serial: 8250_dw: Fix LCR workaround regression

commit 6979f8d2 upstream.

Commit c49436b6 (serial: 8250_dw: Improve unwritable LCR workaround)
caused a regression. It added a check that the LCR was written properly
to detect and workaround the busy quirk, but the behaviour of bit 5
(UART_LCR_SPAR) differs between IP versions 3.00a and 3.14c per the
docs. On older versions this caused the check to fail and it would
repeatedly force idle and rewrite the LCR register, causing delays and
preventing any input from serial being received.

This is fixed by masking out UART_LCR_SPAR before making the comparison.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Tim Kryger <tim.kryger@linaro.org>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Matt Porter <matt.porter@linaro.org>
Cc: Markus Mayer <markus.mayer@linaro.org>
Tested-by: Tim Kryger <tim.kryger@linaro.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drivers/tty/serial/8250/8250_dw.c

@@ -95,7 +95,8 @@ static void dw8250_serial_out(struct uart_port *p, int offset, int value)
 	if (offset == UART_LCR) {
 		int tries = 1000;
 		while (tries--) {
-			if (value == p->serial_in(p, UART_LCR))
+			unsigned int lcr = p->serial_in(p, UART_LCR);
+			if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
 				return;
 			dw8250_force_idle(p);
 			writeb(value, p->membase + (UART_LCR << p->regshift));
@@ -131,7 +132,8 @@ static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
 	if (offset == UART_LCR) {
 		int tries = 1000;
 		while (tries--) {
-			if (value == p->serial_in(p, UART_LCR))
+			unsigned int lcr = p->serial_in(p, UART_LCR);
+			if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
 				return;
 			dw8250_force_idle(p);
 			writel(value, p->membase + (UART_LCR << p->regshift));