brcmfmac: Set board_type from DMI on x86 based machines

For x86 based machines, set the board_type used for nvram file selection
based on the DMI sys-vendor and product-name strings.

Since on some models these strings are too generic, this commit also adds
a quirk table overriding the strings for models listed in that table.

The board_type setting is used to load the board-specific nvram file with
a board-specific name so that we can ship files for each supported board
in linux-firmware.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile

@@ -54,3 +54,5 @@ brcmfmac-$(CONFIG_BRCM_TRACING) += \
 		tracepoint.o
 brcmfmac-$(CONFIG_OF) += \
 		of.o
+brcmfmac-$(CONFIG_DMI) += \
+		dmi.o

drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c

@@ -448,8 +448,9 @@ struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
 		}
 	}
 	if (!found) {
-		/* No platform data for this device, try OF (Open Firwmare) */
+		/* No platform data for this device, try OF and DMI data */
 		brcmf_of_probe(dev, bus_type, settings);
+		brcmf_dmi_probe(settings, chip, chiprev);
 	}
 	return settings;
 }

drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h

@@ -75,4 +75,11 @@ void brcmf_release_module_param(struct brcmf_mp_device *module_param);
 /* Sets dongle media info (drv_version, mac address). */
 int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
 
+#ifdef CONFIG_DMI
+void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev);
+#else
+static inline void
+brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev) {}
+#endif
+
 #endif /* BRCMFMAC_COMMON_H */

drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c

+/*
+ * Copyright 2018 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/dmi.h>
+#include <linux/mod_devicetable.h>
+#include "core.h"
+#include "common.h"
+#include "brcm_hw_ids.h"
+
+/* The DMI data never changes so we can use a static buf for this */
+static char dmi_board_type[128];
+
+struct brcmf_dmi_data {
+	u32 chip;
+	u32 chiprev;
+	const char *board_type;
+};
+
+/* NOTE: Please keep all entries sorted alphabetically */
+
+static const struct brcmf_dmi_data gpd_win_pocket_data = {
+	BRCM_CC_4356_CHIP_ID, 2, "gpd-win-pocket"
+};
+
+static const struct brcmf_dmi_data jumper_ezpad_mini3_data = {
+	BRCM_CC_43430_CHIP_ID, 0, "jumper-ezpad-mini3"
+};
+
+static const struct brcmf_dmi_data meegopad_t08_data = {
+	BRCM_CC_43340_CHIP_ID, 2, "meegopad-t08"
+};
+
+static const struct dmi_system_id dmi_platform_data[] = {
+	{
+		/* Match for the GPDwin which unfortunately uses somewhat
+		 * generic dmi strings, which is why we test for 4 strings.
+		 * Comparing against 23 other byt/cht boards, board_vendor
+		 * and board_name are unique to the GPDwin, where as only one
+		 * other board has the same board_serial and 3 others have
+		 * the same default product_name. Also the GPDwin is the
+		 * only device to have both board_ and product_name not set.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Default string"),
+			DMI_MATCH(DMI_BOARD_SERIAL, "Default string"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_win_pocket_data,
+	},
+	{
+		/* Jumper EZpad mini3 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
+			/* jumperx.T87.KFBNEEA02 with the version-nr dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"),
+		},
+		.driver_data = (void *)&jumper_ezpad_mini3_data,
+	},
+	{
+		/* Meegopad T08 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
+			DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
+		},
+		.driver_data = (void *)&meegopad_t08_data,
+	},
+	{}
+};
+
+void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev)
+{
+	const struct dmi_system_id *match;
+	const struct brcmf_dmi_data *data;
+	const char *sys_vendor;
+	const char *product_name;
+
+	/* Some models have DMI strings which are too generic, e.g.
+	 * "Default string", we use a quirk table for these.
+	 */
+	for (match = dmi_first_match(dmi_platform_data);
+	     match;
+	     match = dmi_first_match(match + 1)) {
+		data = match->driver_data;
+
+		if (data->chip == chip && data->chiprev == chiprev) {
+			settings->board_type = data->board_type;
+			return;
+		}
+	}
+
+	/* Not found in the quirk-table, use sys_vendor-product_name */
+	sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (sys_vendor && product_name) {
+		snprintf(dmi_board_type, sizeof(dmi_board_type), "%s-%s",
+			 sys_vendor, product_name);
+		settings->board_type = dmi_board_type;
+	}
+}