Skip to content

L
linux
Commit b6e6f175 authored by Martin Dalecki's avatar Martin Dalecki Committed by Linus Torvalds
Browse files
Options

[PATCH] [PATCH} 2.5.19 IDE 79 

 - Fix typo in sparc_v9 code, in ns87415, just introduced.

 - Eliminate unnecessary struct hd_drive_hob_hdr those are
   in reality precisely the same registers as usual.

 - Eliminate control_t, nowhere used type.

 - Unfold ide_init_drive_cmd() at the places where it's used. This makes obvious
   that REQ_DRIVE_CMD gets only used on the ioctl command path.
parent 8b4e98ea
Hide whitespace changes
Inline Side-by-side
Showing with 226 additions and 296 deletions
drivers/ide/device.c
View file @ b6e6f175
......@@ -142,4 +142,18 @@ void ata_reset(struct ata_channel *ch)
EXPORT_SYMBOL(ata_reset);
/*
* Output a complete register file.
*/
void ata_out_regfile(struct ata_device *drive, struct hd_drive_task_hdr *rf)
{
struct ata_channel *ch = drive->channel;
OUT_BYTE(rf->feature, ch->io_ports[IDE_FEATURE_OFFSET]);
OUT_BYTE(rf->sector_count, ch->io_ports[IDE_NSECTOR_OFFSET]);
OUT_BYTE(rf->sector_number, ch->io_ports[IDE_SECTOR_OFFSET]);
OUT_BYTE(rf->low_cylinder, ch->io_ports[IDE_LCYL_OFFSET]);
OUT_BYTE(rf->high_cylinder, ch->io_ports[IDE_HCYL_OFFSET]);
}
MODULE_LICENSE("GPL");
drivers/ide/ide-cd.c
View file @ b6e6f175
......@@ -535,7 +535,7 @@ static void cdrom_queue_request_sense(struct ata_device *drive,
/* stuff the sense request in front of our current request */
rq = &info->request_sense_request;
ide_init_drive_cmd(rq);
memset(rq, 0, sizeof(*rq));
rq->cmd[0] = GPCMD_REQUEST_SENSE;
rq->cmd[4] = pc->buflen;
rq->flags = REQ_SENSE;
......@@ -1389,9 +1389,8 @@ int cdrom_queue_packet_command(struct ata_device *drive, unsigned char *cmd,
/* Start of retry loop. */
do {
ide_init_drive_cmd(&rq);
memset(&rq, 0, sizeof(rq));
memcpy(rq.cmd, cmd, CDROM_PACKET_SIZE);
rq.flags = REQ_PC;
/* FIXME --mdcki */
......@@ -2276,7 +2275,7 @@ int ide_cdrom_reset (struct cdrom_device_info *cdi)
struct request req;
int ret;
ide_init_drive_cmd(&req);
memset(&req, 0, sizeof(req));
req.flags = REQ_SPECIAL;
ret = ide_do_drive_cmd(drive, &req, ide_wait);
......
drivers/ide/ide-disk.c
View file @ b6e6f175
......@@ -264,8 +264,6 @@ static ide_startstop_t lba48_do_request(struct ata_device *drive, struct request
args.hobfile.high_cylinder = (block >>= 8); /* hi lba */
args.hobfile.device_head = drive->select.all;
args.hobfile.control = 0x80;
args.taskfile.command = get_command(drive, rq_data_dir(rq));
#ifdef DEBUG
......@@ -728,7 +726,6 @@ static u64 set_max_address_ext(struct ata_device *drive, u64 addr_req)
args.hobfile.high_cylinder = (addr_req >>= 8);
args.hobfile.device_head = 0x40;
args.hobfile.control = 0x80;
args.handler = task_no_data_intr;
/* submit command request */
......
drivers/ide/ide-floppy.c
View file @ b6e6f175
......@@ -712,10 +712,10 @@ static void idefloppy_update_buffers(struct ata_device *drive, struct request *r
static void idefloppy_queue_pc_head(struct ata_device *drive,
struct atapi_packet_command *pc, struct request *rq)
{
ide_init_drive_cmd (rq);
memset(rq, 0, sizeof(*rq));
rq->flags = IDEFLOPPY_RQ;
/* FIXME: --mdcki */
rq->buffer = (char *) pc;
rq->flags = IDEFLOPPY_RQ;
(void) ide_do_drive_cmd (drive, rq, ide_preempt);
}
......@@ -1065,10 +1065,10 @@ static ide_startstop_t idefloppy_issue_pc(struct ata_device *drive, struct reque
#endif
ata_irq_enable(drive, 1);
OUT_BYTE (dma_ok ? 1:0,IDE_FEATURE_REG); /* Use PIO/DMA */
OUT_BYTE (bcount.b.high,IDE_BCOUNTH_REG);
OUT_BYTE (bcount.b.low,IDE_BCOUNTL_REG);
OUT_BYTE (drive->select.all,IDE_SELECT_REG);
OUT_BYTE(dma_ok ? 1:0,IDE_FEATURE_REG); /* Use PIO/DMA */
OUT_BYTE(bcount.b.high,IDE_BCOUNTH_REG);
OUT_BYTE(bcount.b.low,IDE_BCOUNTL_REG);
OUT_BYTE(drive->select.all,IDE_SELECT_REG);
#ifdef CONFIG_BLK_DEV_IDEDMA
if (dma_ok) { /* Begin DMA, if necessary */
......@@ -1271,11 +1271,12 @@ static int idefloppy_queue_pc_tail(struct ata_device *drive, struct atapi_packet
{
struct request rq;
ide_init_drive_cmd (&rq);
memset(&rq, 0, sizeof(rq));
/* FIXME: --mdcki */
rq.buffer = (char *) pc;
rq.flags = IDEFLOPPY_RQ;
return ide_do_drive_cmd (drive, &rq, ide_wait);
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
/*
......
drivers/ide/ide-tape.c
View file @ b6e6f175
......@@ -1921,7 +1921,7 @@ static void idetape_create_request_sense_cmd(struct atapi_packet_command *pc)
*/
static void idetape_queue_pc_head(struct ata_device *drive, struct atapi_packet_command *pc, struct request *rq)
{
ide_init_drive_cmd (rq);
memset(rq, 0, sizeof(*rq));
rq->buffer = (char *) pc;
rq->flags = IDETAPE_PC_RQ1;
ide_do_drive_cmd(drive, rq, ide_preempt);
......@@ -3153,7 +3153,7 @@ static int __idetape_queue_pc_tail(struct ata_device *drive, struct atapi_packet
{
struct request rq;
ide_init_drive_cmd (&rq);
memset(&rq, 0, sizeof(rq));
/* FIXME: --mdcki */
rq.buffer = (char *) pc;
rq.flags = IDETAPE_PC_RQ1;
......@@ -3414,17 +3414,17 @@ static int idetape_queue_rw_tail(struct ata_device *drive, int cmd, int blocks,
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 2)
printk (KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd);
#endif /* IDETAPE_DEBUG_LOG */
#endif
#if IDETAPE_DEBUG_BUGS
if (idetape_pipeline_active (tape)) {
printk (KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n");
return (0);
}
#endif /* IDETAPE_DEBUG_BUGS */
#endif
ide_init_drive_cmd (&rq);
rq.bio = bio;
memset(&rq, 0, sizeof(rq));
rq.flags = cmd;
rq.bio = bio;
rq.sector = tape->first_frame_position;
rq.nr_sectors = rq.current_nr_sectors = blocks;
if (tape->onstream)
......@@ -3472,7 +3472,7 @@ static void idetape_onstream_read_back_buffer(struct ata_device *drive)
printk(KERN_INFO "ide-tape: %s: read back logical block %d, data %x %x %x %x\n", tape->name, logical_blk_num, *p++, *p++, *p++, *p++);
#endif
rq = &stage->rq;
ide_init_drive_cmd (rq);
memset(rq, 0, sizeof(*rq));
rq->flags = IDETAPE_WRITE_RQ;
rq->sector = tape->first_frame_position;
rq->nr_sectors = rq->current_nr_sectors = tape->capabilities.ctl;
......@@ -3748,7 +3748,7 @@ static int idetape_add_chrdev_write_request(struct ata_device *drive, int blocks
}
}
rq = &new_stage->rq;
ide_init_drive_cmd (rq);
memset(rq, 0, sizeof(*rq));
rq->flags = IDETAPE_WRITE_RQ;
rq->sector = tape->first_frame_position; /* Doesn't actually matter - We always assume sequential access */
rq->nr_sectors = rq->current_nr_sectors = blocks;
......@@ -3938,7 +3938,8 @@ static int idetape_initiate_read(struct ata_device *drive, int max_stages)
}
if (tape->restart_speed_control_req)
idetape_restart_speed_control(drive);
ide_init_drive_cmd (&rq);
memset(&rq, 0, sizeof(rq));
rq.flags = IDETAPE_READ_RQ;
rq.sector = tape->first_frame_position;
rq.nr_sectors = rq.current_nr_sectors = blocks;
......
drivers/ide/ide-taskfile.c
View file @ b6e6f175
......@@ -314,7 +314,6 @@ ide_startstop_t ata_taskfile(struct ata_device *drive,
struct ata_taskfile *args, struct request *rq)
{
struct hd_driveid *id = drive->id;
u8 HIHI = (drive->addressing) ? 0xE0 : 0xEF;
/* (ks/hs): Moved to start, do not use for multiple out commands */
if (args->handler != task_mulout_intr) {
......@@ -322,25 +321,16 @@ ide_startstop_t ata_taskfile(struct ata_device *drive,
ata_mask(drive);
}
if ((id->command_set_2 & 0x0400) &&
(id->cfs_enable_2 & 0x0400) &&
(drive->addressing == 1)) {
OUT_BYTE(args->hobfile.feature, IDE_FEATURE_REG);
OUT_BYTE(args->hobfile.sector_count, IDE_NSECTOR_REG);
OUT_BYTE(args->hobfile.sector_number, IDE_SECTOR_REG);
OUT_BYTE(args->hobfile.low_cylinder, IDE_LCYL_REG);
OUT_BYTE(args->hobfile.high_cylinder, IDE_HCYL_REG);
}
if ((id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) &&
(drive->addressing == 1))
ata_out_regfile(drive, &args->hobfile);
OUT_BYTE(args->taskfile.feature, IDE_FEATURE_REG);
OUT_BYTE(args->taskfile.sector_count, IDE_NSECTOR_REG);
/* refers to number of sectors to transfer */
OUT_BYTE(args->taskfile.sector_number, IDE_SECTOR_REG);
/* refers to sector offset or start sector */
OUT_BYTE(args->taskfile.low_cylinder, IDE_LCYL_REG);
OUT_BYTE(args->taskfile.high_cylinder, IDE_HCYL_REG);
ata_out_regfile(drive, &args->taskfile);
OUT_BYTE((args->taskfile.device_head & HIHI) | drive->select.all, IDE_SELECT_REG);
{
u8 HIHI = (drive->addressing) ? 0xE0 : 0xEF;
OUT_BYTE((args->taskfile.device_head & HIHI) | drive->select.all, IDE_SELECT_REG);
}
if (args->handler != NULL) {
/* This is apparently supposed to reset the wait timeout for
......@@ -361,8 +351,7 @@ ide_startstop_t ata_taskfile(struct ata_device *drive,
} else {
/*
* FIXME: this is a gross hack, need to unify tcq dma proc and
* regular dma proc -- basically split stuff that needs to act
* on a request from things like ide_dma_check etc.
* regular dma proc.
*/
if (!drive->using_dma)
......@@ -760,15 +749,6 @@ void ide_cmd_type_parser(struct ata_taskfile *args)
}
}
/*
* This function is intended to be used prior to invoking ide_do_drive_cmd().
*/
void ide_init_drive_cmd(struct request *rq)
{
memset(rq, 0, sizeof(*rq));
rq->flags = REQ_DRIVE_CMD;
}
/*
* This function issues a special IDE device request onto the request queue.
*
......@@ -849,139 +829,12 @@ int ide_raw_taskfile(struct ata_device *drive, struct ata_taskfile *args)
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
/*
* Implement generic ioctls invoked from userspace to imlpement specific
* functionality.
*
* Unfortunately every single low level programm out there is using this
* interface.
*/
/*
* Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
* 1 : Safe to update drive->id DMA registers.
* 0 : OOPs not allowed.
*/
static int set_transfer(struct ata_device *drive, struct ata_taskfile *args)
{
if ((args->taskfile.command == WIN_SETFEATURES) &&
(args->taskfile.sector_number >= XFER_SW_DMA_0) &&
(args->taskfile.feature == SETFEATURES_XFER) &&
(drive->id->dma_ultra ||
drive->id->dma_mword ||
drive->id->dma_1word))
return 1;
return 0;
}
/*
* Verify that we are doing an approved SETFEATURES_XFER with respect
* to the hardware being able to support request. Since some hardware
* can improperly report capabilties, we check to see if the host adapter
* in combination with the device (usually a disk) properly detect
* and acknowledge each end of the ribbon.
*/
static int ata66_check(struct ata_device *drive, struct ata_taskfile *args)
{
if ((args->taskfile.command == WIN_SETFEATURES) &&
(args->taskfile.sector_number > XFER_UDMA_2) &&
(args->taskfile.feature == SETFEATURES_XFER)) {
if (!drive->channel->udma_four) {
printk("%s: Speed warnings UDMA 3/4/5 is not functional.\n", drive->channel->name);
return 1;
}
#ifndef CONFIG_IDEDMA_IVB
if ((drive->id->hw_config & 0x6000) == 0) {
#else
if (((drive->id->hw_config & 0x2000) == 0) ||
((drive->id->hw_config & 0x4000) == 0)) {
#endif
printk("%s: Speed warnings UDMA 3/4/5 is not functional.\n", drive->name);
return 1;
}
}
return 0;
}
int ide_cmd_ioctl(struct ata_device *drive, unsigned long arg)
{
int err = 0;
u8 vals[4];
u8 *argbuf = vals;
u8 pio = 0;
int argsize = 4;
struct ata_taskfile args;
struct request rq;
ide_init_drive_cmd(&rq);
/* Wait for drive ready.
*/
if (!arg)
return ide_do_drive_cmd(drive, &rq, ide_wait);
/* Second phase.
*/
if (copy_from_user(vals, (void *)arg, 4))
return -EFAULT;
args.taskfile.feature = vals[2];
args.taskfile.sector_count = vals[3];
args.taskfile.sector_number = vals[1];
args.taskfile.low_cylinder = 0x00;
args.taskfile.high_cylinder = 0x00;
args.taskfile.device_head = 0x00;
args.taskfile.command = vals[0];
if (vals[3]) {
argsize = 4 + (SECTOR_WORDS * 4 * vals[3]);
argbuf = kmalloc(argsize, GFP_KERNEL);
if (argbuf == NULL)
return -ENOMEM;
memcpy(argbuf, vals, 4);
memset(argbuf + 4, 0, argsize - 4);
}
/* Always make sure the transfer reate has been setup.
* FIXME: what about setting up the drive with ->tuneproc?
*/
if (set_transfer(drive, &args)) {
pio = vals[1];
if (ata66_check(drive, &args))
goto abort;
}
/* Issue ATA command and wait for completion.
*/
rq.buffer = argbuf;
err = ide_do_drive_cmd(drive, &rq, ide_wait);
if (!err && pio) {
/* active-retuning-calls future */
/* FIXME: what about the setup for the drive?! */
if (drive->channel->speedproc)
drive->channel->speedproc(drive, pio);
}
abort:
if (copy_to_user((void *)arg, argbuf, argsize))
err = -EFAULT;
if (argsize > 4)
kfree(argbuf);
return err;
}
EXPORT_SYMBOL(drive_is_ready);
EXPORT_SYMBOL(ata_read);
EXPORT_SYMBOL(ata_write);
EXPORT_SYMBOL(ata_taskfile);
EXPORT_SYMBOL(recal_intr);
EXPORT_SYMBOL(task_no_data_intr);
EXPORT_SYMBOL(ide_init_drive_cmd);
EXPORT_SYMBOL(ide_do_drive_cmd);
EXPORT_SYMBOL(ide_raw_taskfile);
EXPORT_SYMBOL(ide_cmd_type_parser);
EXPORT_SYMBOL(ide_cmd_ioctl);
drivers/ide/ide.c
View file @ b6e6f175
......@@ -672,19 +672,6 @@ static ide_startstop_t drive_cmd_intr(struct ata_device *drive, struct request *
return ide_stopped;
}
/*
* Issue a simple drive command. The drive must be selected beforehand.
*/
static void drive_cmd(struct ata_device *drive, u8 cmd, u8 nsect)
{
ide_set_handler(drive, drive_cmd_intr, WAIT_CMD, NULL);
ata_irq_enable(drive, 1);
ata_mask(drive);
OUT_BYTE(nsect, IDE_NSECTOR_REG);
OUT_BYTE(cmd, IDE_COMMAND_REG);
}
/*
* Busy-wait for the drive status to be not "busy". Check then the status for
* all of the "good" bits and none of the "bad" bits, and if all is okay it
......@@ -815,21 +802,26 @@ static ide_startstop_t start_request(struct ata_device *drive, struct request *r
#ifdef DEBUG
printk("%s: DRIVE_CMD ", drive->name);
printk("cmd=0x%02x ", args[0]);
printk("sc=0x%02x ", args[1]);
printk("fr=0x%02x ", args[2]);
printk("xx=0x%02x\n", args[3]);
printk(" sc=0x%02x ", args[1]);
printk(" fr=0x%02x ", args[2]);
printk(" xx=0x%02x\n", args[3]);
#endif
ide_set_handler(drive, drive_cmd_intr, WAIT_CMD, NULL);
ata_irq_enable(drive, 1);
ata_mask(drive);
if (args[0] == WIN_SMART) {
OUT_BYTE(0x4f, IDE_LCYL_REG);
OUT_BYTE(0xc2, IDE_HCYL_REG);
OUT_BYTE(args[2],IDE_FEATURE_REG);
OUT_BYTE(args[1],IDE_SECTOR_REG);
drive_cmd(drive, args[0], args[3]);
return ide_started;
struct hd_drive_task_hdr regfile;
regfile.feature = args[2];
regfile.sector_count = args[3];
regfile.sector_number = args[1];
regfile.low_cylinder = 0x4f;
regfile.high_cylinder = 0xc2;
ata_out_regfile(drive, &regfile);
} else {
OUT_BYTE(args[2], IDE_FEATURE_REG);
OUT_BYTE(args[1], IDE_NSECTOR_REG);
}
OUT_BYTE(args[2],IDE_FEATURE_REG);
drive_cmd(drive, args[0], args[1]);
OUT_BYTE(args[0], IDE_COMMAND_REG);
return ide_started;
}
......
drivers/ide/ioctl.c
View file @ b6e6f175
......@@ -32,6 +32,119 @@
#include "ioctl.h"
/*
* Implement generic ioctls invoked from userspace to imlpement specific
* functionality.
*
* Unfortunately every single low level programm out there is using this
* interface.
*/
static int cmd_ioctl(struct ata_device *drive, unsigned long arg)
{
int err = 0;
u8 vals[4];
u8 *argbuf = vals;
u8 pio = 0;
int argsize = 4;
struct ata_taskfile args;
struct request rq;
memset(&rq, 0, sizeof(rq));
rq.flags = REQ_DRIVE_CMD;
/* If empty parameter file - wait for drive ready.
*/
if (!arg)
return ide_do_drive_cmd(drive, &rq, ide_wait);
/* Second phase.
*/
if (copy_from_user(vals, (void *)arg, 4))
return -EFAULT;
args.taskfile.feature = vals[2];
args.taskfile.sector_count = vals[3];
args.taskfile.sector_number = vals[1];
args.taskfile.low_cylinder = 0x00;
args.taskfile.high_cylinder = 0x00;
args.taskfile.device_head = 0x00;
args.taskfile.command = vals[0];
if (vals[3]) {
argsize = 4 + (SECTOR_WORDS * 4 * vals[3]);
argbuf = kmalloc(argsize, GFP_KERNEL);
if (argbuf == NULL)
return -ENOMEM;
memcpy(argbuf, vals, 4);
memset(argbuf + 4, 0, argsize - 4);
}
/*
* Always make sure the transfer reate has been setup.
*
* FIXME: what about setting up the drive with ->tuneproc?
*
* Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
* 1 : Safe to update drive->id DMA registers.
* 0 : OOPs not allowed.
*/
if ((args.taskfile.command == WIN_SETFEATURES) &&
(args.taskfile.sector_number >= XFER_SW_DMA_0) &&
(args.taskfile.feature == SETFEATURES_XFER) &&
(drive->id->dma_ultra ||
drive->id->dma_mword ||
drive->id->dma_1word)) {
pio = vals[1];
/*
* Verify that we are doing an approved SETFEATURES_XFER with
* respect to the hardware being able to support request.
* Since some hardware can improperly report capabilties, we
* check to see if the host adapter in combination with the
* device (usually a disk) properly detect and acknowledge each
* end of the ribbon.
*/
if (args.taskfile.sector_number > XFER_UDMA_2) {
if (!drive->channel->udma_four) {
printk(KERN_WARNING "%s: Speed warnings UDMA > 2 is not functional.\n",
drive->channel->name);
goto abort;
}
#ifndef CONFIG_IDEDMA_IVB
if (!(drive->id->hw_config & 0x6000))
#else
if (!(drive->id->hw_config & 0x2000) ||
!(drive->id->hw_config & 0x4000))
#endif
{
printk(KERN_WARNING "%s: Speed warnings UDMA > 2 is not functional.\n",
drive->name);
goto abort;
}
}
}
/* Issue ATA command and wait for completion.
*/
rq.buffer = argbuf;
err = ide_do_drive_cmd(drive, &rq, ide_wait);
if (!err && pio) {
/* active-retuning-calls future */
/* FIXME: what about the setup for the drive?! */
if (drive->channel->speedproc)
drive->channel->speedproc(drive, pio);
}
abort:
if (copy_to_user((void *)arg, argbuf, argsize))
err = -EFAULT;
if (argsize > 4)
kfree(argbuf);
return err;
}
/*
* NOTE: Due to ridiculous coding habbits in the hdparm utility we have to
* always return unsigned long in case we are returning simple values.
......@@ -40,7 +153,7 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
{
unsigned int major, minor;
struct ata_device *drive;
struct request rq;
// struct request rq;
kdev_t dev;
dev = inode->i_rdev;
......@@ -50,7 +163,6 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
if ((drive = get_info_ptr(inode->i_rdev)) == NULL)
return -ENODEV;
/* Contrary to popular beleve we disallow even the reading of the ioctl
* values for users which don't have permission too. We do this becouse
* such information could be used by an attacker to deply a simple-user
......@@ -61,7 +173,6 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
ide_init_drive_cmd(&rq);
switch (cmd) {
case HDIO_GET_32BIT: {
unsigned long val = drive->channel->io_32bit;
......@@ -96,7 +207,6 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
/* FIXME: we can see that tuneproc whould do the
* locking!.
*/
if (ide_spin_wait_hwgroup(drive))
return -EBUSY;
......@@ -114,7 +224,6 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
return 0;
}
case HDIO_SET_UNMASKINTR:
if (arg < 0 || arg > 1)
return -EINVAL;
......@@ -202,9 +311,6 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
return 0;
}
case BLKRRPART: /* Re-read partition tables */
return ata_revalidate(inode->i_rdev);
case HDIO_GET_IDENTITY:
if (minor(inode->i_rdev) & PARTN_MASK)
return -EINVAL;
......@@ -222,12 +328,6 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP,
(long *) arg);
case HDIO_DRIVE_CMD:
if (!capable(CAP_SYS_RAWIO))
return -EACCES;
return ide_cmd_ioctl(drive, arg);
case HDIO_SET_NICE:
if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP))))
return -EPERM;
......@@ -241,6 +341,34 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
return 0;
case HDIO_GET_BUSSTATE:
if (put_user(drive->channel->bus_state, (long *)arg))
return -EFAULT;
return 0;
case HDIO_SET_BUSSTATE:
if (drive->channel->busproc)
drive->channel->busproc(drive, (int)arg);
return 0;
case HDIO_DRIVE_CMD:
if (!capable(CAP_SYS_RAWIO))
return -EACCES;
return cmd_ioctl(drive, arg);
/*
* uniform packet command handling
*/
case CDROMEJECT:
case CDROMCLOSETRAY:
return block_ioctl(inode->i_bdev, cmd, arg);
case BLKRRPART: /* Re-read partition tables */
return ata_revalidate(inode->i_rdev);
case BLKGETSIZE:
case BLKGETSIZE64:
case BLKROSET:
......@@ -254,25 +382,6 @@ int ata_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
case BLKBSZSET:
return blk_ioctl(inode->i_bdev, cmd, arg);
/*
* uniform packet command handling
*/
case CDROMEJECT:
case CDROMCLOSETRAY:
return block_ioctl(inode->i_bdev, cmd, arg);
case HDIO_GET_BUSSTATE:
if (put_user(drive->channel->bus_state, (long *)arg))
return -EFAULT;
return 0;
case HDIO_SET_BUSSTATE:
if (drive->channel->busproc)
drive->channel->busproc(drive, (int)arg);
return 0;
/* Now check whatever this particular ioctl has a device type
* specific implementation.
*/
......
drivers/ide/ns87415.c
View file @ b6e6f175
......@@ -193,7 +193,7 @@ static void __init ide_init_ns87415(struct ata_channel *hwif)
* XXX: Reset the device, if we don't it will not respond
* to select properly during first probe.
*/
ata_reset(struct ata_channel *hwif);
ata_reset(hwif);
#endif
}
......
drivers/scsi/ide-scsi.c
View file @ b6e6f175
......@@ -412,9 +412,9 @@ static ide_startstop_t idescsi_issue_pc(struct ata_device *drive, struct request
ata_select(drive, 10);
ata_irq_enable(drive, 1);
OUT_BYTE (dma_ok,IDE_FEATURE_REG);
OUT_BYTE (bcount >> 8,IDE_BCOUNTH_REG);
OUT_BYTE (bcount & 0xff,IDE_BCOUNTL_REG);
OUT_BYTE(dma_ok,IDE_FEATURE_REG);
OUT_BYTE(bcount >> 8,IDE_BCOUNTH_REG);
OUT_BYTE(bcount & 0xff,IDE_BCOUNTL_REG);
if (dma_ok) {
set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
......@@ -662,17 +662,20 @@ static int idescsi_queue(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
}
}
ide_init_drive_cmd (rq);
memset(rq, 0, sizeof(*rq));
rq->flags = REQ_SPECIAL;
rq->special = (char *) pc;
rq->bio = idescsi_dma_bio (drive, pc);
rq->flags = REQ_SPECIAL;
spin_unlock_irq(cmd->host->host_lock);
(void) ide_do_drive_cmd (drive, rq, ide_end);
ide_do_drive_cmd (drive, rq, ide_end);
spin_lock_irq(cmd->host->host_lock);
return 0;
abort:
if (pc) kfree (pc);
if (rq) kfree (rq);
if (pc)
kfree (pc);
if (rq)
kfree (rq);
cmd->result = DID_ERROR << 16;
done(cmd);
......
include/linux/hdreg.h
View file @ b6e6f175
......@@ -81,18 +81,9 @@ struct hd_drive_task_hdr {
u8 low_cylinder;
u8 high_cylinder;
u8 device_head;
u8 command;
} __attribute__((packed));
struct hd_drive_hob_hdr {
u8 data;
u8 feature;
u8 sector_count;
u8 sector_number;
u8 low_cylinder;
u8 high_cylinder;
u8 device_head;
u8 control;
/* FXIME: Consider moving this out from here. */
u8 command;
} __attribute__((packed));
/*
......
include/linux/ide.h
View file @ b6e6f175
......@@ -253,11 +253,11 @@ typedef union {
unsigned all : 8; /* all of the bits together */
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
unsigned head : 4; /* always zeros here */
unsigned XXX_head : 4; /* always zeros here */
unsigned unit : 1; /* drive select number: 0/1 */
unsigned bit5 : 1; /* always 1 */
unsigned XXX_bit5 : 1; /* always 1 */
unsigned lba : 1; /* using LBA instead of CHS */
unsigned bit7 : 1; /* always 1 */
unsigned XXX_bit7 : 1; /* always 1 */
#elif defined(__BIG_ENDIAN_BITFIELD)
unsigned bit7 : 1;
unsigned lba : 1;
......@@ -270,29 +270,6 @@ typedef union {
} b;
} select_t;
typedef union {
unsigned all : 8; /* all of the bits together */
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
unsigned bit0 : 1;
unsigned nIEN : 1; /* device INTRQ to host */
unsigned SRST : 1; /* host soft reset bit */
unsigned bit3 : 1; /* ATA-2 thingy */
unsigned reserved456 : 3;
unsigned HOB : 1; /* 48-bit address ordering */
#elif defined(__BIG_ENDIAN_BITFIELD)
unsigned HOB : 1;
unsigned reserved456 : 3;
unsigned bit3 : 1;
unsigned SRST : 1;
unsigned nIEN : 1;
unsigned bit0 : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} control_t;
/*
* ATA/ATAPI device structure :
*/
......@@ -530,7 +507,7 @@ struct ata_channel {
* Register new hardware with ide
*/
extern int ide_register_hw(hw_regs_t *hw);
extern void ide_unregister(struct ata_channel *hwif);
extern void ide_unregister(struct ata_channel *);
struct ata_taskfile;
......@@ -670,11 +647,6 @@ struct ata_device *get_info_ptr(kdev_t i_rdev);
*/
ide_startstop_t restart_request(struct ata_device *);
/*
* This function is intended to be used prior to invoking ide_do_drive_cmd().
*/
extern void ide_init_drive_cmd(struct request *rq);
/*
* "action" parameter type for ide_do_drive_cmd() below.
*/
......@@ -698,7 +670,7 @@ extern void ide_end_drive_cmd(struct ata_device *, struct request *, u8);
struct ata_taskfile {
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
struct hd_drive_task_hdr hobfile;
int command_type;
ide_startstop_t (*prehandler)(struct ata_device *, struct request *);
ide_startstop_t (*handler)(struct ata_device *, struct request *);
......@@ -717,21 +689,18 @@ extern ide_startstop_t ata_taskfile(struct ata_device *,
extern ide_startstop_t recal_intr(struct ata_device *, struct request *);
extern ide_startstop_t task_no_data_intr(struct ata_device *, struct request *);
/* This is setting up all fields in args, which depend upon the command type.
*/
extern void ide_cmd_type_parser(struct ata_taskfile *args);
extern int ide_raw_taskfile(struct ata_device *, struct ata_taskfile *);
extern int ide_cmd_ioctl(struct ata_device *drive, unsigned long arg);
extern void ide_fix_driveid(struct hd_driveid *id);
extern int ide_config_drive_speed(struct ata_device *, byte);
extern byte eighty_ninty_three(struct ata_device *);
extern int system_bus_speed;
extern void ide_stall_queue(struct ata_device *, unsigned long);
extern int system_bus_speed;
/*
* CompactFlash cards and their brethern pretend to be removable hard disks,
* but they never have a slave unit, and they don't have doorlock mechanisms.
......@@ -873,5 +842,6 @@ extern void ata_mask(struct ata_device *);
extern int ata_status(struct ata_device *, u8, u8);
extern int ata_irq_enable(struct ata_device *, int);
extern void ata_reset(struct ata_channel *);
extern void ata_out_regfile(struct ata_device *, struct hd_drive_task_hdr *);
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7