[PATCH] various Kconfig fixes

Here are some Kconfig fixes:

- typo fixes
- unused token removes (empty or duplicated  'help')
- non ASCII characters replaces
- e-mail address and URL format corrections
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/arm/Kconfig

@@ -131,7 +131,7 @@ config ARCH_L7200
 	  <http://www.linkupsys.com/>
 
 	  If you have any questions or comments about the Linux kernel port
-	  to this board, send e-mail to sjhill@cotw.com.
+	  to this board, send e-mail to <sjhill@cotw.com>.
 
 config ARCH_PXA
 	bool "PXA2xx-based"
@@ -149,7 +149,7 @@ config ARCH_S3C2410
 	bool "Samsung S3C2410"
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
-	  BAST (http://www.simtec.co.uk/products/EB110ITX/), the IPAQ 1940 or
+	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
 	  the Samsung SMDK2410 development board (and derviatives).
 
 config ARCH_SHARK

arch/arm/mach-footbridge/Kconfig

@@ -26,7 +26,7 @@ config ARCH_PERSONAL_SERVER
 	  <http://www.crl.hpl.hp.com/projects/personalserver/>
 
 	  If you have any questions or comments about the  Compaq Personal
-	  Server, send e-mail to skiff@crl.dec.com.
+	  Server, send e-mail to <skiff@crl.dec.com>.
 
 config ARCH_EBSA285_ADDIN
 	bool "EBSA285 (addin mode)"

arch/arm/mach-ixp2000/Kconfig

@@ -14,21 +14,21 @@ config ARCH_ENP2611
 	help
 	  Say 'Y' here if you want your kernel to support the Radisys
 	  ENP2611 PCI network processing card. For more information on
-	  this card, see Documentation/arm/ENP2611.
+	  this card, see <file:Documentation/arm/ENP2611>.
 
 config ARCH_IXDP2400
 	bool "Support Intel IXDP2400"
 	help
 	  Say 'Y' here if you want your kernel to support the Intel
 	  IXDP2400 reference platform. For more information on
-	  this platform, see Documentation/arm/IXP2000.
+	  this platform, see <file:Documentation/arm/IXP2000>.
 
 config ARCH_IXDP2800
 	bool "Support Intel IXDP2800"
 	help
 	  Say 'Y' here if you want your kernel to support the Intel
 	  IXDP2800 reference platform. For more information on
-	  this platform, see Documentation/arm/IXP2000.
+	  this platform, see <file:Documentation/arm/IXP2000>.
 
 config ARCH_IXDP2X00
 	bool
@@ -40,14 +40,14 @@ config ARCH_IXDP2401
 	help
 	  Say 'Y' here if you want your kernel to support the Intel
 	  IXDP2401 reference platform. For more information on
-	  this platform, see Documentation/arm/IXP2000.
+	  this platform, see <file:Documentation/arm/IXP2000>.
 
 config ARCH_IXDP2801
 	bool "Support Intel IXDP2801"
 	help
 	  Say 'Y' here if you want your kernel to support the Intel
 	  IXDP2801 reference platform. For more information on
-	  this platform, see Documentation/arm/IXP2000.
+	  this platform, see <file:Documentation/arm/IXP2000>.
 
 config ARCH_IXDP2X01
 	bool

arch/arm/mach-ixp4xx/Kconfig

@@ -13,28 +13,28 @@ config ARCH_AVILA
 	help
 	  Say 'Y' here if you want your kernel to support the Gateworks
 	  Avila Network Platform. For more information on this platform,
-	  see Documentation/arm/IXP4xx.
+	  see <file:Documentation/arm/IXP4xx>.
 
 config ARCH_ADI_COYOTE
 	bool "Coyote"
 	help
 	  Say 'Y' here if you want your kernel to support the ADI 
 	  Engineering Coyote Gateway Reference Platform. For more
-	  information on this platform, see Documentation/arm/IXP4xx.
+	  information on this platform, see <file:Documentation/arm/IXP4xx>.
 
 config ARCH_IXDP425
 	bool "IXDP425"
 	help
 	  Say 'Y' here if you want your kernel to support Intel's 
 	  IXDP425 Development Platform (Also known as Richfield).  
-	  For more information on this platform, see Documentation/arm/IXP4xx.
+	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
 config MACH_IXDPG425
 	bool "IXDPG425"
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDPG425 Development Platform (Also known as Montajade).
-	  For more information on this platform, see Documentation/arm/IXP4xx.
+	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
 config MACH_IXDP465
 	bool "IXDP465"
@@ -59,7 +59,7 @@ config ARCH_PRPMC1100
 	help
 	  Say 'Y' here if you want your kernel to support the Motorola
 	  PrPCM1100 Processor Mezanine Module. For more information on
-	  this platform, see Documentation/arm/IXP4xx.
+	  this platform, see <file:Documentation/arm/IXP4xx>.
 
 #
 # Avila and IXDP share the same source for now. Will change in future
@@ -87,7 +87,7 @@ config IXP4XX_INDIRECT_PCI
           1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
              To access PCI via this space, we simply ioremap() the BAR
              into the kernel and we can use the standard read[bwl]/write[bwl]
-             macros. This is the preffered method due to speed but it
+             macros. This is the preferred method due to speed but it
              limits the system to just 64MB of PCI memory. This can be 
              problamatic if using video cards and other memory-heavy devices.
           

arch/arm/mach-s3c2410/Kconfig

@@ -41,7 +41,7 @@ config MACH_RX3715
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
 
-	  See http://www.handhelds.org/projects/rx3715.html for more
+	  See <http://www.handhelds.org/projects/rx3715.html> for more
 	  information on this project
 
 endmenu
@@ -77,7 +77,7 @@ config S3C2410_DMA_DEBUG
 	  to the kernel log, at priority KERN_DEBUG.
 
 	  Note, it is easy to create and fill the log buffer in a small
-	  amount of time, as well as using an significant percantage of
+	  amount of time, as well as using an significant percentage of
 	  the CPU time doing so.
 
 
@@ -115,9 +115,9 @@ config S3C2410_LOWLEVEL_UART_PORT
 	  Choice of which UART port to use for the low-level messages,
 	  such as the `Uncompressing...` at start time. The value of
 	  this configuration should be between zero and two. The port
-	  must have been initalised by the boot-loader before use.
+	  must have been initialised by the boot-loader before use.
 
 	  Note, this does not affect the port used by the debug messages,
-	  which is a seperate configuration.
+	  which is a separate configuration.
 
 endif

arch/arm/mm/Kconfig

@@ -394,7 +394,7 @@ config CPU_DCACHE_WRITETHROUGH
 	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
 	default y if CPU_ARM925T
 	help
-	  Say Y here to use the data cache in writethough mode. Unless you
+	  Say Y here to use the data cache in writethrough mode. Unless you
 	  specifically require this or are unsure, say N.
 
 config CPU_CACHE_ROUND_ROBIN

arch/arm26/Kconfig

@@ -225,4 +225,3 @@ source "security/Kconfig"
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
-

arch/cris/arch-v10/drivers/Kconfig

@@ -557,7 +557,7 @@ config ETRAX_IDE
 	select DMA_NONPCI
 	help
 	  Enable this to get support for ATA/IDE.
-	  You can't use parallell ports or SCSI ports
+	  You can't use paralell ports or SCSI ports
 	  at the same time.
 
 

arch/i386/Kconfig

@@ -842,7 +842,6 @@ config EFI
 	depends on ACPI
 	default n
 	---help---
-
 	This enables the the kernel to boot on EFI platforms using
 	system configuration information passed to it from the firmware.
 	This also enables the kernel to use any EFI runtime services that are

arch/i386/kernel/cpu/cpufreq/Kconfig

@@ -175,7 +175,7 @@ config X86_CPUFREQ_NFORCE2
 	depends on CPU_FREQ && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for FSB changing on nVidia nForce2
-	  plattforms.
+	  platforms.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 

arch/m68k/Kconfig

@@ -385,8 +385,8 @@ config STRAM_SWAP
 	bool "Support for ST-RAM as swap space"
 	depends on ATARI && BROKEN
 	---help---
-	  Some Atari 68k macines (including the 520STF and 1020STE) divide
-	  their addressible memory into ST and TT sections.  The TT section
+	  Some Atari 68k machines (including the 520STF and 1020STE) divide
+	  their addressable memory into ST and TT sections.  The TT section
 	  (up to 512MB) is the main memory; the ST section (up to 4MB) is
 	  accessible to the built-in graphics board, runs slower, and is
 	  present mainly for backward compatibility with older machines.

arch/ppc/8xx_io/Kconfig

@@ -10,7 +10,7 @@ config SCC_ENET
 	depends on NET_ETHERNET
 	help
 	  Enable Ethernet support via the Motorola MPC8xx serial
-	  commmunications controller.
+	  communications controller.
 
 choice
 	prompt "SCC used for Ethernet"

arch/ppc/Kconfig

@@ -326,7 +326,7 @@ config RPXLITE
 
 	  HERMES:
 	  Hermes-Pro ISDN/LAN router with integrated 8 x hub
-	  Manufacturer: Multidata Gesellschaft für Datentechnik und Informatik
+	  Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
 	  <http://www.multidata.de/>
 	  Date of Release: 2000 (?)
 	  End of life: -

arch/ppc64/Kconfig

@@ -92,7 +92,7 @@ config PPC_MAPLE
 	default n
 	help
           This option enables support for the Maple 970FX Evaluation Board.
-	  For more informations, refer to http://www.970eval.com
+	  For more informations, refer to <http://www.970eval.com>
 
 config PPC
 	bool

arch/sh/Kconfig

@@ -41,25 +41,25 @@ config SH_SOLUTION_ENGINE
 	bool "SolutionEngine"
 	help
 	  Select SolutionEngine if configuring for a Hitachi SH7709
-	  or SH7750 evalutation board.
+	  or SH7750 evaluation board.
 
 config SH_7751_SOLUTION_ENGINE
 	bool "SolutionEngine7751"
 	help
 	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-	  evalutation board.
+	  evaluation board.
 
 config SH_7300_SOLUTION_ENGINE
 	bool "SolutionEngine7300"
 	help
 	  Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V)
-	  evalutation board.
+	  evaluation board.
 
 config SH_73180_SOLUTION_ENGINE
        bool "SolutionEngine73180"
        help
          Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3)
-         evalutation board.
+         evaluation board.
 
 config SH_7751_SYSTEMH
 	bool "SystemH7751R"

arch/um/Kconfig

@@ -90,7 +90,7 @@ config NET
 	should consider updating your networking tools too because changes
 	in the kernel and the tools often go hand in hand. The tools are
 	contained in the package net-tools, the location and version number
-	of which are given in Documentation/Changes.
+	of which are given in <file:Documentation/Changes>.
 
 	For a general introduction to Linux networking, it is highly
 	recommended to read the NET-HOWTO, available from
@@ -130,7 +130,7 @@ config HPPFS
 	by removing or changing anything in /proc which gives away the
 	identity of a UML.
 
-	See http://user-mode-linux.sf.net/hppfs.html for more information.
+	See <http://user-mode-linux.sf.net/hppfs.html> for more information.
 
 	You only need this if you are setting up a UML honeypot.  Otherwise,
 	it is safe to say 'N' here.

crypto/Kconfig

@@ -77,7 +77,7 @@ config CRYPTO_WP512
 	  Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard
 
 	  See also:
-	  http://planeta.terra.com.br/informatica/paulobarreto/WhirlpoolPage.html
+	  <http://planeta.terra.com.br/informatica/paulobarreto/WhirlpoolPage.html>
 
 config CRYPTO_DES
 	tristate "DES and Triple DES EDE cipher algorithms"
@@ -102,7 +102,7 @@ config CRYPTO_BLOWFISH
 	  designed for use on "large microprocessors".
 	  
 	  See also:
-	  http://www.schneier.com/blowfish.html
+	  <http://www.schneier.com/blowfish.html>
 
 config CRYPTO_TWOFISH
 	tristate "Twofish cipher algorithm"
@@ -116,7 +116,7 @@ config CRYPTO_TWOFISH
 	  bits.
 	  
 	  See also:
-	  http://www.schneier.com/twofish.html
+	  <http://www.schneier.com/twofish.html>
 
 config CRYPTO_SERPENT
 	tristate "Serpent cipher algorithm"
@@ -129,7 +129,7 @@ config CRYPTO_SERPENT
 	  variant of Serpent for compatibility with old kerneli code.
 
 	  See also:
-	  http://www.cl.cam.ac.uk/~rja14/serpent.html
+	  <http://www.cl.cam.ac.uk/~rja14/serpent.html>
 
 config CRYPTO_AES
 	tristate "AES cipher algorithms"
@@ -149,7 +149,7 @@ config CRYPTO_AES
 
 	  The AES specifies three key sizes: 128, 192 and 256 bits	  
 
-	  See http://csrc.nist.gov/CryptoToolkit/aes/ for more information.
+	  See <http://csrc.nist.gov/CryptoToolkit/aes/> for more information.
 
 config CRYPTO_AES_586
 	tristate "AES cipher algorithms (i586)"
@@ -169,7 +169,7 @@ config CRYPTO_AES_586
 
 	  The AES specifies three key sizes: 128, 192 and 256 bits	  
 
-	  See http://csrc.nist.gov/encryption/aes/ for more information.
+	  See <http://csrc.nist.gov/encryption/aes/> for more information.
 
 config CRYPTO_CAST5
 	tristate "CAST5 (CAST-128) cipher algorithm"
@@ -221,7 +221,7 @@ config CRYPTO_KHAZAD
 	  on 32-bit processors.  Khazad uses an 128 bit key size.
 
 	  See also:
-	  http://planeta.terra.com.br/informatica/paulobarreto/KhazadPage.html
+	  <http://planeta.terra.com.br/informatica/paulobarreto/KhazadPage.html>
 
 config CRYPTO_ANUBIS
 	tristate "Anubis cipher algorithm"
@@ -234,8 +234,8 @@ config CRYPTO_ANUBIS
 	  in the NESSIE competition.
 	  
 	  See also:
-	  https://www.cosic.esat.kuleuven.ac.be/nessie/reports/
-	  http://planeta.terra.com.br/informatica/paulobarreto/AnubisPage.html
+	  <https://www.cosic.esat.kuleuven.ac.be/nessie/reports/>
+	  <http://planeta.terra.com.br/informatica/paulobarreto/AnubisPage.html>
 
 
 config CRYPTO_DEFLATE

drivers/acpi/Kconfig

@@ -20,7 +20,7 @@ config ACPI
 	  kernel by about 70K.
 
 	  Linux ACPI provides a robust functional replacement for several 
-	  legacy configuration and power management intefaces, including 
+	  legacy configuration and power management interfaces, including
 	  the Plug-and-Play BIOS specification (PnP BIOS), the 
 	  MultiProcessor Specification (MPS), and the Advanced Power 
 	  Management (APM) specification.  If both ACPI and APM support 
@@ -209,8 +209,8 @@ config ACPI_IBM
 	  This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
 	  support for Fn-Fx key combinations, Bluetooth control, video
 	  output switching, ThinkLight control, UltraBay eject and more.
-	  For more information about this driver see Documentation/ibm-acpi.txt
-	  and http://ibm-acpi.sf.net/ .
+	  For more information about this driver see <file:Documentation/ibm-acpi.txt>
+	  and <http://ibm-acpi.sf.net/> .
 
 	  If you have an IBM ThinkPad laptop, say Y or M here.
 

drivers/block/Kconfig

@@ -170,7 +170,7 @@ config CISS_SCSI_TAPE
 	help
 	  When enabled (Y), this option allows SCSI tape drives and SCSI medium
 	  changers (tape robots) to be accessed via a Compaq 5xxx array 
-	  controller.  (See Documentation/cciss.txt for more details.)
+	  controller.  (See <file:Documentation/cciss.txt> for more details.)
 
 	  "SCSI support" and "SCSI tape support" must also be enabled for this 
 	  option to work.
@@ -196,7 +196,7 @@ config BLK_DEV_UMEM
 	---help---
 	  Saying Y here will include support for the MM5415 family of
 	  battery backed (Non-volatile) RAM cards.
-	  http://www.umem.com/
+	  <http://www.umem.com/>
 
 	  The cards appear as block devices that can be partitioned into
 	  as many as 15 partitions.

drivers/block/paride/Kconfig

@@ -119,7 +119,7 @@ config PARIDE_BPCK
 	  before 1999 were Series 5) Series 5 drives will NOT always have the
 	  Series noted on the bottom of the drive. Series 6 drivers will.
 
-	  In other words, if your BACKPACK drive dosen't say "Series 6" on the
+	  In other words, if your BACKPACK drive doesn't say "Series 6" on the
 	  bottom, enable this option.
 
 	  If you chose to build PARIDE support into your kernel, you may

drivers/cdrom/Kconfig

@@ -18,7 +18,7 @@ config CD_NO_IDESCSI
 	  have, say Y and find out whether you have one of the following
 	  drives.
 
-	  For each of these drivers, a file Documentation/cdrom/{driver_name}
+	  For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
 	  exists. Especially in cases where you do not know exactly which kind
 	  of drive you have you should read there. Most of these drivers use a
 	  file drivers/cdrom/{driver_name}.h where you can define your

drivers/char/ipmi/Kconfig

@@ -12,7 +12,7 @@ config IPMI_HANDLER
          IPMI is a standard for managing sensors (temperature,
          voltage, etc.) in a system.
 
-         See Documentation/IPMI.txt for more details on the driver.
+         See <file:Documentation/IPMI.txt> for more details on the driver.
 
 	 If unsure, say N.
 

drivers/firmware/Kconfig

@@ -30,10 +30,10 @@ config EFI_VARS
 	  Note that using this driver in concert with efibootmgr requires
 	  at least test release version 0.5.0-test3 or later, which is
 	  available from Matt Domsch's website located at:
-	  http://linux.dell.com/efibootmgr/testing/efibootmgr-0.5.0-test3.tar.gz
+	  <http://linux.dell.com/efibootmgr/testing/efibootmgr-0.5.0-test3.tar.gz>
 
 	  Subsequent efibootmgr releases may be found at:
-	  http://linux.dell.com/efibootmgr
+	  <http://linux.dell.com/efibootmgr>
 
 config EFI_PCDP
 	bool "Console device selection via EFI PCDP or HCDP table"

drivers/i2c/busses/Kconfig

@@ -420,7 +420,7 @@ config I2C_STUB
 	  especially for certain kinds of sensor chips.
 
 	  If you do build this module, be sure to read the notes and warnings
-	  in Documentation/i2c/i2c-stub.
+	  in <file:Documentation/i2c/i2c-stub>.
 
 	  If you don't know what to do here, definitely say N.
 
@@ -429,7 +429,6 @@ config I2C_VIA
 	depends on I2C && PCI && EXPERIMENTAL
 	select I2C_ALGOBIT
 	help
-
 	  If you say yes to this option, support will be included for the VIA
           82C586B I2C interface
 
@@ -440,7 +439,6 @@ config I2C_VIAPRO
 	tristate "VIA 82C596/82C686/823x"
 	depends on I2C && PCI && EXPERIMENTAL
 	help
-
 	  If you say yes to this option, support will be included for the VIA
 	  82C596/82C686/823x I2C interfaces.  Specifically, the following 
 	  chipsets are supported:
@@ -460,7 +458,6 @@ config I2C_VOODOO3
 	depends on I2C && PCI && EXPERIMENTAL
 	select I2C_ALGOBIT
 	help
-
 	  If you say yes to this option, support will be included for the
 	  Voodoo 3 I2C interface.
 

drivers/input/Kconfig

@@ -32,7 +32,7 @@ config INPUT_MOUSEDEV
 	  Say Y here if you want your mouse to be accessible as char devices
 	  13:32+ - /dev/input/mouseX and 13:63 - /dev/input/mice as an
 	  emulated IntelliMouse Explorer PS/2 mouse. That way, all user space
-	  programs (includung SVGAlib, GPM and X) will be able to use your
+	  programs (including SVGAlib, GPM and X) will be able to use your
 	  mouse.
 
 	  If unsure, say Y.

drivers/input/joystick/iforce/Kconfig

@@ -27,5 +27,6 @@ config JOYSTICK_IFORCE_232
 	  connected to your serial (COM) port.
 
 	  You will need an additional utility called inputattach, see
-	  Documentation/input/joystick.txt and ff.txt.
+	  <file:Documentation/input/joystick.txt>
+	  and <file:Documentation/input/ff.txt>.
 

drivers/input/misc/Kconfig

@@ -5,7 +5,6 @@ config INPUT_MISC
 	bool "Misc"
 	depends on INPUT
 	help
-
 	  Say Y here, and a list of miscellaneous input drivers will be displayed.
 	  Everything that didn't fit into the other categories is here. This option
 	  doesn't affect the kernel.

drivers/input/mouse/Kconfig

@@ -27,9 +27,9 @@ config MOUSE_PS2
 
 	  Synaptics TouchPad users might be interested in a specialized
 	  XFree86 driver at:
-		http://w1.894.telia.com/~u89404340/touchpad/index.html
-	  and a new verion of GPM at:
-		http://www.geocities.com/dt_or/gpm/gpm.html
+		<http://w1.894.telia.com/~u89404340/touchpad/index.html>
+	  and a new version of GPM at:
+		<http://www.geocities.com/dt_or/gpm/gpm.html>
 	  to take advantage of the advanced features of the touchpad.
 
 	  If unsure, say Y.

drivers/isdn/i4l/Kconfig

@@ -58,7 +58,7 @@ config ISDN_AUDIO
 	help
 	  If you say Y here, the modem-emulator will support a subset of the
 	  EIA Class 8 Voice commands. Using a getty with voice-support
-	  (mgetty+sendfax by gert@greenie.muc.de with an extension, available
+	  (mgetty+sendfax by <gert@greenie.muc.de> with an extension, available
 	  with the ISDN utility package for example), you will be able to use
 	  your Linux box as an ISDN-answering machine. Of course, this must be
 	  supported by the lowlevel driver also. Currently, the HiSax driver

drivers/isdn/tpam/Kconfig

@@ -11,5 +11,5 @@ config ISDN_DRV_TPAM
 	  to be downloaded into the card using a utility which is distributed
 	  separately from the Auvertech's web site: <http://www.auvertech.fr/>.
 
-	  Please redirect all support questions to support@auvertech.fr.
+	  Please redirect all support questions to <support@auvertech.fr>.
 

drivers/md/Kconfig

@@ -200,7 +200,7 @@ config DM_CRYPT
 
 	  Information on how to use dm-crypt can be found on
 
-	  http://www.saout.de/misc/dm-crypt/
+	  <http://www.saout.de/misc/dm-crypt/>
 
 	  To compile this code as a module, choose M here: the module will
 	  be called dm-crypt.

drivers/media/dvb/dibusb/Kconfig

@@ -6,7 +6,7 @@ config DVB_DIBUSB
 	select DVB_DIB3000MC
 	help
 	  Support for USB 1.1 and 2.0 DVB-T devices based on reference designs made by
-	  DiBcom (http://www.dibcom.fr).
+	  DiBcom (<http://www.dibcom.fr>).
 
 	  Devices supported by this driver:
 
@@ -27,7 +27,7 @@ config DVB_DIBUSB
 	  These devices can be understood as budget ones, they "only" deliver
 	  (a part of) the MPEG2 transport stream.
 
-	  A firmware is needed to get the device working. See Documentation/dvb/README.dibusb
+	  A firmware is needed to get the device working. See <file:Documentation/dvb/README.dibusb>
 	  details.
 
 	  Say Y if you own such a device and want to use it. You should build it as

drivers/misc/Kconfig

@@ -22,7 +22,7 @@ config IBM_ASM
 	  
 	  WARNING: This software may not be supported or function
 	  correctly on your IBM server. Please consult the IBM ServerProven
-	  website http://www.pc.ibm/ww/eserver/xseries/serverproven for
+	  website <http://www.pc.ibm/ww/eserver/xseries/serverproven> for
 	  information on the specific driver level and support statement
 	  for your IBM server.
 

drivers/mtd/maps/Kconfig

@@ -354,7 +354,7 @@ config MTD_CFI_FLAGADM
 	tristate "CFI Flash device mapping on FlagaDM"
 	depends on PPC32 && 8xx && MTD_CFI
 	help
-	  Mapping for the Flaga digital module. If you dont have one, ignore
+	  Mapping for the Flaga digital module. If you don't have one, ignore
 	  this setting.
 
 config MTD_BEECH
@@ -417,7 +417,7 @@ config MTD_CSTM_MIPS_IXX
 	tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
 	depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
 	help
-	  This provides a mapping driver for the Integrated Tecnology
+	  This provides a mapping driver for the Integrated Technology
 	  Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
 	  Reference Board. It provides the necessary addressing, length,
 	  buswidth, vpp code and addition setup of the flash device for

drivers/net/Kconfig

@@ -1412,13 +1412,13 @@ config E100
 
 	  Use the above information and the Adapter & Driver ID Guide at:
 
-	  http://support.intel.com/support/network/adapter/pro100/21397.htm
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 
           to identify the adapter.
 
 	  For the latest Intel PRO/100 network driver for Linux, see:
 
-	  http://appsr.intel.com/scripts-df/support_intel.asp
+	  <http://appsr.intel.com/scripts-df/support_intel.asp>
 
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/e100.txt>.
@@ -1659,7 +1659,7 @@ config TLAN
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called tlan.
 
-	  Please email feedback to  torben.mathiasen@compaq.com.
+	  Please email feedback to <torben.mathiasen@compaq.com>.
 
 config VIA_RHINE
 	tristate "VIA Rhine support"
@@ -2049,14 +2049,14 @@ config SK98LIN
 	  The dual link adapters support link-failover and dual port features.
 	  Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support 
 	  the scatter-gather functionality with sendfile(). Please refer to 
-	  Documentation/networking/sk98lin.txt for more information about
+	  <file:Documentation/networking/sk98lin.txt> for more information about
 	  optional driver parameters.
 	  Questions concerning this driver may be addressed to:
-	      linux@syskonnect.de
+	      <linux@syskonnect.de>
 	  
 	  If you want to compile this driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read Documentation/kbuild/modules.txt. The module will
+	  say M here and read <file:Documentation/kbuild/modules.txt>. The module will
 	  be called sk98lin. This is recommended.
 
 config VIA_VELOCITY
@@ -2265,7 +2265,7 @@ config SKFP
 	  the driver.
 
 	  Questions concerning this driver can be addressed to:
-	  linux@syskonnect.de
+	  <linux@syskonnect.de>
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called skfp.  This is recommended.
@@ -2461,7 +2461,7 @@ config PPPOE
 
 	  This driver requires the latest version of pppd from the CVS
 	  repository at cvs.samba.org.  Alternatively, see the 
-	  RoaringPenguin package (http://www.roaringpenguin.com/pppoe)
+	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
 	  which contains instruction on how to use this driver (under 
 	  the heading "Kernel mode PPPoE").
 
@@ -2589,5 +2589,5 @@ config NETCONSOLE
 	depends on NETDEVICES && EXPERIMENTAL
 	---help---
 	If you want to log kernel messages over the network, enable this.
-	See Documentation/networking/netconsole.txt for details.
+	See <file:Documentation/networking/netconsole.txt> for details.
 

drivers/net/arcnet/Kconfig

@@ -110,7 +110,7 @@ config ARCNET_RIM_I
 	  This is yet another chipset driver for the COM90xx cards, but this
 	  time only using memory-mapped mode, and no IO ports at all. This
 	  driver is completely untested, so if you have one of these cards,
-	  please mail dwmw2@infradead.org, especially if it works!
+	  please mail <dwmw2@infradead.org>, especially if it works!
 
 	  To compile this driver as a module, choose M here and read
 	  <file:Documentation/networking/net-modules.txt>.  The module will

drivers/net/wan/Kconfig

@@ -109,7 +109,7 @@ config LANMEDIA
 	  V.24, V.35 or V.36 interface) to your Linux box.
 
 	  - LMC 1200 with on board DSU board allows you to connect your Linux
-	  box dirrectly to a T1 or E1 circuit.
+	  box directly to a T1 or E1 circuit.
 
 	  - LMC 5200 board provides a HSSI interface capable of running up to
 	  52 Mbits per second.
@@ -459,7 +459,7 @@ config WANPIPE_FR
 	depends on VENDOR_SANGOMA
 	help
 	  Connect a WANPIPE card to a Frame Relay network, or use Frame Felay
-	  API to develope custom applications.
+	  API to develop custom applications.
 
 	  Contains the Ethernet Bridging over Frame Relay feature, where
 	  a WANPIPE frame relay link can be directly connected to the Linux

drivers/net/wireless/Kconfig

@@ -235,7 +235,7 @@ config ATMEL
         one of these, you will need to provide a firmware image
         to be loaded into the card by the driver. The Atmel
         firmware package can be downloaded from
-        http://www.thekelleys.org.uk/atmel
+        <http://www.thekelleys.org.uk/atmel>
 
 config PCI_ATMEL
       tristate "Atmel at76c506 PCI cards"

drivers/pci/Kconfig

@@ -25,7 +25,7 @@ config PCI_LEGACY_PROC
 
 	  lspci can provide the same data, as well as much more. lspci is a part of
 	  the pci-utils package, which should be installed by your distribution. 
-	  See Documentation/Changes for information on where to get the latest 
+	  See <file:Documentation/Changes> for information on where to get the latest
 	  version. 
 
 	  When in doubt, say N.

drivers/pnp/pnpbios/Kconfig

@@ -30,7 +30,7 @@ config PNPBIOS_PROC_FS
 	  able to directly access the PNPBIOS.  This includes resource
 	  allocation, ESCD, and other PNPBIOS services.  Using this
 	  interface is potentially dangerous because the PNPBIOS driver will
-	  not be notified of any resource changes made by writting directly.
+	  not be notified of any resource changes made by writing directly.
 	  Also some buggy systems will fault when accessing certain features
 	  in the PNPBIOS /proc interface (e.g. "boot" configs).
 

drivers/s390/Kconfig

@@ -162,7 +162,7 @@ config S390_TAPE_BLOCK
 	  devices using the block device interface.  This interface is similar
 	  to CD-ROM devices on other platforms.  The tapes can only be
 	  accessed read-only when using this interface.  Have a look at
-	  Documentation/s390/TAPE for further information about creating
+	  <file:Documentation/s390/TAPE> for further information about creating
 	  volumes for and using this interface.  It is safe to say "Y" here.
 
 comment "S/390 tape hardware support"

drivers/scsi/Kconfig

@@ -791,7 +791,7 @@ config SCSI_IPS
 	  See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
 	  for more information.  If this driver does not work correctly
 	  without modification please contact the author by email at
-	  ipslinux@adaptec.com.
+	  <ipslinux@adaptec.com>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ips.
@@ -1494,7 +1494,7 @@ config SCSI_DEBUG
 	  host adapter with one dummy SCSI disk. Each dummy disk uses kernel
 	  RAM as storage (i.e. it is a ramdisk). To save space when multiple
 	  dummy disks are simulated, they share the same kernel RAM for 
-	  their storage. See http://www.torque.net/sg/sdebug.html for more
+	  their storage. See <http://www.torque.net/sg/sdebug.html> for more
 	  information. This driver is primarily of use to those testing the
 	  SCSI and block subsystems. If unsure, say N.
 
@@ -1785,7 +1785,7 @@ config ZFCP
 
           This driver is also available as a module. This module will be
           called zfcp. If you want to compile it as a module, say M here
-          and read Documentation/modules.txt.
+          and read <file:Documentation/modules.txt>.
 
 endmenu
 

drivers/serial/Kconfig

@@ -321,7 +321,7 @@ config SERIAL_UART00
 	select SERIAL_CORE
 	help
 	  Say Y here if you want to use the hard logic uart on Excalibur. This
-	  driver also supports soft logic implentations of this uart core.
+	  driver also supports soft logic implementations of this uart core.
 
 config SERIAL_UART00_CONSOLE
 	bool "Support for console on Excalibur serial port"
@@ -529,7 +529,6 @@ config SERIAL_IP22_ZILOG_CONSOLE
 	bool "Console on IP22 Zilog8530 serial port"
 	depends on SERIAL_IP22_ZILOG=y
 	select SERIAL_CORE_CONSOLE
-	help
 
 config V850E_UART
 	bool "NEC V850E on-chip UART support"
@@ -641,7 +640,7 @@ config SERIAL_LH7A40X
 	  Sharp LH7A40X series CPUs.  Choose Y or M.
 
 config SERIAL_LH7A40X_CONSOLE
-	bool "Support for connsole on Sharp LH7A40X serial port"
+	bool "Support for console on Sharp LH7A40X serial port"
 	depends on SERIAL_LH7A40X=y
 	select SERIAL_CORE_CONSOLE
 	help

drivers/usb/input/Kconfig

@@ -200,7 +200,7 @@ config USB_EGALAX
 	  The driver has been tested on a Xenarc 700TSV monitor
 	  with eGalax touchscreen.
 
-	  Have a look at http://linux.chapter7.ch/touchkit/ for
+	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 	  a usage description and the required user-space stuff.
 
 	  To compile this driver as a module, choose M here: the
@@ -228,7 +228,7 @@ config USB_ATI_REMOTE
 	  These are RF remotes with USB receivers. 
 	  The ATI remote comes with many of ATI's All-In-Wonder video cards.
 	  The X10 "Lola" remote is available at:
-	     http://www.x10.com/products/lola_sg1.htm
+	     <http://www.x10.com/products/lola_sg1.htm>
 	  This driver provides mouse pointer, left and right mouse buttons, 
 	  and maps all the other remote buttons to keypress events.
 	  

drivers/usb/misc/Kconfig

@@ -127,7 +127,6 @@ config USB_TEST
 	tristate "USB testing driver (DEVELOPMENT)"
 	depends on USB && USB_DEVICEFS && EXPERIMENTAL
 	help
-
 	  This driver is for testing host controller software.  It is used
 	  with specialized device firmware for regression and stress testing,
 	  to help prevent problems from cropping up with "real" drivers.

drivers/usb/storage/Kconfig

@@ -47,7 +47,7 @@ config USB_STORAGE_RW_DETECT
 
 	  Saying Y here allows these commands to be sent to a USB device.
 	  If you find a device this doesn't work for, switch to N and let
-	  us know at usb-storage@lists.one-eyed-alien.net
+	  us know at <usb-storage@lists.one-eyed-alien.net>
 
 	  If you say N here, the kernel will assume that all disk-like USB
 	  devices are write-enabled.

drivers/video/Kconfig

@@ -836,7 +836,7 @@ config FB_SIS
 	depends on FB && PCI
 	help
 	  This is the frame buffer device driver for the SiS 300, 315 and
-	  330 series VGA chipsets. Specs available at http://www.sis.com
+	  330 series VGA chipsets. Specs available at <http://www.sis.com>
 
 	  To compile this driver as a module, choose M here; the module
 	  will be called sisfb.
@@ -905,7 +905,7 @@ config FB_VOODOO1
 
 	  WARNING: Do not use any application that uses the 3D engine
 	  (namely glide) while using this driver.
-	  Please read the file Documentation/fb/README-sstfb.txt for supported
+	  Please read the <file:Documentation/fb/README-sstfb.txt> for supported
 	  options and other important info  support.
 
 config FB_TRIDENT
@@ -1080,7 +1080,7 @@ config FB_PXA_PARAMETERS
 	  single model of flatpanel then you can safely leave this
 	  option disabled.
 
-	  Documentation/fb/pxafb.txt describes the available parameters.
+	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
 
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"

fs/Kconfig

@@ -250,7 +250,7 @@ config JFS_FS
 	select NLS
 	help
 	  This is a port of IBM's Journaled Filesystem .  More information is
-	  available in the file Documentation/filesystems/jfs.txt.
+	  available in the file <file:Documentation/filesystems/jfs.txt>.
 
 	  If you do not intend to use the JFS filesystem, say N.
 
@@ -1027,10 +1027,10 @@ config BEFS_FS
 	help
 	  The BeOS File System (BeFS) is the native file system of Be, Inc's
 	  BeOS. Notable features include support for arbitrary attributes
-	  on files and directories, and database-like indices on selected
+	  on files and directories, and database-like indeces on selected
 	  attributes. (Also note that this driver doesn't make those features
 	  available at this time). It is a 64 bit filesystem, so it supports
-	  extreemly large volumes and files.
+	  extremly large volumes and files.
 
 	  If you use this filesystem, you should also say Y to at least one
 	  of the NLS (native language support) options below.
@@ -1180,7 +1180,7 @@ config JFFS2_ZLIB
         help
           Zlib is designed to be a free, general-purpose, legally unencumbered,
           lossless data-compression library for use on virtually any computer 
-          hardware and operating system. See http://www.gzip.org/zlib/ for
+          hardware and operating system. See <http://www.gzip.org/zlib/> for
           further information.
           
           Say 'Y' if unsure.
@@ -1205,7 +1205,7 @@ choice
         depends on JFFS2_FS
         help
           You can set here the default compression mode of JFFS2 from 
-          the avaiable compression modes. Don't touch if unsure.
+          the available compression modes. Don't touch if unsure.
 
 config JFFS2_CMODE_NONE
         bool "no compression"
@@ -1782,7 +1782,7 @@ config AFS_FS
 	  If you say Y here, you will get an experimental Andrew File System
 	  driver. It currently only supports unsecured read-only AFS access.
 
-	  See Documentation/filesystems/afs.txt for more intormation.
+	  See <file:Documentation/filesystems/afs.txt> for more intormation.
 
 	  If unsure, say N.
 

kernel/power/Kconfig

@@ -48,7 +48,7 @@ config SOFTWARE_SUSPEND
 	  involved in suspending. Also in this case there is a risk that buffers
 	  on disk won't match with saved ones.
 
-	  For more information take a look at Documentation/power/swsusp.txt.
+	  For more information take a look at <file:Documentation/power/swsusp.txt>.
 
 config PM_STD_PARTITION
 	string "Default resume partition"

net/Kconfig

@@ -621,7 +621,7 @@ config NET_PKTGEN
 	  stress testing and performance analysis.  If you don't understand
 	  what was just said, you don't need it: say N.
 
-	  Documentation on how to use the packet generaor can be found
+	  Documentation on how to use the packet generator can be found
 	  at <file:Documentation/networking/pktgen.txt>.
 
 	  To compile this code as a module, choose M here: the

net/ipv4/netfilter/Kconfig

@@ -48,7 +48,7 @@ config IP_NF_CT_PROTO_SCTP
 	  be able to do state tracking on SCTP connections.
 
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt.  If unsure, say `N'.
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
 
 config IP_NF_FTP
 	tristate "FTP protocol support"
@@ -313,7 +313,7 @@ config IP_NF_MATCH_ADDRTYPE
 	  eg. UNICAST, LOCAL, BROADCAST, ...
 	
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt.  If unsure, say `N'.
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
 
 config IP_NF_MATCH_REALM
 	tristate  'realm match support'
@@ -321,13 +321,13 @@ config IP_NF_MATCH_REALM
 	select NET_CLS_ROUTE
 	help
 	  This option adds a `realm' match, which allows you to use the realm
-	  key from the routing subsytem inside iptables.
+	  key from the routing subsystem inside iptables.
 	
 	  This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option 
 	  in tc world.
 	
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt.  If unsure, say `N'.
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
 
 config IP_NF_MATCH_SCTP
 	tristate  'SCTP protocol match support'
@@ -338,7 +338,7 @@ config IP_NF_MATCH_SCTP
 	  and SCTP chunk types.
 
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt.  If unsure, say `N'.
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
 
 config IP_NF_MATCH_COMMENT
 	tristate  'comment match support'
@@ -348,7 +348,7 @@ config IP_NF_MATCH_COMMENT
 	  comments in your iptables ruleset.
 
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt.  If unsure, say `N'.
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
 
 config IP_NF_MATCH_CONNMARK
 	tristate  'Connection mark match support'
@@ -358,7 +358,7 @@ config IP_NF_MATCH_CONNMARK
 	  connection mark value previously set for the session by `CONNMARK'. 
 	
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt.  The module will be called
+	  <file:Documentation/modules.txt>.  The module will be called
 	  ipt_connmark.o.  If unsure, say `N'.
 
 config IP_NF_MATCH_HASHLIMIT
@@ -625,7 +625,7 @@ config IP_NF_TARGET_CONNMARK
 	  affects the connection mark value rather than the packet mark value.
 	
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt.  The module will be called
+	  <file:Documentation/modules.txt>.  The module will be called
 	  ipt_CONNMARK.o.  If unsure, say `N'.
 
 config IP_NF_TARGET_CLUSTERIP
@@ -649,7 +649,6 @@ config IP_NF_RAW
 	
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/modules.txt>.  If unsure, say `N'.
-	  help
 
 config IP_NF_TARGET_NOTRACK
 	tristate  'NOTRACK target support'

net/ipv6/netfilter/Kconfig

@@ -237,7 +237,6 @@ config IP6_NF_RAW
 	
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/modules.txt>.  If unsure, say `N'.
-	  help
 
 endmenu
 

net/irda/irnet/Kconfig

@@ -7,7 +7,7 @@ config IRNET
 	  called irnet.  IrNET is a PPP driver, so you will also need a
 	  working PPP subsystem (driver, daemon and config)...
 
-	  IrNET is an alternate way to tranfer TCP/IP traffic over IrDA.  It
+	  IrNET is an alternate way to transfer TCP/IP traffic over IrDA.  It
 	  uses synchronous PPP over a set of point to point IrDA sockets.  You
 	  can use it between Linux machine or with W2k.
 

security/Kconfig

@@ -80,7 +80,7 @@ config SECURITY_SECLVL
 	select CRYPTO_SHA1
 	help
 	  Implements BSD Secure Levels as an LSM.  See
-	  Documentation/seclvl.txt for instructions on how to use this
+	  <file:Documentation/seclvl.txt> for instructions on how to use this
 	  module.
 
 	  If you are unsure how to answer this question, answer N.

security/selinux/Kconfig

@@ -34,7 +34,7 @@ config SECURITY_SELINUX_BOOTPARAM_VALUE
 	  'selinux', which allows SELinux to be disabled at boot.  If this
 	  option is set to 0 (zero), the SELinux kernel parameter will
 	  default to 0, disabling SELinux at bootup.  If this option is
-	  set to 1 (one), the SELinux kernel paramater will default to 1,
+	  set to 1 (one), the SELinux kernel parameter will default to 1,
 	  enabling SELinux at bootup.
 
 	  If you are unsure how to answer this question, answer 1.

sound/oss/Kconfig

@@ -423,7 +423,7 @@ config MSNDPIN_MPU_IRQ
 	depends on MSNDPIN_NONPNP
 	default "0"
 	help
-	  Iinterrupt request number for the Kurzweil daughterboard
+	  Interrupt request number for the Kurzweil daughterboard
 	  synthesizer on MultiSound Pinnacle and Fiji sound cards.
 
 config MSNDPIN_IDE_IO0
@@ -1081,8 +1081,8 @@ config SOUND_RME96XX
 	depends on SOUND_PRIME!=n && PCI
 	help
 	  Say Y or M if you have a Hammerfall or Hammerfall light
-	  multichannel card from RME. If you want to acess advanced
-	  features of the card, read Documentation/sound/oss/rme96xx.
+	  multichannel card from RME. If you want to access advanced
+	  features of the card, read <file:Documentation/sound/oss/rme96xx>.
 
 config SOUND_AD1980
 	tristate "AD1980 front/back switch plugin"

sound/pci/Kconfig

@@ -54,7 +54,7 @@ config SND_AU8810
 
 	  Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
           3D support code is in place, but not yet useable. For more info, 
-          email the ALSA developer list, or mjander@users.sourceforge.net.
+          email the ALSA developer list, or <mjander@users.sourceforge.net>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-au8810.
@@ -68,7 +68,7 @@ config SND_AU8820
 	  Say Y here to include support for Aureal Vortex soundcards.
 
           Supported features: Hardware Mixer and SRC. For more info, email 
-          the ALSA developer list, or mjander@users.sourceforge.net.
+          the ALSA developer list, or <mjander@users.sourceforge.net>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-au8820.
@@ -83,7 +83,7 @@ config SND_AU8830
 
           Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
           3D support code is in place, but not yet useable. For more info, 
-          email the ALSA developer list, or mjander@users.sourceforge.net.
+          email the ALSA developer list, or <mjander@users.sourceforge.net>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-au8830.