Skip to content

L
linux
Commit b89c940f authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'v6.6-rockchip-dts64-1' of... 

Merge tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE.

Many new peripherals for the still only basic supported rk3588 soc
(PCIe2, PCIe3, USB2, SATA, Combo-Phys).

Improvements to the Rock-5a development board based on this soc (saradc,
i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card,
some regulators, pmic).

Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata,
sata, sd-card, pmic)

RK3399 got the PCIe endpoint node when used as a PCIe-client.

And some minor changes for some boards: spi-flash for RockPi 4,
SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios
on engicam and gru boards.

* tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
  arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support
  arm64: dts: rockchip: add rk3588 PCIe2 support
  arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C
  arm64: dts: rockchip: Add NanoPC T6
  dt-bindings: arm: rockchip: Add NanoPC T6
  arm64: dts: rockchip: Enable SATA on Radxa E25
  arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
  arm64: dts: rockchip: switch px30-engicam to enable-gpios
  arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios
  arm64: dts: rockchip: add PCIe3 support for rk3588
  arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b
  arm64: dts: rockchip: add USB2 to rk3588s-rock5a
  arm64: dts: rockchip: add USB2 to rk3588-rock5b
  arm64: dts: rockchip: add USB2 to rk3588-evb1
  arm64: dts: rockchip: add USB2 support for rk3588
  arm64: dts: rockchip: Enable RS485 for edgeble-neu6b
  arm64: dts: rockchip: Enable RS232 for edgeble-neu6b
  arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b
  arm64: dts: rockchip: Enable RTC for edgeble-neu6b
  arm64: dts: rockchip: Enable SATA for edgeble-neu6b
  ...

Link: https://lore.kernel.org/r/7414564.rnE6jSC6OK@philSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents aa2951a8 a721e28d
Show whitespace changes
Inline Side-by-side
Showing with 3436 additions and 30 deletions
Documentation/devicetree/bindings/arm/rockchip.yaml
View file @ b89c940f
......@@ -196,6 +196,11 @@ properties:
- const: firefly,rk3566-roc-pc
- const: rockchip,rk3566
- description: Firefly Station P2
items:
- const: firefly,rk3568-roc-pc
- const: rockchip,rk3568
- description: FriendlyElec NanoPi R2 series boards
items:
- enum:
......@@ -222,6 +227,11 @@ properties:
- friendlyarm,nanopi-r5s
- const: rockchip,rk3568
- description: FriendlyElec NanoPC T6
items:
- const: friendlyarm,nanopc-t6
- const: rockchip,rk3588
- description: GeekBuying GeekBox
items:
- const: geekbuying,geekbox
......@@ -694,6 +704,11 @@ properties:
- const: radxa,rock-4c-plus
- const: rockchip,rk3399
- description: Radxa ROCK 4SE
items:
- const: radxa,rock-4se
- const: rockchip,rk3399
- description: Radxa ROCK Pi E
items:
- const: radxa,rockpi-e
......
Documentation/devicetree/bindings/eeprom/at24.yaml
View file @ b89c940f
......@@ -101,6 +101,9 @@ properties:
pattern: spd$
# These are special cases that don't conform to the above pattern.
# Each requires a standard at24 model as fallback.
- items:
- const: belling,bl24c16a
- const: atmel,24c16
- items:
- enum:
- rohm,br24g01
......
Documentation/devicetree/bindings/vendor-prefixes.yaml
View file @ b89c940f
......@@ -190,6 +190,8 @@ patternProperties:
description: Compass Electronics Group, LLC
"^beagle,.*":
description: BeagleBoard.org Foundation
"^belling,.*":
description: Shanghai Belling Co., Ltd.
"^bhf,.*":
description: Beckhoff Automation GmbH & Co. KG
"^bitmain,.*":
......
arch/arm64/boot/dts/rockchip/Makefile
View file @ b89c940f
......@@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4se.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
......@@ -94,10 +95,12 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
......
arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
View file @ b89c940f
......@@ -26,5 +26,5 @@ &sdio_pwrseq {
};
&vcc3v3_btreg {
enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
};
arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
View file @ b89c940f
......@@ -39,5 +39,5 @@ &sdio_pwrseq {
};
&vcc3v3_btreg {
enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
};
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
View file @ b89c940f
......@@ -250,7 +250,7 @@ ppvar_sd_card_io: ppvar-sd-card-io {
pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
enable-active-high;
enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
states = <1800000 0x1>,
<3000000 0x0>;
......
arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts 0 → 100644
View file @ b89c940f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
* Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
*/
/dts-v1/;
#include "rk3399-rock-pi-4.dtsi"
#include "rk3399-t-opp.dtsi"
/ {
model = "Radxa ROCK 4SE";
compatible = "radxa,rock-4se", "rockchip,rk3399";
aliases {
mmc2 = &sdio0;
};
};
&pinctrl {
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&sdio0 {
status = "okay";
brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
};
};
&uart0 {
status = "okay";
bluetooth {
compatible = "brcm,bcm4345c5";
clocks = <&rk808 1>;
clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
max-speed = <1500000>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
vbat-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc_1v8>;
};
};
&vcc5v0_host {
enable-active-high;
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
};
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
View file @ b89c940f
......@@ -9,7 +9,6 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
/ {
aliases {
......
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts
View file @ b89c940f
......@@ -6,8 +6,19 @@
/dts-v1/;
#include "rk3399-rock-pi-4.dtsi"
#include "rk3399-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4A";
compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
};
&spi1 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
};
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
View file @ b89c940f
......@@ -6,6 +6,7 @@
/dts-v1/;
#include "rk3399-rock-pi-4.dtsi"
#include "rk3399-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4B";
......@@ -30,6 +31,16 @@ brcmf: wifi@1 {
};
};
&spi1 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
};
&uart0 {
status = "okay";
......
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
View file @ b89c940f
......@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3399-rock-pi-4.dtsi"
#include "rk3399-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4C";
......@@ -42,6 +43,16 @@ &sound {
hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
};
&spi1 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
};
&uart0 {
status = "okay";
......
arch/arm64/boot/dts/rockchip/rk3399.dtsi
View file @ b89c940f
......@@ -265,6 +265,33 @@ pcie0_intc: interrupt-controller {
};
};
pcie0_ep: pcie-ep@f8000000 {
compatible = "rockchip,rk3399-pcie-ep";
reg = <0x0 0xfd000000 0x0 0x1000000>,
<0x0 0xfa000000 0x0 0x2000000>;
reg-names = "apb-base", "mem-base";
clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
<&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
clock-names = "aclk", "aclk-perf",
"hclk", "pm";
max-functions = /bits/ 8 <8>;
num-lanes = <4>;
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
<&cru SRST_A_PCIE>;
reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
"pm", "pclk", "aclk";
phys = <&pcie_phy 0>, <&pcie_phy 1>,
<&pcie_phy 2>, <&pcie_phy 3>;
phy-names = "pcie-phy-0", "pcie-phy-1",
"pcie-phy-2", "pcie-phy-3";
rockchip,max-outbound-regions = <32>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqnb_cpm>;
status = "disabled";
};
gmac: ethernet@fe300000 {
compatible = "rockchip,rk3399-gmac";
reg = <0x0 0xfe300000 0x0 0x10000>;
......
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
View file @ b89c940f
......@@ -47,6 +47,9 @@ vbus_typec: vbus-typec-regulator {
vin-supply = <&vcc5v0_sys>;
};
/* actually fed by vcc5v0_sys, dependent
* on pi6c clock generator
*/
vcc3v3_minipcie: vcc3v3-minipcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
......@@ -54,9 +57,9 @@ vcc3v3_minipcie: vcc3v3-minipcie-regulator {
pinctrl-names = "default";
pinctrl-0 = <&minipcie_enable_h>;
regulator-name = "vcc3v3_minipcie";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_pi6c_05>;
};
vcc3v3_ngff: vcc3v3-ngff-regulator {
......@@ -71,9 +74,6 @@ vcc3v3_ngff: vcc3v3-ngff-regulator {
vin-supply = <&vcc5v0_sys>;
};
/* actually fed by vcc5v0_sys, dependent
* on pi6c clock generator
*/
vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
compatible = "regulator-fixed";
enable-active-high;
......@@ -83,7 +83,7 @@ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
regulator-name = "vcc3v3_pcie30x1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_pi6c_05>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
......@@ -99,6 +99,10 @@ vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
};
};
&combphy1 {
phy-supply = <&vcc3v3_pcie30x1>;
};
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie20_reset_h>;
......@@ -117,7 +121,7 @@ &pcie3x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie30x1m0_pins>;
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie30x1>;
vpcie3v3-supply = <&vcc3v3_minipcie>;
status = "okay";
};
......@@ -178,6 +182,10 @@ &pwm12 {
status = "okay";
};
&sata1 {
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
......
arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts 0 → 100644
View file @ b89c940f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
model = "Firefly Station P2";
compatible = "firefly,rk3568-roc-pc", "rockchip,rk3568";
aliases {
ethernet0 = &gmac0;
ethernet1 = &gmac1;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
dc_12v: dc-12v-regulator {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
gmac0_clkin: external-gmac0-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac0_clkin";
#clock-cells = <0>;
};
gmac1_clkin: external-gmac1-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac1_clkin";
#clock-cells = <0>;
};
leds {
compatible = "gpio-leds";
led-user {
label = "user-led";
default-state = "on";
gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&user_led_enable_h>;
retain-state-suspended;
};
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
pcie30_avdd0v9: pcie30-avdd0v9-regulator {
compatible = "regulator-fixed";
regulator-name = "pcie30_avdd0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
vin-supply = <&vcc3v3_sys>;
};
pcie30_avdd1v8: pcie30-avdd1v8-regulator {
compatible = "regulator-fixed";
regulator-name = "pcie30_avdd1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc3v3_sys>;
};
vcc3v3_sys: vcc3v3-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pcie";
enable-active-high;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&vcc3v3_pcie_en_pin>;
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
startup-delay-us = <5000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-always-on;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_otg: vcc5v0-otg-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_otg";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_otg_en>;
vin-supply = <&vcc5v0_usb>;
};
};
&combphy0 {
/* used for USB3 */
status = "okay";
};
&combphy1 {
/* used for USB3 */
status = "okay";
};
&combphy2 {
/* used for SATA */
status = "okay";
};
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&gmac0_clkin>;
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus
&gmac0_clkinout>;
phy-handle = <&rgmii_phy0>;
phy-mode = "rgmii";
snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
tx_delay = <0x3c>;
rx_delay = <0x2f>;
status = "okay";
};
&gmac1 {
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim
&gmac1m1_tx_bus2
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_rgmii_bus
&gmac1m1_clkinout>;
phy-handle = <&rgmii_phy1>;
phy-mode = "rgmii";
snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
tx_delay = <0x4f>;
rx_delay = <0x26>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
rockchip,system-power-controller;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
wakeup-source;
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-name = "vdda_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-name = "vdda0v9_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-name = "vcc3v3_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
regulator-name = "vcca_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-name = "vcca1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
regulator-name = "vcc3v3_sd";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&i2s0_8ch {
status = "okay";
};
&mdio0 {
rgmii_phy0: phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
};
};
&mdio1 {
rgmii_phy1: phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
};
};
&pcie30phy {
status = "okay";
};
&pcie3x2 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pin>;
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pinctrl {
leds {
user_led_enable_h: user-led-enable-h {
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_otg_en: vcc5v0-otg-en {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie_reset_pin: pcie-reset-pin {
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins =
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio2-supply = <&vcc_1v8>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_1v8>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sata2 {
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&tsadc {
status = "okay";
};
&uart2 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy0_otg {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host0_xhci {
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi
View file @ b89c940f
......@@ -25,7 +25,6 @@ &sdhci {
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
......
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
View file @ b89c940f
......@@ -21,7 +21,73 @@ chosen {
};
};
&combphy0_ps {
status = "okay";
};
&i2c6 {
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clock-output-names = "hym8563";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
/* FAN */
&pwm2 {
pinctrl-0 = <&pwm2m1_pins>;
pinctrl-names = "default";
status = "okay";
};
&sata0 {
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
no-sdio;
no-mmc;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
/* RS232 */
&uart6 {
pinctrl-0 = <&uart6m0_xfer>;
pinctrl-names = "default";
status = "okay";
};
/* RS485 */
&uart7 {
pinctrl-0 = <&uart7m2_xfer>;
pinctrl-names = "default";
status = "okay";
};
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi
View file @ b89c940f
......@@ -18,6 +18,42 @@ vcc12v_dcin: vcc12v-dcin-regulator {
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_1v1_nldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
vin-supply = <&vcc5v0_sys>;
};
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&sdhci {
......@@ -25,8 +61,329 @@ &sdhci {
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
};
&spi2 {
status = "okay";
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
pmic@0 {
compatible = "rockchip,rk806";
spi-max-frequency = <1000000>;
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc5v0_sys>;
gpio-controller;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
regulator-name = "vdd_gpu_s0";
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <400>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-name = "vdd_log_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
regulator-name = "vdd_vdenc_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-init-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-name = "vdd_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-name = "vdd2_ddr_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-name = "vdd_2v0_pldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-name = "vddq_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-name = "vcc_1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avcc_1v8_s0: pldo-reg1 {
regulator-name = "avcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s0: pldo-reg2 {
regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avdd_1v2_s0: pldo-reg3 {
regulator-name = "avdd_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_s0: pldo-reg4 {
regulator-name = "vcc_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-name = "vccio_sd_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-name = "pldo6_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-name = "vdd_0v75_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_ddr_pll_s0: nldo-reg2 {
regulator-name = "vdd_ddr_pll_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
avdd_0v75_s0: nldo-reg3 {
regulator-name = "avdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v85_s0: nldo-reg4 {
regulator-name = "vdd_0v85_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v75_s0: nldo-reg5 {
regulator-name = "vdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
View file @ b89c940f
......@@ -38,6 +38,20 @@ vcc12v_dcin: vcc12v-dcin-regulator {
regulator-max-microvolt = <12000000>;
};
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
......@@ -47,6 +61,30 @@ vcc5v0_sys: vcc5v0-sys-regulator {
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usbdcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usbdcin>;
};
};
&combphy0_ps {
status = "okay";
};
&cpu_b0 {
......@@ -138,6 +176,12 @@ hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm2 {
......@@ -149,7 +193,6 @@ &sdhci {
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
......@@ -760,7 +803,45 @@ regulator-state-mem {
};
};
&sata0 {
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts 0 → 100644
View file @ b89c940f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
* Copyright (c) 2023 Thomas McKahan
*
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
/ {
model = "FriendlyElec NanoPC-T6";
compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
serial2 = &uart2;
};
chosen {
stdout-path = "serial2:1500000n8";
};
leds {
compatible = "gpio-leds";
sys_led: led-0 {
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
label = "system-led";
linux,default-trigger = "heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&sys_led_pin>;
};
usr_led: led-1 {
gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
label = "user-led";
pinctrl-names = "default";
pinctrl-0 = <&usr_led_pin>;
};
};
sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&hp_det>;
simple-audio-card,name = "realtek,rt5616-codec";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
simple-audio-card,hp-pin-name = "Headphones";
simple-audio-card,widgets =
"Headphone", "Headphones",
"Microphone", "Microphone Jack";
simple-audio-card,routing =
"Headphones", "HPOL",
"Headphones", "HPOR",
"MIC1", "Microphone Jack",
"Microphone Jack", "micbias1";
simple-audio-card,cpu {
sound-dai = <&i2s0_8ch>;
};
simple-audio-card,codec {
sound-dai = <&rt5616>;
};
};
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
/* vcc5v0_sys powers peripherals */
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
/* vcc4v0_sys powers the RK806, RK860's */
vcc4v0_sys: vcc4v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc4v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc-1v1-nldo-s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
vin-supply = <&vcc4v0_sys>;
};
vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_pcie20";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_s3>;
};
vbus5v0_typec: vbus5v0-typec-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&typec5v_pwren>;
regulator-name = "vbus5v0_typec";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_m2_0_pwren>;
regulator-name = "vcc3v3_pcie30";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
};
&combphy0_ps {
status = "okay";
};
&combphy1_ps {
status = "okay";
};
&combphy2_psu {
status = "okay";
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_b0{
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1{
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2{
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3{
cpu-supply = <&vdd_cpu_big1_s0>;
};
&gpio0 {
gpio-line-names = /* GPIO0 A0-A7 */
"", "", "", "",
"", "", "", "",
/* GPIO0 B0-B7 */
"", "", "", "",
"", "", "", "",
/* GPIO0 C0-C7 */
"", "", "", "",
"HEADER_10", "HEADER_08", "HEADER_32", "",
/* GPIO0 D0-D7 */
"", "", "", "",
"", "", "", "";
};
&gpio1 {
gpio-line-names = /* GPIO1 A0-A7 */
"HEADER_27", "HEADER_28", "", "",
"", "", "", "HEADER_15",
/* GPIO1 B0-B7 */
"HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
"HEADER_24", "HEADER_22", "", "",
/* GPIO1 C0-C7 */
"", "", "", "",
"", "", "", "",
/* GPIO1 D0-D7 */
"", "", "", "",
"", "", "HEADER_05", "HEADER_03";
};
&gpio2 {
gpio-line-names = /* GPIO2 A0-A7 */
"", "", "", "",
"", "", "", "",
/* GPIO2 B0-B7 */
"", "", "", "",
"", "", "", "",
/* GPIO2 C0-C7 */
"", "CSI1_11", "CSI1_12", "",
"", "", "", "",
/* GPIO2 D0-D7 */
"", "", "", "",
"", "", "", "";
};
&gpio3 {
gpio-line-names = /* GPIO3 A0-A7 */
"HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
"HEADER_37", "", "DSI0_12", "",
/* GPIO3 B0-B7 */
"HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
"HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
/* GPIO3 C0-C7 */
"DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
"", "", "", "",
/* GPIO3 D0-D7 */
"", "", "", "",
"", "DSI1_10", "", "";
};
&gpio4 {
gpio-line-names = /* GPIO4 A0-A7 */
"DSI1_08", "DSI1_14", "", "DSI1_12",
"", "", "", "",
/* GPIO4 B0-B7 */
"", "", "", "",
"", "", "", "",
/* GPIO4 C0-C7 */
"", "", "", "",
"CSI0_11", "CSI0_12", "", "",
/* GPIO4 D0-D7 */
"", "", "", "",
"", "", "", "";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c2 {
status = "okay";
vdd_npu_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
rockchip,suspend-voltage-selector = <1>;
regulator-name = "vdd_npu_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c6 {
clock-frequency = <200000>;
status = "okay";
fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&usbc0_int>;
pinctrl-names = "default";
vbus-supply = <&vbus5v0_typec>;
connector {
compatible = "usb-c-connector";
data-role = "dual";
label = "USB-C";
power-role = "dual";
try-power-role = "sink";
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
op-sink-microwatt = <1000000>;
};
};
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-output-names = "hym8563";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
};
&i2c7 {
clock-frequency = <200000>;
status = "okay";
rt5616: codec@1b {
compatible = "realtek,rt5616";
reg = <0x1b>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
clock-names = "mclk";
#sound-dai-cells = <0>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
port {
rt5616_p0_0: endpoint {
remote-endpoint = <&i2s0_8ch_p0_0>;
};
};
};
/* connected with MIPI-CSI1 */
};
&i2c8 {
pinctrl-0 = <&i2c8m2_xfer>;
};
&i2s0_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s0_lrck
&i2s0_mclk
&i2s0_sclk
&i2s0_sdi0
&i2s0_sdo0>;
status = "okay";
i2s0_8ch_p0: port {
i2s0_8ch_p0_0: endpoint {
dai-format = "i2s";
mclk-fs = <256>;
remote-endpoint = <&rt5616_p0_0>;
};
};
};
&pcie2x1l0 {
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_pcie20>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2_0_rst>;
status = "okay";
};
&pcie2x1l2 {
reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_pcie20>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2_2_rst>;
status = "okay";
};
&pcie30phy {
status = "okay";
};
&pcie3x4 {
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie30>;
status = "okay";
};
&pinctrl {
gpio-leds {
sys_led_pin: sys-led-pin {
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
usr_led_pin: usr-led-pin {
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
headphone {
hp_det: hp-det {
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pcie {
pcie2_0_rst: pcie2-0-rst {
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie2_2_rst: pcie2-2-rst {
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie_m2_0_pwren: pcie-m20-pwren {
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
typec5v_pwren: typec5v-pwren {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbc0_int: usbc0-int {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pwm1 {
pinctrl-0 = <&pwm1m1_pins>;
status = "okay";
};
&saradc {
vref-supply = <&avcc_1v8_s0>;
status = "okay";
};
&sdhci {
bus-width = <8>;
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
};
&sdmmc {
max-frequency = <200000000>;
no-sdio;
no-mmc;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&spi2 {
status = "okay";
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
num-cs = <1>;
pmic@0 {
compatible = "rockchip,rk806";
spi-max-frequency = <1000000>;
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
vcc1-supply = <&vcc4v0_sys>;
vcc2-supply = <&vcc4v0_sys>;
vcc3-supply = <&vcc4v0_sys>;
vcc4-supply = <&vcc4v0_sys>;
vcc5-supply = <&vcc4v0_sys>;
vcc6-supply = <&vcc4v0_sys>;
vcc7-supply = <&vcc4v0_sys>;
vcc8-supply = <&vcc4v0_sys>;
vcc9-supply = <&vcc4v0_sys>;
vcc10-supply = <&vcc4v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc4v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc4v0_sys>;
gpio-controller;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_gpu_s0";
regulator-enable-ramp-delay = <400>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_cpu_lit_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_log_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-init-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_vdenc_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd2_ddr_s3";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_2v0_pldo_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_3v3_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vddq_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avcc_1v8_s0: pldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "avcc_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s0: pldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avdd_1v2_s0: pldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "avdd_1v2_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_s0: pldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_3v3_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-name = "vccio_sd_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "pldo6_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "vdd_0v75_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_ddr_pll_s0: nldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-name = "vdd_ddr_pll_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
avdd_0v75_s0: nldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "avdd_0v75_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v85_s0: nldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-name = "vdd_0v85_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v75_s0: nldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "vdd_0v75_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&tsadc {
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&u2phy2_host {
status = "okay";
};
&u2phy3_host {
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy3 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
View file @ b89c940f
......@@ -11,6 +11,7 @@ / {
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
serial2 = &uart2;
};
......@@ -18,17 +19,9 @@ chosen {
stdout-path = "serial2:1500000n8";
};
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 95 145 195 255>;
fan-supply = <&vcc5v0_sys>;
pwms = <&pwm1 0 50000 0>;
#cooling-cells = <2>;
};
sound {
analog-sound {
compatible = "audio-graph-card";
label = "Analog";
label = "rk3588-es8316";
widgets = "Microphone", "Mic Jack",
"Headphone", "Headphones";
......@@ -43,6 +36,28 @@ sound {
pinctrl-0 = <&hp_detect>;
};
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 95 145 195 255>;
fan-supply = <&vcc5v0_sys>;
pwms = <&pwm1 0 50000 0>;
#cooling-cells = <2>;
};
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
......@@ -201,6 +216,12 @@ hp_detect: hp-detect {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm1 {
......@@ -217,7 +238,6 @@ &sdhci {
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
......@@ -230,6 +250,7 @@ &sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
......@@ -565,3 +586,38 @@ &uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
/* connected to USB hub, which is powered by vcc5v0_sys */
phy-supply = <&vcc5v0_sys>;
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
arch/arm64/boot/dts/rockchip/rk3588.dtsi
View file @ b89c940f
......@@ -7,6 +7,16 @@
#include "rk3588-pinctrl.dtsi"
/ {
pcie30_phy_grf: syscon@fd5b8000 {
compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
reg = <0x0 0xfd5b8000 0x0 0x10000>;
};
pipe_phy1_grf: syscon@fd5c0000 {
compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
reg = <0x0 0xfd5c0000 0x0 0x100>;
};
i2s8_8ch: i2s@fddc8000 {
compatible = "rockchip,rk3588-i2s-tdm";
reg = <0x0 0xfddc8000 0x0 0x1000>;
......@@ -75,6 +85,159 @@ i2s10_8ch: i2s@fde00000 {
status = "disabled";
};
pcie3x4: pcie@fe150000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0x0f>;
clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
<&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
<&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
<0 0 0 2 &pcie3x4_intc 1>,
<0 0 0 3 &pcie3x4_intc 2>,
<0 0 0 4 &pcie3x4_intc 3>;
linux,pci-domain = <0>;
max-link-speed = <3>;
msi-map = <0x0000 &its1 0x0000 0x1000>;
num-lanes = <4>;
phys = <&pcie30phy>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
<0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
reg = <0xa 0x40000000 0x0 0x00400000>,
<0x0 0xfe150000 0x0 0x00010000>,
<0x0 0xf0000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
reset-names = "pwr", "pipe";
status = "disabled";
pcie3x4_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
};
};
pcie3x2: pcie@fe160000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x10 0x1f>;
clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
<&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
<&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
<0 0 0 2 &pcie3x2_intc 1>,
<0 0 0 3 &pcie3x2_intc 2>,
<0 0 0 4 &pcie3x2_intc 3>;
linux,pci-domain = <1>;
max-link-speed = <3>;
msi-map = <0x1000 &its1 0x1000 0x1000>;
num-lanes = <2>;
phys = <&pcie30phy>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
<0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
reg = <0xa 0x40400000 0x0 0x00400000>,
<0x0 0xfe160000 0x0 0x00010000>,
<0x0 0xf1000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
reset-names = "pwr", "pipe";
status = "disabled";
pcie3x2_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
};
};
pcie2x1l0: pcie@fe170000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
bus-range = <0x20 0x2f>;
clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
<&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
<&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
<0 0 0 2 &pcie2x1l0_intc 1>,
<0 0 0 3 &pcie2x1l0_intc 2>,
<0 0 0 4 &pcie2x1l0_intc 3>;
linux,pci-domain = <2>;
max-link-speed = <2>;
msi-map = <0x2000 &its0 0x2000 0x1000>;
num-lanes = <1>;
phys = <&combphy1_ps PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
<0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
reg = <0xa 0x40800000 0x0 0x00400000>,
<0x0 0xfe170000 0x0 0x00010000>,
<0x0 0xf2000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
reset-names = "pwr", "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie2x1l0_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
};
};
gmac0: ethernet@fe1b0000 {
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
reg = <0x0 0xfe1b0000 0x0 0x10000>;
......@@ -123,4 +286,56 @@ gmac0_mtl_tx_setup: tx-queues-config {
queue1 {};
};
};
sata1: sata@fe220000 {
compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
reg = <0 0xfe220000 0 0x1000>;
interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
<&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
<&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
ports-implemented = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata-port@0 {
reg = <0>;
hba-port-cap = <HBA_PORT_FBSCP>;
phys = <&combphy1_ps PHY_TYPE_SATA>;
phy-names = "sata-phy";
snps,rx-ts-max = <32>;
snps,tx-ts-max = <32>;
};
};
combphy1_ps: phy@fee10000 {
compatible = "rockchip,rk3588-naneng-combphy";
reg = <0x0 0xfee10000 0x0 0x100>;
clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
<&cru PCLK_PHP_ROOT>;
clock-names = "ref", "apb", "pipe";
assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
assigned-clock-rates = <100000000>;
#phy-cells = <1>;
resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
reset-names = "phy", "apb";
rockchip,pipe-grf = <&php_grf>;
rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
status = "disabled";
};
pcie30phy: phy@fee80000 {
compatible = "rockchip,rk3588-pcie3-phy";
reg = <0x0 0xfee80000 0x0 0x20000>;
#phy-cells = <0>;
clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
clock-names = "pclk";
resets = <&cru SRST_PCIE30_PHY>;
reset-names = "phy";
rockchip,pipe-grf = <&php_grf>;
rockchip,phy-grf = <&pcie30_phy_grf>;
status = "disabled";
};
};
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
View file @ b89c940f
......@@ -401,7 +401,6 @@ &sdhci {
no-sd;
no-sdio;
non-removable;
max-frequency = <200000000>;
vmmc-supply = <&vcc_3v3_s0>;
vqmmc-supply = <&vcc_1v8_s3>;
status = "okay";
......@@ -429,7 +428,6 @@ &sdmmc {
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
max-frequency = <200000000>;
no-sdio;
no-mmc;
sd-uhs-sdr104;
......
arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
View file @ b89c940f
......@@ -25,7 +25,6 @@ &sdhci {
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
......
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
View file @ b89c940f
......@@ -3,6 +3,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3588s.dtsi"
......@@ -12,12 +13,252 @@ / {
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
serial2 = &uart2;
};
analog-sound {
compatible = "audio-graph-card";
label = "rk3588-es8316";
widgets = "Microphone", "Mic Jack",
"Headphone", "Headphones";
routing = "MIC2", "Mic Jack",
"Headphones", "HPOL",
"Headphones", "HPOR";
dais = <&i2s0_8ch_p0>;
};
chosen {
stdout-path = "serial2:1500000n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&io_led>;
io-led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 95 145 195 255>;
fan-supply = <&vcc_5v0>;
pwms = <&pwm3 0 50000 0>;
#cooling-cells = <2>;
};
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc_5v0: vcc-5v0-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
enable-active-high;
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc_5v0_en>;
vin-supply = <&vcc5v0_sys>;
};
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_1v1_nldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
vin-supply = <&vcc5v0_sys>;
};
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c2 {
status = "okay";
vdd_npu_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_npu_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
eeprom: eeprom@50 {
compatible = "belling,bl24c16a", "atmel,24c16";
reg = <0x50>;
pagesize = <16>;
};
};
&i2c3 {
status = "okay";
};
&i2c5 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c5m2_xfer>;
};
&i2c7 {
status = "okay";
es8316: audio-codec@11 {
compatible = "everest,es8316";
reg = <0x11>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
clock-names = "mclk";
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
#sound-dai-cells = <0>;
port {
es8316_p0_0: endpoint {
remote-endpoint = <&i2s0_8ch_p0_0>;
};
};
};
};
&i2s0_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s0_lrck
&i2s0_mclk
&i2s0_sclk
&i2s0_sdi0
&i2s0_sdo0>;
status = "okay";
i2s0_8ch_p0: port {
i2s0_8ch_p0_0: endpoint {
dai-format = "i2s";
mclk-fs = <256>;
remote-endpoint = <&es8316_p0_0>;
};
};
};
&gmac1 {
......@@ -49,11 +290,62 @@ rgmii_phy1: ethernet-phy@1 {
};
&pinctrl {
leds {
io_led: io-led {
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
power {
vcc_5v0_en: vcc-5v0-en {
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
rtl8211f {
rtl8211f_rst: rtl8211f-rst {
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wifibt {
wl_reset: wl-reset {
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
};
wl_dis: wl-dis {
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_output_high>;
};
wl_wake_host: wl-wake-host {
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
};
bt_dis: bt-dis {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>;
};
bt_wake_host: bt-wake-host {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pwm3m1_pins>;
status = "okay";
};
&saradc {
vref-supply = <&avcc_1v8_s0>;
status = "okay";
};
&sdhci {
......@@ -61,13 +353,384 @@ &sdhci {
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
no-mmc;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s0>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&spi2 {
status = "okay";
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc5v0_sys>;
gpio-controller;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
regulator-name = "vdd_gpu_s0";
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <400>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-name = "vdd_log_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
regulator-name = "vdd_vdenc_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-name = "vdd_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-name = "vdd2_ddr_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-name = "vdd_2v0_pldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-name = "vddq_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-name = "vcc_1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avcc_1v8_s0: pldo-reg1 {
regulator-name = "avcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s0: pldo-reg2 {
regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avdd_1v2_s0: pldo-reg3 {
regulator-name = "avdd_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_s0: pldo-reg4 {
regulator-name = "vcc_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-name = "vccio_sd_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-name = "pldo6_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-name = "vdd_0v75_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_ddr_pll_s0: nldo-reg2 {
regulator-name = "vdd_ddr_pll_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
avdd_0v75_s0: nldo-reg3 {
regulator-name = "avdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v85_s0: nldo-reg4 {
regulator-name = "vdd_0v85_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v75_s0: nldo-reg5 {
regulator-name = "vdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
status = "okay";
phy-supply = <&vcc5v0_host>;
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wl_reset &wl_dis &wl_wake_host &bt_dis &bt_wake_host>;
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
arch/arm64/boot/dts/rockchip/rk3588s.dtsi
View file @ b89c940f
......@@ -8,6 +8,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/rk3588-power.h>
#include <dt-bindings/reset/rockchip,rk3588-cru.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/ata/ahci.h>
/ {
compatible = "rockchip,rk3588";
......@@ -397,6 +399,50 @@ scmi_shmem: sram@0 {
};
};
usb_host0_ehci: usb@fc800000 {
compatible = "rockchip,rk3588-ehci", "generic-ehci";
reg = <0x0 0xfc800000 0x0 0x40000>;
interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
phys = <&u2phy2_host>;
phy-names = "usb";
power-domains = <&power RK3588_PD_USB>;
status = "disabled";
};
usb_host0_ohci: usb@fc840000 {
compatible = "rockchip,rk3588-ohci", "generic-ohci";
reg = <0x0 0xfc840000 0x0 0x40000>;
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
phys = <&u2phy2_host>;
phy-names = "usb";
power-domains = <&power RK3588_PD_USB>;
status = "disabled";
};
usb_host1_ehci: usb@fc880000 {
compatible = "rockchip,rk3588-ehci", "generic-ehci";
reg = <0x0 0xfc880000 0x0 0x40000>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
phys = <&u2phy3_host>;
phy-names = "usb";
power-domains = <&power RK3588_PD_USB>;
status = "disabled";
};
usb_host1_ohci: usb@fc8c0000 {
compatible = "rockchip,rk3588-ohci", "generic-ohci";
reg = <0x0 0xfc8c0000 0x0 0x40000>;
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
phys = <&u2phy3_host>;
phy-names = "usb";
power-domains = <&power RK3588_PD_USB>;
status = "disabled";
};
sys_grf: syscon@fd58c000 {
compatible = "rockchip,rk3588-sys-grf", "syscon";
reg = <0x0 0xfd58c000 0x0 0x1000>;
......@@ -407,6 +453,66 @@ php_grf: syscon@fd5b0000 {
reg = <0x0 0xfd5b0000 0x0 0x1000>;
};
pipe_phy0_grf: syscon@fd5bc000 {
compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
reg = <0x0 0xfd5bc000 0x0 0x100>;
};
pipe_phy2_grf: syscon@fd5c4000 {
compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
reg = <0x0 0xfd5c4000 0x0 0x100>;
};
usb2phy2_grf: syscon@fd5d8000 {
compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
reg = <0x0 0xfd5d8000 0x0 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
u2phy2: usb2-phy@8000 {
compatible = "rockchip,rk3588-usb2phy";
reg = <0x8000 0x10>;
interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
reset-names = "phy", "apb";
clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
clock-names = "phyclk";
clock-output-names = "usb480m_phy2";
#clock-cells = <0>;
status = "disabled";
u2phy2_host: host-port {
#phy-cells = <0>;
status = "disabled";
};
};
};
usb2phy3_grf: syscon@fd5dc000 {
compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
reg = <0x0 0xfd5dc000 0x0 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
u2phy3: usb2-phy@c000 {
compatible = "rockchip,rk3588-usb2phy";
reg = <0xc000 0x10>;
interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
reset-names = "phy", "apb";
clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
clock-names = "phyclk";
clock-output-names = "usb480m_phy3";
#clock-cells = <0>;
status = "disabled";
u2phy3_host: host-port {
#phy-cells = <0>;
status = "disabled";
};
};
};
ioc: syscon@fd5f0000 {
compatible = "rockchip,rk3588-ioc", "syscon";
reg = <0x0 0xfd5f0000 0x0 0x10000>;
......@@ -1121,6 +1227,108 @@ qos_vop_m1: qos@fdf82200 {
reg = <0x0 0xfdf82200 0x0 0x20>;
};
pcie2x1l1: pcie@fe180000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
bus-range = <0x30 0x3f>;
clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>,
<&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>,
<&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>,
<0 0 0 2 &pcie2x1l1_intc 1>,
<0 0 0 3 &pcie2x1l1_intc 2>,
<0 0 0 4 &pcie2x1l1_intc 3>;
linux,pci-domain = <3>;
max-link-speed = <2>;
msi-map = <0x3000 &its0 0x3000 0x1000>;
num-lanes = <1>;
phys = <&combphy2_psu PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>,
<0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>;
reg = <0xa 0x40c00000 0x0 0x00400000>,
<0x0 0xfe180000 0x0 0x00010000>,
<0x0 0xf3000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>;
reset-names = "pwr", "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie2x1l1_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>;
};
};
pcie2x1l2: pcie@fe190000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
bus-range = <0x40 0x4f>;
clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>,
<&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>,
<&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>,
<0 0 0 2 &pcie2x1l2_intc 1>,
<0 0 0 3 &pcie2x1l2_intc 2>,
<0 0 0 4 &pcie2x1l2_intc 3>;
linux,pci-domain = <4>;
max-link-speed = <2>;
msi-map = <0x4000 &its0 0x4000 0x1000>;
num-lanes = <1>;
phys = <&combphy0_ps PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
<0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>;
reg = <0xa 0x41000000 0x0 0x00400000>,
<0x0 0xfe190000 0x0 0x00010000>,
<0x0 0xf4000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>;
reset-names = "pwr", "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie2x1l2_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>;
};
};
gmac1: ethernet@fe1c0000 {
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
reg = <0x0 0xfe1c0000 0x0 0x10000>;
......@@ -1170,6 +1378,52 @@ gmac1_mtl_tx_setup: tx-queues-config {
};
};
sata0: sata@fe210000 {
compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
reg = <0 0xfe210000 0 0x1000>;
interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
<&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
<&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
ports-implemented = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata-port@0 {
reg = <0>;
hba-port-cap = <HBA_PORT_FBSCP>;
phys = <&combphy0_ps PHY_TYPE_SATA>;
phy-names = "sata-phy";
snps,rx-ts-max = <32>;
snps,tx-ts-max = <32>;
};
};
sata2: sata@fe230000 {
compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
reg = <0 0xfe230000 0 0x1000>;
interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>,
<&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>,
<&cru CLK_PIPEPHY2_PIPE_ASIC_G>;
clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
ports-implemented = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata-port@0 {
reg = <0>;
hba-port-cap = <HBA_PORT_FBSCP>;
phys = <&combphy2_psu PHY_TYPE_SATA>;
phy-names = "sata-phy";
snps,rx-ts-max = <32>;
snps,tx-ts-max = <32>;
};
};
sdmmc: mmc@fe2c0000 {
compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe2c0000 0x0 0x4000>;
......@@ -1943,6 +2197,38 @@ dmac2: dma-controller@fed10000 {
#dma-cells = <1>;
};
combphy0_ps: phy@fee00000 {
compatible = "rockchip,rk3588-naneng-combphy";
reg = <0x0 0xfee00000 0x0 0x100>;
clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>,
<&cru PCLK_PHP_ROOT>;
clock-names = "ref", "apb", "pipe";
assigned-clocks = <&cru CLK_REF_PIPE_PHY0>;
assigned-clock-rates = <100000000>;
#phy-cells = <1>;
resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>;
reset-names = "phy", "apb";
rockchip,pipe-grf = <&php_grf>;
rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
status = "disabled";
};
combphy2_psu: phy@fee20000 {
compatible = "rockchip,rk3588-naneng-combphy";
reg = <0x0 0xfee20000 0x0 0x100>;
clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>,
<&cru PCLK_PHP_ROOT>;
clock-names = "ref", "apb", "pipe";
assigned-clocks = <&cru CLK_REF_PIPE_PHY2>;
assigned-clock-rates = <100000000>;
#phy-cells = <1>;
resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>;
reset-names = "phy", "apb";
rockchip,pipe-grf = <&php_grf>;
rockchip,pipe-phy-grf = <&pipe_phy2_grf>;
status = "disabled";
};
system_sram2: sram@ff001000 {
compatible = "mmio-sram";
reg = <0x0 0xff001000 0x0 0xef000>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7