Commit bb29b9cc authored by Anders Darander's avatar Anders Darander Committed by Jacek Anaszewski

leds: pca963x: Add bindings to invert polarity

Add a new DT property, nxp,inverted-out, to invert the polarity
of the output.

Tested on PCA9634.
Signed-off-by: default avatarAnders Darander <anders@chargestorm.se>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarJacek Anaszewski <jacek.anaszewski@gmail.com>
parent 2ea659a9
......@@ -10,6 +10,7 @@ Optional properties:
- nxp,period-scale : In some configurations, the chip blinks faster than expected.
This parameter provides a scaling ratio (fixed point, decimal divided
by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
- nxp,inverted-out: invert the polarity of the generated PWM
Each led is represented as a sub-node of the nxp,pca963x device.
......
......@@ -342,6 +342,12 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
chip->scaling = 1000;
/* default to non-inverted output, unless inverted is specified */
if (of_property_read_bool(np, "nxp,inverted-out"))
pdata->dir = PCA963X_INVERTED;
else
pdata->dir = PCA963X_NORMAL;
return pdata;
}
......@@ -452,11 +458,18 @@ static int pca963x_probe(struct i2c_client *client,
i2c_smbus_write_byte_data(client, PCA963X_MODE1, BIT(4));
if (pdata) {
u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
PCA963X_MODE2);
/* Configure output: open-drain or totem pole (push-pull) */
if (pdata->outdrv == PCA963X_OPEN_DRAIN)
i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
mode2 |= 0x01;
else
i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x05);
mode2 |= 0x05;
/* Configure direction: normal or inverted */
if (pdata->dir == PCA963X_INVERTED)
mode2 |= 0x10;
i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
mode2);
}
return 0;
......
......@@ -33,10 +33,16 @@ enum pca963x_blink_type {
PCA963X_HW_BLINK,
};
enum pca963x_direction {
PCA963X_NORMAL,
PCA963X_INVERTED,
};
struct pca963x_platform_data {
struct led_platform_data leds;
enum pca963x_outdrv outdrv;
enum pca963x_blink_type blink_type;
enum pca963x_direction dir;
};
#endif /* __LINUX_PCA963X_H*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment