Merge remote-tracking branch 'pinctrl/samsung' into next/pinctrl-samsung

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt

@@ -13,8 +13,14 @@ Required Properties:
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
 
-- interrupts: interrupt specifier for the controller. The format and value of
-  the interrupt specifier depends on the interrupt parent for the controller.
+- Pin banks as child nodes: Pin banks of the controller are represented by child
+  nodes of the controller node. Bank name is taken from name of the node. Each
+  bank node must contain following properties:
+
+  - gpio-controller: identifies the node as a gpio controller and pin bank.
+  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+    binding is used, the amount of cells must be specified as 2. See generic
+    GPIO binding documentation for description of particular cells.
 
 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
   mode) and pin config (pull up/down, driver strength) settings are represented
@@ -72,16 +78,24 @@ used as system wakeup events.
 A. External GPIO Interrupts: For supporting external gpio interrupts, the
    following properties should be specified in the pin-controller device node.
 
-- interrupt-controller: identifies the controller node as interrupt-parent.
-- #interrupt-cells: the value of this property should be 2.
-  - First Cell: represents the external gpio interrupt number local to the
-    external gpio interrupt space of the controller.
-  - Second Cell: flags to identify the type of the interrupt
-    - 1 = rising edge triggered
-    - 2 = falling edge triggered
-    - 3 = rising and falling edge triggered
-    - 4 = high level triggered
-    - 8 = low level triggered
+   - interrupt-parent: phandle of the interrupt parent to which the external
+     GPIO interrupts are forwarded to.
+   - interrupts: interrupt specifier for the controller. The format and value of
+     the interrupt specifier depends on the interrupt parent for the controller.
+
+   In addition, following properties must be present in node of every bank
+   of pins supporting GPIO interrupts:
+
+   - interrupt-controller: identifies the controller node as interrupt-parent.
+   - #interrupt-cells: the value of this property should be 2.
+     - First Cell: represents the external gpio interrupt number local to the
+       external gpio interrupt space of the controller.
+     - Second Cell: flags to identify the type of the interrupt
+       - 1 = rising edge triggered
+       - 2 = falling edge triggered
+       - 3 = rising and falling edge triggered
+       - 4 = high level triggered
+       - 8 = low level triggered
 
 B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
    child node representing the external wakeup interrupt controller should be
@@ -94,6 +108,11 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        found on Samsung Exynos4210 SoC.
    - interrupt-parent: phandle of the interrupt parent to which the external
      wakeup interrupts are forwarded to.
+   - interrupts: interrupt used by multiplexed wakeup interrupts.
+
+   In addition, following properties must be present in node of every bank
+   of pins supporting wake-up interrupts:
+
    - interrupt-controller: identifies the node as interrupt-parent.
    - #interrupt-cells: the value of this property should be 2
      - First Cell: represents the external wakeup interrupt number local to
@@ -105,11 +124,63 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        - 4 = high level triggered
        - 8 = low level triggered
 
+   Node of every bank of pins supporting direct wake-up interrupts (without
+   multiplexing) must contain following properties:
+
+   - interrupt-parent: phandle of the interrupt parent to which the external
+     wakeup interrupts are forwarded to.
+   - interrupts: interrupts of the interrupt parent which are used for external
+     wakeup interrupts from pins of the bank, must contain interrupts for all
+     pins of the bank.
+
 Aliases:
 
 All the pin controller nodes should be represented in the aliases node using
 the following format 'pinctrl{n}' where n is a unique number for the alias.
 
+Example: A pin-controller node with pin banks:
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+
+		/* ... */
+
+		/* Pin bank without external interrupts */
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		/* ... */
+
+		/* Pin bank with external GPIO or muxed wake-up interrupts */
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		/* ... */
+
+		/* Pin bank with external direct wake-up interrupts */
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		/* ... */
+	};
+
 Example 1: A pin-controller node with pin groups.
 
 	pinctrl_0: pinctrl@11400000 {
@@ -117,6 +188,8 @@ Example 1: A pin-controller node with pin groups.
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 
+		/* ... */
+
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
 			samsung,pin-function = <2>;
@@ -158,20 +231,14 @@ Example 2: A pin-controller node with external wakeup interrupt controller node.
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
+		interrupts = <0 46 0>
 
-		wakup_eint: wakeup-interrupt-controller {
+		/* ... */
+
+		wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
-					<0 32 0>;
+			interrupts = <0 32 0>;
 		};
 	};
 
@@ -190,7 +257,8 @@ Example 4: Set up the default pin state for uart controller.
 
 	static int s3c24xx_serial_probe(struct platform_device *pdev) {
 		struct pinctrl *pinctrl;
-		...
-		...
+
+		/* ... */
+
 		pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	}

arch/arm/boot/dts/exynos4210-pinctrl.dtsi

@@ -16,6 +16,134 @@
 
 / {
 	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe2: gpe2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe3: gpe3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe4: gpe4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
 			samsung,pin-function = <0x2>;
@@ -205,6 +333,151 @@ i2c1_bus: i2c1-bus {
 	};
 
 	pinctrl@11000000 {
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
 			samsung,pin-function = <2>;
@@ -438,6 +711,11 @@ eint31: ext-int31 {
 	};
 
 	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";

arch/arm/boot/dts/exynos4210.dtsi

@@ -46,27 +46,17 @@ pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
 
 		wakup_eint: wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
-				     <0 32 0>;
+			interrupts = <0 32 0>;
 		};
 	};
 
@@ -74,233 +64,4 @@ pinctrl_2: pinctrl@03860000 {
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x03860000 0x1000>;
 	};
-
-	gpio-controllers {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		gpio-controller;
-		ranges;
-
-		gpa0: gpio-controller@11400000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpa1: gpio-controller@11400020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb: gpio-controller@11400040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc0: gpio-controller@11400060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc1: gpio-controller@11400080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd0: gpio-controller@114000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd1: gpio-controller@114000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe0: gpio-controller@114000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe1: gpio-controller@11400100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe2: gpio-controller@11400120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe3: gpio-controller@11400140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe4: gpio-controller@11400160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf0: gpio-controller@11400180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf1: gpio-controller@114001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf2: gpio-controller@114001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf3: gpio-controller@114001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpj0: gpio-controller@11000000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpj1: gpio-controller@11000020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk0: gpio-controller@11000040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk1: gpio-controller@11000060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk2: gpio-controller@11000080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk3: gpio-controller@110000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl0: gpio-controller@110000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl1: gpio-controller@110000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl2: gpio-controller@11000100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy0: gpio-controller@11000120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy1: gpio-controller@11000140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy2: gpio-controller@11000160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy3: gpio-controller@11000180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy4: gpio-controller@110001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy5: gpio-controller@110001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy6: gpio-controller@110001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx0: gpio-controller@11000C00 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C00 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx1: gpio-controller@11000C20 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C20 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx2: gpio-controller@11000C40 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C40 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx3: gpio-controller@11000C60 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C60 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpz: gpio-controller@03860000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x03860000 0x20>;
-			#gpio-cells = <4>;
-		};
-	};
 };

drivers/pinctrl/pinctrl-exynos.h

@@ -17,125 +17,6 @@
  * (at your option) any later version.
  */
 
-#define EXYNOS_GPIO_START(__gpio)	((__gpio##_START) + (__gpio##_NR))
-
-#define EXYNOS4210_GPIO_A0_NR	(8)
-#define EXYNOS4210_GPIO_A1_NR	(6)
-#define EXYNOS4210_GPIO_B_NR	(8)
-#define EXYNOS4210_GPIO_C0_NR	(5)
-#define EXYNOS4210_GPIO_C1_NR	(5)
-#define EXYNOS4210_GPIO_D0_NR	(4)
-#define EXYNOS4210_GPIO_D1_NR	(4)
-#define EXYNOS4210_GPIO_E0_NR	(5)
-#define EXYNOS4210_GPIO_E1_NR	(8)
-#define EXYNOS4210_GPIO_E2_NR	(6)
-#define EXYNOS4210_GPIO_E3_NR	(8)
-#define EXYNOS4210_GPIO_E4_NR	(8)
-#define EXYNOS4210_GPIO_F0_NR	(8)
-#define EXYNOS4210_GPIO_F1_NR	(8)
-#define EXYNOS4210_GPIO_F2_NR	(8)
-#define EXYNOS4210_GPIO_F3_NR	(6)
-#define EXYNOS4210_GPIO_J0_NR	(8)
-#define EXYNOS4210_GPIO_J1_NR	(5)
-#define EXYNOS4210_GPIO_K0_NR	(7)
-#define EXYNOS4210_GPIO_K1_NR	(7)
-#define EXYNOS4210_GPIO_K2_NR	(7)
-#define EXYNOS4210_GPIO_K3_NR	(7)
-#define EXYNOS4210_GPIO_L0_NR	(8)
-#define EXYNOS4210_GPIO_L1_NR	(3)
-#define EXYNOS4210_GPIO_L2_NR	(8)
-#define EXYNOS4210_GPIO_Y0_NR	(6)
-#define EXYNOS4210_GPIO_Y1_NR	(4)
-#define EXYNOS4210_GPIO_Y2_NR	(6)
-#define EXYNOS4210_GPIO_Y3_NR	(8)
-#define EXYNOS4210_GPIO_Y4_NR	(8)
-#define EXYNOS4210_GPIO_Y5_NR	(8)
-#define EXYNOS4210_GPIO_Y6_NR	(8)
-#define EXYNOS4210_GPIO_X0_NR	(8)
-#define EXYNOS4210_GPIO_X1_NR	(8)
-#define EXYNOS4210_GPIO_X2_NR	(8)
-#define EXYNOS4210_GPIO_X3_NR	(8)
-#define EXYNOS4210_GPIO_Z_NR	(7)
-
-enum exynos4210_gpio_xa_start {
-	EXYNOS4210_GPIO_A0_START	= 0,
-	EXYNOS4210_GPIO_A1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0),
-	EXYNOS4210_GPIO_B_START		= EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1),
-	EXYNOS4210_GPIO_C0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_B),
-	EXYNOS4210_GPIO_C1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0),
-	EXYNOS4210_GPIO_D0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1),
-	EXYNOS4210_GPIO_D1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0),
-	EXYNOS4210_GPIO_E0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1),
-	EXYNOS4210_GPIO_E1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0),
-	EXYNOS4210_GPIO_E2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1),
-	EXYNOS4210_GPIO_E3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2),
-	EXYNOS4210_GPIO_E4_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3),
-	EXYNOS4210_GPIO_F0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4),
-	EXYNOS4210_GPIO_F1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0),
-	EXYNOS4210_GPIO_F2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1),
-	EXYNOS4210_GPIO_F3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2),
-};
-
-enum exynos4210_gpio_xb_start {
-	EXYNOS4210_GPIO_J0_START	= 0,
-	EXYNOS4210_GPIO_J1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0),
-	EXYNOS4210_GPIO_K0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1),
-	EXYNOS4210_GPIO_K1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0),
-	EXYNOS4210_GPIO_K2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1),
-	EXYNOS4210_GPIO_K3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2),
-	EXYNOS4210_GPIO_L0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3),
-	EXYNOS4210_GPIO_L1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0),
-	EXYNOS4210_GPIO_L2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1),
-	EXYNOS4210_GPIO_Y0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2),
-	EXYNOS4210_GPIO_Y1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0),
-	EXYNOS4210_GPIO_Y2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1),
-	EXYNOS4210_GPIO_Y3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2),
-	EXYNOS4210_GPIO_Y4_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3),
-	EXYNOS4210_GPIO_Y5_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4),
-	EXYNOS4210_GPIO_Y6_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5),
-	EXYNOS4210_GPIO_X0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6),
-	EXYNOS4210_GPIO_X1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0),
-	EXYNOS4210_GPIO_X2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1),
-	EXYNOS4210_GPIO_X3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2),
-};
-
-enum exynos4210_gpio_xc_start {
-	EXYNOS4210_GPIO_Z_START		= 0,
-};
-
-#define	EXYNOS4210_GPIO_A0_IRQ		EXYNOS4210_GPIO_A0_START
-#define	EXYNOS4210_GPIO_A1_IRQ		EXYNOS4210_GPIO_A1_START
-#define	EXYNOS4210_GPIO_B_IRQ		EXYNOS4210_GPIO_B_START
-#define	EXYNOS4210_GPIO_C0_IRQ		EXYNOS4210_GPIO_C0_START
-#define	EXYNOS4210_GPIO_C1_IRQ		EXYNOS4210_GPIO_C1_START
-#define	EXYNOS4210_GPIO_D0_IRQ		EXYNOS4210_GPIO_D0_START
-#define	EXYNOS4210_GPIO_D1_IRQ		EXYNOS4210_GPIO_D1_START
-#define	EXYNOS4210_GPIO_E0_IRQ		EXYNOS4210_GPIO_E0_START
-#define	EXYNOS4210_GPIO_E1_IRQ		EXYNOS4210_GPIO_E1_START
-#define	EXYNOS4210_GPIO_E2_IRQ		EXYNOS4210_GPIO_E2_START
-#define	EXYNOS4210_GPIO_E3_IRQ		EXYNOS4210_GPIO_E3_START
-#define	EXYNOS4210_GPIO_E4_IRQ		EXYNOS4210_GPIO_E4_START
-#define	EXYNOS4210_GPIO_F0_IRQ		EXYNOS4210_GPIO_F0_START
-#define	EXYNOS4210_GPIO_F1_IRQ		EXYNOS4210_GPIO_F1_START
-#define	EXYNOS4210_GPIO_F2_IRQ		EXYNOS4210_GPIO_F2_START
-#define	EXYNOS4210_GPIO_F3_IRQ		EXYNOS4210_GPIO_F3_START
-#define	EXYNOS4210_GPIO_J0_IRQ		EXYNOS4210_GPIO_J0_START
-#define	EXYNOS4210_GPIO_J1_IRQ		EXYNOS4210_GPIO_J1_START
-#define	EXYNOS4210_GPIO_K0_IRQ		EXYNOS4210_GPIO_K0_START
-#define	EXYNOS4210_GPIO_K1_IRQ		EXYNOS4210_GPIO_K1_START
-#define	EXYNOS4210_GPIO_K2_IRQ		EXYNOS4210_GPIO_K2_START
-#define	EXYNOS4210_GPIO_K3_IRQ		EXYNOS4210_GPIO_K3_START
-#define	EXYNOS4210_GPIO_L0_IRQ		EXYNOS4210_GPIO_L0_START
-#define	EXYNOS4210_GPIO_L1_IRQ		EXYNOS4210_GPIO_L1_START
-#define	EXYNOS4210_GPIO_L2_IRQ		EXYNOS4210_GPIO_L2_START
-#define	EXYNOS4210_GPIO_Z_IRQ		EXYNOS4210_GPIO_Z_START
-
-#define EXYNOS4210_GPIOA_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
-#define EXYNOS4210_GPIOA_NR_GINT	EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
-#define EXYNOS4210_GPIOB_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3)
-#define EXYNOS4210_GPIOB_NR_GINT	EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2)
-#define EXYNOS4210_GPIOC_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z)
-
 /* External GPIO and wakeup interrupt related definitions */
 #define EXYNOS_GPIO_ECON_OFFSET		0x700
 #define EXYNOS_GPIO_EMASK_OFFSET	0x900
@@ -165,11 +46,10 @@ enum exynos4210_gpio_xc_start {
 #define EXYNOS_EINT_MAX_PER_BANK	8
 #define EXYNOS_EINT_NR_WKUP_EINT
 
-#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id)		\
+#define EXYNOS_PIN_BANK_EINTN(pins, reg, id)		\
 	{						\
 		.pctl_offset	= reg,			\
-		.pin_base	= (__gpio##_START),	\
-		.nr_pins	= (__gpio##_NR),	\
+		.nr_pins	= pins,			\
 		.func_width	= 4,			\
 		.pud_width	= 2,			\
 		.drv_width	= 2,			\
@@ -179,40 +59,50 @@ enum exynos4210_gpio_xc_start {
 		.name		= id			\
 	}
 
-#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id)		\
+#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs)	\
 	{						\
 		.pctl_offset	= reg,			\
-		.pin_base	= (__gpio##_START),	\
-		.nr_pins	= (__gpio##_NR),	\
+		.nr_pins	= pins,			\
 		.func_width	= 4,			\
 		.pud_width	= 2,			\
 		.drv_width	= 2,			\
 		.conpdn_width	= 2,			\
 		.pudpdn_width	= 2,			\
 		.eint_type	= EINT_TYPE_GPIO,	\
-		.irq_base	= (__gpio##_IRQ),	\
+		.eint_offset	= offs,			\
 		.name		= id			\
 	}
 
-/**
- * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks.
- * @bank: pin bank from which this gpio interrupt originates.
- * @pin: pin number within the bank.
- * @eint_offset: offset to be added to the con/pend/mask register bank base.
- */
-struct exynos_geint_data {
-	struct samsung_pin_bank	*bank;
-	u32			pin;
-	u32			eint_offset;
-};
+#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs)	\
+	{						\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.func_width	= 4,			\
+		.pud_width	= 2,			\
+		.drv_width	= 2,			\
+		.eint_type	= EINT_TYPE_WKUP,	\
+		.eint_offset	= offs,			\
+		.name		= id			\
+	}
 
 /**
  * struct exynos_weint_data: irq specific data for all the wakeup interrupts
  * generated by the external wakeup interrupt controller.
- * @domain: irq domain representing the external wakeup interrupts
  * @irq: interrupt number within the domain.
+ * @bank: bank responsible for this interrupt
  */
 struct exynos_weint_data {
-	struct irq_domain	*domain;
-	u32			irq;
+	unsigned int irq;
+	struct samsung_pin_bank *bank;
+};
+
+/**
+ * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts
+ * generated by the external wakeup interrupt controller.
+ * @nr_banks: count of banks being part of the mux
+ * @banks: array of banks being part of the mux
+ */
+struct exynos_muxed_weint_data {
+	unsigned int nr_banks;
+	struct samsung_pin_bank *banks[];
 };

drivers/pinctrl/pinctrl-samsung.h

@@ -23,6 +23,8 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
 
+#include <linux/gpio.h>
+
 /* register offsets within a pin bank */
 #define DAT_REG		0x4
 #define PUD_REG		0x8
@@ -64,6 +66,7 @@ enum pincfg_type {
  * @EINT_TYPE_NONE: bank does not support external interrupts
  * @EINT_TYPE_GPIO: bank supportes external gpio interrupts
  * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
+ * @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts
  *
  * Samsung GPIO controller groups all the available pins into banks. The pins
  * in a pin bank can support external gpio interrupts or external wakeup
@@ -76,6 +79,7 @@ enum eint_type {
 	EINT_TYPE_NONE,
 	EINT_TYPE_GPIO,
 	EINT_TYPE_WKUP,
+	EINT_TYPE_WKUP_MUX,
 };
 
 /* maximum length of a pin in pin descriptor (example: "gpa0-0") */
@@ -109,8 +113,12 @@ struct samsung_pinctrl_drv_data;
  * @conpdn_width: width of the sleep mode function selector bin field.
  * @pudpdn_width: width of the sleep mode pull up/down selector bit field.
  * @eint_type: type of the external interrupt supported by the bank.
- * @irq_base: starting controller local irq number of the bank.
  * @name: name to be prefixed for each pin in this pin bank.
+ * @of_node: OF node of the bank.
+ * @drvdata: link to controller driver data
+ * @irq_domain: IRQ domain of the bank.
+ * @gpio_chip: GPIO chip of the bank.
+ * @grange: linux gpio pin range supported by this bank.
  */
 struct samsung_pin_bank {
 	u32		pctl_offset;
@@ -122,8 +130,13 @@ struct samsung_pin_bank {
 	u8		conpdn_width;
 	u8		pudpdn_width;
 	enum eint_type	eint_type;
-	u32		irq_base;
+	u32		eint_offset;
 	char		*name;
+	struct device_node *of_node;
+	struct samsung_pinctrl_drv_data *drvdata;
+	struct irq_domain *irq_domain;
+	struct gpio_chip gpio_chip;
+	struct pinctrl_gpio_range grange;
 };
 
 /**
@@ -132,8 +145,6 @@ struct samsung_pin_bank {
  * @nr_banks: number of pin banks.
  * @base: starting system wide pin number.
  * @nr_pins: number of pins supported by the controller.
- * @nr_gint: number of external gpio interrupts supported.
- * @nr_wint: number of external wakeup interrupts supported.
  * @geint_con: offset of the ext-gpio controller registers.
  * @geint_mask: offset of the ext-gpio interrupt mask registers.
  * @geint_pend: offset of the ext-gpio interrupt pending registers.
@@ -153,8 +164,6 @@ struct samsung_pin_ctrl {
 
 	u32		base;
 	u32		nr_pins;
-	u32		nr_gint;
-	u32		nr_wint;
 
 	u32		geint_con;
 	u32		geint_mask;
@@ -183,8 +192,6 @@ struct samsung_pin_ctrl {
  * @nr_groups: number of such pin groups.
  * @pmx_functions: list of pin functions available to the driver.
  * @nr_function: number of such pin functions.
- * @gc: gpio_chip instance registered with gpiolib.
- * @grange: linux gpio pin range supported by this controller.
  */
 struct samsung_pinctrl_drv_data {
 	void __iomem			*virt_base;
@@ -199,12 +206,6 @@ struct samsung_pinctrl_drv_data {
 	unsigned int			nr_groups;
 	const struct samsung_pmx_func	*pmx_functions;
 	unsigned int			nr_functions;
-
-	struct irq_domain		*gpio_irqd;
-	struct irq_domain		*wkup_irqd;
-
-	struct gpio_chip		*gc;
-	struct pinctrl_gpio_range	grange;
 };
 
 /**