Commit b7765207 authored by Tomasz Duszynski's avatar Tomasz Duszynski Committed by Jonathan Cameron

dt-bindings: iio: scd30: add device binding file

Add SCD30 sensor binding file.
Signed-off-by: default avatarTomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent d4553d6e
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sensirion SCD30 carbon dioxide sensor
maintainers:
- Tomasz Duszynski <tomasz.duszynski@octakon.com>
description: |
Air quality sensor capable of measuring co2 concentration, temperature
and relative humidity.
properties:
compatible:
enum:
- sensirion,scd30
reg:
maxItems: 1
interrupts:
maxItems: 1
vdd-supply: true
sensirion,sel-gpios:
description: GPIO connected to the SEL line
maxItems: 1
sensirion,pwm-gpios:
description: GPIO connected to the PWM line
maxItems: 1
required:
- compatible
additionalProperties: false
examples:
- |
# include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
co2-sensor@61 {
compatible = "sensirion,scd30";
reg = <0x61>;
vdd-supply = <&vdd>;
interrupt-parent = <&gpio0>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
};
- |
# include <dt-bindings/interrupt-controller/irq.h>
serial {
co2-sensor {
compatible = "sensirion,scd30";
vdd-supply = <&vdd>;
interrupt-parent = <&gpio0>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
};
...
......@@ -15354,6 +15354,7 @@ F: include/uapi/linux/phantom.h
SENSIRION SCD30 CARBON DIOXIDE SENSOR DRIVER
M: Tomasz Duszynski <tomasz.duszynski@octakon.com>
S: Maintained
F: Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
F: drivers/iio/chemical/scd30.h
F: drivers/iio/chemical/scd30_core.c
F: drivers/iio/chemical/scd30_i2c.c
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment