md: fix problem when adding device to read-only array with bitmap.

commit 8313b8e5 upstream.

If an array is started degraded, and then the missing device
is found it can be re-added and a minimal bitmap-based recovery
will bring it fully up-to-date.

If the array is read-only a recovery would not be allowed.
But also if the array is read-only and the missing device was
present very recently, then there could be no need for any
recovery at all, so we simply include the device in the read-only
array without any recovery.

However... if the missing device was removed a little longer ago
it could be missing some updates, but if a bitmap is present it will
be conditionally accepted pending a bitmap-based update.  We don't
currently detect this case properly and will include that old
device into the read-only array with no recovery even though it really
needs a recovery.

This patch keeps track of whether a bitmap-based-recovery is really
needed or not in the new Bitmap_sync rdev flag.  If that is set,
then the device will not be added to a read-only array.

Cc: Andrei Warkentin <andreiw@vmware.com>
Fixes: d70ed2e4Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/md/md.c

@@ -1118,6 +1118,7 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev)
 	rdev->raid_disk = -1;
 	clear_bit(Faulty, &rdev->flags);
 	clear_bit(In_sync, &rdev->flags);
+	clear_bit(Bitmap_sync, &rdev->flags);
 	clear_bit(WriteMostly, &rdev->flags);
 
 	if (mddev->raid_disks == 0) {
@@ -1196,6 +1197,8 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev)
 		 */
 		if (ev1 < mddev->bitmap->events_cleared)
 			return 0;
+		if (ev1 < mddev->events)
+			set_bit(Bitmap_sync, &rdev->flags);
 	} else {
 		if (ev1 < mddev->events)
 			/* just a hot-add of a new device, leave raid_disk at -1 */
@@ -1604,6 +1607,7 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
 	rdev->raid_disk = -1;
 	clear_bit(Faulty, &rdev->flags);
 	clear_bit(In_sync, &rdev->flags);
+	clear_bit(Bitmap_sync, &rdev->flags);
 	clear_bit(WriteMostly, &rdev->flags);
 
 	if (mddev->raid_disks == 0) {
@@ -1686,6 +1690,8 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
 		 */
 		if (ev1 < mddev->bitmap->events_cleared)
 			return 0;
+		if (ev1 < mddev->events)
+			set_bit(Bitmap_sync, &rdev->flags);
 	} else {
 		if (ev1 < mddev->events)
 			/* just a hot-add of a new device, leave raid_disk at -1 */
@@ -2829,6 +2835,7 @@ slot_store(struct md_rdev *rdev, const char *buf, size_t len)
 		else
 			rdev->saved_raid_disk = -1;
 		clear_bit(In_sync, &rdev->flags);
+		clear_bit(Bitmap_sync, &rdev->flags);
 		err = rdev->mddev->pers->
 			hot_add_disk(rdev->mddev, rdev);
 		if (err) {
@@ -5761,6 +5768,7 @@ static int add_new_disk(struct mddev * mddev, mdu_disk_info_t *info)
 			    info->raid_disk < mddev->raid_disks) {
 				rdev->raid_disk = info->raid_disk;
 				set_bit(In_sync, &rdev->flags);
+				clear_bit(Bitmap_sync, &rdev->flags);
 			} else
 				rdev->raid_disk = -1;
 		} else
@@ -7694,7 +7702,8 @@ static int remove_and_add_spares(struct mddev *mddev,
 		if (test_bit(Faulty, &rdev->flags))
 			continue;
 		if (mddev->ro &&
-		    rdev->saved_raid_disk < 0)
+		    ! (rdev->saved_raid_disk >= 0 &&
+		       !test_bit(Bitmap_sync, &rdev->flags)))
 			continue;
 
 		rdev->recovery_offset = 0;
@@ -7775,9 +7784,12 @@ void md_check_recovery(struct mddev *mddev)
 			 * As we only add devices that are already in-sync,
 			 * we can activate the spares immediately.
 			 */
-			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 			remove_and_add_spares(mddev, NULL);
-			mddev->pers->spare_active(mddev);
+			/* There is no thread, but we need to call
+			 * ->spare_active and clear saved_raid_disk
+			 */
+			md_reap_sync_thread(mddev);
+			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 			goto unlock;
 		}
 

drivers/md/md.h

@@ -129,6 +129,9 @@ struct md_rdev {
 enum flag_bits {
 	Faulty,			/* device is known to have a fault */
 	In_sync,		/* device is in_sync with rest of array */
+	Bitmap_sync,		/* ..actually, not quite In_sync.  Need a
+				 * bitmap-based recovery to get fully in sync
+				 */
 	Unmerged,		/* device is being added to array and should
 				 * be considerred for bvec_merge_fn but not
 				 * yet for actual IO