Commit b6bef463 authored by Jingoo Han's avatar Jingoo Han Committed by Linus Torvalds

backlight: s6e63m0: remove redundant variable 'before_power'

'before_power' was used to check the previous status when resume() is
called.  However, FB_BLANK_POWERDOWN was used in suspend() all the time,
so there is no need to check the previous status.  Also, redundant return
variables are removed to reduce the code.
Signed-off-by: default avatarJingoo Han <jg1.han@samsung.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 81c650e3
......@@ -827,44 +827,26 @@ static int s6e63m0_remove(struct spi_device *spi)
}
#if defined(CONFIG_PM)
static unsigned int before_power;
static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg)
{
int ret = 0;
struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
before_power = lcd->power;
/*
* when lcd panel is suspend, lcd panel becomes off
* regardless of status.
*/
ret = s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
return ret;
return s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
}
static int s6e63m0_resume(struct spi_device *spi)
{
int ret = 0;
struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
/*
* after suspended, if lcd panel status is FB_BLANK_UNBLANK
* (at that time, before_power is FB_BLANK_UNBLANK) then
* it changes that status to FB_BLANK_POWERDOWN to get lcd on.
*/
if (before_power == FB_BLANK_UNBLANK)
lcd->power = FB_BLANK_POWERDOWN;
lcd->power = FB_BLANK_POWERDOWN;
dev_dbg(&spi->dev, "before_power = %d\n", before_power);
ret = s6e63m0_power(lcd, before_power);
return ret;
return s6e63m0_power(lcd, FB_BLANK_UNBLANK);
}
#else
#define s6e63m0_suspend NULL
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment