Merge tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "One new driver, support for new models in existing ones, dt-bindings
  conversions for several modules and improvements all over the place.

  Summary:

   - new driver for the IDT 79RC3243x GPIO controller

   - device tree bindings coversion to YAML for the following drivers:
     gpio-rk3328-grf, gpio-omap, gpio-davinci, gpio-zynq, gpio-stp,
     gpio-pcf857x

   - cleanup of probe functions in many drivers from Alexandru Ardelean,
     mostly dropping unnecessary calls to platform_set_drvdata() and
     removing error messages where none are needed (handled by the
     subsystem already)

   - several improvements to the core gpiolib and the sysfs interface
     code from Andy Shevchenko

   - conversion of the gpio-xilinx driver to using the bitmap API +
     improvements of suspend/resume handling + minor tweaks

   - convert the gpio-stmpe to using devres helpers exclusively in probe
     for improved robustness

   - updates for the generic gpio-regmap driver

   - updates for the gpio-dwapb driver

   - support for a new model in gpio-pca953x

   - cleanups in gpio-tegra186, gpio-104-idio-16, gpio-mxs & gpio-xgene

   - slight code refactoring of the gpio-zynq driver

   - documentation fixes from Mauro Carvalho Chehab

   - a bunch of minor tweaks and improvements all over the place"

* tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (57 commits)
  docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
  dt-bindings: gpio: pcf857x: Convert to json-schema
  gpio: mxs: Prefer unsigned int to bare use of unsigned
  dt-bindings: gpio: stp: convert to json-schema
  dt-bindings: gpio: zynq: convert bindings to YAML
  dt-bindings: gpio: gpio-davinci: Convert to json-schema
  gpio: pca953x: Add support for the On Semi pca9655
  gpio: gpio-xilinx: update on suspend and resume calls
  gpio: zynq: Check return value of irq_get_irq_data
  gpio: zynq: Check return value of pm_runtime_get_sync
  gpio: zynq: use module_platform_driver to simplify the code
  gpio: idt3243x: Fix return value check in idt_gpio_probe()
  MAINTAINERS: update ti,omap-gpio.yaml reference
  dt-bindings: gpio: Add devicetree binding for IDT 79RC32434 GPIO controller
  gpio: Add support for IDT 79RC3243x GPIO controller
  gpio: regmap: move drvdata to config data
  gpio-dwapb: Drop unused headers and sort the rest
  gpio: gpio-regmap: Use devm_add_action_or_reset()
  gpio: dwapb: Switch to use fwnode_irq_get()
  gpio: dwapb: Drop redundant check in dwapb_irq_set_type()
  ...

Documentation/devicetree/bindings/gpio/gpio-davinci.txt

-Davinci/Keystone GPIO controller bindings
-
-Required Properties:
-- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs
-			"ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
-						66AK2E SoCs
-			"ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
-			"ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654
-			"ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs
-			"ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs
-
-- reg: Physical base address of the controller and the size of memory mapped
-       registers.
-
-- gpio-controller : Marks the device node as a gpio controller.
-
-- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify optional parameters (unused)
-
-- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
-	      supported at a time.
-
-- ti,ngpio: The number of GPIO pins supported.
-
-- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
-		            line to processor.
-
-- clocks: Should contain the device's input clock, and should be defined as per
-          the appropriate clock bindings consumer usage in,
-
-          Documentation/devicetree/bindings/clock/keystone-gate.txt
-                            for 66AK2HK/66AK2L/66AK2E SoCs or,
-
-          Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
-                            for 66AK2G SoCs
-
-- clock-names: Name should be "gpio";
-
-Currently clock-names and clocks are needed for all keystone 2 platforms
-Davinci platforms do not have DT clocks as of now.
-
-The GPIO controller also acts as an interrupt controller. It uses the default
-two cells specifier as described in Documentation/devicetree/bindings/
-interrupt-controller/interrupts.txt.
-
-Example:
-
-gpio: gpio@1e26000 {
-	compatible = "ti,dm6441-gpio";
-	gpio-controller;
-	#gpio-cells = <2>;
-	reg = <0x226000 0x1000>;
-	interrupt-parent = <&intc>;
-	interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH
-		44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH
-		46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH
-		48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH
-		50 IRQ_TYPE_EDGE_BOTH>;
-	ti,ngpio = <144>;
-	ti,davinci-gpio-unbanked = <0>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-leds {
-	compatible = "gpio-leds";
-
-	led1 {
-		label = "davinci:green:usr1";
-		gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
-		...
-	};
-
-	led2 {
-		label = "davinci:red:debug1";
-		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		...
-	};
-};
-
-Example for 66AK2G:
-
-gpio0: gpio@2603000 {
-	compatible = "ti,k2g-gpio", "ti,keystone-gpio";
-	reg = <0x02603000 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	ti,ngpio = <144>;
-	ti,davinci-gpio-unbanked = <0>;
-	clocks = <&k2g_clks 0x001b 0x0>;
-	clock-names = "gpio";
-};
-
-Example for 66AK2HK/66AK2L/66AK2E:
-
-gpio0: gpio@260bf00 {
-	compatible = "ti,keystone-gpio";
-	reg = <0x0260bf00 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	/* HW Interrupts mapped to GPIO pins */
-	interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkgpio>;
-	clock-names = "gpio";
-	ti,ngpio = <32>;
-	ti,davinci-gpio-unbanked = <32>;
-};
-
-Example for K3 AM654:
-
-wkup_gpio0: wkup_gpio0@42110000 {
-	compatible = "ti,am654-gpio", "ti,keystone-gpio";
-	reg = <0x42110000 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-parent = <&intr_wkup_gpio>;
-	interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	ti,ngpio = <56>;
-	ti,davinci-gpio-unbanked = <0>;
-	clocks = <&k3_clks 59 0>;
-	clock-names = "gpio";
-};

Documentation/devicetree/bindings/gpio/gpio-davinci.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-davinci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controller for Davinci and keystone devices
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,k2g-gpio
+              - ti,am654-gpio
+              - ti,j721e-gpio
+              - ti,am64-gpio
+          - const: ti,keystone-gpio
+
+      - items:
+          - enum:
+              - ti,dm6441-gpio
+              - ti,keystone-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line.
+    minItems: 1
+    maxItems: 100
+
+  "#gpio-cells":
+    const: 2
+    description:
+      first cell is the pin number and second cell is used to specify optional parameters (unused).
+
+  interrupts:
+    description:
+      The interrupts are specified as per the interrupt parent. Only banked
+      or unbanked IRQs are supported at a time. If the interrupts are
+      banked then provide list of interrupts corresponding to each bank, else
+      provide the list of interrupts for each gpio.
+    minItems: 1
+    maxItems: 100
+
+  ti,ngpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of GPIO pins supported consecutively.
+    minimum: 1
+
+  ti,davinci-gpio-unbanked:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of GPIOs that have an individual interrupt line to processor.
+    minimum: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: gpio
+
+  interrupt-controller: true
+
+  power-domains:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - ti,ngpio
+  - ti,davinci-gpio-unbanked
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio0: gpio@2603000 {
+      compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+      reg = <0x02603000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      ti,ngpio = <144>;
+      ti,davinci-gpio-unbanked = <0>;
+      clocks = <&k2g_clks 0x001b 0x0>;
+      clock-names = "gpio";
+    };
+
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio1: gpio@260bf00 {
+      compatible = "ti,keystone-gpio";
+      reg = <0x0260bf00 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      /* HW Interrupts mapped to GPIO pins */
+      interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkgpio>;
+      clock-names = "gpio";
+      ti,ngpio = <32>;
+      ti,davinci-gpio-unbanked = <32>;
+    };
+
+  - |
+    wkup_gpio0: gpio0@42110000 {
+      compatible = "ti,am654-gpio", "ti,keystone-gpio";
+      reg = <0x42110000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-parent = <&intr_wkup_gpio>;
+      interrupts = <60>, <61>, <62>, <63>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      ti,ngpio = <56>;
+      ti,davinci-gpio-unbanked = <0>;
+      clocks = <&k3_clks 59 0>;
+      clock-names = "gpio";
+    };

Documentation/devicetree/bindings/gpio/gpio-omap.txt

-OMAP GPIO controller bindings
-
-Required properties:
-- compatible:
-  - "ti,omap2-gpio" for OMAP2 controllers
-  - "ti,omap3-gpio" for OMAP3 controllers
-  - "ti,omap4-gpio" for OMAP4 controllers
-- reg : Physical base address of the controller and length of memory mapped
-  region.
-- gpio-controller : Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify optional parameters (unused)
-- interrupt-controller: Mark the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-- interrupts : The interrupt the controller is rising as output when an
-  interrupt occures
-
-OMAP specific properties:
-- ti,hwmods:		Name of the hwmod associated to the GPIO:
-			"gpio<X>", <X> being the 1-based instance number
-			from the HW spec.
-- ti,gpio-always-on: 	Indicates if a GPIO bank is always powered and
-			so will never lose its logic state.
-
-
-Example:
-
-gpio0: gpio@44e07000 {
-    compatible = "ti,omap4-gpio";
-    reg = <0x44e07000 0x1000>;
-    ti,hwmods = "gpio1";
-    gpio-controller;
-    #gpio-cells = <2>;
-    interrupt-controller;
-    #interrupt-cells = <2>;
-    interrupts = <96>;
-};

Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt

-* PCF857x-compatible I/O expanders
-
-The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
-driven high by a pull-up current source or driven low to ground. This combines
-the direction and output level into a single bit per line, which can't be read
-back. We can't actually know at initialization time whether a line is configured
-(a) as output and driving the signal low/high, or (b) as input and reporting a
-low/high value, without knowing the last value written since the chip came out
-of reset (if any). The only reliable solution for setting up line direction is
-thus to do it explicitly.
-
-Required Properties:
-
-  - compatible: should be one of the following.
-    - "maxim,max7328": For the Maxim MAX7378
-    - "maxim,max7329": For the Maxim MAX7329
-    - "nxp,pca8574": For the NXP PCA8574
-    - "nxp,pca8575": For the NXP PCA8575
-    - "nxp,pca9670": For the NXP PCA9670
-    - "nxp,pca9671": For the NXP PCA9671
-    - "nxp,pca9672": For the NXP PCA9672
-    - "nxp,pca9673": For the NXP PCA9673
-    - "nxp,pca9674": For the NXP PCA9674
-    - "nxp,pca9675": For the NXP PCA9675
-    - "nxp,pcf8574": For the NXP PCF8574
-    - "nxp,pcf8574a": For the NXP PCF8574A
-    - "nxp,pcf8575": For the NXP PCF8575
-
-  - reg: I2C slave address.
-
-  - gpio-controller: Marks the device node as a gpio controller.
-  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-Optional Properties:
-
-  - lines-initial-states: Bitmask that specifies the initial state of each
-  line. When a bit is set to zero, the corresponding line will be initialized to
-  the input (pulled-up) state. When the  bit is set to one, the line will be
-  initialized the low-level output state. If the property is not specified
-  all lines will be initialized to the input state.
-
-  The I/O expander can detect input state changes, and thus optionally act as
-  an interrupt controller. When the expander interrupt line is connected all the
-  following properties must be set. For more information please see the
-  interrupt controller device tree bindings documentation available at
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
-
-  - interrupt-controller: Identifies the node as an interrupt controller.
-  - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
-  - interrupts: Interrupt specifier for the controllers interrupt.
-
-
-Please refer to gpio.txt in this directory for details of the common GPIO
-bindings used by client devices.
-
-Example: PCF8575 I/O expander node
-
-	pcf8575: gpio@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		interrupt-parent = <&irqpin2>;
-		interrupts = <3 0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};

Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt

-Lantiq SoC Serial To Parallel (STP) GPIO controller
-
-The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
-peripheral controller used to drive external shift register cascades. At most
-3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
-to drive the 2 LSBs of the cascade automatically.
-
-
-Required properties:
-- compatible : Should be "lantiq,gpio-stp-xway"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify optional parameters (currently
-  unused).
-- gpio-controller : Marks the device node as a gpio controller.
-
-Optional properties:
-- lantiq,shadow : The default value that we shall assume as already set on the
-  shift register cascade.
-- lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled
-  in the shift register cascade.
-- lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
-  property can enable this feature.
-- lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade.
-- lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade.
-- lantiq,rising : use rising instead of falling edge for the shift register
-
-Example:
-
-gpio1: stp@e100bb0 {
-	compatible = "lantiq,gpio-stp-xway";
-	reg = <0xE100BB0 0x40>;
-	#gpio-cells = <2>;
-	gpio-controller;
-
-	lantiq,shadow = <0xffff>;
-	lantiq,groups = <0x7>;
-	lantiq,dsl = <0x3>;
-	lantiq,phy1 = <0x7>;
-	lantiq,phy2 = <0x7>;
-	/* lantiq,rising; */
-};

Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq SoC Serial To Parallel (STP) GPIO controller
+
+description: |
+  The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
+  peripheral controller used to drive external shift register cascades. At most
+  3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
+  and Ethernet PHYs to drive some bytes of the cascade automatically.
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,gpio-stp-xway
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description:
+      The first cell is the pin number and the second cell is used to specify
+      consumer flags.
+    const: 2
+
+  lantiq,shadow:
+    description:
+      The default value that we shall assume as already set on the
+      shift register cascade.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x000000
+    maximum: 0xffffff
+
+  lantiq,groups:
+    description:
+      Set the 3 bit mask to select which of the 3 groups are enabled
+      in the shift register cascade.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+  lantiq,dsl:
+    description:
+      The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
+      property can enable this feature.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x3
+
+  lantiq,rising:
+    description:
+      Use rising instead of falling edge for the shift register.
+    type: boolean
+
+patternProperties:
+  "^lantiq,phy[1-4]$":
+    description:
+      The gphy core can control 3 bits of the gpio cascade. In the xRX200 family
+      phy[1-2] are available, in xRX330 phy[1-3] and in XRX330 phy[1-4].
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@e100bb0 {
+        compatible = "lantiq,gpio-stp-xway";
+        reg = <0xE100BB0 0x40>;
+        #gpio-cells = <2>;
+        gpio-controller;
+
+        pinctrl-0 = <&stp_pins>;
+        pinctrl-names = "default";
+
+        lantiq,shadow = <0xffffff>;
+        lantiq,groups = <0x7>;
+        lantiq,dsl = <0x3>;
+        lantiq,phy1 = <0x7>;
+        lantiq,phy2 = <0x7>;
+    };
+...

Documentation/devicetree/bindings/gpio/gpio-zynq.txt

-Xilinx Zynq GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-- compatible		: Should be "xlnx,zynq-gpio-1.0" or
-			  "xlnx,zynqmp-gpio-1.0" or "xlnx,versal-gpio-1.0
-			  or "xlnx,pmc-gpio-1.0
-- clocks		: Clock specifier (see clock bindings for details)
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Marks the device node as an interrupt controller.
-- #interrupt-cells 	: Should be 2.  The first cell is the GPIO number.
-			  The second cell bits[3:0] is used to specify trigger type and level flags:
-			      1 = low-to-high edge triggered.
-			      2 = high-to-low edge triggered.
-			      4 = active high level-sensitive.
-			      8 = active low level-sensitive.
-- reg			: Address and length of the register set for the device
-
-Example:
-	gpio@e000a000 {
-		#gpio-cells = <2>;
-		compatible = "xlnx,zynq-gpio-1.0";
-		clocks = <&clkc 42>;
-		gpio-controller;
-		interrupt-parent = <&intc>;
-		interrupts = <0 20 4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		reg = <0xe000a000 0x1000>;
-	};

Documentation/devicetree/bindings/gpio/gpio-zynq.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-zynq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq GPIO controller Device Tree Bindings
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynq-gpio-1.0
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - interrupts
+  - gpio-controller
+  - interrupt-controller
+  - "#interrupt-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@e000a000 {
+      #gpio-cells = <2>;
+      compatible = "xlnx,zynq-gpio-1.0";
+      clocks = <&clkc 42>;
+      gpio-controller;
+      interrupt-parent = <&intc>;
+      interrupts = <0 20 4>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      reg = <0xe000a000 0x1000>;
+    };

Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/idt,32434-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79RC32434 GPIO controller
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: idt,32434-gpio
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: pic
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@50004 {
+        compatible = "idt,32434-gpio";
+        reg = <0x50004 0x10>, <0x38030 0x0c>;
+        reg-names = "gpio", "pic";
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <6>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        ngpios = <14>;
+    };

Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,pcf8575.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCF857x-compatible I/O expanders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
+  driven high by a pull-up current source or driven low to ground. This
+  combines the direction and output level into a single bit per line, which
+  can't be read back. We can't actually know at initialization time whether a
+  line is configured (a) as output and driving the signal low/high, or (b) as
+  input and reporting a low/high value, without knowing the last value written
+  since the chip came out of reset (if any). The only reliable solution for
+  setting up line direction is thus to do it explicitly.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max7328
+      - maxim,max7329
+      - nxp,pca8574
+      - nxp,pca8575
+      - nxp,pca9670
+      - nxp,pca9671
+      - nxp,pca9672
+      - nxp,pca9673
+      - nxp,pca9674
+      - nxp,pca9675
+      - nxp,pcf8574
+      - nxp,pcf8574a
+      - nxp,pcf8575
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies GPIO
+      flags, as defined in <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
+      and GPIO_ACTIVE_LOW flags are supported.
+
+  lines-initial-states:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask that specifies the initial state of each line.
+      When a bit is set to zero, the corresponding line will be initialized to
+      the input (pulled-up) state.
+      When the  bit is set to one, the line will be initialized to the
+      low-level output state.
+      If the property is not specified all lines will be initialized to the
+      input state.
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  wakeup-source: true
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pcf8575: gpio@20 {
+                    compatible = "nxp,pcf8575";
+                    reg = <0x20>;
+                    interrupt-parent = <&irqpin2>;
+                    interrupts = <3 0>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    interrupt-controller;
+                    #interrupt-cells = <2>;
+            };
+    };

Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt

-Rockchip RK3328 GRF (General Register Files) GPIO controller.
-
-In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute
-control, can also be used for general purpose. It is manipulated by the
-GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can
-also be set in the same way.
-
-Currently this GPIO controller only supports the mute pin. If needed in the
-future, the HDMI pins support can also be added.
-
-Required properties:
-- compatible: Should contain "rockchip,rk3328-grf-gpio".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be 2. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-    0 = Active high,
-    1 = Active low.
-
-Example:
-
-	grf: syscon@ff100000 {
-		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
-
-		grf_gpio: grf-gpio {
-			compatible = "rockchip,rk3328-grf-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-Note: The grf_gpio node should be declared as the child of the GRF (General
-Register File) node. The GPIO_MUTE pin is referred to as <&grf_gpio 0>.

Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3328 General Register Files GPIO controller
+
+description:
+  The Rockchip RK3328 General Register File (GRF) outputs only the
+  GPIO_MUTE pin, originally for codec mute control, but it can also be used
+  for general purpose. It is manipulated by the GRF_SOC_CON10 register.
+  If needed in the future support for the HDMI pins can also be added.
+  The GPIO node should be declared as the child of the GRF node.
+
+  The GPIO_MUTE pin is referred to in the format
+
+  <&grf_gpio 0 GPIO_ACTIVE_LOW>
+
+  The first cell is the pin number and
+  the second cell is used to specify the GPIO polarity
+    0 = Active high
+    1 = Active low
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3328-grf-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    grf_gpio: gpio {
+      compatible = "rockchip,rk3328-grf-gpio";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };

Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP GPIO controller bindings
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+  The general-purpose interface combines general-purpose input/output (GPIO) banks.
+  Each GPIO banks provides up to 32 dedicated general-purpose pins with input
+  and output capabilities; interrupt generation in active mode and wake-up
+  request generation in idle mode upon the detection of external events.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,omap2-gpio
+          - ti,omap3-gpio
+          - ti,omap4-gpio
+      - items:
+          - const: ti,am4372-gpio
+          - const: ti,omap4-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-ranges: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  ti,gpio-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if a GPIO bank is always powered and will never lose its logic state.
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+    description:
+      Name of the hwmod associated with the GPIO. Needed on some legacy OMAP
+      SoCs which have not been converted to the ti,sysc interconnect hierarachy.
+
+  ti,no-reset-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which
+      have not been converted to the ti,sysc interconnect hierarachy.
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio0: gpio@0 {
+        compatible = "ti,omap4-gpio";
+        reg = <0x0 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <96>;
+        ti,gpio-always-on;
+
+        ls-buf-en-hog {
+            gpio-hog;
+            gpios = <10 GPIO_ACTIVE_HIGH>;
+            output-high;
+            line-name = "LS_BUF_EN";
+        };
+    };

MAINTAINERS

@@ -13471,7 +13471,7 @@ M:	Santosh Shilimkar <ssantosh@kernel.org>
 M:	Kevin Hilman <khilman@kernel.org>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/gpio/gpio-omap.txt
+F:	Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
 F:	drivers/gpio/gpio-omap.c
 
 OMAP HARDWARE SPINLOCK SUPPORT
@@ -18448,7 +18448,7 @@ TI DAVINCI SERIES GPIO DRIVER
 M:	Keerthy <j-keerthy@ti.com>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+F:	Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
 F:	drivers/gpio/gpio-davinci.c
 
 TI DAVINCI SERIES MEDIA DRIVER

drivers/gpio/Kconfig

@@ -782,6 +782,18 @@ config GPIO_MSC313
 	  Say Y here to support the main GPIO block on MStar/SigmaStar
 	  ARMv7 based SoCs.
 
+config GPIO_IDT3243X
+	tristate "IDT 79RC3243X GPIO support"
+	depends on MIKROTIK_RB532 || COMPILE_TEST
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Select this option to enable GPIO driver for
+	  IDT 79RC3243X based devices like Mikrotik RB532.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-idt3243x.
+
 endmenu
 
 menu "Port-mapped I/O GPIO drivers"

drivers/gpio/Makefile

@@ -68,6 +68,7 @@ obj-$(CONFIG_GPIO_HISI)                 += gpio-hisi.o
 obj-$(CONFIG_GPIO_HLWD)			+= gpio-hlwd.o
 obj-$(CONFIG_HTC_EGPIO)			+= gpio-htc-egpio.o
 obj-$(CONFIG_GPIO_ICH)			+= gpio-ich.o
+obj-$(CONFIG_GPIO_IDT3243X)		+= gpio-idt3243x.o
 obj-$(CONFIG_GPIO_IOP)			+= gpio-iop.o
 obj-$(CONFIG_GPIO_IT87)			+= gpio-it87.o
 obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4xx.o

drivers/gpio/gpio-104-idio-16.c

@@ -44,11 +44,12 @@ struct idio_16_gpio {
 	struct gpio_chip chip;
 	raw_spinlock_t lock;
 	unsigned long irq_mask;
-	unsigned base;
-	unsigned out_state;
+	unsigned int base;
+	unsigned int out_state;
 };
 
-static int idio_16_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+static int idio_16_gpio_get_direction(struct gpio_chip *chip,
+				      unsigned int offset)
 {
 	if (offset > 15)
 		return GPIO_LINE_DIRECTION_IN;
@@ -56,22 +57,23 @@ static int idio_16_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	return GPIO_LINE_DIRECTION_OUT;
 }
 
-static int idio_16_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+static int idio_16_gpio_direction_input(struct gpio_chip *chip,
+					unsigned int offset)
 {
 	return 0;
 }
 
 static int idio_16_gpio_direction_output(struct gpio_chip *chip,
-	unsigned offset, int value)
+	unsigned int offset, int value)
 {
 	chip->set(chip, offset, value);
 	return 0;
 }
 
-static int idio_16_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int idio_16_gpio_get(struct gpio_chip *chip, unsigned int offset)
 {
 	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
-	const unsigned mask = BIT(offset-16);
+	const unsigned int mask = BIT(offset-16);
 
 	if (offset < 16)
 		return -EINVAL;
@@ -96,10 +98,11 @@ static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
 	return 0;
 }
 
-static void idio_16_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static void idio_16_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int value)
 {
 	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
-	const unsigned mask = BIT(offset);
+	const unsigned int mask = BIT(offset);
 	unsigned long flags;
 
 	if (offset > 15)
@@ -180,7 +183,7 @@ static void idio_16_irq_unmask(struct irq_data *data)
 	}
 }
 
-static int idio_16_irq_set_type(struct irq_data *data, unsigned flow_type)
+static int idio_16_irq_set_type(struct irq_data *data, unsigned int flow_type)
 {
 	/* The only valid irq types are none and both-edges */
 	if (flow_type != IRQ_TYPE_NONE &&

drivers/gpio/gpio-adp5520.c

@@ -113,10 +113,8 @@ static int adp5520_gpio_probe(struct platform_device *pdev)
 		if (pdata->gpio_en_mask & (1 << i))
 			dev->lut[gpios++] = 1 << i;
 
-	if (gpios < 1) {
-		ret = -EINVAL;
-		goto err;
-	}
+	if (gpios < 1)
+		return -EINVAL;
 
 	gc = &dev->gpio_chip;
 	gc->direction_input  = adp5520_gpio_direction_input;
@@ -148,18 +146,10 @@ static int adp5520_gpio_probe(struct platform_device *pdev)
 
 	if (ret) {
 		dev_err(&pdev->dev, "failed to write\n");
-		goto err;
+		return ret;
 	}
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &dev->gpio_chip, dev);
-	if (ret)
-		goto err;
-
-	platform_set_drvdata(pdev, dev);
-	return 0;
-
-err:
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &dev->gpio_chip, dev);
 }
 
 static struct platform_driver adp5520_gpio_driver = {

drivers/gpio/gpio-altera-a10sr.c

@@ -78,7 +78,6 @@ static const struct gpio_chip altr_a10sr_gc = {
 static int altr_a10sr_gpio_probe(struct platform_device *pdev)
 {
 	struct altr_a10sr_gpio *gpio;
-	int ret;
 	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
 
 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
@@ -91,15 +90,7 @@ static int altr_a10sr_gpio_probe(struct platform_device *pdev)
 	gpio->gp.parent = pdev->dev.parent;
 	gpio->gp.of_node = pdev->dev.of_node;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, gpio);
-
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
 }
 
 static const struct of_device_id altr_a10sr_gpio_of_match[] = {

drivers/gpio/gpio-ath79.c

@@ -234,7 +234,6 @@ static int ath79_gpio_probe(struct platform_device *pdev)
 	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl)
 		return -ENOMEM;
-	platform_set_drvdata(pdev, ctrl);
 
 	if (np) {
 		err = of_property_read_u32(np, "ngpios", &ath79_gpio_count);
@@ -290,13 +289,7 @@ static int ath79_gpio_probe(struct platform_device *pdev)
 		girq->handler = handle_simple_irq;
 	}
 
-	err = devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
-	if (err) {
-		dev_err(dev,
-			"cannot add AR71xx GPIO chip, error=%d", err);
-		return err;
-	}
-	return 0;
+	return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
 }
 
 static struct platform_driver ath79_gpio_driver = {

drivers/gpio/gpio-bd9571mwv.c

@@ -97,25 +97,16 @@ static const struct gpio_chip template_chip = {
 static int bd9571mwv_gpio_probe(struct platform_device *pdev)
 {
 	struct bd9571mwv_gpio *gpio;
-	int ret;
 
 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
 	if (!gpio)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, gpio);
-
 	gpio->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	gpio->chip = template_chip;
 	gpio->chip.parent = pdev->dev.parent;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
 }
 
 static const struct platform_device_id bd9571mwv_gpio_id_table[] = {

drivers/gpio/gpio-da9052.c

@@ -196,7 +196,6 @@ static int da9052_gpio_probe(struct platform_device *pdev)
 {
 	struct da9052_gpio *gpio;
 	struct da9052_pdata *pdata;
-	int ret;
 
 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
 	if (!gpio)
@@ -209,15 +208,7 @@ static int da9052_gpio_probe(struct platform_device *pdev)
 	if (pdata && pdata->gpio_base)
 		gpio->gp.base = pdata->gpio_base;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, gpio);
-
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
 }
 
 static struct platform_driver da9052_gpio_driver = {

drivers/gpio/gpio-da9055.c

@@ -133,7 +133,6 @@ static int da9055_gpio_probe(struct platform_device *pdev)
 {
 	struct da9055_gpio *gpio;
 	struct da9055_pdata *pdata;
-	int ret;
 
 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
 	if (!gpio)
@@ -146,15 +145,7 @@ static int da9055_gpio_probe(struct platform_device *pdev)
 	if (pdata && pdata->gpio_base)
 		gpio->gp.base = pdata->gpio_base;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, gpio);
-
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
 }
 
 static struct platform_driver da9055_gpio_driver = {

drivers/gpio/gpio-dwapb.c

@@ -13,17 +13,15 @@
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/irq.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
+#include <linux/platform_data/gpio-dwapb.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/reset.h>
-#include <linux/spinlock.h>
-#include <linux/platform_data/gpio-dwapb.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 
 #include "gpiolib.h"
 #include "gpiolib-acpi.h"
@@ -297,9 +295,6 @@ static int dwapb_irq_set_type(struct irq_data *d, u32 type)
 	irq_hw_number_t bit = irqd_to_hwirq(d);
 	unsigned long level, polarity, flags;
 
-	if (type & ~IRQ_TYPE_SENSE_MASK)
-		return -EINVAL;
-
 	spin_lock_irqsave(&gc->bgpio_lock, flags);
 	level = dwapb_read(gpio, GPIO_INTTYPE_LEVEL);
 	polarity = dwapb_read(gpio, GPIO_INT_POLARITY);
@@ -531,17 +526,13 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 static void dwapb_get_irq(struct device *dev, struct fwnode_handle *fwnode,
 			  struct dwapb_port_property *pp)
 {
-	struct device_node *np = NULL;
-	int irq = -ENXIO, j;
-
-	if (fwnode_property_read_bool(fwnode, "interrupt-controller"))
-		np = to_of_node(fwnode);
+	int irq, j;
 
 	for (j = 0; j < pp->ngpio; j++) {
-		if (np)
-			irq = of_irq_get(np, j);
-		else if (has_acpi_companion(dev))
+		if (has_acpi_companion(dev))
 			irq = platform_get_irq_optional(to_platform_device(dev), j);
+		else
+			irq = fwnode_irq_get(fwnode, j);
 		if (irq > 0)
 			pp->irq[j] = irq;
 	}

drivers/gpio/gpio-idt3243x.c

+// SPDX-License-Identifier: GPL-2.0
+/* Driver for IDT/Renesas 79RC3243x Interrupt Controller  */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define IDT_PIC_IRQ_PEND	0x00
+#define IDT_PIC_IRQ_MASK	0x08
+
+#define IDT_GPIO_DIR		0x00
+#define IDT_GPIO_DATA		0x04
+#define IDT_GPIO_ILEVEL		0x08
+#define IDT_GPIO_ISTAT		0x0C
+
+struct idt_gpio_ctrl {
+	struct gpio_chip gc;
+	void __iomem *pic;
+	void __iomem *gpio;
+	u32 mask_cache;
+};
+
+static void idt_gpio_dispatch(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct idt_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+	struct irq_chip *host_chip = irq_desc_get_chip(desc);
+	unsigned int bit, virq;
+	unsigned long pending;
+
+	chained_irq_enter(host_chip, desc);
+
+	pending = readl(ctrl->pic + IDT_PIC_IRQ_PEND);
+	pending &= ~ctrl->mask_cache;
+	for_each_set_bit(bit, &pending, gc->ngpio) {
+		virq = irq_linear_revmap(gc->irq.domain, bit);
+		if (virq)
+			generic_handle_irq(virq);
+	}
+
+	chained_irq_exit(host_chip, desc);
+}
+
+static int idt_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct idt_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+	unsigned int sense = flow_type & IRQ_TYPE_SENSE_MASK;
+	unsigned long flags;
+	u32 ilevel;
+
+	/* hardware only supports level triggered */
+	if (sense == IRQ_TYPE_NONE || (sense & IRQ_TYPE_EDGE_BOTH))
+		return -EINVAL;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	ilevel = readl(ctrl->gpio + IDT_GPIO_ILEVEL);
+	if (sense & IRQ_TYPE_LEVEL_HIGH)
+		ilevel |= BIT(d->hwirq);
+	else if (sense & IRQ_TYPE_LEVEL_LOW)
+		ilevel &= ~BIT(d->hwirq);
+
+	writel(ilevel, ctrl->gpio + IDT_GPIO_ILEVEL);
+	irq_set_handler_locked(d, handle_level_irq);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+	return 0;
+}
+
+static void idt_gpio_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct idt_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+
+	writel(~BIT(d->hwirq), ctrl->gpio + IDT_GPIO_ISTAT);
+}
+
+static void idt_gpio_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct idt_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	ctrl->mask_cache |= BIT(d->hwirq);
+	writel(ctrl->mask_cache, ctrl->pic + IDT_PIC_IRQ_MASK);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static void idt_gpio_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct idt_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	ctrl->mask_cache &= ~BIT(d->hwirq);
+	writel(ctrl->mask_cache, ctrl->pic + IDT_PIC_IRQ_MASK);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static int idt_gpio_irq_init_hw(struct gpio_chip *gc)
+{
+	struct idt_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+
+	/* Mask interrupts. */
+	ctrl->mask_cache = 0xffffffff;
+	writel(ctrl->mask_cache, ctrl->pic + IDT_PIC_IRQ_MASK);
+
+	return 0;
+}
+
+static struct irq_chip idt_gpio_irqchip = {
+	.name = "IDTGPIO",
+	.irq_mask = idt_gpio_mask,
+	.irq_ack = idt_gpio_ack,
+	.irq_unmask = idt_gpio_unmask,
+	.irq_set_type = idt_gpio_irq_set_type
+};
+
+static int idt_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_irq_chip *girq;
+	struct idt_gpio_ctrl *ctrl;
+	unsigned int parent_irq;
+	int ngpios;
+	int ret;
+
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	ctrl->gpio = devm_platform_ioremap_resource_byname(pdev, "gpio");
+	if (IS_ERR(ctrl->gpio))
+		return PTR_ERR(ctrl->gpio);
+
+	ctrl->gc.parent = dev;
+
+	ret = bgpio_init(&ctrl->gc, &pdev->dev, 4, ctrl->gpio + IDT_GPIO_DATA,
+			 NULL, NULL, ctrl->gpio + IDT_GPIO_DIR, NULL, 0);
+	if (ret) {
+		dev_err(dev, "bgpio_init failed\n");
+		return ret;
+	}
+
+	ret = device_property_read_u32(dev, "ngpios", &ngpios);
+	if (!ret)
+		ctrl->gc.ngpio = ngpios;
+
+	if (device_property_read_bool(dev, "interrupt-controller")) {
+		ctrl->pic = devm_platform_ioremap_resource_byname(pdev, "pic");
+		if (IS_ERR(ctrl->pic))
+			return PTR_ERR(ctrl->pic);
+
+		parent_irq = platform_get_irq(pdev, 0);
+		if (!parent_irq)
+			return -EINVAL;
+
+		girq = &ctrl->gc.irq;
+		girq->chip = &idt_gpio_irqchip;
+		girq->init_hw = idt_gpio_irq_init_hw;
+		girq->parent_handler = idt_gpio_dispatch;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(dev, girq->num_parents,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+
+		girq->parents[0] = parent_irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_bad_irq;
+	}
+
+	return devm_gpiochip_add_data(&pdev->dev, &ctrl->gc, ctrl);
+}
+
+static const struct of_device_id idt_gpio_of_match[] = {
+	{ .compatible = "idt,32434-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, idt_gpio_of_match);
+
+static struct platform_driver idt_gpio_driver = {
+	.probe = idt_gpio_probe,
+	.driver = {
+		.name = "idt3243x-gpio",
+		.of_match_table = idt_gpio_of_match,
+	},
+};
+module_platform_driver(idt_gpio_driver);
+
+MODULE_DESCRIPTION("IDT 79RC3243x GPIO/PIC Driver");
+MODULE_AUTHOR("Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
+MODULE_LICENSE("GPL");

drivers/gpio/gpio-logicvc.c

@@ -114,10 +114,8 @@ static int logicvc_gpio_probe(struct platform_device *pdev)
 		}
 
 		base = devm_ioremap_resource(dev, &res);
-		if (IS_ERR(base)) {
-			dev_err(dev, "Failed to map I/O base\n");
+		if (IS_ERR(base))
 			return PTR_ERR(base);
-		}
 
 		logicvc_gpio_regmap_config.max_register = resource_size(&res) -
 			logicvc_gpio_regmap_config.reg_stride;

drivers/gpio/gpio-mockup.c

@@ -144,12 +144,9 @@ static void gpio_mockup_set_multiple(struct gpio_chip *gc,
 static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip,
 				  unsigned int offset, int value)
 {
+	struct gpio_chip *gc = &chip->gc;
+	struct gpio_desc *desc = gpiochip_get_desc(gc, offset);
 	int curr, irq, irq_type, ret = 0;
-	struct gpio_desc *desc;
-	struct gpio_chip *gc;
-
-	gc = &chip->gc;
-	desc = &gc->gpiodev->descs[offset];
 
 	mutex_lock(&chip->lock);
 
@@ -369,7 +366,7 @@ static void gpio_mockup_debugfs_setup(struct device *dev,
 
 		priv->chip = chip;
 		priv->offset = i;
-		priv->desc = &gc->gpiodev->descs[i];
+		priv->desc = gpiochip_get_desc(gc, i);
 
 		debugfs_create_file(name, 0200, chip->dbg_dir, priv,
 				    &gpio_mockup_debugfs_ops);

drivers/gpio/gpio-mxs.c

@@ -229,14 +229,14 @@ static int mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 	return rv;
 }
 
-static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
 {
 	struct mxs_gpio_port *port = gpiochip_get_data(gc);
 
 	return irq_find_mapping(port->domain, offset);
 }
 
-static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
+static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
 {
 	struct mxs_gpio_port *port = gpiochip_get_data(gc);
 	u32 mask = 1 << offset;

drivers/gpio/gpio-pca953x.c

@@ -1241,6 +1241,7 @@ static const struct of_device_id pca953x_dt_ids[] = {
 
 	{ .compatible = "onnn,cat9554", .data = OF_953X( 8, PCA_INT), },
 	{ .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "onnn,pca9655", .data = OF_953X(16, PCA_INT), },
 
 	{ .compatible = "exar,xra1202", .data = OF_953X( 8, 0), },
 	{ }

drivers/gpio/gpio-regmap.c

@@ -178,12 +178,6 @@ static int gpio_regmap_direction_output(struct gpio_chip *chip,
 	return gpio_regmap_set_direction(chip, offset, true);
 }
 
-void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data)
-{
-	gpio->driver_data = data;
-}
-EXPORT_SYMBOL_GPL(gpio_regmap_set_drvdata);
-
 void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio)
 {
 	return gpio->driver_data;
@@ -226,6 +220,7 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
 		return ERR_PTR(-ENOMEM);
 
 	gpio->parent = config->parent;
+	gpio->driver_data = config->drvdata;
 	gpio->regmap = config->regmap;
 	gpio->ngpio_per_reg = config->ngpio_per_reg;
 	gpio->reg_stride = config->reg_stride;
@@ -311,9 +306,9 @@ void gpio_regmap_unregister(struct gpio_regmap *gpio)
 }
 EXPORT_SYMBOL_GPL(gpio_regmap_unregister);
 
-static void devm_gpio_regmap_unregister(struct device *dev, void *res)
+static void devm_gpio_regmap_unregister(void *res)
 {
-	gpio_regmap_unregister(*(struct gpio_regmap **)res);
+	gpio_regmap_unregister(res);
 }
 
 /**
@@ -330,20 +325,17 @@ static void devm_gpio_regmap_unregister(struct device *dev, void *res)
 struct gpio_regmap *devm_gpio_regmap_register(struct device *dev,
 					      const struct gpio_regmap_config *config)
 {
-	struct gpio_regmap **ptr, *gpio;
-
-	ptr = devres_alloc(devm_gpio_regmap_unregister, sizeof(*ptr),
-			   GFP_KERNEL);
-	if (!ptr)
-		return ERR_PTR(-ENOMEM);
+	struct gpio_regmap *gpio;
+	int ret;
 
 	gpio = gpio_regmap_register(config);
-	if (!IS_ERR(gpio)) {
-		*ptr = gpio;
-		devres_add(dev, ptr);
-	} else {
-		devres_free(ptr);
-	}
+
+	if (IS_ERR(gpio))
+		return gpio;
+
+	ret = devm_add_action_or_reset(dev, devm_gpio_regmap_unregister, gpio);
+	if (ret)
+		return ERR_PTR(ret);
 
 	return gpio;
 }

drivers/gpio/gpio-spear-spics.c

@@ -122,7 +122,6 @@ static int spics_gpio_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct spear_spics *spics;
-	int ret;
 
 	spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL);
 	if (!spics)
@@ -148,8 +147,6 @@ static int spics_gpio_probe(struct platform_device *pdev)
 				&spics->cs_enable_shift))
 		goto err_dt_data;
 
-	platform_set_drvdata(pdev, spics);
-
 	spics->chip.ngpio = NUM_OF_GPIO;
 	spics->chip.base = -1;
 	spics->chip.request = spics_request;
@@ -163,14 +160,7 @@ static int spics_gpio_probe(struct platform_device *pdev)
 	spics->chip.owner = THIS_MODULE;
 	spics->last_off = -1;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &spics->chip, spics);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to add gpio chip\n");
-		return ret;
-	}
-
-	dev_info(&pdev->dev, "spear spics registered\n");
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &spics->chip, spics);
 
 err_dt_data:
 	dev_err(&pdev->dev, "DT probe failed\n");

drivers/gpio/gpio-sprd.c

@@ -222,7 +222,6 @@ static int sprd_gpio_probe(struct platform_device *pdev)
 {
 	struct gpio_irq_chip *irq;
 	struct sprd_gpio *sprd_gpio;
-	int ret;
 
 	sprd_gpio = devm_kzalloc(&pdev->dev, sizeof(*sprd_gpio), GFP_KERNEL);
 	if (!sprd_gpio)
@@ -259,14 +258,7 @@ static int sprd_gpio_probe(struct platform_device *pdev)
 	irq->num_parents = 1;
 	irq->parents = &sprd_gpio->irq;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &sprd_gpio->chip, sprd_gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, sprd_gpio);
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &sprd_gpio->chip, sprd_gpio);
 }
 
 static const struct of_device_id sprd_gpio_of_match[] = {

drivers/gpio/gpio-sta2x11.c

@@ -398,15 +398,7 @@ static int gsta_probe(struct platform_device *dev)
 		return err;
 	}
 
-	err = devm_gpiochip_add_data(&dev->dev, &chip->gpio, chip);
-	if (err < 0) {
-		dev_err(&dev->dev, "sta2x11 gpio: Can't register (%i)\n",
-			-err);
-		return err;
-	}
-
-	platform_set_drvdata(dev, chip);
-	return 0;
+	return devm_gpiochip_add_data(&dev->dev, &chip->gpio, chip);
 }
 
 static struct platform_driver sta2x11_gpio_platform_driver = {

drivers/gpio/gpio-stmpe.c

@@ -449,6 +449,11 @@ static void stmpe_init_irq_valid_mask(struct gpio_chip *gc,
 	}
 }
 
+static void stmpe_gpio_disable(void *stmpe)
+{
+	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
+}
+
 static int stmpe_gpio_probe(struct platform_device *pdev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
@@ -461,7 +466,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	stmpe_gpio = kzalloc(sizeof(*stmpe_gpio), GFP_KERNEL);
+	stmpe_gpio = devm_kzalloc(&pdev->dev, sizeof(*stmpe_gpio), GFP_KERNEL);
 	if (!stmpe_gpio)
 		return -ENOMEM;
 
@@ -489,7 +494,11 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
 	if (ret)
-		goto out_free;
+		return ret;
+
+	ret = devm_add_action_or_reset(&pdev->dev, stmpe_gpio_disable, stmpe);
+	if (ret)
+		return ret;
 
 	if (irq > 0) {
 		struct gpio_irq_chip *girq;
@@ -499,7 +508,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 				"stmpe-gpio", stmpe_gpio);
 		if (ret) {
 			dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
-			goto out_disable;
+			return ret;
 		}
 
 		girq = &stmpe_gpio->chip.irq;
@@ -514,22 +523,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 		girq->init_valid_mask = stmpe_init_irq_valid_mask;
 	}
 
-	ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
-		goto out_disable;
-	}
-
-	platform_set_drvdata(pdev, stmpe_gpio);
-
-	return 0;
-
-out_disable:
-	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
-	gpiochip_remove(&stmpe_gpio->chip);
-out_free:
-	kfree(stmpe_gpio);
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &stmpe_gpio->chip, stmpe_gpio);
 }
 
 static struct platform_driver stmpe_gpio_driver = {

drivers/gpio/gpio-tc3589x.c

@@ -357,16 +357,7 @@ static int tc3589x_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &tc3589x_gpio->chip,
-				     tc3589x_gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, tc3589x_gpio);
-
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &tc3589x_gpio->chip, tc3589x_gpio);
 }
 
 static struct platform_driver tc3589x_gpio_driver = {

drivers/gpio/gpio-tegra186.c

@@ -730,18 +730,7 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
 		offset += port->pins;
 	}
 
-	platform_set_drvdata(pdev, gpio);
-
-	err = devm_gpiochip_add_data(&pdev->dev, &gpio->gpio, gpio);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-static int tegra186_gpio_remove(struct platform_device *pdev)
-{
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &gpio->gpio, gpio);
 }
 
 #define TEGRA186_MAIN_GPIO_PORT(_name, _bank, _port, _pins)	\
@@ -913,7 +902,6 @@ static struct platform_driver tegra186_gpio_driver = {
 		.of_match_table = tegra186_gpio_of_match,
 	},
 	.probe = tegra186_gpio_probe,
-	.remove = tegra186_gpio_remove,
 };
 module_platform_driver(tegra186_gpio_driver);
 

drivers/gpio/gpio-tps65218.c

@@ -187,7 +187,6 @@ static int tps65218_gpio_probe(struct platform_device *pdev)
 {
 	struct tps65218 *tps65218 = dev_get_drvdata(pdev->dev.parent);
 	struct tps65218_gpio *tps65218_gpio;
-	int ret;
 
 	tps65218_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps65218_gpio),
 				     GFP_KERNEL);
@@ -201,16 +200,8 @@ static int tps65218_gpio_probe(struct platform_device *pdev)
 	tps65218_gpio->gpio_chip.of_node = pdev->dev.of_node;
 #endif
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &tps65218_gpio->gpio_chip,
-				     tps65218_gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, tps65218_gpio);
-
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &tps65218_gpio->gpio_chip,
+				      tps65218_gpio);
 }
 
 static const struct of_device_id tps65218_dt_match[] = {

drivers/gpio/gpio-tps6586x.c

@@ -76,7 +76,6 @@ static int tps6586x_gpio_probe(struct platform_device *pdev)
 {
 	struct tps6586x_platform_data *pdata;
 	struct tps6586x_gpio *tps6586x_gpio;
-	int ret;
 
 	pdata = dev_get_platdata(pdev->dev.parent);
 	tps6586x_gpio = devm_kzalloc(&pdev->dev,
@@ -106,16 +105,8 @@ static int tps6586x_gpio_probe(struct platform_device *pdev)
 	else
 		tps6586x_gpio->gpio_chip.base = -1;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &tps6586x_gpio->gpio_chip,
-				     tps6586x_gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, tps6586x_gpio);
-
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &tps6586x_gpio->gpio_chip,
+				      tps6586x_gpio);
 }
 
 static struct platform_driver tps6586x_gpio_driver = {

drivers/gpio/gpio-tps65910.c

@@ -165,16 +165,8 @@ static int tps65910_gpio_probe(struct platform_device *pdev)
 	}
 
 skip_init:
-	ret = devm_gpiochip_add_data(&pdev->dev, &tps65910_gpio->gpio_chip,
-				     tps65910_gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, tps65910_gpio);
-
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &tps65910_gpio->gpio_chip,
+				      tps65910_gpio);
 }
 
 static struct platform_driver tps65910_gpio_driver = {

drivers/gpio/gpio-tps65912.c

@@ -99,7 +99,6 @@ static int tps65912_gpio_probe(struct platform_device *pdev)
 {
 	struct tps65912 *tps = dev_get_drvdata(pdev->dev.parent);
 	struct tps65912_gpio *gpio;
-	int ret;
 
 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
 	if (!gpio)
@@ -109,16 +108,7 @@ static int tps65912_gpio_probe(struct platform_device *pdev)
 	gpio->gpio_chip = template_chip;
 	gpio->gpio_chip.parent = tps->dev;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gpio_chip,
-				     gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, gpio);
-
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &gpio->gpio_chip, gpio);
 }
 
 static const struct platform_device_id tps65912_gpio_id_table[] = {

drivers/gpio/gpio-tps68470.c

@@ -125,7 +125,6 @@ static const char *tps68470_names[TPS68470_N_GPIO] = {
 static int tps68470_gpio_probe(struct platform_device *pdev)
 {
 	struct tps68470_gpio_data *tps68470_gpio;
-	int ret;
 
 	tps68470_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps68470_gpio),
 				     GFP_KERNEL);
@@ -146,16 +145,7 @@ static int tps68470_gpio_probe(struct platform_device *pdev)
 	tps68470_gpio->gc.base = -1;
 	tps68470_gpio->gc.parent = &pdev->dev;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &tps68470_gpio->gc,
-				     tps68470_gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to register gpio_chip: %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, tps68470_gpio);
-
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &tps68470_gpio->gc, tps68470_gpio);
 }
 
 static struct platform_driver tps68470_gpio_driver = {

drivers/gpio/gpio-visconti.c

@@ -187,15 +187,7 @@ static int visconti_gpio_probe(struct platform_device *pdev)
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_level_irq;
 
-	ret = devm_gpiochip_add_data(dev, &priv->gpio_chip, priv);
-	if (ret) {
-		dev_err(dev, "failed to add GPIO chip\n");
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, priv);
-
-	return ret;
+	return devm_gpiochip_add_data(dev, &priv->gpio_chip, priv);
 }
 
 static const struct of_device_id visconti_gpio_of_match[] = {

drivers/gpio/gpio-wm831x.c

@@ -261,7 +261,6 @@ static int wm831x_gpio_probe(struct platform_device *pdev)
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = &wm831x->pdata;
 	struct wm831x_gpio *wm831x_gpio;
-	int ret;
 
 	wm831x_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm831x_gpio),
 				   GFP_KERNEL);
@@ -280,16 +279,7 @@ static int wm831x_gpio_probe(struct platform_device *pdev)
 	wm831x_gpio->gpio_chip.of_node = wm831x->dev->of_node;
 #endif
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &wm831x_gpio->gpio_chip,
-				     wm831x_gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, wm831x_gpio);
-
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &wm831x_gpio->gpio_chip, wm831x_gpio);
 }
 
 static struct platform_driver wm831x_gpio_driver = {

drivers/gpio/gpio-wm8350.c

@@ -105,7 +105,6 @@ static int wm8350_gpio_probe(struct platform_device *pdev)
 	struct wm8350 *wm8350 = dev_get_drvdata(pdev->dev.parent);
 	struct wm8350_platform_data *pdata = dev_get_platdata(wm8350->dev);
 	struct wm8350_gpio_data *wm8350_gpio;
-	int ret;
 
 	wm8350_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8350_gpio),
 				   GFP_KERNEL);
@@ -121,16 +120,7 @@ static int wm8350_gpio_probe(struct platform_device *pdev)
 	else
 		wm8350_gpio->gpio_chip.base = -1;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &wm8350_gpio->gpio_chip,
-				     wm8350_gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, wm8350_gpio);
-
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &wm8350_gpio->gpio_chip, wm8350_gpio);
 }
 
 static struct platform_driver wm8350_gpio_driver = {

drivers/gpio/gpio-wm8994.c

@@ -263,7 +263,6 @@ static int wm8994_gpio_probe(struct platform_device *pdev)
 	struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
 	struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev);
 	struct wm8994_gpio *wm8994_gpio;
-	int ret;
 
 	wm8994_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8994_gpio),
 				   GFP_KERNEL);
@@ -279,17 +278,7 @@ static int wm8994_gpio_probe(struct platform_device *pdev)
 	else
 		wm8994_gpio->gpio_chip.base = -1;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &wm8994_gpio->gpio_chip,
-				     wm8994_gpio);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
-			ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, wm8994_gpio);
-
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &wm8994_gpio->gpio_chip, wm8994_gpio);
 }
 
 static struct platform_driver wm8994_gpio_driver = {

drivers/gpio/gpio-xgene.c

@@ -159,7 +159,6 @@ static SIMPLE_DEV_PM_OPS(xgene_gpio_pm, xgene_gpio_suspend, xgene_gpio_resume);
 static int xgene_gpio_probe(struct platform_device *pdev)
 {
 	struct xgene_gpio *gpio;
-	int err = 0;
 
 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
 	if (!gpio)
@@ -183,15 +182,7 @@ static int xgene_gpio_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, gpio);
 
-	err = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
-	if (err) {
-		dev_err(&pdev->dev,
-			"failed to register gpiochip.\n");
-		return err;
-	}
-
-	dev_info(&pdev->dev, "X-Gene GPIO driver registered.\n");
-	return 0;
+	return devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
 }
 
 static const struct of_device_id xgene_gpio_of_match[] = {

drivers/gpio/gpio-zynq.c

@@ -736,6 +736,11 @@ static int __maybe_unused zynq_gpio_suspend(struct device *dev)
 	struct zynq_gpio *gpio = dev_get_drvdata(dev);
 	struct irq_data *data = irq_get_irq_data(gpio->irq);
 
+	if (!data) {
+		dev_err(dev, "irq_get_irq_data() failed\n");
+		return -EINVAL;
+	}
+
 	if (!device_may_wakeup(dev))
 		disable_irq(gpio->irq);
 
@@ -753,6 +758,11 @@ static int __maybe_unused zynq_gpio_resume(struct device *dev)
 	struct irq_data *data = irq_get_irq_data(gpio->irq);
 	int ret;
 
+	if (!data) {
+		dev_err(dev, "irq_get_irq_data() failed\n");
+		return -EINVAL;
+	}
+
 	if (!device_may_wakeup(dev))
 		enable_irq(gpio->irq);
 
@@ -1001,8 +1011,11 @@ static int zynq_gpio_probe(struct platform_device *pdev)
 static int zynq_gpio_remove(struct platform_device *pdev)
 {
 	struct zynq_gpio *gpio = platform_get_drvdata(pdev);
+	int ret;
 
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		dev_warn(&pdev->dev, "pm_runtime_get_sync() Failed\n");
 	gpiochip_remove(&gpio->chip);
 	clk_disable_unprepare(gpio->clk);
 	device_set_wakeup_capable(&pdev->dev, 0);
@@ -1020,22 +1033,7 @@ static struct platform_driver zynq_gpio_driver = {
 	.remove = zynq_gpio_remove,
 };
 
-/**
- * zynq_gpio_init - Initial driver registration call
- *
- * Return: value from platform_driver_register
- */
-static int __init zynq_gpio_init(void)
-{
-	return platform_driver_register(&zynq_gpio_driver);
-}
-postcore_initcall(zynq_gpio_init);
-
-static void __exit zynq_gpio_exit(void)
-{
-	platform_driver_unregister(&zynq_gpio_driver);
-}
-module_exit(zynq_gpio_exit);
+module_platform_driver(zynq_gpio_driver);
 
 MODULE_AUTHOR("Xilinx Inc.");
 MODULE_DESCRIPTION("Zynq GPIO driver");

drivers/gpio/gpiolib-sysfs.c

@@ -66,9 +66,8 @@ static ssize_t direction_show(struct device *dev,
 	mutex_lock(&data->mutex);
 
 	gpiod_get_direction(desc);
-	status = sprintf(buf, "%s\n",
-			test_bit(FLAG_IS_OUT, &desc->flags)
-				? "out" : "in");
+	status = sysfs_emit(buf, "%s\n",
+			    test_bit(FLAG_IS_OUT, &desc->flags) ? "out" : "in");
 
 	mutex_unlock(&data->mutex);
 
@@ -109,13 +108,9 @@ static ssize_t value_show(struct device *dev,
 	mutex_lock(&data->mutex);
 
 	status = gpiod_get_value_cansleep(desc);
-	if (status < 0)
-		goto err;
+	if (status >= 0)
+		status = sysfs_emit(buf, "%zd\n", status);
 
-	buf[0] = '0' + status;
-	buf[1] = '\n';
-	status = 2;
-err:
 	mutex_unlock(&data->mutex);
 
 	return status;
@@ -249,11 +244,11 @@ static ssize_t edge_show(struct device *dev,
 	mutex_lock(&data->mutex);
 
 	for (i = 0; i < ARRAY_SIZE(trigger_types); i++) {
-		if (data->irq_flags == trigger_types[i].flags) {
-			status = sprintf(buf, "%s\n", trigger_types[i].name);
+		if (data->irq_flags == trigger_types[i].flags)
 			break;
-		}
 	}
+	if (i < ARRAY_SIZE(trigger_types))
+		status = sysfs_emit(buf, "%s\n", trigger_types[i].name);
 
 	mutex_unlock(&data->mutex);
 
@@ -312,10 +307,7 @@ static int gpio_sysfs_set_active_low(struct device *dev, int value)
 	if (!!test_bit(FLAG_ACTIVE_LOW, &desc->flags) == !!value)
 		return 0;
 
-	if (value)
-		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
-	else
-		clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
+	assign_bit(FLAG_ACTIVE_LOW, &desc->flags, value);
 
 	/* reconfigure poll(2) support if enabled on one edge only */
 	if (flags == GPIO_IRQF_TRIGGER_FALLING ||
@@ -336,8 +328,8 @@ static ssize_t active_low_show(struct device *dev,
 
 	mutex_lock(&data->mutex);
 
-	status = sprintf(buf, "%d\n",
-				!!test_bit(FLAG_ACTIVE_LOW, &desc->flags));
+	status = sysfs_emit(buf, "%d\n",
+			    !!test_bit(FLAG_ACTIVE_LOW, &desc->flags));
 
 	mutex_unlock(&data->mutex);
 
@@ -415,7 +407,7 @@ static ssize_t base_show(struct device *dev,
 {
 	const struct gpio_chip	*chip = dev_get_drvdata(dev);
 
-	return sprintf(buf, "%d\n", chip->base);
+	return sysfs_emit(buf, "%d\n", chip->base);
 }
 static DEVICE_ATTR_RO(base);
 
@@ -424,7 +416,7 @@ static ssize_t label_show(struct device *dev,
 {
 	const struct gpio_chip	*chip = dev_get_drvdata(dev);
 
-	return sprintf(buf, "%s\n", chip->label ? : "");
+	return sysfs_emit(buf, "%s\n", chip->label ?: "");
 }
 static DEVICE_ATTR_RO(label);
 
@@ -433,7 +425,7 @@ static ssize_t ngpio_show(struct device *dev,
 {
 	const struct gpio_chip	*chip = dev_get_drvdata(dev);
 
-	return sprintf(buf, "%u\n", chip->ngpio);
+	return sysfs_emit(buf, "%u\n", chip->ngpio);
 }
 static DEVICE_ATTR_RO(ngpio);
 

drivers/gpio/gpiolib.c

@@ -2004,9 +2004,6 @@ const char *gpiochip_is_requested(struct gpio_chip *gc, unsigned int offset)
 {
 	struct gpio_desc *desc;
 
-	if (offset >= gc->ngpio)
-		return NULL;
-
 	desc = gpiochip_get_desc(gc, offset);
 	if (IS_ERR(desc))
 		return NULL;
@@ -2543,21 +2540,28 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 
 	while (i < array_size) {
 		struct gpio_chip *gc = desc_array[i]->gdev->chip;
-		unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
+		DECLARE_BITMAP(fastpath_mask, FASTPATH_NGPIO);
+		DECLARE_BITMAP(fastpath_bits, FASTPATH_NGPIO);
 		unsigned long *mask, *bits;
 		int first, j;
 
 		if (likely(gc->ngpio <= FASTPATH_NGPIO)) {
-			mask = fastpath;
+			mask = fastpath_mask;
+			bits = fastpath_bits;
 		} else {
-			mask = kmalloc_array(2 * BITS_TO_LONGS(gc->ngpio),
-					   sizeof(*mask),
-					   can_sleep ? GFP_KERNEL : GFP_ATOMIC);
+			gfp_t flags = can_sleep ? GFP_KERNEL : GFP_ATOMIC;
+
+			mask = bitmap_alloc(gc->ngpio, flags);
 			if (!mask)
 				return -ENOMEM;
+
+			bits = bitmap_alloc(gc->ngpio, flags);
+			if (!bits) {
+				bitmap_free(mask);
+				return -ENOMEM;
+			}
 		}
 
-		bits = mask + BITS_TO_LONGS(gc->ngpio);
 		bitmap_zero(mask, gc->ngpio);
 
 		if (!can_sleep)
@@ -2580,8 +2584,10 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 
 		ret = gpio_chip_get_multiple(gc, mask, bits);
 		if (ret) {
-			if (mask != fastpath)
-				kfree(mask);
+			if (mask != fastpath_mask)
+				bitmap_free(mask);
+			if (bits != fastpath_bits)
+				bitmap_free(bits);
 			return ret;
 		}
 
@@ -2601,8 +2607,10 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 						       j);
 		}
 
-		if (mask != fastpath)
-			kfree(mask);
+		if (mask != fastpath_mask)
+			bitmap_free(mask);
+		if (bits != fastpath_bits)
+			bitmap_free(bits);
 	}
 	return 0;
 }
@@ -2826,21 +2834,28 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 
 	while (i < array_size) {
 		struct gpio_chip *gc = desc_array[i]->gdev->chip;
-		unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
+		DECLARE_BITMAP(fastpath_mask, FASTPATH_NGPIO);
+		DECLARE_BITMAP(fastpath_bits, FASTPATH_NGPIO);
 		unsigned long *mask, *bits;
 		int count = 0;
 
 		if (likely(gc->ngpio <= FASTPATH_NGPIO)) {
-			mask = fastpath;
+			mask = fastpath_mask;
+			bits = fastpath_bits;
 		} else {
-			mask = kmalloc_array(2 * BITS_TO_LONGS(gc->ngpio),
-					   sizeof(*mask),
-					   can_sleep ? GFP_KERNEL : GFP_ATOMIC);
+			gfp_t flags = can_sleep ? GFP_KERNEL : GFP_ATOMIC;
+
+			mask = bitmap_alloc(gc->ngpio, flags);
 			if (!mask)
 				return -ENOMEM;
+
+			bits = bitmap_alloc(gc->ngpio, flags);
+			if (!bits) {
+				bitmap_free(mask);
+				return -ENOMEM;
+			}
 		}
 
-		bits = mask + BITS_TO_LONGS(gc->ngpio);
 		bitmap_zero(mask, gc->ngpio);
 
 		if (!can_sleep)
@@ -2885,8 +2900,10 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 		if (count != 0)
 			gpio_chip_set_multiple(gc, mask, bits);
 
-		if (mask != fastpath)
-			kfree(mask);
+		if (mask != fastpath_mask)
+			bitmap_free(mask);
+		if (bits != fastpath_bits)
+			bitmap_free(bits);
 	}
 	return 0;
 }

include/linux/gpio/regmap.h

@@ -37,6 +37,9 @@ struct regmap;
  *			offset to a register/bitmask pair. If not
  *			given the default gpio_regmap_simple_xlate()
  *			is used.
+ * @drvdata:		(Optional) Pointer to driver specific data which is
+ *			not used by gpio-remap but is provided "as is" to the
+ *			driver callback(s).
  *
  * The ->reg_mask_xlate translates a given base address and GPIO offset to
  * register and mask pair. The base address is one of the given register
@@ -78,13 +81,14 @@ struct gpio_regmap_config {
 	int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
 			      unsigned int offset, unsigned int *reg,
 			      unsigned int *mask);
+
+	void *drvdata;
 };
 
 struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config);
 void gpio_regmap_unregister(struct gpio_regmap *gpio);
 struct gpio_regmap *devm_gpio_regmap_register(struct device *dev,
 					      const struct gpio_regmap_config *config);
-void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data);
 void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio);
 
 #endif /* _LINUX_GPIO_REGMAP_H */

lib/bitmap.c

@@ -793,8 +793,6 @@ int bitmap_parse(const char *start, unsigned int buflen,
 }
 EXPORT_SYMBOL(bitmap_parse);
 
-
-#ifdef CONFIG_NUMA
 /**
  * bitmap_pos_to_ord - find ordinal of set bit at given position in bitmap
  *	@buf: pointer to a bitmap
@@ -903,6 +901,7 @@ void bitmap_remap(unsigned long *dst, const unsigned long *src,
 			set_bit(bitmap_ord_to_pos(new, n % w, nbits), dst);
 	}
 }
+EXPORT_SYMBOL(bitmap_remap);
 
 /**
  * bitmap_bitremap - Apply map defined by a pair of bitmaps to a single bit
@@ -940,7 +939,9 @@ int bitmap_bitremap(int oldbit, const unsigned long *old,
 	else
 		return bitmap_ord_to_pos(new, n % w, bits);
 }
+EXPORT_SYMBOL(bitmap_bitremap);
 
+#ifdef CONFIG_NUMA
 /**
  * bitmap_onto - translate one bitmap relative to another
  *	@dst: resulting translated bitmap