media: i2c: Use pm_runtime_resume_and_get()

Simplify error handling by using pm_runtime_resume_and_get() instead of
pm_runtime_get_sync() with a put call in the error path.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> (st-vgxy61)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

drivers/media/i2c/ccs/ccs-core.c

@@ -1893,9 +1893,9 @@ static int ccs_pm_get_init(struct ccs_sensor *sensor)
 	 * relies at the returned value to detect if the device was already
 	 * active or not.
 	 */
-	rval = pm_runtime_get_sync(&client->dev);
-	if (rval < 0)
-		goto error;
+	rval = pm_runtime_resume_and_get(&client->dev);
+	if (rval)
+		return rval;
 
 	/* Device was already active, so don't set controls */
 	if (rval == 1)

drivers/media/i2c/hi846.c

@@ -1613,11 +1613,9 @@ static int hi846_set_stream(struct v4l2_subdev *sd, int enable)
 	mutex_lock(&hi846->mutex);
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret)
 			goto out;
-		}
 
 		ret = hi846_start_streaming(hi846);
 	}

drivers/media/i2c/hi847.c

@@ -2623,9 +2623,8 @@ static int hi847_set_stream(struct v4l2_subdev *sd, int enable)
 
 	mutex_lock(&hi847->mutex);
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret) {
 			mutex_unlock(&hi847->mutex);
 			return ret;
 		}

drivers/media/i2c/imx208.c

@@ -720,9 +720,11 @@ static int imx208_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0)
-			goto err_rpm_put;
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret) {
+			mutex_unlock(&imx208->imx208_mx);
+			return ret;
+		}
 
 		/*
 		 * Apply default & customized values
@@ -819,11 +821,9 @@ static int imx208_read_otp(struct imx208 *imx208)
 	if (imx208->otp_read)
 		goto out_unlock;
 
-	ret = pm_runtime_get_sync(&client->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(&client->dev);
+	ret = pm_runtime_resume_and_get(&client->dev);
+	if (ret)
 		goto out_unlock;
-	}
 
 	ret = imx208_identify_module(imx208);
 	if (ret)

drivers/media/i2c/og01a1b.c

@@ -737,9 +737,8 @@ static int og01a1b_set_stream(struct v4l2_subdev *sd, int enable)
 
 	mutex_lock(&og01a1b->mutex);
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret) {
 			mutex_unlock(&og01a1b->mutex);
 			return ret;
 		}

drivers/media/i2c/ov5693.c

@@ -975,9 +975,9 @@ static int ov5693_s_stream(struct v4l2_subdev *sd, int enable)
 	int ret;
 
 	if (enable) {
-		ret = pm_runtime_get_sync(ov5693->dev);
-		if (ret < 0)
-			goto err_power_down;
+		ret = pm_runtime_resume_and_get(ov5693->dev);
+		if (ret)
+			return ret;
 
 		mutex_lock(&ov5693->lock);
 		ret = __v4l2_ctrl_handler_setup(&ov5693->ctrls.handler);

drivers/media/i2c/ov7251.c

@@ -1340,9 +1340,11 @@ static int ov7251_s_stream(struct v4l2_subdev *subdev, int enable)
 	mutex_lock(&ov7251->lock);
 
 	if (enable) {
-		ret = pm_runtime_get_sync(ov7251->dev);
-		if (ret < 0)
-			goto err_power_down;
+		ret = pm_runtime_resume_and_get(ov7251->dev);
+		if (ret) {
+			mutex_unlock(&ov7251->lock);
+			return ret;
+		}
 
 		ret = ov7251_pll_configure(ov7251);
 		if (ret) {

drivers/media/i2c/st-vgxy61.c

@@ -1170,14 +1170,9 @@ static int vgxy61_stream_enable(struct vgxy61_dev *sensor)
 	if (ret)
 		return ret;
 
-	ret = pm_runtime_get_sync(&client->dev);
-	if (ret < 0) {
-		pm_runtime_put_autosuspend(&client->dev);
+	ret = pm_runtime_resume_and_get(&client->dev);
+	if (ret)
 		return ret;
-	}
-
-	/* pm_runtime_get_sync() can return 1 as a valid return code */
-	ret = 0;
 
 	vgxy61_write_reg(sensor, VGXY61_REG_FORMAT_CTRL,
 			 get_bpp_by_code(sensor->fmt.code), &ret);