Merge tag 'for-5.12/libata-2021-02-17' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "Regulartors management addition from Florian, and a trivial change to
  avoid comma separated statements from Joe"

* tag 'for-5.12/libata-2021-02-17' of git://git.kernel.dk/linux-block:
  ata: Avoid comma separated statements
  ata: ahci_brcm: Add back regulators management

drivers/ata/ahci_brcm.c

@@ -377,6 +377,10 @@ static int __maybe_unused brcm_ahci_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	ret = ahci_platform_enable_regulators(hpriv);
+	if (ret)
+		goto out_disable_clks;
+
 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
 	brcm_sata_alpm_init(hpriv);
@@ -406,6 +410,8 @@ static int __maybe_unused brcm_ahci_resume(struct device *dev)
 	ahci_platform_disable_phys(hpriv);
 out_disable_phys:
 	brcm_sata_phys_disable(priv);
+	ahci_platform_disable_regulators(hpriv);
+out_disable_clks:
 	ahci_platform_disable_clks(hpriv);
 	return ret;
 }
@@ -490,6 +496,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_reset;
 
+	ret = ahci_platform_enable_regulators(hpriv);
+	if (ret)
+		goto out_disable_clks;
+
 	/* Must be first so as to configure endianness including that
 	 * of the standard AHCI register space.
 	 */
@@ -499,7 +509,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
 	if (!priv->port_mask) {
 		ret = -ENODEV;
-		goto out_disable_clks;
+		goto out_disable_regulators;
 	}
 
 	/* Must be done before ahci_platform_enable_phys() */
@@ -524,6 +534,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	ahci_platform_disable_phys(hpriv);
 out_disable_phys:
 	brcm_sata_phys_disable(priv);
+out_disable_regulators:
+	ahci_platform_disable_regulators(hpriv);
 out_disable_clks:
 	ahci_platform_disable_clks(hpriv);
 out_reset:

drivers/ata/pata_icside.c

@@ -202,14 +202,19 @@ static void pata_icside_set_dmamode(struct ata_port *ap, struct ata_device *adev
 	 * Choose the IOMD cycle timing which ensure that the interface
 	 * satisfies the measured active, recovery and cycle times.
 	 */
-	if (t.active <= 50 && t.recover <= 375 && t.cycle <= 425)
-		iomd_type = 'D', cycle = 187;
-	else if (t.active <= 125 && t.recover <= 375 && t.cycle <= 500)
-		iomd_type = 'C', cycle = 250;
-	else if (t.active <= 200 && t.recover <= 550 && t.cycle <= 750)
-		iomd_type = 'B', cycle = 437;
-	else
-		iomd_type = 'A', cycle = 562;
+	if (t.active <= 50 && t.recover <= 375 && t.cycle <= 425) {
+		iomd_type = 'D';
+		cycle = 187;
+	} else if (t.active <= 125 && t.recover <= 375 && t.cycle <= 500) {
+		iomd_type = 'C';
+		cycle = 250;
+	} else if (t.active <= 200 && t.recover <= 550 && t.cycle <= 750) {
+		iomd_type = 'B';
+		cycle = 437;
+	} else {
+		iomd_type = 'A';
+		cycle = 562;
+	}
 
 	ata_dev_info(adev, "timings: act %dns rec %dns cyc %dns (%c)\n",
 		     t.active, t.recover, t.cycle, iomd_type);