Commit b78cd169 authored by Jaeden Amero's avatar Jaeden Amero Committed by Greg Kroah-Hartman

serial: atmel: Use atmel_port consistently

In all functions other than atmel_serial_probe_fifos,
atmel_serial_probe, and atmel_console_init, the name "port" is used to
refer to an instance of struct uart_port. In many of these functions,
"atmel_port" is used to refer to an instance of struct atmel_uart_port.

We make the use of the name "port" consistent by making
atmel_serial_probe_fifos, atmel_serial_probe, and atmel_console_init
use "atmel_port" to refer to an instance of struct atmel_uart_port
instead of the previous name of "port".
Signed-off-by: default avatarJaeden Amero <jaeden.amero@ni.com>
Signed-off-by: default avatarKyle Roeschley <kyle.roeschley@ni.com>
Acked-by: default avatarKarthik Manamcheri <karthik.manamcheri@ni.com>
[nicolas.ferre@atmel.com: fix typo in variable, adapt to newer kernel]
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 1d673fb9
......@@ -2479,13 +2479,13 @@ static int __init atmel_console_init(void)
struct atmel_uart_data *pdata =
dev_get_platdata(&atmel_default_console_device->dev);
int id = pdata->num;
struct atmel_uart_port *port = &atmel_ports[id];
struct atmel_uart_port *atmel_port = &atmel_ports[id];
port->backup_imr = 0;
port->uart.line = id;
atmel_port->backup_imr = 0;
atmel_port->uart.line = id;
add_preferred_console(ATMEL_DEVICENAME, id, NULL);
ret = atmel_init_port(port, atmel_default_console_device);
ret = atmel_init_port(atmel_port, atmel_default_console_device);
if (ret)
return ret;
register_console(&atmel_console);
......@@ -2600,23 +2600,23 @@ static int atmel_serial_resume(struct platform_device *pdev)
#define atmel_serial_resume NULL
#endif
static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
port->fifo_size = 0;
port->rts_low = 0;
port->rts_high = 0;
atmel_port->fifo_size = 0;
atmel_port->rts_low = 0;
atmel_port->rts_high = 0;
if (of_property_read_u32(pdev->dev.of_node,
"atmel,fifo-size",
&port->fifo_size))
&atmel_port->fifo_size))
return;
if (!port->fifo_size)
if (!atmel_port->fifo_size)
return;
if (port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
port->fifo_size = 0;
if (atmel_port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
atmel_port->fifo_size = 0;
dev_err(&pdev->dev, "Invalid FIFO size\n");
return;
}
......@@ -2629,22 +2629,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
* Threshold to a reasonably high value respecting this 16 data
* empirical rule when possible.
*/
port->rts_high = max_t(int, port->fifo_size >> 1,
port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
port->rts_low = max_t(int, port->fifo_size >> 2,
port->fifo_size - ATMEL_RTS_LOW_OFFSET);
atmel_port->rts_high = max_t(int, atmel_port->fifo_size >> 1,
atmel_port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
atmel_port->rts_low = max_t(int, atmel_port->fifo_size >> 2,
atmel_port->fifo_size - ATMEL_RTS_LOW_OFFSET);
dev_info(&pdev->dev, "Using FIFO (%u data)\n",
port->fifo_size);
atmel_port->fifo_size);
dev_dbg(&pdev->dev, "RTS High Threshold : %2u data\n",
port->rts_high);
atmel_port->rts_high);
dev_dbg(&pdev->dev, "RTS Low Threshold : %2u data\n",
port->rts_low);
atmel_port->rts_low);
}
static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
struct atmel_uart_port *atmel_port;
struct device_node *np = pdev->dev.of_node;
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
void *data;
......@@ -2675,87 +2675,88 @@ static int atmel_serial_probe(struct platform_device *pdev)
goto err;
}
port = &atmel_ports[ret];
port->backup_imr = 0;
port->uart.line = ret;
atmel_serial_probe_fifos(port, pdev);
atmel_port = &atmel_ports[ret];
atmel_port->backup_imr = 0;
atmel_port->uart.line = ret;
atmel_serial_probe_fifos(atmel_port, pdev);
spin_lock_init(&port->lock_suspended);
spin_lock_init(&atmel_port->lock_suspended);
ret = atmel_init_port(port, pdev);
ret = atmel_init_port(atmel_port, pdev);
if (ret)
goto err_clear_bit;
port->gpios = mctrl_gpio_init(&port->uart, 0);
if (IS_ERR(port->gpios)) {
ret = PTR_ERR(port->gpios);
atmel_port->gpios = mctrl_gpio_init(&atmel_port->uart, 0);
if (IS_ERR(atmel_port->gpios)) {
ret = PTR_ERR(atmel_port->gpios);
goto err_clear_bit;
}
if (!atmel_use_pdc_rx(&port->uart)) {
if (!atmel_use_pdc_rx(&atmel_port->uart)) {
ret = -ENOMEM;
data = kmalloc(sizeof(struct atmel_uart_char)
* ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
if (!data)
goto err_alloc_ring;
port->rx_ring.buf = data;
atmel_port->rx_ring.buf = data;
}
rs485_enabled = port->uart.rs485.flags & SER_RS485_ENABLED;
rs485_enabled = atmel_port->uart.rs485.flags & SER_RS485_ENABLED;
ret = uart_add_one_port(&atmel_uart, &port->uart);
ret = uart_add_one_port(&atmel_uart, &atmel_port->uart);
if (ret)
goto err_add_port;
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
if (atmel_is_console_port(&port->uart)
if (atmel_is_console_port(&atmel_port->uart)
&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
/*
* The serial core enabled the clock for us, so undo
* the clk_prepare_enable() in atmel_console_setup()
*/
clk_disable_unprepare(port->clk);
clk_disable_unprepare(atmel_port->clk);
}
#endif
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, port);
platform_set_drvdata(pdev, atmel_port);
/*
* The peripheral clock has been disabled by atmel_init_port():
* enable it before accessing I/O registers
*/
clk_prepare_enable(port->clk);
clk_prepare_enable(atmel_port->clk);
if (rs485_enabled) {
atmel_uart_writel(&port->uart, ATMEL_US_MR,
atmel_uart_writel(&atmel_port->uart, ATMEL_US_MR,
ATMEL_US_USMODE_NORMAL);
atmel_uart_writel(&port->uart, ATMEL_US_CR, ATMEL_US_RTSEN);
atmel_uart_writel(&atmel_port->uart, ATMEL_US_CR,
ATMEL_US_RTSEN);
}
/*
* Get port name of usart or uart
*/
atmel_get_ip_name(&port->uart);
atmel_get_ip_name(&atmel_port->uart);
/*
* The peripheral clock can now safely be disabled till the port
* is used
*/
clk_disable_unprepare(port->clk);
clk_disable_unprepare(atmel_port->clk);
return 0;
err_add_port:
kfree(port->rx_ring.buf);
port->rx_ring.buf = NULL;
kfree(atmel_port->rx_ring.buf);
atmel_port->rx_ring.buf = NULL;
err_alloc_ring:
if (!atmel_is_console_port(&port->uart)) {
clk_put(port->clk);
port->clk = NULL;
if (!atmel_is_console_port(&atmel_port->uart)) {
clk_put(atmel_port->clk);
atmel_port->clk = NULL;
}
err_clear_bit:
clear_bit(port->uart.line, atmel_ports_in_use);
clear_bit(atmel_port->uart.line, atmel_ports_in_use);
err:
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment