Input: move USB miscellaneous devices under drivers/input/misc

This will allow concentrating all input devices in one place
in {menu|x|q}config.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/input/misc/Kconfig

@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
 	tristate "M68k Beeper support"
 	depends on M68K
 
+config INPUT_IXP4XX_BEEPER
+	tristate "IXP4XX Beeper support"
+	depends on ARCH_IXP4XX
+	help
+	  If you say yes here, you can connect a beeper to the
+	  ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ixp4xx-beeper.
+
 config INPUT_COBALT_BTNS
 	tristate "Cobalt button interface"
 	depends on MIPS_COBALT
@@ -70,17 +82,79 @@ config INPUT_ATLAS_BTNS
 	  To compile this driver as a module, choose M here: the module will
 	  be called atlas_btns.
 
-config INPUT_IXP4XX_BEEPER
-	tristate "IXP4XX Beeper support"
-	depends on ARCH_IXP4XX
+config INPUT_ATI_REMOTE
+	tristate "ATI / X10 USB RF remote control"
+	select USB
 	help
-	  If you say yes here, you can connect a beeper to the
-	  ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+	  Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+	  These are RF remotes with USB receivers.
+	  The ATI remote comes with many of ATI's All-In-Wonder video cards.
+	  The X10 "Lola" remote is available at:
+	     <http://www.x10.com/products/lola_sg1.htm>
+	  This driver provides mouse pointer, left and right mouse buttons,
+	  and maps all the other remote buttons to keypress events.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ati_remote.
+
+config INPUT_ATI_REMOTE2
+	tristate "ATI / Philips USB RF remote control"
+	select USB
+	help
+	  Say Y here if you want to use an ATI or Philips USB RF remote control.
+	  These are RF remotes with USB receivers.
+	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+	  and is also available as a separate product.
+	  This driver provides mouse pointer, left and right mouse buttons,
+	  and maps all the other remote buttons to keypress events.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ati_remote2.
+
+config INPUT_KEYSPAN_REMOTE
+	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select USB
+	help
+	  Say Y here if you want to use a Keyspan DMR USB remote control.
+	  Currently only the UIA-11 type of receiver has been tested.  The tag
+	  on the receiver that connects to the USB port should have a P/N that
+	  will tell you what type of DMR you have.  The UIA-10 type is not
+	  supported at this time.  This driver maps all buttons to keypress
+	  events.
 
-	  If unsure, say Y.
+	  To compile this driver as a module, choose M here: the module will
+	  be called keyspan_remote.
+
+config INPUT_POWERMATE
+	tristate "Griffin PowerMate and Contour Jog support"
+	select USB
+	help
+	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
+	  These are aluminum dials which can measure clockwise and anticlockwise
+	  rotation.  The dial also acts as a pushbutton.  The base contains an LED
+	  which can be instructed to pulse or to switch to a particular intensity.
+
+	  You can download userspace tools from
+	  <http://sowerbutts.com/powermate/>.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ixp4xx-beeper.
+	  module will be called powermate.
+
+config INPUT_YEALINK
+	tristate "Yealink usb-p1k voip phone"
+	depends EXPERIMENTAL
+	select USB
+	help
+	  Say Y here if you want to enable keyboard and LCD functions of the
+	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
+	  usb sound driver, so you might want to enable that as well.
+
+	  For information about how to use these additional functions, see
+	  <file:Documentation/input/yealink.txt>.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called yealink.
 
 config INPUT_UINPUT
 	tristate "User level driver support"

drivers/input/misc/Makefile

@@ -8,9 +8,14 @@ obj-$(CONFIG_INPUT_POLLDEV)		+= input-polldev.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
-obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
+obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
+obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
+obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
+obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
+obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
-obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
+obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o

drivers/usb/input/yealink.c → drivers/input/misc/yealink.c

@@ -29,7 +29,7 @@
  * This driver is based on:
  *   - the usbb2k-api	http://savannah.nongnu.org/projects/usbb2k-api/
  *   - information from	http://memeteau.free.fr/usbb2k
- *   - the xpad-driver	drivers/usb/input/xpad.c
+ *   - the xpad-driver	drivers/input/joystick/xpad.c
  *
  * Thanks to:
  *   - Olivier Vandorpe, for providing the usbb2k-api.

drivers/usb/Kconfig

@@ -85,8 +85,6 @@ source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
 
-source "drivers/usb/input/Kconfig"
-
 source "drivers/usb/image/Kconfig"
 
 source "drivers/usb/net/Kconfig"

drivers/usb/Makefile

@@ -23,9 +23,6 @@ obj-$(CONFIG_USB_PRINTER)	+= class/
 obj-$(CONFIG_USB_STORAGE)	+= storage/
 obj-$(CONFIG_USB)		+= storage/
 
-obj-$(CONFIG_USB_ATI_REMOTE)	+= input/
-obj-$(CONFIG_USB_POWERMATE)	+= input/
-
 obj-$(CONFIG_USB_CATC)		+= net/
 obj-$(CONFIG_USB_KAWETH)	+= net/
 obj-$(CONFIG_USB_PEGASUS)	+= net/

drivers/usb/input/Kconfig

-#
-# USB Input driver configuration
-#
-comment "USB Input Devices"
-	depends on USB
-
-config USB_POWERMATE
-	tristate "Griffin PowerMate and Contour Jog support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
-	  These are aluminum dials which can measure clockwise and anticlockwise
-	  rotation.  The dial also acts as a pushbutton.  The base contains an LED
-	  which can be instructed to pulse or to switch to a particular intensity.
-
-	  You can download userspace tools from
-	  <http://sowerbutts.com/powermate/>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called powermate.
-
-config USB_YEALINK
-	tristate "Yealink usb-p1k voip phone"
-	depends on USB && INPUT && EXPERIMENTAL
-	---help---
-	  Say Y here if you want to enable keyboard and LCD functions of the
-	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
-	  usb sound driver, so you might want to enable that as well.
-
-	  For information about how to use these additional functions, see
-	  <file:Documentation/input/yealink.txt>.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called yealink.
-
-config USB_ATI_REMOTE
-	tristate "ATI / X10 USB RF remote control"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
-	  These are RF remotes with USB receivers. 
-	  The ATI remote comes with many of ATI's All-In-Wonder video cards.
-	  The X10 "Lola" remote is available at:
-	     <http://www.x10.com/products/lola_sg1.htm>
-	  This driver provides mouse pointer, left and right mouse buttons, 
-	  and maps all the other remote buttons to keypress events.
-	  
-	  To compile this driver as a module, choose M here: the module will be
-	  called ati_remote.
-
-config USB_ATI_REMOTE2
-	tristate "ATI / Philips USB RF remote control"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use an ATI or Philips USB RF remote control.
-	  These are RF remotes with USB receivers.
-	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
-	  and is also available as a separate product.
-	  This driver provides mouse pointer, left and right mouse buttons,
-	  and maps all the other remote buttons to keypress events.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ati_remote2.
-
-config USB_KEYSPAN_REMOTE
-	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
-	depends on USB && INPUT && EXPERIMENTAL
-	---help---
-	  Say Y here if you want to use a Keyspan DMR USB remote control.
-	  Currently only the UIA-11 type of receiver has been tested.  The tag
-	  on the receiver that connects to the USB port should have a P/N that
-	  will tell you what type of DMR you have.  The UIA-10 type is not
-	  supported at this time.  This driver maps all buttons to keypress
-	  events.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called keyspan_remote.

drivers/usb/input/Makefile

-#
-# Makefile for the USB input drivers
-#
-
-obj-$(CONFIG_USB_ATI_REMOTE)	+= ati_remote.o
-obj-$(CONFIG_USB_ATI_REMOTE2)	+= ati_remote2.o
-obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o
-obj-$(CONFIG_USB_POWERMATE)	+= powermate.o
-obj-$(CONFIG_USB_YEALINK)	+= yealink.o
-
-ifeq ($(CONFIG_USB_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif