Commit bd939250 authored by Brian Masney's avatar Brian Masney Committed by Andy Gross

ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity

This patch adds device tree bindings for the tsl2772 ALS / proximity
sensor for the LG Nexus 5 (hammerhead) phone.
Signed-off-by: default avatarBrian Masney <masneyb@onstation.org>
Signed-off-by: default avatarJonathan Marek <jonathan@marek.ca>
Acked-by: default avatarJonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
parent fe8d81fe
...@@ -242,6 +242,15 @@ cmd-data { ...@@ -242,6 +242,15 @@ cmd-data {
}; };
}; };
i2c3_pins: i2c3 {
mux {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
};
i2c12_pins: i2c12 { i2c12_pins: i2c12 {
mux { mux {
pins = "gpio87", "gpio88"; pins = "gpio87", "gpio88";
...@@ -333,6 +342,24 @@ bmp280@76 { ...@@ -333,6 +342,24 @@ bmp280@76 {
}; };
}; };
}; };
i2c@f9925000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <100000>;
qcom,src-freq = <50000000>;
avago_apds993@39 {
compatible = "avago,apds9930";
reg = <0x39>;
interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8941_l17>;
vddio-supply = <&pm8941_lvs1>;
led-max-microamp = <100000>;
amstaos,proximity-diodes = <0>;
};
};
}; };
&spmi_bus { &spmi_bus {
......
...@@ -715,6 +715,17 @@ i2c@f9924000 { ...@@ -715,6 +715,17 @@ i2c@f9924000 {
#size-cells = <0>; #size-cells = <0>;
}; };
blsp_i2c3: i2c@f9925000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
interrupts = <0 97 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
blsp_i2c8: i2c@f9964000 { blsp_i2c8: i2c@f9964000 {
status = "disabled"; status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1"; compatible = "qcom,i2c-qup-v2.1.1";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment