Commit b99db36c authored by Paul Walmsley's avatar Paul Walmsley

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

arch/arm/mach-omap2/prcm.c and arch/arm/plat-omap/include/plat/prcm.h
are now completely unused and can be removed.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Tested-by: default avatarVaibhav Hiremath <hvaibhav@ti.com>
parent 2577a4a6
......@@ -4,8 +4,6 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include <plat/prcm.h>
#include <mach/hardware.h>
#include "iomap.h"
......
......@@ -99,7 +99,7 @@ obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
endif
# PRCM
obj-y += prcm.o prm_common.o cm_common.o
obj-y += prm_common.o cm_common.o
obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
......
......@@ -21,7 +21,6 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/prcm.h>
#include "clock.h"
#include "clock2xxx.h"
......
......@@ -14,7 +14,6 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/prcm.h>
#include "clock.h"
#include "clock2xxx.h"
......
......@@ -26,7 +26,6 @@
#include <asm/cpu.h>
#include <plat/prcm.h>
#include <trace/events/power.h>
......
......@@ -27,7 +27,6 @@
#include <linux/export.h>
#include <linux/cpu_pm.h>
#include <plat/prcm.h>
#include "powerdomain.h"
#include "clockdomain.h"
......
......@@ -28,7 +28,6 @@
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
#include <plat/prcm.h>
#include "omap_hwmod.h"
#include "soc.h"
......
......@@ -141,7 +141,6 @@
#include "clock.h"
#include "omap_hwmod.h"
#include <plat/prcm.h>
#include "soc.h"
#include "common.h"
......
......@@ -37,7 +37,6 @@
#include "clockdomain.h"
#include "powerdomain.h"
#include <plat/prcm.h>
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
......
......@@ -29,8 +29,6 @@
#include <asm/cpu.h>
#include <plat/prcm.h>
#include "powerdomain.h"
#include "clockdomain.h"
......
/*
* linux/arch/arm/mach-omap2/prcm.c
*
* OMAP 24xx Power Reset and Clock Management (PRCM) functions
*
* Copyright (C) 2005 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
*
* Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
* Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/export.h>
#include "common.h"
#include <plat/prcm.h>
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prminst44xx.h"
#include "cminst44xx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
/*
* Stubbed functions so that common files continue to build when
* custom builds are used
* XXX These are temporary and should be removed at the earliest possible
* opportunity
*/
int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
return 0;
}
void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
s16 cdoffs, u16 clkctrl_offs)
{
}
void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
}
......@@ -20,7 +20,6 @@
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include "vp.h"
#include "powerdomain.h"
......
......@@ -20,7 +20,6 @@
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include "vp.h"
#include "powerdomain.h"
......
......@@ -18,7 +18,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <plat/prcm.h>
#include "soc.h"
#include "iomap.h"
......
......@@ -25,7 +25,6 @@
#include <linux/slab.h>
#include "../plat-omap/common.h"
#include <plat/prcm.h>
#include "prm2xxx_3xxx.h"
#include "prm2xxx.h"
......
/*
* arch/arm/plat-omap/include/mach/prcm.h
*
* Access definations for use in OMAP24XX clock and power management
*
* Copyright (C) 2005 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* XXX This file is deprecated. The PRCM is an OMAP2+-only subsystem,
* so this file doesn't belong in plat-omap/include/plat. Please
* do not add anything new to this file.
*/
#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
#define __ASM_ARM_ARCH_OMAP_PRCM_H
/* XXX To be removed */
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment