can: flexcan: Disable error interrupt when bus error reporting is disabled

In case we don't have FLEXCAN_HAS_BROKEN_ERR_STATE and the user set
CAN_CTRLMODE_BERR_REPORTING once it can not be unset again until reboot.
So in case neither hardware nor user wants the error interrupt disable
the bit.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/flexcan.c

@@ -852,6 +852,8 @@ static int flexcan_chip_start(struct net_device *dev)
 	if (priv->devtype_data->features & FLEXCAN_HAS_BROKEN_ERR_STATE ||
 	    priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
 		reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
+	else
+		reg_ctrl &= ~FLEXCAN_CTRL_ERR_MSK;
 
 	/* save for later use */
 	priv->reg_ctrl_default = reg_ctrl;