Commit b7d58394 authored by Francois Romieu's avatar Francois Romieu Committed by Jeff Garzik

chelsio: the return statement is not a function

Signed-off-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
parent c697f83e
......@@ -10,25 +10,25 @@ static int my3126_reset(struct cphy *cphy, int wait)
* This can be done through registers. It is not required since
* a full chip reset is used.
*/
return (0);
return 0;
}
static int my3126_interrupt_enable(struct cphy *cphy)
{
schedule_delayed_work(&cphy->phy_update, HZ/30);
t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
return (0);
return 0;
}
static int my3126_interrupt_disable(struct cphy *cphy)
{
cancel_rearming_delayed_work(&cphy->phy_update);
return (0);
return 0;
}
static int my3126_interrupt_clear(struct cphy *cphy)
{
return (0);
return 0;
}
#define OFFSET(REG_ADDR) (REG_ADDR << 2)
......@@ -102,7 +102,7 @@ static void my3216_poll(struct work_struct *work)
static int my3126_set_loopback(struct cphy *cphy, int on)
{
return (0);
return 0;
}
/* To check the activity LED */
......@@ -146,7 +146,7 @@ static int my3126_get_link_status(struct cphy *cphy,
if (fc)
*fc = PAUSE_RX | PAUSE_TX;
return (0);
return 0;
}
static void my3126_destroy(struct cphy *cphy)
......@@ -177,7 +177,7 @@ static struct cphy *my3126_phy_create(adapter_t *adapter,
INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
cphy->bmsr = 0;
return (cphy);
return cphy;
}
/* Chip Reset */
......@@ -198,7 +198,7 @@ static int my3126_phy_reset(adapter_t * adapter)
val |= 0x8000;
t1_tpi_write(adapter, A_ELMER0_GPO, val);
udelay(100);
return (0);
return 0;
}
struct gphy t1_my3126_ops = {
......
......@@ -256,7 +256,7 @@ static int bist_rd(adapter_t *adapter, int moduleid, int address)
else if((result & (1<<8)) != 0x0)
CH_ERR("bist read error: 0x%x\n", result);
return(result & 0xff);
return (result & 0xff);
}
static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
......@@ -286,7 +286,7 @@ static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
else if((result & (1<<26)) != 0x0)
CH_ERR("bist write error: 0x%x\n", result);
return(0);
return 0;
}
static int run_bist(adapter_t *adapter, int moduleid)
......@@ -295,7 +295,7 @@ static int run_bist(adapter_t *adapter, int moduleid)
(void) bist_wr(adapter,moduleid, 0x00, 0x02);
(void) bist_wr(adapter,moduleid, 0x01, 0x01);
return(0);
return 0;
}
static int check_bist(adapter_t *adapter, int moduleid)
......@@ -309,14 +309,14 @@ static int check_bist(adapter_t *adapter, int moduleid)
if ((result & 3) != 0x3)
CH_ERR("Result: 0x%x BIST error in ram %d, column: 0x%04x\n",
result, moduleid, column);
return(0);
return 0;
}
static int enable_mem(adapter_t *adapter, int moduleid)
{
/*enable mem*/
(void) bist_wr(adapter,moduleid, 0x00, 0x00);
return(0);
return 0;
}
static int run_bist_all(adapter_t *adapter)
......@@ -358,7 +358,7 @@ static int run_bist_all(adapter_t *adapter)
udelay(300);
vsc_write(adapter, REG_MEM_BIST, 0x0);
mdelay(10);
return(0);
return 0;
}
static int mac_intr_handler(struct cmac *mac)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment