Merge branch 'devicetree/next-console' into devicetree/next

arch/arm/boot/dts/versatile-ab.dts

@@ -15,6 +15,10 @@ aliases {
 		i2c0 = &i2c0;
 	};
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	memory {
 		reg = <0x0 0x08000000>;
 	};

arch/powerpc/platforms/powermac/feature.c

@@ -2805,25 +2805,20 @@ set_initial_features(void)
 		/* Enable GMAC for now for PCI probing. It will be disabled
 		 * later on after PCI probe
 		 */
-		np = of_find_node_by_name(NULL, "ethernet");
-		while(np) {
+		for_each_node_by_name(np, "ethernet")
 			if (of_device_is_compatible(np, "K2-GMAC"))
 				g5_gmac_enable(np, 0, 1);
-			np = of_find_node_by_name(np, "ethernet");
-		}
 
 		/* Enable FW before PCI probe. Will be disabled later on
 		 * Note: We should have a batter way to check that we are
 		 * dealing with uninorth internal cell and not a PCI cell
 		 * on the external PCI. The code below works though.
 		 */
-		np = of_find_node_by_name(NULL, "firewire");
-		while(np) {
+		for_each_node_by_name(np, "firewire") {
 			if (of_device_is_compatible(np, "pci106b,5811")) {
 				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
 				g5_fw_enable(np, 0, 1);
 			}
-			np = of_find_node_by_name(np, "firewire");
 		}
 	}
 #else /* CONFIG_POWER4 */
@@ -2834,13 +2829,11 @@ set_initial_features(void)
 		/* Enable GMAC for now for PCI probing. It will be disabled
 		 * later on after PCI probe
 		 */
-		np = of_find_node_by_name(NULL, "ethernet");
-		while(np) {
+		for_each_node_by_name(np, "ethernet") {
 			if (np->parent
 			    && of_device_is_compatible(np->parent, "uni-north")
 			    && of_device_is_compatible(np, "gmac"))
 				core99_gmac_enable(np, 0, 1);
-			np = of_find_node_by_name(np, "ethernet");
 		}
 
 		/* Enable FW before PCI probe. Will be disabled later on
@@ -2848,8 +2841,7 @@ set_initial_features(void)
 		 * dealing with uninorth internal cell and not a PCI cell
 		 * on the external PCI. The code below works though.
 		 */
-		np = of_find_node_by_name(NULL, "firewire");
-		while(np) {
+		for_each_node_by_name(np, "firewire") {
 			if (np->parent
 			    && of_device_is_compatible(np->parent, "uni-north")
 			    && (of_device_is_compatible(np, "pci106b,18") ||
@@ -2858,18 +2850,16 @@ set_initial_features(void)
 				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
 				core99_firewire_enable(np, 0, 1);
 			}
-			np = of_find_node_by_name(np, "firewire");
 		}
 
 		/* Enable ATA-100 before PCI probe. */
 		np = of_find_node_by_name(NULL, "ata-6");
-		while(np) {
+		for_each_node_by_name(np, "ata-6") {
 			if (np->parent
 			    && of_device_is_compatible(np->parent, "uni-north")
 			    && of_device_is_compatible(np, "kauai-ata")) {
 				core99_ata100_enable(np, 1);
 			}
-			np = of_find_node_by_name(np, "ata-6");
 		}
 
 		/* Switch airport off */

arch/powerpc/platforms/powermac/pci.c

@@ -698,7 +698,7 @@ static void __init fixup_nec_usb2(void)
 {
 	struct device_node *nec;
 
-	for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) {
+	for_each_node_by_name(nec, "usb") {
 		struct pci_controller *hose;
 		u32 data;
 		const u32 *prop;

arch/powerpc/platforms/powermac/smp.c

@@ -577,7 +577,7 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus)
 	int ok;
 
 	/* Look for the clock chip */
-	while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
+	for_each_node_by_name(cc, "i2c-hwclock") {
 		p = of_get_parent(cc);
 		ok = p && of_device_is_compatible(p, "uni-n-i2c");
 		of_node_put(p);

arch/powerpc/platforms/powermac/udbg_adb.c

@@ -191,7 +191,7 @@ int __init udbg_adb_init(int force_btext)
 	 * of type "adb". If not, we return a failure, but we keep the
 	 * bext output set for now
 	 */
-	for (np = NULL; (np = of_find_node_by_name(np, "keyboard")) != NULL;) {
+	for_each_node_by_name(np, "keyboard") {
 		struct device_node *parent = of_get_parent(np);
 		int found = (parent && strcmp(parent->type, "adb") == 0);
 		of_node_put(parent);

arch/powerpc/platforms/pseries/setup.c

@@ -232,8 +232,7 @@ static void __init pseries_discover_pic(void)
 	struct device_node *np;
 	const char *typep;
 
-	for (np = NULL; (np = of_find_node_by_name(np,
-						   "interrupt-controller"));) {
+	for_each_node_by_name(np, "interrupt-controller") {
 		typep = of_get_property(np, "compatible", NULL);
 		if (strstr(typep, "open-pic")) {
 			pSeries_mpic_node = of_node_get(np);

drivers/cpufreq/pmac64-cpufreq.c

@@ -499,8 +499,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 	}
 
 	/* Lookup the i2c hwclock */
-	for (hwclock = NULL;
-	     (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
+	for_each_node_by_name(hwclock, "i2c-hwclock") {
 		const char *loc = of_get_property(hwclock,
 				"hwctrl-location", NULL);
 		if (loc == NULL)

drivers/edac/cell_edac.c

@@ -134,8 +134,7 @@ static void cell_edac_init_csrows(struct mem_ctl_info *mci)
 	int				j;
 	u32				nr_pages;
 
-	for (np = NULL;
-	     (np = of_find_node_by_name(np, "memory")) != NULL;) {
+	for_each_node_by_name(np, "memory") {
 		struct resource r;
 
 		/* We "know" that the Cell firmware only creates one entry

drivers/of/base.c

@@ -17,6 +17,7 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
+#include <linux/console.h>
 #include <linux/ctype.h>
 #include <linux/cpu.h>
 #include <linux/module.h>
@@ -35,7 +36,7 @@ struct device_node *of_allnodes;
 EXPORT_SYMBOL(of_allnodes);
 struct device_node *of_chosen;
 struct device_node *of_aliases;
-static struct device_node *of_stdout;
+struct device_node *of_stdout;
 
 static struct kset *of_kset;
 
@@ -2062,9 +2063,12 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align))
 		of_chosen = of_find_node_by_path("/chosen@0");
 
 	if (of_chosen) {
+		/* linux,stdout-path and /aliases/stdout are for legacy compatibility */
 		const char *name = of_get_property(of_chosen, "stdout-path", NULL);
 		if (!name)
 			name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+		if (IS_ENABLED(CONFIG_PPC) && !name)
+			name = of_get_property(of_aliases, "stdout", NULL);
 		if (name)
 			of_stdout = of_find_node_by_path(name);
 	}
@@ -2180,20 +2184,22 @@ const char *of_prop_next_string(struct property *prop, const char *cur)
 EXPORT_SYMBOL_GPL(of_prop_next_string);
 
 /**
- * of_device_is_stdout_path - check if a device node matches the
- *                            linux,stdout-path property
- *
- * Check if this device node matches the linux,stdout-path property
- * in the chosen node. return true if yes, false otherwise.
+ * of_console_check() - Test and setup console for DT setup
+ * @dn - Pointer to device node
+ * @name - Name to use for preferred console without index. ex. "ttyS"
+ * @index - Index to use for preferred console.
+ *
+ * Check if the given device node matches the stdout-path property in the
+ * /chosen node. If it does then register it as the preferred console and return
+ * TRUE. Otherwise return FALSE.
  */
-int of_device_is_stdout_path(struct device_node *dn)
+bool of_console_check(struct device_node *dn, char *name, int index)
 {
-	if (!of_stdout)
+	if (!dn || dn != of_stdout || console_set_on_cmdline)
 		return false;
-
-	return of_stdout == dn;
+	return add_preferred_console(name, index, NULL);
 }
-EXPORT_SYMBOL_GPL(of_device_is_stdout_path);
+EXPORT_SYMBOL_GPL(of_console_check);
 
 /**
  *	of_find_next_cache_node - Find a node's subsidiary cache

drivers/pci/hotplug/rpaphp_core.c

@@ -375,11 +375,11 @@ static void __exit cleanup_slots(void)
 
 static int __init rpaphp_init(void)
 {
-	struct device_node *dn = NULL;
+	struct device_node *dn;
 
 	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
 
-	while ((dn = of_find_node_by_name(dn, "pci")))
+	for_each_node_by_name(dn, "pci")
 		rpaphp_add_slot(dn);
 
 	return 0;

drivers/tty/ehv_bytechan.c

@@ -108,55 +108,23 @@ static void disable_tx_interrupt(struct ehv_bc_data *bc)
  *
  * The byte channel to be used for the console is specified via a "stdout"
  * property in the /chosen node.
- *
- * For compatible with legacy device trees, we also look for a "stdout" alias.
  */
 static int find_console_handle(void)
 {
-	struct device_node *np, *np2;
+	struct device_node *np = of_stdout;
 	const char *sprop = NULL;
 	const uint32_t *iprop;
 
-	np = of_find_node_by_path("/chosen");
-	if (np)
-		sprop = of_get_property(np, "stdout-path", NULL);
-
-	if (!np || !sprop) {
-		of_node_put(np);
-		np = of_find_node_by_name(NULL, "aliases");
-		if (np)
-			sprop = of_get_property(np, "stdout", NULL);
-	}
-
-	if (!sprop) {
-		of_node_put(np);
-		return 0;
-	}
-
 	/* We don't care what the aliased node is actually called.  We only
 	 * care if it's compatible with "epapr,hv-byte-channel", because that
-	 * indicates that it's a byte channel node.  We use a temporary
-	 * variable, 'np2', because we can't release 'np' until we're done with
-	 * 'sprop'.
+	 * indicates that it's a byte channel node.
 	 */
-	np2 = of_find_node_by_path(sprop);
-	of_node_put(np);
-	np = np2;
-	if (!np) {
-		pr_warning("ehv-bc: stdout node '%s' does not exist\n", sprop);
-		return 0;
-	}
-
-	/* Is it a byte channel? */
-	if (!of_device_is_compatible(np, "epapr,hv-byte-channel")) {
-		of_node_put(np);
+	if (!np || !of_device_is_compatible(np, "epapr,hv-byte-channel"))
 		return 0;
-	}
 
 	stdout_irq = irq_of_parse_and_map(np, 0);
 	if (stdout_irq == NO_IRQ) {
-		pr_err("ehv-bc: no 'interrupts' property in %s node\n", sprop);
-		of_node_put(np);
+		pr_err("ehv-bc: no 'interrupts' property in %s node\n", np->full_name);
 		return 0;
 	}
 
@@ -167,12 +135,9 @@ static int find_console_handle(void)
 	if (!iprop) {
 		pr_err("ehv-bc: no 'hv-handle' property in %s node\n",
 		       np->name);
-		of_node_put(np);
 		return 0;
 	}
 	stdout_bc = be32_to_cpu(*iprop);
-
-	of_node_put(np);
 	return 1;
 }
 

drivers/tty/hvc/hvc_opal.c

@@ -342,22 +342,13 @@ static void udbg_init_opal_common(void)
 
 void __init hvc_opal_init_early(void)
 {
-	struct device_node *stdout_node = NULL;
+	struct device_node *stdout_node = of_node_get(of_stdout);
 	const __be32 *termno;
-	const char *name = NULL;
 	const struct hv_ops *ops;
 	u32 index;
 
-	/* find the boot console from /chosen/stdout */
-	if (of_chosen)
-		name = of_get_property(of_chosen, "linux,stdout-path", NULL);
-	if (name) {
-		stdout_node = of_find_node_by_path(name);
-		if (!stdout_node) {
-			pr_err("hvc_opal: Failed to locate default console!\n");
-			return;
-		}
-	} else {
+	/* If the console wasn't in /chosen, try /ibm,opal */
+	if (!stdout_node) {
 		struct device_node *opal, *np;
 
 		/* Current OPAL takeover doesn't provide the stdout

drivers/tty/hvc/hvc_vio.c

@@ -404,42 +404,35 @@ module_exit(hvc_vio_exit);
 
 void __init hvc_vio_init_early(void)
 {
-	struct device_node *stdout_node;
 	const __be32 *termno;
 	const char *name;
 	const struct hv_ops *ops;
 
 	/* find the boot console from /chosen/stdout */
-	if (!of_chosen)
+	if (!of_stdout)
 		return;
-	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
-	if (name == NULL)
-		return;
-	stdout_node = of_find_node_by_path(name);
-	if (!stdout_node)
-		return;
-	name = of_get_property(stdout_node, "name", NULL);
+	name = of_get_property(of_stdout, "name", NULL);
 	if (!name) {
 		printk(KERN_WARNING "stdout node missing 'name' property!\n");
-		goto out;
+		return;
 	}
 
 	/* Check if it's a virtual terminal */
 	if (strncmp(name, "vty", 3) != 0)
-		goto out;
-	termno = of_get_property(stdout_node, "reg", NULL);
+		return;
+	termno = of_get_property(of_stdout, "reg", NULL);
 	if (termno == NULL)
-		goto out;
+		return;
 	hvterm_priv0.termno = of_read_number(termno, 1);
 	spin_lock_init(&hvterm_priv0.buf_lock);
 	hvterm_privs[0] = &hvterm_priv0;
 
 	/* Check the protocol */
-	if (of_device_is_compatible(stdout_node, "hvterm1")) {
+	if (of_device_is_compatible(of_stdout, "hvterm1")) {
 		hvterm_priv0.proto = HV_PROTOCOL_RAW;
 		ops = &hvterm_raw_ops;
 	}
-	else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) {
+	else if (of_device_is_compatible(of_stdout, "hvterm-protocol")) {
 		hvterm_priv0.proto = HV_PROTOCOL_HVSI;
 		ops = &hvterm_hvsi_ops;
 		hvsilib_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars,
@@ -447,7 +440,7 @@ void __init hvc_vio_init_early(void)
 		/* HVSI, perform the handshake now */
 		hvsilib_establish(&hvterm_priv0.hvsi);
 	} else
-		goto out;
+		return;
 	udbg_putc = udbg_hvc_putc;
 	udbg_getc = udbg_hvc_getc;
 	udbg_getc_poll = udbg_hvc_getc_poll;
@@ -456,14 +449,12 @@ void __init hvc_vio_init_early(void)
 	 * backend for HVSI, only do udbg
 	 */
 	if (hvterm_priv0.proto == HV_PROTOCOL_HVSI)
-		goto out;
+		return;
 #endif
 	/* Check whether the user has requested a different console. */
 	if (!strstr(cmd_line, "console="))
 		add_preferred_console("hvc", 0, NULL);
 	hvc_instantiate(0, 0, ops);
-out:
-	of_node_put(stdout_node);
 }
 
 /* call this from early_init() for a working debug console on

drivers/tty/serial/pmac_zilog.c

@@ -1650,8 +1650,7 @@ static int __init pmz_probe(void)
 	/*
 	 * Find all escc chips in the system
 	 */
-	node_p = of_find_node_by_name(NULL, "escc");
-	while (node_p) {
+	for_each_node_by_name(node_p, "escc") {
 		/*
 		 * First get channel A/B node pointers
 		 * 
@@ -1669,7 +1668,7 @@ static int __init pmz_probe(void)
 			of_node_put(node_b);
 			printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n",
 				(!node_a) ? 'a' : 'b', node_p->full_name);
-			goto next;
+			continue;
 		}
 
 		/*
@@ -1696,11 +1695,9 @@ static int __init pmz_probe(void)
 			of_node_put(node_b);
 			memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port));
 			memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port));
-			goto next;
+			continue;
 		}
 		count += 2;
-next:
-		node_p = of_find_node_by_name(node_p, "escc");
 	}
 	pmz_ports_count = count;
 

drivers/tty/serial/serial_core.c

@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/console.h>
+#include <linux/of.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/device.h>
@@ -2615,6 +2616,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 		spin_lock_init(&uport->lock);
 		lockdep_set_class(&uport->lock, &port_lock_key);
 	}
+	if (uport->cons && uport->dev)
+		of_console_check(uport->dev->of_node, uport->cons->name, uport->line);
 
 	uart_configure_port(drv, state, uport);
 

include/linux/of.h

@@ -113,6 +113,7 @@ static inline void of_node_put(struct device_node *node) { }
 extern struct device_node *of_allnodes;
 extern struct device_node *of_chosen;
 extern struct device_node *of_aliases;
+extern struct device_node *of_stdout;
 extern raw_spinlock_t devtree_lock;
 
 static inline bool of_have_populated_dt(void)
@@ -352,7 +353,7 @@ const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
  */
 const char *of_prop_next_string(struct property *prop, const char *cur);
 
-int of_device_is_stdout_path(struct device_node *dn);
+bool of_console_check(struct device_node *dn, char *name, int index);
 
 #else /* CONFIG_OF */
 
@@ -564,9 +565,9 @@ static inline int of_machine_is_compatible(const char *compat)
 	return 0;
 }
 
-static inline int of_device_is_stdout_path(struct device_node *dn)
+static inline bool of_console_check(const struct device_node *dn, const char *name, int index)
 {
-	return 0;
+	return false;
 }
 
 static inline const __be32 *of_prop_next_u32(struct property *prop,

sound/ppc/pmac.c

@@ -992,9 +992,9 @@ static int snd_pmac_detect(struct snd_pmac *chip)
 		return -ENODEV;
 
 	if (!sound) {
-		sound = of_find_node_by_name(NULL, "sound");
-		while (sound && sound->parent != chip->node)
-			sound = of_find_node_by_name(sound, "sound");
+		for_each_node_by_name(sound, "sound")
+			if (sound->parent == chip->node)
+				break;
 	}
 	if (! sound) {
 		of_node_put(chip->node);