			     <26 IRQ_TYPE_LEVEL_HIGH>,
+			     <27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pch {
+	msi: msi-controller@2ff00000 {
+		compatible = "loongson,pch-msi-1.0";
+		reg = <0 0x2ff00000 0 0x8>;
+		interrupt-controller;
+		msi-controller;
+		loongson,msi-base-vec = <64>;
+		loongson,msi-num-vecs = <64>;
+		interrupt-parent = <&htvec>;
+	};
+};

arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dts → arch/mips/boot/dts/loongson/loongson64c_4core_rs780e.dts

@@ -2,11 +2,11 @@
 
 /dts-v1/;
 
-#include "loongson3-package.dtsi"
+#include "loongson64c-package.dtsi"
 #include "rs780e-pch.dtsi"
 
 / {
-	compatible = "loongson,loongson3-4core-rs780e";
+	compatible = "loongson,loongson64c-4core-rs780e";
 };
 
 &package0 {

arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dts → arch/mips/boot/dts/loongson/loongson64c_8core_rs780e.dts

@@ -2,11 +2,11 @@
 
 /dts-v1/;
 
-#include "loongson3-package.dtsi"
+#include "loongson64c-package.dtsi"
 #include "rs780e-pch.dtsi"
 
 / {
-	compatible = "loongson,loongson3-8core-rs780e";
+	compatible = "loongson,loongson64c-8core-rs780e";
 };
 
 &package0 {

arch/mips/boot/dts/loongson/loongson64g-package.dtsi

+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	package0: bus@1fe00000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+			0 0x3ff00000 0 0x3ff00000 0x100000
+			0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>;
+
+		liointc: interrupt-controller@3ff01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0 0x3ff01400 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>;
+			interrupt-names = "int0", "int1";
+
+			loongson,parent_int_map = <0x00ffffff>, /* int0 */
+						<0xff000000>, /* int1 */
+						<0x00000000>, /* int2 */
+						<0x00000000>; /* int3 */
+
+		};
+
+		cpu_uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0 0x1fe00100 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+
+		cpu_uart1: serial@1fe001e8 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1fe00110 0x10>;
+			clock-frequency = <100000000>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&liointc>;
+			no-loopback-test;
+		};
+	};
+};

arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts

+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64g-package.dtsi"
+#include "ls7a-pch.dtsi"
+
+/ {
+	compatible = "loongson,loongson64g-4core-ls7a";
+};
+
+&package0 {
+	htvec: interrupt-controller@efdfb000080 {
+		compatible = "loongson,htvec-1.0";
+		reg = <0xefd 0xfb000080 0x40>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&liointc>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+			     <25 IRQ_TYPE_LEVEL_HIGH>,
+			     <26 IRQ_TYPE_LEVEL_HIGH>,
+			     <27 IRQ_TYPE_LEVEL_HIGH>,
+			     <28 IRQ_TYPE_LEVEL_HIGH>,
+			     <29 IRQ_TYPE_LEVEL_HIGH>,
+			     <30 IRQ_TYPE_LEVEL_HIGH>,
+			     <31 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pch {
+	msi: msi-controller@2ff00000 {
+		compatible = "loongson,pch-msi-1.0";
+		reg = <0 0x2ff00000 0 0x8>;
+		interrupt-controller;
+		msi-controller;
+		loongson,msi-base-vec = <64>;
+		loongson,msi-num-vecs = <192>;
+		interrupt-parent = <&htvec>;
+	};
+};

arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts

+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/ {
+	compatible = "loongson,loongson64v-4core-virtio";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	package0: bus@1fe00000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+			0 0x3ff00000 0 0x3ff00000 0x100000
+			0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>;
+
+		liointc: interrupt-controller@3ff01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0 0x3ff01400 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>;
+			interrupt-names = "int0", "int1";
+
+			loongson,parent_int_map = <0x00000001>, /* int0 */
+						<0xfffffffe>, /* int1 */
+						<0x00000000>, /* int2 */
+						<0x00000000>; /* int3 */
+
+		};
+
+		cpu_uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0 0x1fe001e0 0x8>;
+			clock-frequency = <33000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */
+				0 0x40000000 0 0x40000000 0 0x40000000>; /* PCI MEM */
+
+		rtc0: rtc@10081000 {
+			compatible = "google,goldfish-rtc";
+			reg = <0 0x10081000 0 0x1000>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&liointc>;
+		};
+
+		pci@1a000000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			bus-range = <0x0 0x1f>;
+			reg = <0 0x1a000000 0 0x02000000>;
+
+			ranges = <0x01000000 0x0 0x00004000 0x0 0x18004000 0x0 0x0000c000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			interrupt-map = <
+				0x0000 0x0 0x0  0x1  &liointc  0x2 IRQ_TYPE_LEVEL_HIGH
+				0x0800 0x0 0x0  0x1  &liointc  0x3 IRQ_TYPE_LEVEL_HIGH
+				0x1000 0x0 0x0  0x1  &liointc  0x4 IRQ_TYPE_LEVEL_HIGH
+				0x1800 0x0 0x0  0x1  &liointc  0x5 IRQ_TYPE_LEVEL_HIGH
+				>;
+
+			interrupt-map-mask = <0x1800 0x0 0x0  0x7>;
+		};
+
+		isa {
+			compatible = "isa";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <1 0 0 0x18000000 0x4000>;
+		};
+	};
+
+	hypervisor {
+		compatible = "linux,kvm";
+	};
+};

arch/mips/boot/dts/loongson/ls7a-pch.dtsi

+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	pch: bus@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */
+				0 0x20000000 0 0x20000000 0 0x10000000
+				0 0x40000000 0 0x40000000 0 0x40000000 /* PCI MEM */
+				0xe00 0x00000000 0xe00 0x00000000 0x100 0x0000000>;
+
+		pic: interrupt-controller@10000000 {
+			compatible = "loongson,pch-pic-1.0";
+			reg = <0 0x10000000 0 0x400>;
+			interrupt-controller;
+			interrupt-parent = <&htvec>;
+			loongson,pic-base-vec = <0>;
+			#interrupt-cells = <2>;
+		};
+
+		pci@1a000000 {
+			compatible = "loongson,ls7a-pci";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <2>;
+			msi-parent = <&msi>;
+
+			reg = <0 0x1a000000 0 0x02000000>,
+				<0xefe 0x00000000 0 0x20000000>;
+
+			ranges = <0x01000000 0x0 0x00020000 0x0 0x18020000 0x0 0x00020000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			ohci@4,0 {
+				compatible = "pci0014,7a24.0",
+						   "pci0014,7a24",
+						   "pciclass0c0310",
+						   "pciclass0c03";
+
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			ehci@4,1 {
+				compatible = "pci0014,7a14.0",
+						   "pci0014,7a14",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+				reg = <0x2100 0x0 0x0 0x0 0x0>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			ohci@5,0 {
+				compatible = "pci0014,7a24.0",
+						   "pci0014,7a24",
+						   "pciclass0c0310",
+						   "pciclass0c03";
+
+				reg = <0x2800 0x0 0x0 0x0 0x0>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			ehci@5,1 {
+				compatible = "pci0014,7a14.0",
+						   "pci0014,7a14",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+				reg = <0x2900 0x0 0x0 0x0 0x0>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			sata@8,0 {
+				compatible = "pci0014,7a08.0",
+						   "pci0014,7a08",
+						   "pciclass010601",
+						   "pciclass0106";
+
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			sata@8,1 {
+				compatible = "pci0014,7a08.0",
+						   "pci0014,7a08",
+						   "pciclass010601",
+						   "pciclass0106";
+
+				reg = <0x4100 0x0 0x0 0x0 0x0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			sata@8,2 {
+				compatible = "pci0014,7a08.0",
+						   "pci0014,7a08",
+						   "pciclass010601",
+						   "pciclass0106";
+
+				reg = <0x4200 0x0 0x0 0x0 0x0>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			gpu@6,0 {
+				compatible = "pci0014,7a15.0",
+						   "pci0014,7a15",
+						   "pciclass030200",
+						   "pciclass0302";
+
+				reg = <0x3000 0x0 0x0 0x0 0x0>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			dc@6,1 {
+				compatible = "pci0014,7a06.0",
+						   "pci0014,7a06",
+						   "pciclass030000",
+						   "pciclass0300";
+
+				reg = <0x3100 0x0 0x0 0x0 0x0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			hda@7,0 {
+				compatible = "pci0014,7a07.0",
+						   "pci0014,7a07",
+						   "pciclass040300",
+						   "pciclass0403";
+
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			gmac@3,0 {
+				compatible = "pci0014,7a03.0",
+						   "pci0014,7a03",
+						   "pciclass020000",
+						   "pciclass0200";
+
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				interrupt-parent = <&pic>;
+				phy-mode = "rgmii";
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "snps,dwmac-mdio";
+					phy0: ethernet-phy@0 {
+						reg = <0>;
+					};
+				};
+			};
+
+			gmac@3,1 {
+				compatible = "pci0014,7a03.0",
+						   "pci0014,7a03",
+						   "pciclass020000",
+						   "pciclass0200";
+
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				interrupt-parent = <&pic>;
+				phy-mode = "rgmii";
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "snps,dwmac-mdio";
+					phy1: ethernet-phy@1 {
+						reg = <0>;
+					};
+				};
+			};
+
+			pci_bridge@9,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@a,0 {
+				compatible = "pci0014,7a09.1",
+						   "pci0014,7a09",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@b,0 {
+				compatible = "pci0014,7a09.1",
+						   "pci0014,7a09",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@c,0 {
+				compatible = "pci0014,7a09.1",
+						   "pci0014,7a09",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@d,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@e,0 {
+				compatible = "pci0014,7a09.1",
+						   "pci0014,7a09",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@f,0 {
+				compatible = "pci0014,7a29.1",
+						   "pci0014,7a29",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x7800 0x0 0x0 0x0 0x0>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@10,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x8000 0x0 0x0 0x0 0x0>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 41 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@11,0 {
+				compatible = "pci0014,7a29.1",
+						   "pci0014,7a29",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x8800 0x0 0x0 0x0 0x0>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@12,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x9000 0x0 0x0 0x0 0x0>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 43 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@13,0 {
+				compatible = "pci0014,7a29.1",
+						   "pci0014,7a29",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x9800 0x0 0x0 0x0 0x0>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@14,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0xa000 0x0 0x0 0x0 0x0>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		isa {
+			compatible = "isa";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <1 0 0 0x18000000 0x20000>;
+		};
+	};
+};

arch/mips/boot/dts/loongson/rs780e-pch.dtsi

@@ -17,7 +17,7 @@ pci@1a000000 {
 
 			reg = <0 0x1a000000 0 0x02000000>;
 
-			ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x00004000>,
+			ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x0000c000>,
 				 <0x02000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 		};
 
@@ -25,7 +25,7 @@ isa {
 			compatible = "isa";
 			#address-cells = <2>;
 			#size-cells = <1>;
-			ranges = <1 0 0 0 0x1000>;
+			ranges = <1 0 0 0x18000000 0x4000>;
 
 			rtc0: rtc@70 {
 				compatible = "motorola,mc146818";

arch/mips/cavium-octeon/octeon-usb.c

@@ -518,6 +518,7 @@ static int __init dwc3_octeon_device_init(void)
 
 			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 			if (res == NULL) {
+				put_device(&pdev->dev);
 				dev_err(&pdev->dev, "No memory resources\n");
 				return -ENXIO;
 			}
@@ -529,8 +530,10 @@ static int __init dwc3_octeon_device_init(void)
 			 * know the difference.
 			 */
 			base = devm_ioremap_resource(&pdev->dev, res);
-			if (IS_ERR(base))
+			if (IS_ERR(base)) {
+				put_device(&pdev->dev);
 				return PTR_ERR(base);
+			}
 
 			mutex_lock(&dwc3_octeon_clocks_mutex);
 			dwc3_octeon_clocks_start(&pdev->dev, (u64)base);

arch/mips/configs/ci20_defconfig

@@ -128,6 +128,7 @@ CONFIG_DMA_JZ4780=y
 CONFIG_INGENIC_OST=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
+CONFIG_JZ4780_NEMC=y
 CONFIG_PWM=y
 CONFIG_PWM_JZ4740=m
 CONFIG_EXT4_FS=y

arch/mips/configs/cu1000-neo_defconfig

@@ -74,6 +74,10 @@ CONFIG_JZ4740_WDT=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_JZ4740=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_JZ4740=y
 CONFIG_DMADEVICES=y

arch/mips/configs/cu1830-neo_defconfig

+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_KERNEL_GZIP=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MACH_INGENIC=y
+CONFIG_X1830_CU1830_NEO=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+# CONFIG_SECCOMP is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPACTION is not set
+CONFIG_CMA=y
+CONFIG_CMA_AREAS=7
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CFG80211=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_BRCMFMAC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_JZ4780=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_SENSORS_ADS7828=y
+CONFIG_WATCHDOG=y
+CONFIG_JZ4740_WDT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_JZ4740=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4780=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_PRINTK_TIME=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_CONSOLE_LOGLEVEL_QUIET=15
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PANIC_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_STACKTRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon clk_ignore_unused"

arch/mips/configs/loongson3_defconfig

@@ -15,7 +15,13 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
 CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
 CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
@@ -23,16 +29,16 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_MACH_LOONGSON64=y
+CONFIG_CPU_HAS_MSA=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=16
 CONFIG_HZ_256=y
 CONFIG_KEXEC=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEASPM_PERFORMANCE=y
-CONFIG_HOTPLUG_PCI=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_MIPS_VZ=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -56,11 +62,19 @@ CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_TABLES=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_NAT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -74,28 +88,56 @@ CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_IP_SET=m
 CONFIG_IP_VS=m
+CONFIG_NF_TABLES_IPV4=y
+CONFIG_NF_TABLES_ARP=y
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_TABLES_IPV6=y
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
 CONFIG_IP_SCTP=m
 CONFIG_L2TP=m
 CONFIG_BRIDGE=m
+CONFIG_VSOCKETS=m
+CONFIG_VIRTIO_VSOCKETS=m
 CONFIG_CFG80211=m
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=y
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
+CONFIG_HOTPLUG_PCI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=m
@@ -103,6 +145,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_VIRTIO_BLK=y
 CONFIG_RAID_ATTRS=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
@@ -118,6 +161,7 @@ CONFIG_MEGARAID_MM=y
 CONFIG_MEGARAID_MAILBOX=y
 CONFIG_MEGARAID_LEGACY=y
 CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_PATA_ATIIXP=y
@@ -141,7 +185,10 @@ CONFIG_TCM_PSCSI=m
 CONFIG_LOOPBACK_TARGET=m
 CONFIG_ISCSI_TARGET=m
 CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
 CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
 # CONFIG_NET_VENDOR_ALTEON is not set
@@ -200,6 +247,8 @@ CONFIG_ATH9K=m
 CONFIG_HOSTAP=m
 CONFIG_INPUT_POLLDEV=m
 CONFIG_INPUT_SPARSEKMAP=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2_SENTELIC=y
@@ -209,7 +258,6 @@ CONFIG_INPUT_UINPUT=m
 CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_RAW=m
 CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=16
@@ -218,6 +266,8 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_RAW_DRIVER=m
 CONFIG_I2C_CHARDEV=y
@@ -232,6 +282,8 @@ CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_DRM=y
 CONFIG_DRM_RADEON=m
+CONFIG_DRM_QXL=y
+CONFIG_DRM_VIRTIO_GPU=y
 CONFIG_FB_RADEON=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=m
@@ -248,10 +300,15 @@ CONFIG_SND_SEQ_DUMMY=m
 CONFIG_SND_HDA_INTEL=m
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_SIGMATEL=m
+CONFIG_SND_HDA_CODEC_HDMI=m
 CONFIG_SND_HDA_CODEC_CONEXANT=m
 # CONFIG_SND_USB is not set
+CONFIG_HIDRAW=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_SUNPLUS=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=m
@@ -264,7 +321,16 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_GOLDFISH=y
 CONFIG_DMADEVICES=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VHOST_NET=m
+CONFIG_VHOST_SCSI=m
+CONFIG_VHOST_VSOCK=m
+CONFIG_GOLDFISH=y
 CONFIG_PM_DEVFREQ=y
 CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
 CONFIG_DEVFREQ_GOV_PERFORMANCE=y
@@ -277,10 +343,16 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_POSIX_ACL=y
 CONFIG_QUOTA=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_VIRTIO_FS=m
+CONFIG_FSCACHE=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_MSDOS_FS=m
@@ -301,6 +373,9 @@ CONFIG_NFSD=m
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_CIFS=m
+CONFIG_9P_FS=m
+CONFIG_9P_FSCACHE=y
+CONFIG_9P_FS_POSIX_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_936=y
 CONFIG_NLS_ASCII=y
@@ -334,3 +409,5 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ieee754=relaxed"

arch/mips/configs/mips_paravirt_defconfig

-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MIPS_PARAVIRT=y
-CONFIG_CPU_MIPS64_R2=y
-CONFIG_64BIT=y
-CONFIG_SMP=y
-CONFIG_HZ_1000=y
-CONFIG_PCI=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_VIRTIO_NET=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_PHYLIB=y
-CONFIG_BCM87XX_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_VIRTIO_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_MMIO=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set

arch/mips/configs/qi_lb60_defconfig

@@ -108,6 +108,7 @@ CONFIG_RTC_DRV_JZ4740=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_JZ4780=y
 CONFIG_MEMORY=y
+CONFIG_JZ4780_NEMC=y
 CONFIG_IIO=y
 CONFIG_INGENIC_ADC=y
 CONFIG_PWM=y

arch/mips/configs/rs90_defconfig

+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="rs90"
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
+# CONFIG_SGETMASK_SYSCALL is not set
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_AIO is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_PERF_EVENTS is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MACH_INGENIC=y
+CONFIG_JZ4740_RS90=y
+CONFIG_PAGE_SIZE_16KB=y
+CONFIG_HZ_100=y
+# CONFIG_SECCOMP is not set
+CONFIG_MIPS_CMDLINE_DTB_EXTEND=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_OPROFILE=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_STACKPROTECTOR is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_MQ_IOSCHED_DEADLINE is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_ZSMALLOC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_JZ4780=y
+CONFIG_MTD_NAND_JZ4725B_BCH=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_ZRAM=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
+CONFIG_NETDEVICES=y
+# CONFIG_ETHERNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_ADC=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=2
+# CONFIG_DEVMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_INGENIC=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
+CONFIG_JZ4740_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_DRM=y
+CONFIG_DRM_FBDEV_OVERALLOC=300
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_INGENIC=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_PCM_TIMER is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_PROC_FS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_JZ4740_SOC_I2S=y
+CONFIG_SND_SOC_JZ4725B_CODEC=y
+CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
+CONFIG_SND_SIMPLE_CARD=y
+# CONFIG_HID is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_JZ4740=y
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_MMC=y
+# CONFIG_PWRSEQ_EMMC is not set
+# CONFIG_PWRSEQ_SIMPLE is not set
+CONFIG_MMC_JZ4740=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_SYSTOHC is not set
+# CONFIG_RTC_NVMEM is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4780=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+CONFIG_INGENIC_OST=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_MEMORY=y
+CONFIG_JZ4780_NEMC=y
+CONFIG_IIO=y
+CONFIG_INGENIC_ADC=y
+CONFIG_IIO_RESCALE=y
+CONFIG_PWM=y
+CONFIG_PWM_JZ4740=y
+# CONFIG_NVMEM is not set
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_ZSTD is not set
+# CONFIG_UBIFS_FS_XATTR is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_DIRECT=y
+CONFIG_SQUASHFS_DECOMP_MULTI=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_FONTS=y
+CONFIG_FONT_6x10=y
+# CONFIG_SYMBOLIC_ERRNAME is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+# CONFIG_DEBUG_MISC is not set
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_FTRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set

arch/mips/include/asm/Kbuild

@@ -5,6 +5,7 @@ generated-y += syscall_table_64_n32.h
 generated-y += syscall_table_64_n64.h
 generated-y += syscall_table_64_o32.h
 generic-y += export.h
+generic-y += kvm_para.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
 generic-y += parport.h

arch/mips/include/asm/bootinfo.h

@@ -65,12 +65,23 @@ enum loongson2ef_machine_type {
 /*
  * Valid machtype for group INGENIC
  */
-#define  MACH_INGENIC_JZ4730	0	/* JZ4730 SOC		*/
-#define  MACH_INGENIC_JZ4740	1	/* JZ4740 SOC		*/
-#define  MACH_INGENIC_JZ4770	2	/* JZ4770 SOC		*/
-#define  MACH_INGENIC_JZ4780	3	/* JZ4780 SOC		*/
-#define  MACH_INGENIC_X1000		4	/* X1000 SOC		*/
-#define  MACH_INGENIC_X1830		5	/* X1830 SOC		*/
+enum ingenic_machine_type {
+	MACH_INGENIC_UNKNOWN,
+	MACH_INGENIC_JZ4720,
+	MACH_INGENIC_JZ4725,
+	MACH_INGENIC_JZ4725B,
+	MACH_INGENIC_JZ4730,
+	MACH_INGENIC_JZ4740,
+	MACH_INGENIC_JZ4750,
+	MACH_INGENIC_JZ4755,
+	MACH_INGENIC_JZ4760,
+	MACH_INGENIC_JZ4770,
+	MACH_INGENIC_JZ4775,
+	MACH_INGENIC_JZ4780,
+	MACH_INGENIC_X1000,
+	MACH_INGENIC_X1830,
+	MACH_INGENIC_X2000,
+};
 
 extern char *system_type;
 const char *get_system_type(void);

arch/mips/include/asm/checksum.h

@@ -113,9 +113,9 @@ static inline __sum16 csum_fold(__wsum csum)
 	u32 sum = (__force u32)csum;
 
 	sum += (sum << 16);
-	csum = (sum < csum);
+	csum = (__force __wsum)(sum < (__force u32)csum);
 	sum >>= 16;
-	sum += csum;
+	sum += (__force u32)csum;
 
 	return (__force __sum16)~sum;
 }

arch/mips/include/asm/cpu-features.h

@@ -568,6 +568,14 @@
 # define cpu_has_mac2008_only	__opt(MIPS_CPU_MAC_2008_ONLY)
 #endif
 
+#ifndef cpu_has_ftlbparex
+# define cpu_has_ftlbparex	__opt(MIPS_CPU_FTLBPAREX)
+#endif
+
+#ifndef cpu_has_gsexcex
+# define cpu_has_gsexcex	__opt(MIPS_CPU_GSEXCEX)
+#endif
+
 #ifdef CONFIG_SMP
 /*
  * Some systems share FTLB RAMs between threads within a core (siblings in

arch/mips/include/asm/cpu.h

@@ -46,6 +46,7 @@
 #define PRID_COMP_NETLOGIC	0x0c0000
 #define PRID_COMP_CAVIUM	0x0d0000
 #define PRID_COMP_LOONGSON	0x140000
+#define PRID_COMP_INGENIC_13	0x130000	/* X2000 */
 #define PRID_COMP_INGENIC_D0	0xd00000	/* JZ4740, JZ4750, X1830 */
 #define PRID_COMP_INGENIC_D1	0xd10000	/* JZ4770, JZ4775, X1000 */
 #define PRID_COMP_INGENIC_E1	0xe10000	/* JZ4780 */
@@ -185,8 +186,9 @@
  * These are the PRID's for when 23:16 == PRID_COMP_INGENIC_*
  */
 
-#define PRID_IMP_XBURST_REV1	0x0200	/* XBurst with MXU SIMD ISA		*/
-#define PRID_IMP_XBURST_REV2	0x0100	/* XBurst with MXU2 SIMD ISA	*/
+#define PRID_IMP_XBURST_REV1	0x0200	/* XBurst®1 with MXU1.0/MXU1.1 SIMD ISA	*/
+#define PRID_IMP_XBURST_REV2	0x0100	/* XBurst®1 with MXU2.0 SIMD ISA		*/
+#define PRID_IMP_XBURST2		0x2000	/* XBurst®2 with MXU2.1 SIMD ISA		*/
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC
@@ -425,6 +427,8 @@ enum cpu_type_enum {
 #define MIPS_CPU_MM_SYSAD	BIT_ULL(58)	/* CPU supports write-through SysAD Valid merge */
 #define MIPS_CPU_MM_FULL	BIT_ULL(59)	/* CPU supports write-through full merge */
 #define MIPS_CPU_MAC_2008_ONLY	BIT_ULL(60)	/* CPU Only support MAC2008 Fused multiply-add instruction */
+#define MIPS_CPU_FTLBPAREX	BIT_ULL(61)	/* CPU has FTLB parity exception */
+#define MIPS_CPU_GSEXCEX	BIT_ULL(62)	/* CPU has GSExc exception */
 
 /*
  * CPU ASE encodings

arch/mips/include/asm/elf.h

@@ -410,6 +410,7 @@ do {									\
 	clear_thread_flag(TIF_32BIT_FPREGS);				\
 	clear_thread_flag(TIF_HYBRID_FPREGS);				\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
+	current->personality &= ~READ_IMPLIES_EXEC;			\
 									\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)			\
 		__SET_PERSONALITY32(ex, state);				\

arch/mips/include/asm/io.h

@@ -51,15 +51,13 @@
 
 /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
 
-#define IO_SPACE_LIMIT 0xffff
-
 /*
  * On MIPS I/O ports are memory mapped, so we access them using normal
  * load/store instructions. mips_io_port_base is the virtual address to
  * which all ports are being mapped.  For sake of efficiency some code
  * assumes that this is an address that can be loaded with a single lui
  * instruction, so the lower 16 bits must be zero.  Should be true on
- * on any sane architecture; generic code does not use this assumption.
+ * any sane architecture; generic code does not use this assumption.
  */
 extern unsigned long mips_io_port_base;
 

arch/mips/include/asm/kvm_para.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_MIPS_KVM_PARA_H
-#define _ASM_MIPS_KVM_PARA_H
-
-#include <uapi/asm/kvm_para.h>
-
-#define KVM_HYPERCALL ".word 0x42000028"
-
-/*
- * Hypercalls for KVM.
- *
- * Hypercall number is passed in v0.
- * Return value will be placed in v0.
- * Up to 3 arguments are passed in a0, a1, and a2.
- */
-static inline unsigned long kvm_hypercall0(unsigned long num)
-{
-	register unsigned long n asm("v0");
-	register unsigned long r asm("v0");
-
-	n = num;
-	__asm__ __volatile__(
-		KVM_HYPERCALL
-		: "=r" (r) : "r" (n) : "memory"
-		);
-
-	return r;
-}
-
-static inline unsigned long kvm_hypercall1(unsigned long num,
-					unsigned long arg0)
-{
-	register unsigned long n asm("v0");
-	register unsigned long r asm("v0");
-	register unsigned long a0 asm("a0");
-
-	n = num;
-	a0 = arg0;
-	__asm__ __volatile__(
-		KVM_HYPERCALL
-		: "=r" (r) : "r" (n), "r" (a0) : "memory"
-		);
-
-	return r;
-}
-
-static inline unsigned long kvm_hypercall2(unsigned long num,
-					unsigned long arg0, unsigned long arg1)
-{
-	register unsigned long n asm("v0");
-	register unsigned long r asm("v0");
-	register unsigned long a0 asm("a0");
-	register unsigned long a1 asm("a1");
-
-	n = num;
-	a0 = arg0;
-	a1 = arg1;
-	__asm__ __volatile__(
-		KVM_HYPERCALL
-		: "=r" (r) : "r" (n), "r" (a0), "r" (a1) : "memory"
-		);
-
-	return r;
-}
-
-static inline unsigned long kvm_hypercall3(unsigned long num,
-	unsigned long arg0, unsigned long arg1, unsigned long arg2)
-{
-	register unsigned long n asm("v0");
-	register unsigned long r asm("v0");
-	register unsigned long a0 asm("a0");
-	register unsigned long a1 asm("a1");
-	register unsigned long a2 asm("a2");
-
-	n = num;
-	a0 = arg0;
-	a1 = arg1;
-	a2 = arg2;
-	__asm__ __volatile__(
-		KVM_HYPERCALL
-		: "=r" (r) : "r" (n), "r" (a0), "r" (a1), "r" (a2) : "memory"
-		);
-
-	return r;
-}
-
-static inline bool kvm_check_and_clear_guest_paused(void)
-{
-	return false;
-}
-
-static inline unsigned int kvm_arch_para_features(void)
-{
-	return 0;
-}
-
-static inline unsigned int kvm_arch_para_hints(void)
-{
-	return 0;
-}
-
-#ifdef CONFIG_MIPS_PARAVIRT
-static inline bool kvm_para_available(void)
-{
-	return true;
-}
-#else
-static inline bool kvm_para_available(void)
-{
-	return false;
-}
-#endif
-
-
-#endif /* _ASM_MIPS_KVM_PARA_H */

arch/mips/include/asm/mach-cavium-octeon/mangle-port.h

@@ -48,11 +48,17 @@ static inline bool __should_swizzle_addr(u64 p)
 
 # define ioswabb(a, x)		(x)
 # define __mem_ioswabb(a, x)	(x)
-# define ioswabw(a, x)		(__should_swizzle_bits(a) ? le16_to_cpu(x) : x)
+# define ioswabw(a, x)		(__should_swizzle_bits(a) ?		\
+				 le16_to_cpu((__force __le16)(x)) :	\
+				 (x))
 # define __mem_ioswabw(a, x)	(x)
-# define ioswabl(a, x)		(__should_swizzle_bits(a) ? le32_to_cpu(x) : x)
+# define ioswabl(a, x)		(__should_swizzle_bits(a) ?		\
+				 le32_to_cpu((__force __le32)(x)) :	\
+				 (x))
 # define __mem_ioswabl(a, x)	(x)
-# define ioswabq(a, x)		(__should_swizzle_bits(a) ? le64_to_cpu(x) : x)
+# define ioswabq(a, x)		(__should_swizzle_bits(a) ?		\
+				 le64_to_cpu((__force __le64)(x)) :	\
+				 (x))
 # define __mem_ioswabq(a, x)	(x)
 
 #endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */

arch/mips/include/asm/mach-dec/cpu-feature-overrides.h

@@ -43,7 +43,6 @@
 #define cpu_has_dsp2			0
 #define cpu_has_mipsmt			0
 #define cpu_has_userlocal		0
-#define cpu_hwrena_impl_bits		0
 #define cpu_has_perf_cntr_intr_bit	0
 #define cpu_has_vz			0
 #define cpu_has_fre			0

arch/mips/include/asm/mach-generic/mangle-port.h

@@ -29,11 +29,11 @@
 
 # define ioswabb(a, x)		(x)
 # define __mem_ioswabb(a, x)	(x)
-# define ioswabw(a, x)		le16_to_cpu(x)
+# define ioswabw(a, x)		le16_to_cpu((__force __le16)(x))
 # define __mem_ioswabw(a, x)	(x)
-# define ioswabl(a, x)		le32_to_cpu(x)
+# define ioswabl(a, x)		le32_to_cpu((__force __le32)(x))
 # define __mem_ioswabl(a, x)	(x)
-# define ioswabq(a, x)		le64_to_cpu(x)
+# define ioswabq(a, x)		le64_to_cpu((__force __le64)(x))
 # define __mem_ioswabq(a, x)	(x)
 
 #else
@@ -41,11 +41,11 @@
 # define ioswabb(a, x)		(x)
 # define __mem_ioswabb(a, x)	(x)
 # define ioswabw(a, x)		(x)
-# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define __mem_ioswabw(a, x)	((__force u16)cpu_to_le16(x))
 # define ioswabl(a, x)		(x)
-# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define __mem_ioswabl(a, x)	((__force u32)cpu_to_le32(x))
 # define ioswabq(a, x)		(x)
-# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+# define __mem_ioswabq(a, x)	((__force u64)cpu_to_le64(x))
 
 #endif
 

arch/mips/include/asm/mach-generic/spaces.h

@@ -14,6 +14,10 @@
 
 #include <asm/mipsregs.h>
 
+#ifndef IO_SPACE_LIMIT
+#define IO_SPACE_LIMIT 0xffff
+#endif
+
 /*
  * This gives the physical RAM offset.
  */

arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h

@@ -25,8 +25,6 @@
 #define cpu_has_4kex			1
 #define cpu_has_3k_cache		0
 #define cpu_has_4k_cache		1
-#define cpu_has_6k_cache		0
-#define cpu_has_8k_cache		0
 #define cpu_has_tx39_cache		0
 #define cpu_has_fpu			1
 #define cpu_has_nofpuex			0
@@ -67,7 +65,6 @@
 #define cpu_has_mipsmt			0
 #define cpu_has_userlocal		0
 #define cpu_has_inclusive_pcaches	1
-#define cpu_hwrena_impl_bits		0
 #define cpu_has_perf_cntr_intr_bit	0
 #define cpu_has_vz			0
 #define cpu_has_fre			0

arch/mips/include/asm/mach-ip27/mangle-port.h

@@ -16,10 +16,10 @@
 # define ioswabb(a, x)		(x)
 # define __mem_ioswabb(a, x)	(x)
 # define ioswabw(a, x)		(x)
-# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define __mem_ioswabw(a, x)	((__force u16)cpu_to_le16(x))
 # define ioswabl(a, x)		(x)
-# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define __mem_ioswabl(a, x)	((__force u32)cpu_to_le32(x))
 # define ioswabq(a, x)		(x)
-# define __mem_ioswabq(a, x)	cpu_to_le64(x)
+# define __mem_ioswabq(a, x)	((__force u64)cpu_to_le64(x))
 
 #endif /* __ASM_MACH_IP27_MANGLE_PORT_H */

arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h

@@ -28,8 +28,6 @@
 #define cpu_has_4kex			1
 #define cpu_has_3k_cache		0
 #define cpu_has_4k_cache		1
-#define cpu_has_6k_cache		0
-#define cpu_has_8k_cache		0
 #define cpu_has_tx39_cache		0
 #define cpu_has_fpu			1
 #define cpu_has_nofpuex			0
@@ -69,7 +67,6 @@
 #define cpu_has_mipsmt			0
 #define cpu_has_userlocal		0
 #define cpu_has_inclusive_pcaches	1
-#define cpu_hwrena_impl_bits		0
 #define cpu_has_perf_cntr_intr_bit	0
 #define cpu_has_vz			0
 #define cpu_has_fre			0

arch/mips/include/asm/mach-ip30/mangle-port.h

@@ -13,10 +13,10 @@
 #define ioswabb(a, x)		(x)
 #define __mem_ioswabb(a, x)	(x)
 #define ioswabw(a, x)		(x)
-#define __mem_ioswabw(a, x)	cpu_to_le16(x)
+#define __mem_ioswabw(a, x)	((__force u16)cpu_to_le16(x))
 #define ioswabl(a, x)		(x)
-#define __mem_ioswabl(a, x)	cpu_to_le32(x)
+#define __mem_ioswabl(a, x)	((__force u32)cpu_to_le32(x))
 #define ioswabq(a, x)		(x)
-#define __mem_ioswabq(a, x)	cpu_to_le64(x)
+#define __mem_ioswabq(a, x)	((__force u64)cpu_to_le64(x))
 
 #endif /* __ASM_MACH_IP30_MANGLE_PORT_H */

arch/mips/include/asm/mach-ip32/mangle-port.h

@@ -17,10 +17,10 @@
 # define ioswabb(a, x)		(x)
 # define __mem_ioswabb(a, x)	(x)
 # define ioswabw(a, x)		(x)
-# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define __mem_ioswabw(a, x)	((__force u16)cpu_to_le16(x))
 # define ioswabl(a, x)		(x)
-# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define __mem_ioswabl(a, x)	((__force u32)cpu_to_le32(x))
 # define ioswabq(a, x)		(x)
-# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+# define __mem_ioswabq(a, x)	((__force u64)cpu_to_le64(x))
 
 #endif /* __ASM_MACH_IP32_MANGLE_PORT_H */

arch/mips/include/asm/mach-loongson64/boot_param.h

@@ -194,7 +194,8 @@ struct boot_params {
 
 enum loongson_bridge_type {
 	LS7A = 1,
-	RS780E = 2
+	RS780E = 2,
+	VIRTUAL = 3
 };
 
 struct loongson_system_configuration {
@@ -230,5 +231,6 @@ extern struct loongson_system_configuration loongson_sysconf;
 extern u32 node_id_offset;
 extern void ls7a_early_config(void);
 extern void rs780e_early_config(void);
+extern void virtual_early_config(void);
 
 #endif

arch/mips/include/asm/mach-loongson64/builtin_dtbs.h

@@ -8,6 +8,9 @@
 #ifndef __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
 #define __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
 
-extern u32 __dtb_loongson3_4core_rs780e_begin[];
-extern u32 __dtb_loongson3_8core_rs780e_begin[];
+extern u32 __dtb_loongson64c_4core_ls7a_begin[];
+extern u32 __dtb_loongson64c_4core_rs780e_begin[];
+extern u32 __dtb_loongson64c_8core_rs780e_begin[];
+extern u32 __dtb_loongson64g_4core_ls7a_begin[];
+extern u32 __dtb_loongson64v_4core_virtio_begin[];
 #endif

arch/mips/include/asm/mach-loongson64/irq.h

@@ -5,7 +5,11 @@
 #include <boot_param.h>
 
 /* cpu core interrupt numbers */
-#define MIPS_CPU_IRQ_BASE 56
+#define NR_IRQS_LEGACY		16
+#define NR_MIPS_CPU_IRQS	8
+#define NR_IRQS			(NR_IRQS_LEGACY + NR_MIPS_CPU_IRQS + 256)
+
+#define MIPS_CPU_IRQ_BASE 	NR_IRQS_LEGACY
 
 #include <asm/mach-generic/irq.h>
 

arch/mips/include/asm/mach-loongson64/spaces.h

@@ -11,8 +11,7 @@
 #define PCI_IOSIZE	SZ_16M
 #define MAP_BASE	(PCI_IOBASE + PCI_IOSIZE)
 
-/* Reserved at the start of PCI_IOBASE for legacy drivers */
-#define MMIO_LOWER_RESERVED	0x10000
+#define IO_SPACE_LIMIT  (PCI_IOSIZE - 1)
 
 #include <asm/mach-generic/spaces.h>
 #endif

arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h

@@ -29,7 +29,6 @@
 #define cpu_has_octeon_cache	1
 #define cpu_has_4k_cache	0
 #else
-#define cpu_has_octeon_cache	0
 #define cpu_has_4k_cache	1
 #endif
 

arch/mips/include/asm/mach-tx39xx/mangle-port.h

@@ -14,11 +14,11 @@ extern unsigned long (*__swizzle_addr_b)(unsigned long port);
 
 #define ioswabb(a, x)		(x)
 #define __mem_ioswabb(a, x)	(x)
-#define ioswabw(a, x)		le16_to_cpu(x)
+#define ioswabw(a, x)		le16_to_cpu((__force __le16)(x))
 #define __mem_ioswabw(a, x)	(x)
-#define ioswabl(a, x)		le32_to_cpu(x)
+#define ioswabl(a, x)		le32_to_cpu((__force __le32)(x))
 #define __mem_ioswabl(a, x)	(x)
-#define ioswabq(a, x)		le64_to_cpu(x)
+#define ioswabq(a, x)		le64_to_cpu((__force __le64)(x))
 #define __mem_ioswabq(a, x)	(x)
 
 #endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */

arch/mips/include/asm/mach-tx49xx/mangle-port.h

@@ -16,12 +16,12 @@
 extern u16 (*ioswabw)(volatile u16 *a, u16 x);
 extern u16 (*__mem_ioswabw)(volatile u16 *a, u16 x);
 #else
-#define ioswabw(a, x)		le16_to_cpu(x)
+#define ioswabw(a, x)		le16_to_cpu((__force __le16)(x))
 #define __mem_ioswabw(a, x)	(x)
 #endif
-#define ioswabl(a, x)		le32_to_cpu(x)
+#define ioswabl(a, x)		le32_to_cpu((__force __le32)(x))
 #define __mem_ioswabl(a, x)	(x)
-#define ioswabq(a, x)		le64_to_cpu(x)
+#define ioswabq(a, x)		le64_to_cpu((__force __le64)(x))
 #define __mem_ioswabq(a, x)	(x)
 
 #endif /* __ASM_MACH_TX49XX_MANGLE_PORT_H */

arch/mips/include/asm/mips_machine.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- */
-
-#ifndef __ASM_MIPS_MACHINE_H
-#define __ASM_MIPS_MACHINE_H
-
-#include <linux/init.h>
-#include <linux/stddef.h>
-
-#include <asm/bootinfo.h>
-
-struct mips_machine {
-	unsigned long		mach_type;
-	const char		*mach_id;
-	const char		*mach_name;
-	void			(*mach_setup)(void);
-};
-
-#define MIPS_MACHINE(_type, _id, _name, _setup)			\
-static const char machine_name_##_type[] __initconst		\
-			__aligned(1) = _name;			\
-static const char machine_id_##_type[] __initconst		\
-			__aligned(1) = _id;			\
-static struct mips_machine machine_##_type			\
-		__used __section(.mips.machines.init) =		\
-{								\
-	.mach_type	= _type,				\
-	.mach_id	= machine_id_##_type,			\
-	.mach_name	= machine_name_##_type,			\
-	.mach_setup	= _setup,				\
-};
-
-extern long __mips_machines_start;
-extern long __mips_machines_end;
-
-#ifdef CONFIG_MIPS_MACHINE
-int  mips_machtype_setup(char *id) __init;
-void mips_machine_setup(void) __init;
-#else
-static inline int mips_machtype_setup(char *id) { return 1; }
-static inline void mips_machine_setup(void) { }
-#endif /* CONFIG_MIPS_MACHINE */
-
-#endif /* __ASM_MIPS_MACHINE_H */

arch/mips/include/asm/mipsregs.h

@@ -86,6 +86,7 @@
 #define CP0_XCONTEXT $20
 #define CP0_FRAMEMASK $21
 #define CP0_DIAGNOSTIC $22
+#define CP0_DIAGNOSTIC1 $22, 1
 #define CP0_DEBUG $23
 #define CP0_DEPC $24
 #define CP0_PERFORMANCE $25
@@ -473,6 +474,9 @@
 /* Implementation specific trap codes used by MIPS cores */
 #define MIPS_EXCCODE_TLBPAR	16	/* TLB parity error exception */
 
+/* Implementation specific trap codes used by Loongson cores */
+#define LOONGSON_EXCCODE_GSEXC	16	/* Loongson-specific exception */
+
 /*
  * Bits in the coprocessor 0 config register.
  */
@@ -689,35 +693,35 @@
 /* Config6 feature bits for proAptiv/P5600 */
 
 /* Jump register cache prediction disable */
-#define MIPS_CONF6_MTI_JRCD		(_ULCAST_(1) << 0)
+#define MTI_CONF6_JRCD		(_ULCAST_(1) << 0)
 /* MIPSr6 extensions enable */
-#define MIPS_CONF6_MTI_R6		(_ULCAST_(1) << 2)
+#define MTI_CONF6_R6		(_ULCAST_(1) << 2)
 /* IFU Performance Control */
-#define MIPS_CONF6_MTI_IFUPERFCTL	(_ULCAST_(3) << 10)
-#define MIPS_CONF6_MTI_SYND		(_ULCAST_(1) << 13)
+#define MTI_CONF6_IFUPERFCTL	(_ULCAST_(3) << 10)
+#define MTI_CONF6_SYND		(_ULCAST_(1) << 13)
 /* Sleep state performance counter disable */
-#define MIPS_CONF6_MTI_SPCD		(_ULCAST_(1) << 14)
+#define MTI_CONF6_SPCD		(_ULCAST_(1) << 14)
 /* proAptiv FTLB on/off bit */
-#define MIPS_CONF6_MTI_FTLBEN		(_ULCAST_(1) << 15)
+#define MTI_CONF6_FTLBEN	(_ULCAST_(1) << 15)
 /* Disable load/store bonding */
-#define MIPS_CONF6_MTI_DLSB		(_ULCAST_(1) << 21)
+#define MTI_CONF6_DLSB		(_ULCAST_(1) << 21)
 /* FTLB probability bits */
-#define MIPS_CONF6_MTI_FTLBP_SHIFT	(16)
+#define MTI_CONF6_FTLBP_SHIFT	(16)
 
 /* Config6 feature bits for Loongson-3 */
 
 /* Loongson-3 internal timer bit */
-#define MIPS_CONF6_LOONGSON_INTIMER	(_ULCAST_(1) << 6)
+#define LOONGSON_CONF6_INTIMER	(_ULCAST_(1) << 6)
 /* Loongson-3 external timer bit */
-#define MIPS_CONF6_LOONGSON_EXTIMER	(_ULCAST_(1) << 7)
+#define LOONGSON_CONF6_EXTIMER	(_ULCAST_(1) << 7)
 /* Loongson-3 SFB on/off bit, STFill in manual */
-#define MIPS_CONF6_LOONGSON_SFBEN	(_ULCAST_(1) << 8)
+#define LOONGSON_CONF6_SFBEN	(_ULCAST_(1) << 8)
 /* Loongson-3's LL on exclusive cacheline */
-#define MIPS_CONF6_LOONGSON_LLEXC	(_ULCAST_(1) << 16)
+#define LOONGSON_CONF6_LLEXC	(_ULCAST_(1) << 16)
 /* Loongson-3's SC has a random delay */
-#define MIPS_CONF6_LOONGSON_SCRAND	(_ULCAST_(1) << 17)
+#define LOONGSON_CONF6_SCRAND	(_ULCAST_(1) << 17)
 /* Loongson-3 FTLB on/off bit, VTLBOnly in manual */
-#define MIPS_CONF6_LOONGSON_FTLBDIS	(_ULCAST_(1) << 22)
+#define LOONGSON_CONF6_FTLBDIS	(_ULCAST_(1) << 22)
 
 #define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
 
@@ -1051,6 +1055,13 @@
 /* Flush FTLB */
 #define LOONGSON_DIAG_FTLB	(_ULCAST_(1) << 13)
 
+/*
+ * Diag1 (GSCause in Loongson-speak) fields
+ */
+/* Loongson-specific exception code (GSExcCode) */
+#define LOONGSON_DIAG1_EXCCODE_SHIFT	2
+#define LOONGSON_DIAG1_EXCCODE		GENMASK(6, 2)
+
 /* CvmCtl register field definitions */
 #define CVMCTL_IPPCI_SHIFT	7
 #define CVMCTL_IPPCI		(_U64CAST_(0x7) << CVMCTL_IPPCI_SHIFT)

arch/mips/include/asm/octeon/cvmx-l2c.h

@@ -327,7 +327,7 @@ void cvmx_l2c_flush(void);
 
 /**
  *
- * Returns Returns the size of the L2 cache in bytes,
+ * Returns the size of the L2 cache in bytes,
  * -1 on error (unrecognized model)
  */
 int cvmx_l2c_get_cache_size_bytes(void);

arch/mips/include/asm/octeon/cvmx-pip.h

@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
  *	    offsetof() to determine the offsets into packet headers.
  *	    For example, offsetof(ethhdr, protocol) returns the offset
  *	    of the ethernet protocol field.  The bitmask selects which
- *	    bytes to include the the tag, with bit offset X selecting
+ *	    bytes to include the tag, with bit offset X selecting
  *	    byte at offset X from the beginning of the packet data.
  * @len:    Number of bytes to include. Usually this is the sizeof()
  *	    the field.

arch/mips/include/asm/octeon/cvmx-pko.h

@@ -40,8 +40,7 @@
  * generic code while CVMX_PKO_LOCK_CMD_QUEUE should be used
  * with hand tuned fast path code.
  *
- * Some of other SDK differences visible to the command command
- * queuing:
+ * Some of other SDK differences visible to the command queuing:
  * - PKO indexes are no longer stored in the FAU. A large
  *   percentage of the FAU register block used to be tied up
  *   maintaining PKO queue pointers. These are now stored in a
@@ -413,7 +412,7 @@ static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue,
  * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
  *		 CVMX_PKO_LOCK_CMD_QUEUE
  *
- * Returns returns CVMX_PKO_SUCCESS on success, or error code on
+ * Returns: CVMX_PKO_SUCCESS on success, or error code on
  * failure of output
  */
 static inline cvmx_pko_status_t cvmx_pko_send_packet_finish(
@@ -456,7 +455,7 @@ static inline cvmx_pko_status_t cvmx_pko_send_packet_finish(
  * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
  *		 CVMX_PKO_LOCK_CMD_QUEUE
  *
- * Returns returns CVMX_PKO_SUCCESS on success, or error code on
+ * Returns: CVMX_PKO_SUCCESS on success, or error code on
  * failure of output
  */
 static inline cvmx_pko_status_t cvmx_pko_send_packet_finish3(

arch/mips/include/asm/octeon/cvmx-pow.h

@@ -1345,7 +1345,7 @@ static inline void cvmx_pow_tag_sw_wait(void)
  * @wait:   When set, call stalls until work becomes avaiable, or times out.
  *		 If not set, returns immediately.
  *
- * Returns Returns the WQE pointer from POW. Returns NULL if no work
+ * Returns: the WQE pointer from POW. Returns NULL if no work
  * was available.
  */
 static inline struct cvmx_wqe *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_t
@@ -1379,7 +1379,7 @@ static inline struct cvmx_wqe *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_
  * @wait:   When set, call stalls until work becomes avaiable, or times out.
  *		 If not set, returns immediately.
  *
- * Returns Returns the WQE pointer from POW. Returns NULL if no work
+ * Returns: the WQE pointer from POW. Returns NULL if no work
  * was available.
  */
 static inline struct cvmx_wqe *cvmx_pow_work_request_sync(cvmx_pow_wait_t wait)
@@ -1398,7 +1398,7 @@ static inline struct cvmx_wqe *cvmx_pow_work_request_sync(cvmx_pow_wait_t wait)
  * This function waits for any previous tag switch to complete before
  * requesting the null_rd.
  *
- * Returns Returns the POW state of type cvmx_pow_tag_type_t.
+ * Returns: the POW state of type cvmx_pow_tag_type_t.
  */
 static inline enum cvmx_pow_tag_type cvmx_pow_work_request_null_rd(void)
 {
@@ -1482,7 +1482,7 @@ static inline void cvmx_pow_work_request_async(int scr_addr,
  * @scr_addr: Scratch memory address to get result from Byte address,
  *	      must be 8 byte aligned.
  *
- * Returns Returns the WQE from the scratch register, or NULL if no
+ * Returns: the WQE from the scratch register, or NULL if no
  * work was available.
  */
 static inline struct cvmx_wqe *cvmx_pow_work_response_async(int scr_addr)

arch/mips/include/asm/octeon/octeon.h

@@ -198,7 +198,7 @@ union octeon_cvmemctl {
 		 * CvmMemCtl[DIDTTO] */
 		__BITFIELD_FIELD(uint64_t didtto2:1,
 		/* R/W If set, marked write-buffer entries time out
-		 * the same as as other entries; if clear, marked
+		 * the same as other entries; if clear, marked
 		 * write-buffer entries use the maximum timeout. */
 		__BITFIELD_FIELD(uint64_t dismarkwblongto:1,
 		/* R/W If set, a merged store does not clear the

arch/mips/include/asm/war.h

@@ -121,7 +121,7 @@
  * operate correctly if the internal data cache refill buffer is empty.	 These
  * CACHE instructions should be separated from any potential data cache miss
  * by a load instruction to an uncached address to empty the response buffer."
- * (Revision 2.0 device errata from IDT available on http://www.idt.com/
+ * (Revision 2.0 device errata from IDT available on https://www.idt.com/
  * in .pdf format.)
  */
 #ifndef R4600_V2_HIT_CACHEOP_WAR

arch/mips/include/uapi/asm/Kbuild

@@ -5,3 +5,5 @@ generated-y += unistd_o32.h
 generated-y += unistd_nr_n32.h
 generated-y += unistd_nr_n64.h
 generated-y += unistd_nr_o32.h
+
+generic-y += kvm_para.h

arch/mips/include/uapi/asm/kvm_para.h

-#ifndef _UAPI_ASM_MIPS_KVM_PARA_H
-#define _UAPI_ASM_MIPS_KVM_PARA_H
-
-
-#endif /* _UAPI_ASM_MIPS_KVM_PARA_H */

arch/mips/jz4740/Kconfig

@@ -15,6 +15,10 @@ config JZ4740_QI_LB60
 	bool "Qi Hardware Ben NanoNote"
 	select MACH_JZ4740
 
+config JZ4740_RS90
+	bool "YLM RetroMini (RS-90)"
+	select MACH_JZ4725B
+
 config JZ4770_GCW0
 	bool "Game Consoles Worldwide GCW Zero"
 	select MACH_JZ4770
@@ -27,8 +31,16 @@ config X1000_CU1000_NEO
 	bool "YSH & ATIL CU1000 Module with Neo backplane"
 	select MACH_X1000
 
+config X1830_CU1830_NEO
+	bool "YSH & ATIL CU1830 Module with Neo backplane"
+	select MACH_X1830
+
 endchoice
 
+config MACH_JZ4725B
+	bool
+	select SYS_HAS_CPU_MIPS32_R1
+
 config MACH_JZ4740
 	bool
 	select SYS_HAS_CPU_MIPS32_R1
@@ -50,3 +62,9 @@ config MACH_X1000
 	select MIPS_CPU_SCACHE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_HIGHMEM
+
+config MACH_X1830
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_HIGHMEM

arch/mips/jz4740/setup.c

@@ -14,6 +14,7 @@
 #include <linux/of_clk.h>
 #include <linux/of_fdt.h>
 #include <linux/pm.h>
+#include <linux/sizes.h>
 #include <linux/suspend.h>
 
 #include <asm/bootinfo.h>
@@ -22,33 +23,10 @@
 #include <asm/reboot.h>
 #include <asm/time.h>
 
-#define JZ4740_EMC_BASE_ADDR 0x13010000
-
-#define JZ4740_EMC_SDRAM_CTRL 0x80
-
-static void __init jz4740_detect_mem(void)
-{
-	void __iomem *jz_emc_base;
-	u32 ctrl, bus, bank, rows, cols;
-	phys_addr_t size;
-
-	jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100);
-	ctrl = readl(jz_emc_base + JZ4740_EMC_SDRAM_CTRL);
-	bus = 2 - ((ctrl >> 31) & 1);
-	bank = 1 + ((ctrl >> 19) & 1);
-	cols = 8 + ((ctrl >> 26) & 7);
-	rows = 11 + ((ctrl >> 20) & 3);
-	printk(KERN_DEBUG
-		"SDRAM preconfigured: bus:%u bank:%u rows:%u cols:%u\n",
-		bus, bank, rows, cols);
-	iounmap(jz_emc_base);
-
-	size = 1 << (bus + bank + cols + rows);
-	add_memory_region(0, size, BOOT_MEM_RAM);
-}
-
 static unsigned long __init get_board_mach_type(const void *fdt)
 {
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,x2000"))
+		return MACH_INGENIC_X2000;
 	if (!fdt_node_check_compatible(fdt, 0, "ingenic,x1830"))
 		return MACH_INGENIC_X1830;
 	if (!fdt_node_check_compatible(fdt, 0, "ingenic,x1000"))
@@ -57,25 +35,25 @@ static unsigned long __init get_board_mach_type(const void *fdt)
 		return MACH_INGENIC_JZ4780;
 	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
 		return MACH_INGENIC_JZ4770;
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4725b"))
+		return MACH_INGENIC_JZ4725B;
 
 	return MACH_INGENIC_JZ4740;
 }
 
 void __init plat_mem_setup(void)
 {
-	int offset;
-	void *dtb;
-
-	if (__dtb_start != __dtb_end)
-		dtb = __dtb_start;
-	else
-		dtb = (void *)fw_passed_dtb;
+	void *dtb = (void *)fw_passed_dtb;
 
 	__dt_setup_arch(dtb);
 
-	offset = fdt_path_offset(dtb, "/memory");
-	if (offset < 0)
-		jz4740_detect_mem();
+	/*
+	 * Old devicetree files for the qi,lb60 board did not have a /memory
+	 * node. Hardcode the memory info here.
+	 */
+	if (!fdt_node_check_compatible(dtb, 0, "qi,lb60") &&
+	    fdt_path_offset(dtb, "/memory") < 0)
+		early_init_dt_add_memory_arch(0, SZ_32M);
 
 	mips_machtype = get_board_mach_type(dtb);
 }
@@ -91,6 +69,8 @@ void __init device_tree_init(void)
 const char *get_system_type(void)
 {
 	switch (mips_machtype) {
+	case MACH_INGENIC_X2000:
+		return "X2000";
 	case MACH_INGENIC_X1830:
 		return "X1830";
 	case MACH_INGENIC_X1000:
@@ -99,6 +79,8 @@ const char *get_system_type(void)
 		return "JZ4780";
 	case MACH_INGENIC_JZ4770:
 		return "JZ4770";
+	case MACH_INGENIC_JZ4725B:
+		return "JZ4725B";
 	default:
 		return "JZ4740";
 	}

arch/mips/kernel/Makefile

@@ -93,7 +93,6 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_EARLY_PRINTK_8250)	+= early_printk_8250.o
 obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
-obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
 obj-$(CONFIG_MIPSR2_TO_R6_EMULATOR)	+= mips-r2-to-r6-emul.o
 
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)

arch/mips/kernel/cpu-probe.c

@@ -635,14 +635,14 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
 		config = read_c0_config6();
 
 		if (flags & FTLB_EN)
-			config |= MIPS_CONF6_MTI_FTLBEN;
+			config |= MTI_CONF6_FTLBEN;
 		else
-			config &= ~MIPS_CONF6_MTI_FTLBEN;
+			config &= ~MTI_CONF6_FTLBEN;
 
 		if (flags & FTLB_SET_PROB) {
-			config &= ~(3 << MIPS_CONF6_MTI_FTLBP_SHIFT);
+			config &= ~(3 << MTI_CONF6_FTLBP_SHIFT);
 			config |= calculate_ftlb_probability(c)
-				  << MIPS_CONF6_MTI_FTLBP_SHIFT;
+				  << MTI_CONF6_FTLBP_SHIFT;
 		}
 
 		write_c0_config6(config);
@@ -662,10 +662,10 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
 		config = read_c0_config6();
 		if (flags & FTLB_EN)
 			/* Enable FTLB */
-			write_c0_config6(config & ~MIPS_CONF6_LOONGSON_FTLBDIS);
+			write_c0_config6(config & ~LOONGSON_CONF6_FTLBDIS);
 		else
 			/* Disable FTLB */
-			write_c0_config6(config | MIPS_CONF6_LOONGSON_FTLBDIS);
+			write_c0_config6(config | LOONGSON_CONF6_FTLBDIS);
 		break;
 	default:
 		return 1;
@@ -1827,6 +1827,19 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 	default:
 		break;
 	}
+
+	/* Recent MIPS cores use the implementation-dependent ExcCode 16 for
+	 * cache/FTLB parity exceptions.
+	 */
+	switch (__get_cpu_type(c->cputype)) {
+	case CPU_PROAPTIV:
+	case CPU_P5600:
+	case CPU_P6600:
+	case CPU_I6400:
+	case CPU_I6500:
+		c->options |= MIPS_CPU_FTLBPAREX;
+		break;
+	}
 }
 
 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
@@ -2030,6 +2043,9 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
 
+	/* All Loongson processors covered here define ExcCode 16 as GSExc. */
+	c->options |= MIPS_CPU_GSEXCEX;
+
 	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */
 		switch (c->processor_id & PRID_REV_MASK) {
@@ -2110,6 +2126,8 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 	BUG_ON(!__builtin_constant_p(cpu_has_counter) || cpu_has_counter);
 
 	switch (c->processor_id & PRID_IMP_MASK) {
+
+	/* XBurst®1 with MXU1.0/MXU1.1 SIMD ISA */
 	case PRID_IMP_XBURST_REV1:
 
 		/*
@@ -2148,12 +2166,20 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 			break;
 		}
 		fallthrough;
+
+	/* XBurst®1 with MXU2.0 SIMD ISA */
 	case PRID_IMP_XBURST_REV2:
 		c->cputype = CPU_XBURST;
 		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		__cpu_name[cpu] = "Ingenic XBurst";
 		break;
 
+	/* XBurst®2 with MXU2.1 SIMD ISA */
+	case PRID_IMP_XBURST2:
+		c->cputype = CPU_XBURST;
+		__cpu_name[cpu] = "Ingenic XBurst II";
+		break;
+
 	default:
 		panic("Unknown Ingenic Processor ID!");
 		break;
@@ -2299,6 +2325,7 @@ void cpu_probe(void)
 	case PRID_COMP_LOONGSON:
 		cpu_probe_loongson(c, cpu);
 		break;
+	case PRID_COMP_INGENIC_13:
 	case PRID_COMP_INGENIC_D0:
 	case PRID_COMP_INGENIC_D1:
 	case PRID_COMP_INGENIC_E1:

arch/mips/kernel/genex.S

@@ -498,6 +498,19 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	KMODE
 	.endm
 
+	.macro __build_clear_gsexc
+	.set	push
+	/*
+	 * We need to specify a selector to access the CP0.Diag1 (GSCause)
+	 * register. All GSExc-equipped processors have MIPS32.
+	 */
+	.set	mips32
+	mfc0	a1, CP0_DIAGNOSTIC1
+	.set	pop
+	TRACE_IRQS_ON
+	STI
+	.endm
+
 	.macro	__BUILD_silent exception
 	.endm
 
@@ -556,6 +569,7 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	BUILD_HANDLER fpe fpe fpe silent		/* #15 */
 #endif
 	BUILD_HANDLER ftlb ftlb none silent		/* #16 */
+	BUILD_HANDLER gsexc gsexc gsexc silent		/* #16 */
 	BUILD_HANDLER msa msa sti silent		/* #21 */
 	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
 #ifdef	CONFIG_HARDWARE_WATCHPOINTS

arch/mips/kernel/head.S

@@ -111,6 +111,12 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	move		t2, a1
 	beq		a0, t1, dtb_found
 
+#ifdef CONFIG_BUILTIN_DTB
+	PTR_LA	t2, __dtb_start
+	PTR_LA	t1, __dtb_end
+	bne		t1, t2, dtb_found
+#endif /* CONFIG_BUILTIN_DTB */
+
 	li		t2, 0
 dtb_found:
 #endif /* CONFIG_USE_OF */

arch/mips/kernel/mips_machine.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- */
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/mips_machine.h>
-#include <asm/prom.h>
-
-static struct mips_machine *mips_machine __initdata;
-
-#define for_each_machine(mach) \
-	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
-	     (mach) && \
-	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
-	     (mach)++)
-
-__init int mips_machtype_setup(char *id)
-{
-	struct mips_machine *mach;
-
-	for_each_machine(mach) {
-		if (mach->mach_id == NULL)
-			continue;
-
-		if (strcmp(mach->mach_id, id) == 0) {
-			mips_machtype = mach->mach_type;
-			return 0;
-		}
-	}
-
-	pr_err("MIPS: no machine found for id '%s', supported machines:\n", id);
-	pr_err("%-24s %s\n", "id", "name");
-	for_each_machine(mach)
-		pr_err("%-24s %s\n", mach->mach_id, mach->mach_name);
-
-	return 1;
-}
-
-__setup("machtype=", mips_machtype_setup);
-
-__init void mips_machine_setup(void)
-{
-	struct mips_machine *mach;
-
-	for_each_machine(mach) {
-		if (mips_machtype == mach->mach_type) {
-			mips_machine = mach;
-			break;
-		}
-	}
-
-	if (!mips_machine)
-		return;
-
-	mips_set_machine_name(mips_machine->mach_name);
-
-	if (mips_machine->mach_setup)
-		mips_machine->mach_setup();
-}

arch/mips/kernel/setup.c

@@ -497,7 +497,7 @@ static void __init mips_parse_crashkernel(void)
 	if (ret != 0 || crash_size <= 0)
 		return;
 
-	if (!memblock_find_in_range(crash_base, crash_base + crash_size, crash_size, 0)) {
+	if (!memblock_find_in_range(crash_base, crash_base + crash_size, crash_size, 1)) {
 		pr_warn("Invalid memory region reserved for crash kernel\n");
 		return;
 	}

arch/mips/kernel/topology.c

@@ -20,7 +20,7 @@ static int __init topology_init(void)
 	for_each_present_cpu(i) {
 		struct cpu *c = &per_cpu(cpu_devices, i);
 
-		c->hotpluggable = 1;
+		c->hotpluggable = !!i;
 		ret = register_cpu(c, i);
 		if (ret)
 			printk(KERN_WARNING "topology_init: register_cpu %d "

arch/mips/kernel/traps.c

@@ -90,6 +90,7 @@ extern asmlinkage void handle_tr(void);
 extern asmlinkage void handle_msa_fpe(void);
 extern asmlinkage void handle_fpe(void);
 extern asmlinkage void handle_ftlb(void);
+extern asmlinkage void handle_gsexc(void);
 extern asmlinkage void handle_msa(void);
 extern asmlinkage void handle_mdmx(void);
 extern asmlinkage void handle_watch(void);
@@ -1680,7 +1681,7 @@ __setup("nol2par", nol2parity);
  * Some MIPS CPUs can enable/disable for cache parity detection, but do
  * it different ways.
  */
-static inline void parity_protection_init(void)
+static inline __init void parity_protection_init(void)
 {
 #define ERRCTL_PE	0x80000000
 #define ERRCTL_L2P	0x00800000
@@ -1902,6 +1903,37 @@ asmlinkage void do_ftlb(void)
 	cache_parity_error();
 }
 
+asmlinkage void do_gsexc(struct pt_regs *regs, u32 diag1)
+{
+	u32 exccode = (diag1 & LOONGSON_DIAG1_EXCCODE) >>
+			LOONGSON_DIAG1_EXCCODE_SHIFT;
+	enum ctx_state prev_state;
+
+	prev_state = exception_enter();
+
+	switch (exccode) {
+	case 0x08:
+		/* Undocumented exception, will trigger on certain
+		 * also-undocumented instructions accessible from userspace.
+		 * Processor state is not otherwise corrupted, but currently
+		 * we don't know how to proceed. Maybe there is some
+		 * undocumented control flag to enable the instructions?
+		 */
+		force_sig(SIGILL);
+		break;
+
+	default:
+		/* None of the other exceptions, documented or not, have
+		 * further details given; none are encountered in the wild
+		 * either. Panic in case some of them turn out to be fatal.
+		 */
+		show_regs(regs);
+		panic("Unhandled Loongson exception - GSCause = %08x", diag1);
+	}
+
+	exception_exit(prev_state);
+}
+
 /*
  * SDBBP EJTAG debug exception handler.
  * We skip the instruction and return to the next instruction.
@@ -2457,7 +2489,11 @@ void __init trap_init(void)
 	if (cpu_has_fpu && !cpu_has_nofpuex)
 		set_except_vector(EXCCODE_FPE, handle_fpe);
 
-	set_except_vector(MIPS_EXCCODE_TLBPAR, handle_ftlb);
+	if (cpu_has_ftlbparex)
+		set_except_vector(MIPS_EXCCODE_TLBPAR, handle_ftlb);
+
+	if (cpu_has_gsexcex)
+		set_except_vector(LOONGSON_EXCCODE_GSEXC, handle_gsexc);
 
 	if (cpu_has_rixiex) {
 		set_except_vector(EXCCODE_TLBRI, tlb_do_page_fault_0);

arch/mips/kvm/vz.c

@@ -129,7 +129,7 @@ static inline unsigned int kvm_vz_config5_guest_wrmask(struct kvm_vcpu *vcpu)
 
 static inline unsigned int kvm_vz_config6_guest_wrmask(struct kvm_vcpu *vcpu)
 {
-	return MIPS_CONF6_LOONGSON_INTIMER | MIPS_CONF6_LOONGSON_EXTIMER;
+	return LOONGSON_CONF6_INTIMER | LOONGSON_CONF6_EXTIMER;
 }
 
 /*
@@ -189,7 +189,7 @@ static inline unsigned int kvm_vz_config5_user_wrmask(struct kvm_vcpu *vcpu)
 static inline unsigned int kvm_vz_config6_user_wrmask(struct kvm_vcpu *vcpu)
 {
 	return kvm_vz_config6_guest_wrmask(vcpu) |
-		MIPS_CONF6_LOONGSON_SFBEN | MIPS_CONF6_LOONGSON_FTLBDIS;
+		LOONGSON_CONF6_SFBEN | LOONGSON_CONF6_FTLBDIS;
 }
 
 static gpa_t kvm_vz_gva_to_gpa_cb(gva_t gva)

arch/mips/loongson2ef/Platform

@@ -8,6 +8,28 @@ cflags-$(CONFIG_CPU_LOONGSON2E) += \
 	$(call cc-option,-march=loongson2e,-march=r4600)
 cflags-$(CONFIG_CPU_LOONGSON2F) += \
 	$(call cc-option,-march=loongson2f,-march=r4600)
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON2EF)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
+
 # Enable the workarounds for Loongson2f
 ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
   ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)

arch/mips/loongson64/cpucfg-emul.c

@@ -57,11 +57,11 @@ static void decode_loongson_config6(struct cpuinfo_mips *c)
 {
 	u32 config6 = read_c0_config6();
 
-	if (config6 & MIPS_CONF6_LOONGSON_SFBEN)
+	if (config6 & LOONGSON_CONF6_SFBEN)
 		c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_SFBP;
-	if (config6 & MIPS_CONF6_LOONGSON_LLEXC)
+	if (config6 & LOONGSON_CONF6_LLEXC)
 		c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_LLEXC;
-	if (config6 & MIPS_CONF6_LOONGSON_SCRAND)
+	if (config6 & LOONGSON_CONF6_SCRAND)
 		c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_SCRAND;
 }
 

arch/mips/loongson64/env.c

@@ -126,28 +126,6 @@ void __init prom_init_env(void)
 		loongson_sysconf.cores_per_node - 1) /
 		loongson_sysconf.cores_per_node;
 
-	if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C) {
-		switch (read_c0_prid() & PRID_REV_MASK) {
-		case PRID_REV_LOONGSON3A_R1:
-		case PRID_REV_LOONGSON3A_R2_0:
-		case PRID_REV_LOONGSON3A_R2_1:
-		case PRID_REV_LOONGSON3A_R3_0:
-		case PRID_REV_LOONGSON3A_R3_1:
-			loongson_fdt_blob = __dtb_loongson3_4core_rs780e_begin;
-			break;
-		case PRID_REV_LOONGSON3B_R1:
-		case PRID_REV_LOONGSON3B_R2:
-			loongson_fdt_blob = __dtb_loongson3_8core_rs780e_begin;
-			break;
-		default:
-			break;
-		}
-	}
-
-
-	if (!loongson_fdt_blob)
-		pr_err("Failed to determine built-in Loongson64 dtb\n");
-
 	loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
 	loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
 	loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;
@@ -189,13 +167,57 @@ void __init prom_init_env(void)
 	vendor = id & 0xffff;
 	device = (id >> 16) & 0xffff;
 
-	if (vendor == PCI_VENDOR_ID_LOONGSON && device == 0x7a00) {
+	switch (vendor) {
+	case PCI_VENDOR_ID_LOONGSON:
 		pr_info("The bridge chip is LS7A\n");
 		loongson_sysconf.bridgetype = LS7A;
 		loongson_sysconf.early_config = ls7a_early_config;
-	} else {
+		break;
+	case PCI_VENDOR_ID_AMD:
+	case PCI_VENDOR_ID_ATI:
 		pr_info("The bridge chip is RS780E or SR5690\n");
 		loongson_sysconf.bridgetype = RS780E;
 		loongson_sysconf.early_config = rs780e_early_config;
+		break;
+	default:
+		pr_info("The bridge chip is VIRTUAL\n");
+		loongson_sysconf.bridgetype = VIRTUAL;
+		loongson_sysconf.early_config = virtual_early_config;
+		loongson_fdt_blob = __dtb_loongson64v_4core_virtio_begin;
+		break;
 	}
+
+	if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C) {
+		switch (read_c0_prid() & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON3A_R1:
+		case PRID_REV_LOONGSON3A_R2_0:
+		case PRID_REV_LOONGSON3A_R2_1:
+		case PRID_REV_LOONGSON3A_R3_0:
+		case PRID_REV_LOONGSON3A_R3_1:
+			switch (loongson_sysconf.bridgetype) {
+			case LS7A:
+				loongson_fdt_blob = __dtb_loongson64c_4core_ls7a_begin;
+				break;
+			case RS780E:
+				loongson_fdt_blob = __dtb_loongson64c_4core_rs780e_begin;
+				break;
+			default:
+				break;
+			}
+			break;
+		case PRID_REV_LOONGSON3B_R1:
+		case PRID_REV_LOONGSON3B_R2:
+			if (loongson_sysconf.bridgetype == RS780E)
+				loongson_fdt_blob = __dtb_loongson64c_8core_rs780e_begin;
+			break;
+		default:
+			break;
+		}
+	} else if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G) {
+		if (loongson_sysconf.bridgetype == LS7A)
+			loongson_fdt_blob = __dtb_loongson64g_4core_ls7a_begin;
+	}
+
+	if (!loongson_fdt_blob)
+		pr_err("Failed to determine built-in Loongson64 dtb\n");
 }

arch/mips/loongson64/init.c

@@ -7,6 +7,8 @@
 #include <linux/irqchip.h>
 #include <linux/logic_pio.h>
 #include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/bootinfo.h>
 #include <asm/traps.h>
 #include <asm/smp-ops.h>
@@ -40,6 +42,11 @@ void rs780e_early_config(void)
 	node_id_offset = 37;
 }
 
+void virtual_early_config(void)
+{
+	node_id_offset = 44;
+}
+
 void __init prom_init(void)
 {
 	fw_init_cmdline();
@@ -63,41 +70,76 @@ void __init prom_free_prom_memory(void)
 {
 }
 
-static __init void reserve_pio_range(void)
+static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_t hw_start,
+				    resource_size_t size)
 {
+	int ret = 0;
 	struct logic_pio_hwaddr *range;
+	unsigned long vaddr;
 
 	range = kzalloc(sizeof(*range), GFP_ATOMIC);
 	if (!range)
-		return;
+		return -ENOMEM;
 
-	range->fwnode = &of_root->fwnode;
-	range->size = MMIO_LOWER_RESERVED;
-	range->hw_start = LOONGSON_PCIIO_BASE;
+	range->fwnode = fwnode;
+	range->size = size;
+	range->hw_start = hw_start;
 	range->flags = LOGIC_PIO_CPU_MMIO;
 
-	if (logic_pio_register_range(range)) {
-		pr_err("Failed to reserve PIO range for legacy ISA\n");
-		goto free_range;
+	ret = logic_pio_register_range(range);
+	if (ret) {
+		kfree(range);
+		return ret;
 	}
 
-	if (WARN(range->io_start != 0,
-			"Reserved PIO range does not start from 0\n"))
-		goto unregister;
-
-	/*
-	 * i8259 would access I/O space, so mapping must be done here.
-	 * Please remove it when all drivers can be managed by logic_pio.
-	 */
-	ioremap_page_range(PCI_IOBASE, PCI_IOBASE + MMIO_LOWER_RESERVED,
-				LOONGSON_PCIIO_BASE,
-				pgprot_device(PAGE_KERNEL));
-
-	return;
-unregister:
-	logic_pio_unregister_range(range);
-free_range:
-	kfree(range);
+	/* Legacy ISA must placed at the start of PCI_IOBASE */
+	if (range->io_start != 0) {
+		logic_pio_unregister_range(range);
+		kfree(range);
+		return -EINVAL;
+	}
+
+	vaddr = PCI_IOBASE + range->io_start;
+
+	ioremap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL));
+
+	return 0;
+}
+
+static __init void reserve_pio_range(void)
+{
+	struct device_node *np;
+
+	for_each_node_by_name(np, "isa") {
+		struct of_range range;
+		struct of_range_parser parser;
+
+		pr_info("ISA Bridge: %pOF\n", np);
+
+		if (of_range_parser_init(&parser, np)) {
+			pr_info("Failed to parse resources.\n");
+			break;
+		}
+
+		for_each_of_range(&parser, &range) {
+			switch (range.flags & IORESOURCE_TYPE_BITS) {
+			case IORESOURCE_IO:
+				pr_info(" IO 0x%016llx..0x%016llx  ->  0x%016llx\n",
+					range.cpu_addr,
+					range.cpu_addr + range.size - 1,
+					range.bus_addr);
+				if (add_legacy_isa_io(&np->fwnode, range.cpu_addr, range.size))
+					pr_warn("Failed to reserve legacy IO in Logic PIO\n");
+				break;
+			case IORESOURCE_MEM:
+				pr_info(" MEM 0x%016llx..0x%016llx  ->  0x%016llx\n",
+					range.cpu_addr,
+					range.cpu_addr + range.size - 1,
+					range.bus_addr);
+				break;
+			}
+		}
+	}
 }
 
 void __init arch_init_irq(void)

arch/mips/mm/c-r4k.c

@@ -1066,12 +1066,12 @@ static inline int alias_74k_erratum(struct cpuinfo_mips *c)
 		if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
 			present = 1;
 		if (rev == PRID_REV_ENCODE_332(2, 4, 0))
-			write_c0_config6(read_c0_config6() | MIPS_CONF6_MTI_SYND);
+			write_c0_config6(read_c0_config6() | MTI_CONF6_SYND);
 		break;
 	case PRID_IMP_1074K:
 		if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
 			present = 1;
-			write_c0_config6(read_c0_config6() | MIPS_CONF6_MTI_SYND);
+			write_c0_config6(read_c0_config6() | MTI_CONF6_SYND);
 		}
 		break;
 	default:

arch/mips/paravirt/Kconfig

-# SPDX-License-Identifier: GPL-2.0
-if MIPS_PARAVIRT
-
-config MIPS_PCI_VIRTIO
-	def_bool y
-
-endif #  MIPS_PARAVIRT

arch/mips/paravirt/Makefile

-#
-# Makefile for MIPS para-virtualized specific kernel interface routines
-# under Linux.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2013 Cavium, Inc.
-#
-
-obj-y := setup.o serial.o paravirt-irq.o
-
-obj-$(CONFIG_SMP)		+= paravirt-smp.o

arch/mips/paravirt/Platform

-#
-# Generic para-virtualized guest.
-#
-cflags-$(CONFIG_MIPS_PARAVIRT)		+=				\
-		-I$(srctree)/arch/mips/include/asm/mach-paravirt
-
-load-$(CONFIG_MIPS_PARAVIRT)	= 0xffffffff80010000

arch/mips/paravirt/serial.c

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2013 Cavium, Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/virtio_console.h>
-#include <linux/kvm_para.h>
-#include <asm/setup.h>
-
-/*
- * Emit one character to the boot console.
- */
-void prom_putchar(char c)
-{
-	kvm_hypercall3(KVM_HC_MIPS_CONSOLE_OUTPUT, 0 /*  port 0 */,
-		(unsigned long)&c, 1 /* len == 1 */);
-}
-
-#ifdef CONFIG_VIRTIO_CONSOLE
-static int paravirt_put_chars(u32 vtermno, const char *buf, int count)
-{
-	kvm_hypercall3(KVM_HC_MIPS_CONSOLE_OUTPUT, vtermno,
-		(unsigned long)buf, count);
-
-	return count;
-}
-
-static int __init paravirt_cons_init(void)
-{
-	virtio_cons_early_init(paravirt_put_chars);
-	return 0;
-}
-core_initcall(paravirt_cons_init);
-
-#endif

arch/mips/pci/Makefile

@@ -23,7 +23,6 @@ obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
 obj-$(CONFIG_PCI_AR2315)	+= pci-ar2315.o
 obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
 obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
-obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-virtio-guest.o
 obj-$(CONFIG_PCI_XTALK_BRIDGE)	+= pci-xtalk-bridge.o
 #
 # These are still pretty much in the old state, watch, go blind.