Commit bacd75cf authored by Preethi Banala's avatar Preethi Banala Committed by Jeff Kirsher

i40e/i40evf: Add capability exchange for outer checksum

This patch adds a capability negotiation between VF and PF using ENCAP/
ENCAP_CSUM offload flags in order for the VF to support outer checksum
and TSO offloads for encapsulated packets. These capabilities were assumed
by default and enabled in current hardware. Going forward, these features
needs to be negotiated with PF before advertising to the stack.
Additionally, strip out the mac.type checks for X722 since outer checksums
are enabled based on the ENCAP_CSUM offload negotiation flag and maintain
consistency between drivers in how the features are configured.

Change-ID: Ie380a6f57eca557a2bb575b66b12fae36d308920
Signed-off-by: default avatarPreethi Banala <preethi.banala@intel.com>
Signed-off-by: default avatarAlan Brady <alan.brady@intel.com>
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent dc423b6b
......@@ -9253,6 +9253,8 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
u8 broadcast[ETH_ALEN];
u8 mac_addr[ETH_ALEN];
int etherdev_size;
netdev_features_t hw_enc_features;
netdev_features_t hw_features;
etherdev_size = sizeof(struct i40e_netdev_priv);
netdev = alloc_etherdev_mq(etherdev_size, vsi->alloc_queue_pairs);
......@@ -9263,43 +9265,43 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
np = netdev_priv(netdev);
np->vsi = vsi;
netdev->hw_enc_features |= NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM |
NETIF_F_HIGHDMA |
NETIF_F_SOFT_FEATURES |
NETIF_F_TSO |
NETIF_F_TSO_ECN |
NETIF_F_TSO6 |
NETIF_F_GSO_GRE |
NETIF_F_GSO_GRE_CSUM |
NETIF_F_GSO_IPXIP4 |
NETIF_F_GSO_IPXIP6 |
NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_GSO_UDP_TUNNEL_CSUM |
NETIF_F_GSO_PARTIAL |
NETIF_F_SCTP_CRC |
NETIF_F_RXHASH |
NETIF_F_RXCSUM |
0;
hw_enc_features = NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM |
NETIF_F_HIGHDMA |
NETIF_F_SOFT_FEATURES |
NETIF_F_TSO |
NETIF_F_TSO_ECN |
NETIF_F_TSO6 |
NETIF_F_GSO_GRE |
NETIF_F_GSO_GRE_CSUM |
NETIF_F_GSO_PARTIAL |
NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_GSO_UDP_TUNNEL_CSUM |
NETIF_F_SCTP_CRC |
NETIF_F_RXHASH |
NETIF_F_RXCSUM |
0;
if (!(pf->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE))
netdev->gso_partial_features |= NETIF_F_GSO_UDP_TUNNEL_CSUM;
netdev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
netdev->hw_enc_features |= hw_enc_features;
/* record features VLANs can make use of */
netdev->vlan_features |= netdev->hw_enc_features |
NETIF_F_TSO_MANGLEID;
netdev->vlan_features |= hw_enc_features | NETIF_F_TSO_MANGLEID;
if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
netdev->hw_features |= NETIF_F_NTUPLE;
hw_features = hw_enc_features |
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_CTAG_RX;
netdev->hw_features |= netdev->hw_enc_features |
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_CTAG_RX;
netdev->hw_features |= hw_features;
netdev->features |= netdev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER;
netdev->features |= hw_features | NETIF_F_HW_VLAN_CTAG_FILTER;
netdev->hw_enc_features |= NETIF_F_TSO_MANGLEID;
if (vsi->type == I40E_VSI_MAIN) {
......
......@@ -163,7 +163,8 @@ struct i40e_virtchnl_vsi_resource {
#define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000
#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF 0X00080000
#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00100000
#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000
#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000
#define I40E_VF_BASE_MODE_OFFLOADS (I40E_VIRTCHNL_VF_OFFLOAD_L2 | \
I40E_VIRTCHNL_VF_OFFLOAD_VLAN | \
......
......@@ -1408,6 +1408,13 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg)
I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2;
}
if (vf->driver_caps & I40E_VIRTCHNL_VF_OFFLOAD_ENCAP)
vfres->vf_offload_flags |= I40E_VIRTCHNL_VF_OFFLOAD_ENCAP;
if ((pf->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE) &&
(vf->driver_caps & I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM))
vfres->vf_offload_flags |= I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM;
if (vf->driver_caps & I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING) {
if (pf->flags & I40E_FLAG_MFP_ENABLED) {
dev_err(&pf->pdev->dev,
......
......@@ -163,7 +163,8 @@ struct i40e_virtchnl_vsi_resource {
#define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000
#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF 0X00080000
#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00100000
#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000
#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000
#define I40E_VF_BASE_MODE_OFFLOADS (I40E_VIRTCHNL_VF_OFFLOAD_L2 | \
I40E_VIRTCHNL_VF_OFFLOAD_VLAN | \
......
......@@ -2401,6 +2401,8 @@ int i40evf_process_config(struct i40evf_adapter *adapter)
struct net_device *netdev = adapter->netdev;
struct i40e_vsi *vsi = &adapter->vsi;
int i;
netdev_features_t hw_enc_features;
netdev_features_t hw_features;
/* got VF config message back from PF, now we can parse it */
for (i = 0; i < vfres->num_vsis; i++) {
......@@ -2412,46 +2414,52 @@ int i40evf_process_config(struct i40evf_adapter *adapter)
return -ENODEV;
}
netdev->hw_enc_features |= NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM |
NETIF_F_HIGHDMA |
NETIF_F_SOFT_FEATURES |
NETIF_F_TSO |
NETIF_F_TSO_ECN |
NETIF_F_TSO6 |
hw_enc_features = NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM |
NETIF_F_HIGHDMA |
NETIF_F_SOFT_FEATURES |
NETIF_F_TSO |
NETIF_F_TSO_ECN |
NETIF_F_TSO6 |
NETIF_F_SCTP_CRC |
NETIF_F_RXHASH |
NETIF_F_RXCSUM |
0;
/* advertise to stack only if offloads for encapsulated packets is
* supported
*/
if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_ENCAP) {
hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_GSO_GRE |
NETIF_F_GSO_GRE_CSUM |
NETIF_F_GSO_IPXIP4 |
NETIF_F_GSO_IPXIP6 |
NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_GSO_UDP_TUNNEL_CSUM |
NETIF_F_GSO_PARTIAL |
NETIF_F_SCTP_CRC |
NETIF_F_RXHASH |
NETIF_F_RXCSUM |
0;
if (!(adapter->flags & I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE))
netdev->gso_partial_features |= NETIF_F_GSO_UDP_TUNNEL_CSUM;
netdev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
if (!(vfres->vf_offload_flags &
I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM))
netdev->gso_partial_features |=
NETIF_F_GSO_UDP_TUNNEL_CSUM;
netdev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
netdev->hw_enc_features |= NETIF_F_TSO_MANGLEID;
netdev->hw_enc_features |= hw_enc_features;
}
/* record features VLANs can make use of */
netdev->vlan_features |= netdev->hw_enc_features |
NETIF_F_TSO_MANGLEID;
netdev->vlan_features |= hw_enc_features | NETIF_F_TSO_MANGLEID;
/* Write features and hw_features separately to avoid polluting
* with, or dropping, features that are set when we registgered.
* with, or dropping, features that are set when we registered.
*/
netdev->hw_features |= netdev->hw_enc_features;
hw_features = hw_enc_features;
netdev->features |= netdev->hw_enc_features | I40EVF_VLAN_FEATURES;
netdev->hw_enc_features |= NETIF_F_TSO_MANGLEID;
netdev->hw_features |= hw_features;
/* disable VLAN features if not supported */
if (!(vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_VLAN))
netdev->features ^= I40EVF_VLAN_FEATURES;
netdev->features |= hw_features | I40EVF_VLAN_FEATURES;
adapter->vsi.id = adapter->vsi_res->vsi_id;
......@@ -2592,9 +2600,6 @@ static void i40evf_init_task(struct work_struct *work)
goto err_alloc;
}
if (hw->mac.type == I40E_MAC_X722_VF)
adapter->flags |= I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE;
if (i40evf_process_config(adapter))
goto err_alloc;
adapter->current_op = I40E_VIRTCHNL_OP_UNKNOWN;
......
......@@ -159,7 +159,9 @@ int i40evf_send_vf_config_msg(struct i40evf_adapter *adapter)
I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG |
I40E_VIRTCHNL_VF_OFFLOAD_VLAN |
I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR |
I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2;
I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 |
I40E_VIRTCHNL_VF_OFFLOAD_ENCAP |
I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM;
adapter->current_op = I40E_VIRTCHNL_OP_GET_VF_RESOURCES;
adapter->aq_required &= ~I40EVF_FLAG_AQ_GET_CONFIG;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment