Commit bb8f563c authored by Rabin Vincent's avatar Rabin Vincent Committed by Russell King

ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback

Platforms may have some external power control which need to be
controlled from board specific code.  Rename the translate_vdd()
callback to vdd_handler() and pass it the power mode.
Acked-by: default avatarLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: default avatarRabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent f5e2574e
...@@ -493,16 +493,9 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ...@@ -493,16 +493,9 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* This implicitly enables the regulator */ /* This implicitly enables the regulator */
mmc_regulator_set_ocr(host->vcc, ios->vdd); mmc_regulator_set_ocr(host->vcc, ios->vdd);
#endif #endif
/* if (host->plat->vdd_handler)
* The translate_vdd function is not used if you have pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd,
* an external regulator, or your design is really weird. ios->power_mode);
* Using it would mean sending in power control BOTH using
* a regulator AND the 4 MMCIPWR bits. If we don't have
* a regulator, we might have some other platform specific
* power control behind this translate function.
*/
if (!host->vcc && host->plat->translate_vdd)
pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
/* The ST version does not have this, fall through to POWER_ON */ /* The ST version does not have this, fall through to POWER_ON */
if (host->hw_designer != AMBA_VENDOR_ST) { if (host->hw_designer != AMBA_VENDOR_ST) {
pwr |= MCI_PWR_UP; pwr |= MCI_PWR_UP;
......
...@@ -15,9 +15,10 @@ ...@@ -15,9 +15,10 @@
* @ocr_mask: available voltages on the 4 pins from the block, this * @ocr_mask: available voltages on the 4 pins from the block, this
* is ignored if a regulator is used, see the MMC_VDD_* masks in * is ignored if a regulator is used, see the MMC_VDD_* masks in
* mmc/host.h * mmc/host.h
* @translate_vdd: a callback function to translate a MMC_VDD_* * @vdd_handler: a callback function to translate a MMC_VDD_*
* mask into a value to be binary or:ed and written into the * mask into a value to be binary (or set some other custom bits
* MMCIPWR register of the block * in MMCIPWR) or:ed and written into the MMCIPWR register of the
* block. May also control external power based on the power_mode.
* @status: if no GPIO read function was given to the block in * @status: if no GPIO read function was given to the block in
* gpio_wp (below) this function will be called to determine * gpio_wp (below) this function will be called to determine
* whether a card is present in the MMC slot or not * whether a card is present in the MMC slot or not
...@@ -29,7 +30,8 @@ ...@@ -29,7 +30,8 @@
struct mmci_platform_data { struct mmci_platform_data {
unsigned int f_max; unsigned int f_max;
unsigned int ocr_mask; unsigned int ocr_mask;
u32 (*translate_vdd)(struct device *, unsigned int); u32 (*vdd_handler)(struct device *, unsigned int vdd,
unsigned char power_mode);
unsigned int (*status)(struct device *); unsigned int (*status)(struct device *);
int gpio_wp; int gpio_wp;
int gpio_cd; int gpio_cd;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment