ASoC: Add ssm2518 support

This patch adds a ASoC CODEC driver for the SSM2516. The SSM2516 is a stereo
Class-D audio amplifier with an I2S interface for audio in and a built-in
dynamic range control processor.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Documentation/devicetree/bindings/sound/ssm2518.txt

+SSM2518 audio amplifier
+
+This device supports I2C only.
+
+Required properties:
+  - compatible : Must be "adi,ssm2518"
+  - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low)
+	or 0x35 (ADDR pin high)
+
+Optional properties:
+  - gpios : GPIO connected to the nSD pin. If the property is not present it is
+	        assumed that the nSD pin is hardwired to always on.
+
+Example:
+
+	ssm2518: ssm2518@34 {
+		compatible = "adi,ssm2518";
+		reg = <0x34>;
+		gpios = <&gpio 5 0>;
+	};

include/linux/platform_data/ssm2518.h

+/*
+ * SSM2518 amplifier audio driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__
+#define __LINUX_PLATFORM_DATA_SSM2518_H__
+
+/**
+ * struct ssm2518_platform_data - Platform data for the ssm2518 driver
+ * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is
+ *            hardwired.
+ */
+struct ssm2518_platform_data {
+	int enable_gpio;
+};
+
+#endif

sound/soc/codecs/Kconfig

@@ -60,6 +60,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_SI476X if MFD_SI476X_CORE
 	select SND_SOC_SN95031 if INTEL_SCU_IPC
 	select SND_SOC_SPDIF
+	select SND_SOC_SSM2518 if I2C
 	select SND_SOC_SSM2602 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_STA32X if I2C
 	select SND_SOC_STA529 if I2C
@@ -313,6 +314,9 @@ config SND_SOC_SN95031
 config SND_SOC_SPDIF
 	tristate
 
+config SND_SOC_SSM2518
+	tristate
+
 config SND_SOC_SSM2602
 	tristate
 

sound/soc/codecs/Makefile

@@ -52,6 +52,7 @@ snd-soc-si476x-objs := si476x.o
 snd-soc-sn95031-objs := sn95031.o
 snd-soc-spdif-tx-objs := spdif_transciever.o
 snd-soc-spdif-rx-objs := spdif_receiver.o
+snd-soc-ssm2518-objs := ssm2518.o
 snd-soc-ssm2602-objs := ssm2602.o
 snd-soc-sta32x-objs := sta32x.o
 snd-soc-sta529-objs := sta529.o
@@ -176,6 +177,7 @@ obj-$(CONFIG_SND_SOC_SIGMADSP)	+= snd-soc-sigmadsp.o
 obj-$(CONFIG_SND_SOC_SI476X)	+= snd-soc-si476x.o
 obj-$(CONFIG_SND_SOC_SN95031)	+=snd-soc-sn95031.o
 obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif-rx.o snd-soc-spdif-tx.o
+obj-$(CONFIG_SND_SOC_SSM2518)	+= snd-soc-ssm2518.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
 obj-$(CONFIG_SND_SOC_STA32X)   += snd-soc-sta32x.o
 obj-$(CONFIG_SND_SOC_STA529)   += snd-soc-sta529.o

sound/soc/codecs/ssm2518.h

+/*
+ * SSM2518 amplifier audio driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __SND_SOC_CODECS_SSM2518_H__
+#define __SND_SOC_CODECS_SSM2518_H__
+
+#define SSM2518_SYSCLK 0
+
+enum ssm2518_sysclk_src {
+	SSM2518_SYSCLK_SRC_MCLK = 0,
+	SSM2518_SYSCLK_SRC_BCLK = 1,
+};
+
+#endif