Commit b6e0c419 authored by Carolyn Wyborny's avatar Carolyn Wyborny Committed by Jeff Kirsher

igb: Move DMA Coalescing init code to separate function.

This patch moves the DMA Coalescing feature initialization code from
igb_reset to a new function and replaces it with a call to the new
function.
Signed-off-by: default avatarCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 65189d28
......@@ -204,6 +204,7 @@ static struct pci_error_handlers igb_err_handler = {
.resume = igb_io_resume,
};
static void igb_init_dmac(struct igb_adapter *adapter, u32 pba);
static struct pci_driver igb_driver = {
.name = igb_driver_name,
......@@ -1728,63 +1729,8 @@ void igb_reset(struct igb_adapter *adapter)
if (hw->mac.ops.init_hw(hw))
dev_err(&pdev->dev, "Hardware Error\n");
if (hw->mac.type > e1000_82580) {
if (adapter->flags & IGB_FLAG_DMAC) {
u32 reg;
/*
* DMA Coalescing high water mark needs to be higher
* than * the * Rx threshold. The Rx threshold is
* currently * pba - 6, so we * should use a high water
* mark of pba * - 4. */
hwm = (pba - 4) << 10;
reg = (((pba-6) << E1000_DMACR_DMACTHR_SHIFT)
& E1000_DMACR_DMACTHR_MASK);
/* transition to L0x or L1 if available..*/
reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
/* watchdog timer= +-1000 usec in 32usec intervals */
reg |= (1000 >> 5);
wr32(E1000_DMACR, reg);
/* no lower threshold to disable coalescing(smart fifb)
* -UTRESH=0*/
wr32(E1000_DMCRTRH, 0);
/* set hwm to PBA - 2 * max frame size */
wr32(E1000_FCRTC, hwm);
/*
* This sets the time to wait before requesting tran-
* sition to * low power state to number of usecs needed
* to receive 1 512 * byte frame at gigabit line rate
*/
reg = rd32(E1000_DMCTLX);
reg |= IGB_DMCTLX_DCFLUSH_DIS;
/* Delay 255 usec before entering Lx state. */
reg |= 0xFF;
wr32(E1000_DMCTLX, reg);
/* free space in Tx packet buffer to wake from DMAC */
wr32(E1000_DMCTXTH,
(IGB_MIN_TXPBSIZE -
(IGB_TX_BUF_4096 + adapter->max_frame_size))
>> 6);
/* make low power state decision controlled by DMAC */
reg = rd32(E1000_PCIEMISC);
reg |= E1000_PCIEMISC_LX_DECISION;
wr32(E1000_PCIEMISC, reg);
} /* end if IGB_FLAG_DMAC set */
}
if (hw->mac.type == e1000_82580) {
u32 reg = rd32(E1000_PCIEMISC);
wr32(E1000_PCIEMISC,
reg & ~E1000_PCIEMISC_LX_DECISION);
}
igb_init_dmac(adapter, pba);
if (!netif_running(adapter->netdev))
igb_power_down_link(adapter);
......@@ -7098,4 +7044,70 @@ static void igb_vmm_control(struct igb_adapter *adapter)
}
}
static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
{
struct e1000_hw *hw = &adapter->hw;
u32 dmac_thr;
u16 hwm;
if (hw->mac.type > e1000_82580) {
if (adapter->flags & IGB_FLAG_DMAC) {
u32 reg;
/* force threshold to 0. */
wr32(E1000_DMCTXTH, 0);
/*
* DMA Coalescing high water mark needs to be higher
* than the RX threshold. set hwm to PBA - 2 * max
* frame size
*/
hwm = pba - (2 * adapter->max_frame_size);
reg = rd32(E1000_DMACR);
reg &= ~E1000_DMACR_DMACTHR_MASK;
dmac_thr = pba - 4;
reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT)
& E1000_DMACR_DMACTHR_MASK);
/* transition to L0x or L1 if available..*/
reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
/* watchdog timer= +-1000 usec in 32usec intervals */
reg |= (1000 >> 5);
wr32(E1000_DMACR, reg);
/*
* no lower threshold to disable
* coalescing(smart fifb)-UTRESH=0
*/
wr32(E1000_DMCRTRH, 0);
wr32(E1000_FCRTC, hwm);
reg = (IGB_DMCTLX_DCFLUSH_DIS | 0x4);
wr32(E1000_DMCTLX, reg);
/*
* free space in tx packet buffer to wake from
* DMA coal
*/
wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
(IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
/*
* make low power state decision controlled
* by DMA coal
*/
reg = rd32(E1000_PCIEMISC);
reg &= ~E1000_PCIEMISC_LX_DECISION;
wr32(E1000_PCIEMISC, reg);
} /* endif adapter->dmac is not disabled */
} else if (hw->mac.type == e1000_82580) {
u32 reg = rd32(E1000_PCIEMISC);
wr32(E1000_PCIEMISC, reg & ~E1000_PCIEMISC_LX_DECISION);
wr32(E1000_DMACR, 0);
}
}
/* igb_main.c */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment