Commit bd329e12 authored by Bjørn Mork's avatar Bjørn Mork Committed by David S. Miller

net: cdc_ncm: do not bind to NCM compatible MBIM devices

The MBIM specification allows a MBIM device to disguise
itself as NCM for backwards compatibility, using additional
altsettings with different subclass (control) or protocol
(data):

C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=7ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=7ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

If the MBIM driver is enabled then that should have priority
for devices providing such a NCM 1.0 backward compatibility
mode.
Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
Signed-off-by: default avatarGreg Suarez <gsuarez@smithmicro.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9084ccf9
......@@ -563,6 +563,33 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret;
/* The MBIM spec defines a NCM compatible default altsetting,
* which we may have matched:
*
* "Functions that implement both NCM 1.0 and MBIM (an
* “NCM/MBIM function”) according to this recommendation
* shall provide two alternate settings for the
* Communication Interface. Alternate setting 0, and the
* associated class and endpoint descriptors, shall be
* constructed according to the rules given for the
* Communication Interface in section 5 of [USBNCM10].
* Alternate setting 1, and the associated class and
* endpoint descriptors, shall be constructed according to
* the rules given in section 6 (USB Device Model) of this
* specification."
*
* Do not bind to such interfaces, allowing cdc_mbim to handle
* them
*/
#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
if ((intf->num_altsetting == 2) &&
!usb_set_interface(dev->udev,
intf->cur_altsetting->desc.bInterfaceNumber,
CDC_NCM_COMM_ALTSETTING_MBIM) &&
cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
return -ENODEV;
#endif
/* NCM data altsetting is always 1 */
ret = cdc_ncm_bind_common(dev, intf, 1);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment