Commit b8656c67 authored by Mikko Perttunen's avatar Mikko Perttunen Committed by Thierry Reding

arm64: tegra: Add device tree for the Tegra194 P2972-0000 board

Add device tree files for the Tegra194 P2972-0000 development board.
The board consists of the P2888 compute module and the P2822 baseboard.
Signed-off-by: default avatarMikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 5425fb15
......@@ -5,3 +5,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
// SPDX-License-Identifier: GPL-2.0
#include "tegra194.dtsi"
#include <dt-bindings/mfd/max77620.h>
/ {
model = "NVIDIA Tegra194 P2888 Processor Module";
compatible = "nvidia,p2888", "nvidia,tegra194";
aliases {
sdhci0 = "/cbb/sdhci@3460000";
sdhci1 = "/cbb/sdhci@3400000";
serial0 = &uartb;
i2c0 = "/bpmp/i2c";
i2c1 = "/cbb/i2c@3160000";
i2c2 = "/cbb/i2c@c240000";
i2c3 = "/cbb/i2c@3180000";
i2c4 = "/cbb/i2c@3190000";
i2c5 = "/cbb/i2c@31c0000";
i2c6 = "/cbb/i2c@c250000";
i2c7 = "/cbb/i2c@31e0000";
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = "serial0:115200n8";
};
cbb {
serial@3110000 {
status = "okay";
};
/* SDMMC1 (SD/MMC) */
sdhci@3400000 {
/*
cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
*/
};
/* SDMMC4 (eMMC) */
sdhci@3460000 {
status = "okay";
bus-width = <8>;
non-removable;
vqmmc-supply = <&vdd_1v8ls>;
vmmc-supply = <&vdd_emmc_3v3>;
};
pmc@c360000 {
nvidia,invert-interrupt;
};
};
bpmp {
i2c {
status = "okay";
pmic: pmic@3c {
compatible = "maxim,max20024";
reg = <0x3c>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
#gpio-cells = <2>;
gpio-controller;
pinctrl-names = "default";
pinctrl-0 = <&max20024_default>;
max20024_default: pinmux {
gpio0 {
pins = "gpio0";
function = "gpio";
};
gpio1 {
pins = "gpio1";
function = "fps-out";
maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
};
gpio2 {
pins = "gpio2";
function = "fps-out";
maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
};
gpio3 {
pins = "gpio3";
function = "fps-out";
maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
};
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull = <1>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull = <0>;
};
};
fps {
fps0 {
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
maxim,shutdown-fps-time-period-us = <640>;
};
fps1 {
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
maxim,shutdown-fps-time-period-us = <640>;
maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
};
fps2 {
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
maxim,shutdown-fps-time-period-us = <640>;
};
};
regulators {
in-sd0-supply = <&vdd_5v0_sys>;
in-sd1-supply = <&vdd_5v0_sys>;
in-sd2-supply = <&vdd_5v0_sys>;
in-sd3-supply = <&vdd_5v0_sys>;
in-sd4-supply = <&vdd_5v0_sys>;
in-ldo0-1-supply = <&vdd_5v0_sys>;
in-ldo2-supply = <&vdd_5v0_sys>;
in-ldo3-5-supply = <&vdd_5v0_sys>;
in-ldo4-6-supply = <&vdd_5v0_sys>;
in-ldo7-8-supply = <&vdd_1v8ls>;
sd0 {
regulator-name = "VDD_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
sd1 {
regulator-name = "VDD_1V8HS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8ls: sd2 {
regulator-name = "VDD_1V8LS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
sd3 {
regulator-name = "VDD_1V8AO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
sd4 {
regulator-name = "VDD_DDR_1V1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
ldo0 {
regulator-name = "VDD_RTC";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-always-on;
regulator-boot-on;
};
ldo2 {
regulator-name = "VDD_AO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
vdd_emmc_3v3: ldo3 {
regulator-name = "VDD_EMMC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo5 {
regulator-name = "VDD_USB_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo6 {
regulator-name = "VDD_SDIO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo7 {
regulator-name = "VDD_CSI_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_5v0_sys: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "VIN_SYS_5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
};
};
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "tegra194-p2888.dtsi"
/ {
model = "NVIDIA Tegra194 P2972-0000 Development Board";
compatible = "nvidia,p2972-0000", "nvidia,tegra194";
cbb {
/* SDMMC1 (SD/MMC) */
sdhci@3400000 {
status = "okay";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment