Merge branch 'next/fixes-samsung' of...

Merge branch 'next/fixes-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/fixes-non-critical

From Kukjin Kim:
Here is Samsung fixes for v3.9 and it is not a critical fixes.

* 'next/fixes-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
  ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
  ARM: SAMSUNG: Silence empty switch warning in sdhci.h
  ARM: S5PV210: Fix early uart output in fifo mode
  ARM: S3C24XX: Fix compile breakage for SMDK2410
  ARM: S3C24XX: add missing platform_device.h include for osiris
  ARM: S3C24XX: let S3C2412_PM select S3C2412_PM_SLEEP
  ARM: SAMSUNG: Gracefully exit on suspend failure
  ARM: SAMSUNG: using vsnprintf instead of vsprintf for the limit buffer length 256
  ARM: S3C24XX: Make 'clk_msysclk' static

arch/arm/boot/dts/exynos4x12-pinctrl.dtsi

@@ -661,7 +661,7 @@ sd4_bus4: sd4-bus-width4 {
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
+			samsung,pin-function = <4>;
 			samsung,pin-pud = <4>;
 			samsung,pin-drv = <3>;
 		};

arch/arm/mach-exynos/pm.c

@@ -91,8 +91,8 @@ static int exynos_cpu_suspend(unsigned long arg)
 	/* issue the standby signal into the pm unit. */
 	cpu_do_idle();
 
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void exynos_pm_prepare(void)
@@ -282,6 +282,8 @@ static void exynos_pm_resume(void)
 	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
 		tmp |= S5P_CENTRAL_LOWPWR_CFG;
 		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+		/* clear the wakeup state register */
+		__raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
 		goto early_wakeup;
 	}

arch/arm/mach-s3c24xx/Kconfig

@@ -226,6 +226,7 @@ config MACH_QT2410
 config ARCH_SMDK2410
 	bool "SMDK2410/A9M2410"
 	select S3C24XX_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2410 or the derived module A9M2410
 	  <http://www.fsforth.de>
@@ -273,6 +274,7 @@ config S3C2412_DMA
 
 config S3C2412_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2412 power management
 

arch/arm/mach-s3c24xx/common-s3c2443.c

@@ -132,7 +132,7 @@ static struct clk *clk_msysclk_sources[] = {
 	[3] = &clk_mpllref,
 };
 
-struct clksrc_clk clk_msysclk = {
+static struct clksrc_clk clk_msysclk = {
 	.clk	= {
 		.name		= "msysclk",
 		.parent		= &clk_xtal,

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include <linux/i2c/tps65010.h>
 

arch/arm/mach-s3c24xx/pm-s3c2412.c

@@ -48,7 +48,8 @@ static int s3c2412_cpu_suspend(unsigned long arg)
 
 	s3c2412_sleep_enter();
 
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void s3c2412_pm_prepare(void)

arch/arm/mach-s3c24xx/pm-s3c2416.c

@@ -34,7 +34,8 @@ static int s3c2416_cpu_suspend(unsigned long arg)
 
 	s3c2412_sleep_enter();
 
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void s3c2416_pm_prepare(void)

arch/arm/mach-s3c64xx/pm.c

@@ -296,7 +296,8 @@ static int s3c64xx_cpu_suspend(unsigned long arg)
 
 	/* we should never get past here */
 
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 /* mapping of interrupts to parts of the wakeup mask */

arch/arm/mach-s5p64x0/pm.c

@@ -103,8 +103,8 @@ static int s5p64x0_cpu_suspend(unsigned long arg)
 	    "mcr p15, 0, %0, c7, c10, 4\n\t"
 	    "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
 
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 /* mapping of interrupts to parts of the wakeup mask */

arch/arm/mach-s5pv210/include/mach/uncompress.h

@@ -19,6 +19,8 @@
 static void arch_detect_cpu(void)
 {
 	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S5PV210_UFSTAT_TXMASK;
+	fifo_max = 63 << S5PV210_UFSTAT_TXSHIFT;
 }
 
 #endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s5pv210/pm.c

@@ -104,8 +104,8 @@ static int s5pv210_cpu_suspend(unsigned long arg)
 	    "mcr p15, 0, %0, c7, c10, 4\n\t"
 	    "wfi" : : "r" (tmp));
 
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void s5pv210_pm_prepare(void)

arch/arm/plat-samsung/include/plat/fimc-core.h

@@ -43,6 +43,8 @@ static inline void s3c_fimc_setname(int id, char *name)
 		s5p_device_fimc3.name = name;
 		break;
 #endif
+	default:
+		break;
 	}
 }
 

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -374,6 +374,8 @@ static inline void s3c_sdhci_setname(int id, char *name)
 		s3c_device_hsmmc3.name = name;
 		break;
 #endif
+	default:
+		break;
 	}
 }
 

arch/arm/plat-samsung/pm.c

@@ -51,7 +51,7 @@ void s3c_pm_dbg(const char *fmt, ...)
 	char buff[256];
 
 	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
+	vsnprintf(buff, sizeof(buff), fmt, va);
 	va_end(va);
 
 	printascii(buff);
@@ -243,6 +243,7 @@ int (*pm_cpu_sleep)(unsigned long);
 
 static int s3c_pm_enter(suspend_state_t state)
 {
+	int ret;
 	/* ensure the debug is initialised (if enabled) */
 
 	s3c_pm_debug_init();
@@ -300,7 +301,9 @@ static int s3c_pm_enter(suspend_state_t state)
 	 * we resume as it saves its own register state and restores it
 	 * during the resume.  */
 
-	cpu_suspend(0, pm_cpu_sleep);
+	ret = cpu_suspend(0, pm_cpu_sleep);
+	if (ret)
+		return ret;
 
 	/* restore the system state */