drm/i915/dpio: Derive the phy from the port rather than pipe in encoder hooks

In the encoder hooks we are dealing primarily with the encoder,
so derive the DPIO PHY from the encoder rather than the pipe.
Technically this doesn't matter as we can't cross connect
pipes<->port across PHY boundaries, but it does conveny the
intention more accurately.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-10-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

drivers/gpu/drm/i915/display/intel_dpio_phy.c

@@ -719,9 +719,8 @@ void chv_set_phy_signal_level(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	enum dpio_channel ch = vlv_dig_port_to_channel(dig_port);
-	enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe);
+	enum dpio_phy phy = vlv_dig_port_to_phy(dig_port);
 	u32 val;
 	int i;
 
@@ -814,9 +813,9 @@ void chv_data_lane_soft_reset(struct intel_encoder *encoder,
 			      bool reset)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	enum dpio_channel ch = vlv_dig_port_to_channel(enc_to_dig_port(encoder));
-	enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe);
+	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+	enum dpio_channel ch = vlv_dig_port_to_channel(dig_port);
+	enum dpio_phy phy = vlv_dig_port_to_phy(dig_port);
 	u32 val;
 
 	val = vlv_dpio_read(dev_priv, phy, VLV_PCS01_DW0(ch));
@@ -861,7 +860,7 @@ void chv_phy_pre_pll_enable(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	enum dpio_channel ch = vlv_dig_port_to_channel(dig_port);
-	enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe);
+	enum dpio_phy phy = vlv_dig_port_to_phy(dig_port);
 	enum pipe pipe = crtc->pipe;
 	unsigned int lane_mask =
 		intel_dp_unused_lane_mask(crtc_state->lane_count);
@@ -941,9 +940,8 @@ void chv_phy_pre_encoder_enable(struct intel_encoder *encoder,
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	enum dpio_channel ch = vlv_dig_port_to_channel(dig_port);
-	enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe);
+	enum dpio_phy phy = vlv_dig_port_to_phy(dig_port);
 	int data, i, stagger;
 	u32 val;
 
@@ -1030,8 +1028,8 @@ void chv_phy_post_pll_disable(struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum dpio_phy phy = vlv_dig_port_to_phy(enc_to_dig_port(encoder));
 	enum pipe pipe = to_intel_crtc(old_crtc_state->uapi.crtc)->pipe;
-	enum dpio_phy phy = vlv_pipe_to_phy(pipe);
 	u32 val;
 
 	vlv_dpio_get(dev_priv);
@@ -1068,9 +1066,8 @@ void vlv_set_phy_signal_level(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	enum dpio_channel ch = vlv_dig_port_to_channel(dig_port);
-	enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe);
+	enum dpio_phy phy = vlv_dig_port_to_phy(dig_port);
 
 	vlv_dpio_get(dev_priv);
 
@@ -1095,9 +1092,8 @@ void vlv_phy_pre_pll_enable(struct intel_encoder *encoder,
 {
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	enum dpio_channel ch = vlv_dig_port_to_channel(dig_port);
-	enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe);
+	enum dpio_phy phy = vlv_dig_port_to_phy(dig_port);
 
 	/* Program Tx lane resets to default */
 	vlv_dpio_get(dev_priv);
@@ -1127,8 +1123,8 @@ void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	enum dpio_channel ch = vlv_dig_port_to_channel(dig_port);
+	enum dpio_phy phy = vlv_dig_port_to_phy(dig_port);
 	enum pipe pipe = crtc->pipe;
-	enum dpio_phy phy = vlv_pipe_to_phy(pipe);
 	u32 val;
 
 	vlv_dpio_get(dev_priv);
@@ -1154,9 +1150,8 @@ void vlv_phy_reset_lanes(struct intel_encoder *encoder,
 {
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
 	enum dpio_channel ch = vlv_dig_port_to_channel(dig_port);
-	enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe);
+	enum dpio_phy phy = vlv_dig_port_to_phy(dig_port);
 
 	vlv_dpio_get(dev_priv);
 	vlv_dpio_write(dev_priv, phy, VLV_PCS_DW0(ch), 0x00000000);

drivers/gpu/drm/i915/vlv_sideband.c

@@ -9,7 +9,6 @@
 #include "vlv_sideband.h"
 
 #include "display/intel_dpio_phy.h"
-#include "display/intel_display_types.h"
 
 /*
  * IOSF sideband, see VLV2_SidebandMsg_HAS.docx and