Commit b8cd337c authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Gregory CLEMENT

ARM: orion: always use MULTI_IRQ_HANDLER

As a preparation for multiplatform support, this enables
the MULTI_IRQ_HANDLER code unconditionally on dove and
orion5x, and introduces the respective code on mv78xx0,
which did not have it so far. The classic entry-macro.S
files are removed as they are now obsolete.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent 06f3008a
......@@ -510,6 +510,7 @@ config ARCH_DOVE
select CPU_PJ4
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select MULTI_IRQ_HANDLER
select MVEBU_MBUS
select PINCTRL
select PINCTRL_DOVE
......@@ -523,6 +524,7 @@ config ARCH_MV78XX0
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
select MULTI_IRQ_HANDLER
select PCI
select PLAT_ORION_LEGACY
help
......@@ -536,6 +538,7 @@ config ARCH_ORION5X
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
select MULTI_IRQ_HANDLER
select PCI
select PLAT_ORION_LEGACY
select MULTI_IRQ_HANDLER
......
/*
* arch/arm/mach-dove/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Marvell Dove platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/bridge-regs.h>
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #31
ands \irqstat, \irqstat, \tmp
@ if no low interrupts set, check high interrupts
ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
moveq \irqnr, #63
andeqs \irqstat, \irqstat, \tmp
@ find first active interrupt source
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
......@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/exception.h>
#include <asm/mach/arch.h>
#include <plat/irq.h>
#include <asm/mach/irq.h>
......@@ -109,14 +110,6 @@ static int __initdata gpio2_irqs[4] = {
0,
};
#ifdef CONFIG_MULTI_IRQ_HANDLER
/*
* Compiling with both non-DT and DT support enabled, will
* break asm irq handler used by non-DT boards. Therefore,
* we provide a C-style irq handler even for non-DT boards,
* if MULTI_IRQ_HANDLER is set.
*/
static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
static asmlinkage void
......@@ -139,7 +132,6 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
return;
}
}
#endif
void __init dove_init_irq(void)
{
......@@ -148,9 +140,7 @@ void __init dove_init_irq(void)
orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(dove_legacy_handle_irq);
#endif
/*
* Initialize gpiolib for GPIOs 0-71.
......
/*
* arch/arm/mach-mv78xx0/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Marvell MV78xx0 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/bridge-regs.h>
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #31
ands \irqstat, \irqstat, \tmp
bne 1001f
@ if no low interrupts set, check high interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
mov \irqnr, #63
ands \irqstat, \irqstat, \tmp
bne 1001f
@ if no high interrupts set, check error interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
ldr \tmp, [\base, #IRQ_MASK_ERR_OFF]
mov \irqnr, #95
ands \irqstat, \irqstat, \tmp
@ find first active interrupt source
1001: clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
......@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/exception.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
......@@ -23,12 +24,44 @@ static int __initdata gpio0_irqs[4] = {
IRQ_MV78XX0_GPIO_24_31,
};
static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE;
static asmlinkage void
__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs)
{
u32 stat;
stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF);
stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF);
if (stat) {
unsigned int hwirq = __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF);
stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF);
if (stat) {
unsigned int hwirq = 32 + __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF);
stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF);
if (stat) {
unsigned int hwirq = 64 + __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
}
void __init mv78xx0_init_irq(void)
{
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
set_handle_irq(mv78xx0_legacy_handle_irq);
/*
* Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask
* registers for core #1 are at an offset of 0x18 from those of
......
/*
* arch/arm/mach-orion5x/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Orion platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/bridge-regs.h>
.macro get_irqnr_preamble, base, tmp
ldr \base, =MAIN_IRQ_CAUSE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #0] @ main cause
ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
mov \irqnr, #0 @ default irqnr
@ find cause bits that are unmasked
ands \irqstat, \irqstat, \tmp @ clear Z flag if any
clzne \irqnr, \irqstat @ calc irqnr
rsbne \irqnr, \irqnr, #31
.endm
......@@ -26,14 +26,6 @@ static int __initdata gpio0_irqs[4] = {
IRQ_ORION5X_GPIO_24_31,
};
#ifdef CONFIG_MULTI_IRQ_HANDLER
/*
* Compiling with both non-DT and DT support enabled, will
* break asm irq handler used by non-DT boards. Therefore,
* we provide a C-style irq handler even for non-DT boards,
* if MULTI_IRQ_HANDLER is set.
*/
asmlinkage void
__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
{
......@@ -47,15 +39,12 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
return;
}
}
#endif
void __init orion5x_init_irq(void)
{
orion_irq_init(1, MAIN_IRQ_MASK);
#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(orion5x_legacy_handle_irq);
#endif
/*
* Initialize gpiolib for GPIOs 0-31.
......
......@@ -18,7 +18,6 @@
#include <asm/exception.h>
#include <plat/irq.h>
#include <plat/orion-gpio.h>
#include <mach/bridge-regs.h>
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
......
......@@ -13,7 +13,6 @@
#include <linux/mbus.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <plat/orion-gpio.h>
#include <plat/mpp.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment