Commit b79985ca authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Eduardo Valentin

thermal: exynos: add ->tmu_read method

Add ->tmu_read method to struct exynos_tmu_data and use it
in exynos_tmu_control().  Then add ->tmu_read implementations
for Exynos4210, Exynos4412+ and Exynos5440.  Finally remove
no longer needed reg->tmu_cur_temp abstractions.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Tested-by: default avatarLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: default avatarEduardo Valentin <edubezval@gmail.com>
parent 37f9034f
......@@ -54,6 +54,7 @@
* @reg_conf: pointer to structure to register with core thermal.
* @tmu_initialize: SoC specific TMU initialization method
* @tmu_control: SoC specific TMU control method
* @tmu_read: SoC specific TMU temperature read method
*/
struct exynos_tmu_data {
int id;
......@@ -70,6 +71,7 @@ struct exynos_tmu_data {
struct thermal_sensor_conf *reg_conf;
int (*tmu_initialize)(struct platform_device *pdev);
void (*tmu_control)(struct platform_device *pdev, bool on);
int (*tmu_read)(struct exynos_tmu_data *data);
};
/*
......@@ -422,29 +424,17 @@ static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
static int exynos_tmu_read(struct exynos_tmu_data *data)
{
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
u8 temp_code;
int temp;
int ret;
mutex_lock(&data->lock);
clk_enable(data->clk);
temp_code = readb(data->base + reg->tmu_cur_temp);
if (data->soc == SOC_ARCH_EXYNOS4210)
/* temp_code should range between 75 and 175 */
if (temp_code < 75 || temp_code > 175) {
temp = -ENODATA;
goto out;
}
temp = code_to_temp(data, temp_code);
out:
ret = data->tmu_read(data);
if (ret >= 0)
ret = code_to_temp(data, ret);
clk_disable(data->clk);
mutex_unlock(&data->lock);
return temp;
return ret;
}
#ifdef CONFIG_THERMAL_EMULATION
......@@ -494,6 +484,24 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
{ return -EINVAL; }
#endif/*CONFIG_THERMAL_EMULATION*/
static int exynos4210_tmu_read(struct exynos_tmu_data *data)
{
int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
/* "temp_code" should range between 75 and 175 */
return (ret < 75 || ret > 175) ? -ENODATA : ret;
}
static int exynos4412_tmu_read(struct exynos_tmu_data *data)
{
return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
}
static int exynos5440_tmu_read(struct exynos_tmu_data *data)
{
return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
}
static void exynos_tmu_work(struct work_struct *work)
{
struct exynos_tmu_data *data = container_of(work,
......@@ -718,6 +726,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
case SOC_ARCH_EXYNOS4210:
data->tmu_initialize = exynos4210_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4210_tmu_read;
break;
case SOC_ARCH_EXYNOS3250:
case SOC_ARCH_EXYNOS4412:
......@@ -727,10 +736,12 @@ static int exynos_tmu_probe(struct platform_device *pdev)
case SOC_ARCH_EXYNOS5420_TRIMINFO:
data->tmu_initialize = exynos4412_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4412_tmu_read;
break;
case SOC_ARCH_EXYNOS5440:
data->tmu_initialize = exynos5440_tmu_initialize;
data->tmu_control = exynos5440_tmu_control;
data->tmu_read = exynos5440_tmu_read;
break;
default:
ret = -EINVAL;
......
......@@ -70,13 +70,11 @@ enum soc_type {
/**
* struct exynos_tmu_register - register descriptors to access registers.
* The register validity may vary slightly across different exynos SOC's.
* @tmu_cur_temp: register containing the current temperature of the TMU.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
* @emul_con: TMU emulation controller register.
*/
struct exynos_tmu_registers {
u32 tmu_cur_temp;
u32 tmu_intstat;
u32 tmu_intclear;
u32 emul_con;
......
......@@ -26,7 +26,6 @@
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
};
......@@ -74,7 +73,6 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.emul_con = EXYNOS_EMUL_CON,
......@@ -135,7 +133,6 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.emul_con = EXYNOS_EMUL_CON,
......@@ -208,7 +205,6 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5260)
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
.emul_con = EXYNOS5260_EMUL_CON,
......@@ -271,7 +267,6 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.emul_con = EXYNOS_EMUL_CON,
......@@ -340,7 +335,6 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment