Commit b8db6b88 authored by Gregory CLEMENT's avatar Gregory CLEMENT Committed by Russell King

ARM: 7547/4: cache-l2x0: add support for Aurora L2 cache ctrl

Aurora Cache Controller was designed to be compatible with the ARM L2
Cache Controller. It comes with some difference or improvement such
as:
- no cache id part number available through hardware (need to get it
  by the DT).
- always write through mode available.
- two flavors of the controller outer cache and system cache (meaning
  maintenance operations on L1 are broadcasted to the L2 and L2
  performs the same operation).
- in outer cache mode, the cache maintenance operations are improved and
  can be done on a range inside a page and are not limited to a cache
  line.
Tested-and-Reviewed-by: default avatarLior Amsalem <alior@marvell.com>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarYehuda Yitschak <yehuday@marvell.com>
Reviewed-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent c3545236
......@@ -102,6 +102,10 @@
#define L2X0_ADDR_FILTER_EN 1
#define L2X0_CTRL_EN 1
#define L2X0_WAY_SIZE_SHIFT 3
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask);
#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
......
/*
* AURORA shared L2 cache controller support
*
* Copyright (C) 2012 Marvell
*
* Yehuda Yitschak <yehuday@marvell.com>
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARM_HARDWARE_AURORA_L2_H
#define __ASM_ARM_HARDWARE_AURORA_L2_H
#define AURORA_SYNC_REG 0x700
#define AURORA_RANGE_BASE_ADDR_REG 0x720
#define AURORA_FLUSH_PHY_ADDR_REG 0x7f0
#define AURORA_INVAL_RANGE_REG 0x774
#define AURORA_CLEAN_RANGE_REG 0x7b4
#define AURORA_FLUSH_RANGE_REG 0x7f4
#define AURORA_ACR_REPLACEMENT_OFFSET 27
#define AURORA_ACR_REPLACEMENT_MASK \
(0x3 << AURORA_ACR_REPLACEMENT_OFFSET)
#define AURORA_ACR_REPLACEMENT_TYPE_WAYRR \
(0 << AURORA_ACR_REPLACEMENT_OFFSET)
#define AURORA_ACR_REPLACEMENT_TYPE_LFSR \
(1 << AURORA_ACR_REPLACEMENT_OFFSET)
#define AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU \
(3 << AURORA_ACR_REPLACEMENT_OFFSET)
#define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET 0
#define AURORA_ACR_FORCE_WRITE_POLICY_MASK \
(0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
#define AURORA_ACR_FORCE_WRITE_POLICY_DIS \
(0 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
#define AURORA_ACR_FORCE_WRITE_BACK_POLICY \
(1 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
#define AURORA_ACR_FORCE_WRITE_THRO_POLICY \
(2 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
#define MAX_RANGE_SIZE 1024
#define AURORA_WAY_SIZE_SHIFT 2
#define AURORA_CTRL_FW 0x100
/* chose a number outside L2X0_CACHE_ID_PART_MASK to be sure to make
* the distinction between a number coming from hardware and a number
* coming from the device tree */
#define AURORA_CACHE_ID 0x100
#endif /* __ASM_ARM_HARDWARE_AURORA_L2_H */
......@@ -25,6 +25,7 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include "cache-aurora-l2.h"
#define CACHE_LINE_SIZE 32
......@@ -34,6 +35,10 @@ static u32 l2x0_way_mask; /* Bitmask of active ways */
static u32 l2x0_size;
static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
/* Aurora don't have the cache ID register available, so we have to
* pass it though the device tree */
static u32 cache_id_part_number_from_dt;
struct l2x0_regs l2x0_saved_regs;
struct l2x0_of_data {
......@@ -170,7 +175,7 @@ static void l2x0_inv_all(void)
/* invalidate all ways */
raw_spin_lock_irqsave(&l2x0_lock, flags);
/* Invalidating when L2 is enabled is a nono */
BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1);
BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN);
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
cache_sync();
......@@ -294,11 +299,18 @@ static void l2x0_unlock(u32 cache_id)
int lockregs;
int i;
if (cache_id == L2X0_CACHE_ID_PART_L310)
switch (cache_id) {
case L2X0_CACHE_ID_PART_L310:
lockregs = 8;
else
break;
case AURORA_CACHE_ID:
lockregs = 4;
break;
default:
/* L210 and unknown types */
lockregs = 1;
break;
}
for (i = 0; i < lockregs; i++) {
writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
......@@ -314,18 +326,22 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
u32 cache_id;
u32 way_size = 0;
int ways;
int way_size_shift = L2X0_WAY_SIZE_SHIFT;
const char *type;
l2x0_base = base;
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
if (cache_id_part_number_from_dt)
cache_id = cache_id_part_number_from_dt;
else
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
& L2X0_CACHE_ID_PART_MASK;
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
aux &= aux_mask;
aux |= aux_val;
/* Determine the number of ways */
switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
switch (cache_id) {
case L2X0_CACHE_ID_PART_L310:
if (aux & (1 << 16))
ways = 16;
......@@ -342,6 +358,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
ways = (aux >> 13) & 0xf;
type = "L210";
break;
case AURORA_CACHE_ID:
sync_reg_offset = AURORA_SYNC_REG;
ways = (aux >> 13) & 0xf;
ways = 2 << ((ways + 1) >> 2);
way_size_shift = AURORA_WAY_SIZE_SHIFT;
type = "Aurora";
break;
default:
/* Assume unknown chips have 8 ways */
ways = 8;
......@@ -355,7 +379,8 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
* L2 cache Size = Way size * Number of ways
*/
way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
way_size = 1 << (way_size + 3);
way_size = 1 << (way_size + way_size_shift);
l2x0_size = ways * way_size * SZ_1K;
/*
......@@ -363,7 +388,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
* If you are booting from non-secure mode
* accessing the below registers will fault.
*/
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
/* Make sure that I&D is not locked down when starting */
l2x0_unlock(cache_id);
......@@ -373,7 +398,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
l2x0_inv_all();
/* enable L2X0 */
writel_relaxed(1, l2x0_base + L2X0_CTRL);
writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
}
/* Re-read it in case some bits are reserved. */
......@@ -398,6 +423,100 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
}
#ifdef CONFIG_OF
static int l2_wt_override;
/*
* Note that the end addresses passed to Linux primitives are
* noninclusive, while the hardware cache range operations use
* inclusive start and end addresses.
*/
static unsigned long calc_range_end(unsigned long start, unsigned long end)
{
/*
* Limit the number of cache lines processed at once,
* since cache range operations stall the CPU pipeline
* until completion.
*/
if (end > start + MAX_RANGE_SIZE)
end = start + MAX_RANGE_SIZE;
/*
* Cache range operations can't straddle a page boundary.
*/
if (end > PAGE_ALIGN(start+1))
end = PAGE_ALIGN(start+1);
return end;
}
/*
* Make sure 'start' and 'end' reference the same page, as L2 is PIPT
* and range operations only do a TLB lookup on the start address.
*/
static void aurora_pa_range(unsigned long start, unsigned long end,
unsigned long offset)
{
unsigned long flags;
raw_spin_lock_irqsave(&l2x0_lock, flags);
writel(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG);
writel(end, l2x0_base + offset);
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
cache_sync();
}
static void aurora_inv_range(unsigned long start, unsigned long end)
{
/*
* round start and end adresses up to cache line size
*/
start &= ~(CACHE_LINE_SIZE - 1);
end = ALIGN(end, CACHE_LINE_SIZE);
/*
* Invalidate all full cache lines between 'start' and 'end'.
*/
while (start < end) {
unsigned long range_end = calc_range_end(start, end);
aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
AURORA_INVAL_RANGE_REG);
start = range_end;
}
}
static void aurora_clean_range(unsigned long start, unsigned long end)
{
/*
* If L2 is forced to WT, the L2 will always be clean and we
* don't need to do anything here.
*/
if (!l2_wt_override) {
start &= ~(CACHE_LINE_SIZE - 1);
end = ALIGN(end, CACHE_LINE_SIZE);
while (start != end) {
unsigned long range_end = calc_range_end(start, end);
aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
AURORA_CLEAN_RANGE_REG);
start = range_end;
}
}
}
static void aurora_flush_range(unsigned long start, unsigned long end)
{
if (!l2_wt_override) {
start &= ~(CACHE_LINE_SIZE - 1);
end = ALIGN(end, CACHE_LINE_SIZE);
while (start != end) {
unsigned long range_end = calc_range_end(start, end);
aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
AURORA_FLUSH_RANGE_REG);
start = range_end;
}
}
}
static void __init l2x0_of_setup(const struct device_node *np,
u32 *aux_val, u32 *aux_mask)
{
......@@ -495,9 +614,15 @@ static void __init pl310_save(void)
}
}
static void aurora_save(void)
{
l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL);
l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
}
static void l2x0_resume(void)
{
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
/* restore aux ctrl and enable l2 */
l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
......@@ -506,7 +631,7 @@ static void l2x0_resume(void)
l2x0_inv_all();
writel_relaxed(1, l2x0_base + L2X0_CTRL);
writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
}
}
......@@ -514,7 +639,7 @@ static void pl310_resume(void)
{
u32 l2x0_revision;
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
/* restore pl310 setup */
writel_relaxed(l2x0_saved_regs.tag_latency,
l2x0_base + L2X0_TAG_LATENCY_CTRL);
......@@ -540,6 +665,46 @@ static void pl310_resume(void)
l2x0_resume();
}
static void aurora_resume(void)
{
if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
writel(l2x0_saved_regs.aux_ctrl, l2x0_base + L2X0_AUX_CTRL);
writel(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL);
}
}
static void __init aurora_broadcast_l2_commands(void)
{
__u32 u;
/* Enable Broadcasting of cache commands to L2*/
__asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u));
u |= AURORA_CTRL_FW; /* Set the FW bit */
__asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u));
isb();
}
static void __init aurora_of_setup(const struct device_node *np,
u32 *aux_val, u32 *aux_mask)
{
u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
u32 mask = AURORA_ACR_REPLACEMENT_MASK;
of_property_read_u32(np, "cache-id-part",
&cache_id_part_number_from_dt);
/* Determine and save the write policy */
l2_wt_override = of_property_read_bool(np, "wt-override");
if (l2_wt_override) {
val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
}
*aux_val &= ~mask;
*aux_val |= val;
*aux_mask &= ~mask;
}
static const struct l2x0_of_data pl310_data = {
.setup = pl310_of_setup,
.save = pl310_save,
......@@ -571,10 +736,37 @@ static const struct l2x0_of_data l2x0_data = {
},
};
static const struct l2x0_of_data aurora_with_outer_data = {
.setup = aurora_of_setup,
.save = aurora_save,
.outer_cache = {
.resume = aurora_resume,
.inv_range = aurora_inv_range,
.clean_range = aurora_clean_range,
.flush_range = aurora_flush_range,
.sync = l2x0_cache_sync,
.flush_all = l2x0_flush_all,
.inv_all = l2x0_inv_all,
.disable = l2x0_disable,
},
};
static const struct l2x0_of_data aurora_no_outer_data = {
.setup = aurora_of_setup,
.save = aurora_save,
.outer_cache = {
.resume = aurora_resume,
},
};
static const struct of_device_id l2x0_ids[] __initconst = {
{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
{ .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
{ .compatible = "marvell,aurora-system-cache",
.data = (void *)&aurora_no_outer_data},
{ .compatible = "marvell,aurora-outer-cache",
.data = (void *)&aurora_with_outer_data},
{}
};
......@@ -600,9 +792,14 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
data = of_match_node(l2x0_ids, np)->data;
/* L2 configuration can only be changed if the cache is disabled */
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
if (data->setup)
data->setup(np, &aux_val, &aux_mask);
/* For aurora cache in no outer mode select the
* correct mode using the coprocessor*/
if (data == &aurora_no_outer_data)
aurora_broadcast_l2_commands();
}
if (data->save)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment