Commit be4ccfce authored by Shawn Guo's avatar Shawn Guo

ARM: dts: imx: use nodes label in board dts

Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi.  Thus, the board
dts files become easier to read and edit with the least indentation
levels.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 8ba47235
......@@ -19,26 +19,18 @@ / {
memory {
reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
};
};
soc {
aips@43f00000 {
uart1: serial@43f90000 {
status = "okay";
};
};
&uart1 {
status = "okay";
};
spba@50000000 {
fec: ethernet@50038000 {
status = "okay";
phy-mode = "rmii";
};
};
&fec {
status = "okay";
phy-mode = "rmii";
};
emi@80000000 {
nand@bb000000 {
nand-on-flash-bbt;
status = "okay";
};
};
};
&nfc {
nand-on-flash-bbt;
status = "okay";
};
......@@ -499,7 +499,7 @@ emi@80000000 {
reg = <0x80000000 0x3b002000>;
ranges;
nand@bb000000 {
nfc: nand@bb000000 {
#address-cells = <1>;
#size-cells = <1>;
......
......@@ -32,58 +32,54 @@ osc26m {
clock-frequency = <0>;
};
};
};
soc {
aipi@10000000 {
serial@1000a000 {
status = "okay";
};
&uart1 {
status = "okay";
};
ethernet@1002b000 {
status = "okay";
};
};
&fec {
status = "okay";
};
nand@d8000000 {
status = "okay";
nand-bus-width = <16>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
&nfc {
status = "okay";
nand-bus-width = <16>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
};
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
};
partition@100000 {
label = "env";
reg = <0x100000 0x80000>;
};
partition@100000 {
label = "env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "env2";
reg = <0x180000 0x80000>;
};
partition@180000 {
label = "env2";
reg = <0x180000 0x80000>;
};
partition@200000 {
label = "firmware";
reg = <0x200000 0x80000>;
};
partition@200000 {
label = "firmware";
reg = <0x200000 0x80000>;
};
partition@280000 {
label = "dtb";
reg = <0x280000 0x80000>;
};
partition@280000 {
label = "dtb";
reg = <0x280000 0x80000>;
};
partition@300000 {
label = "kernel";
reg = <0x300000 0x500000>;
};
partition@300000 {
label = "kernel";
reg = <0x300000 0x500000>;
};
partition@800000 {
label = "rootfs";
reg = <0x800000 0xf800000>;
};
};
partition@800000 {
label = "rootfs";
reg = <0x800000 0xf800000>;
};
};
......@@ -19,19 +19,13 @@ / {
memory {
reg = <0x0 0x0>;
};
};
soc {
aipi@10000000 { /* aipi1 */
uart1: serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
};
&uart1 {
fsl,uart-has-rtscts;
status = "okay";
};
aipi@10020000 { /* aipi2 */
ethernet@1002b000 {
status = "okay";
};
};
};
&fec {
status = "okay";
};
......@@ -19,13 +19,9 @@ / {
memory {
reg = <0x80000000 0x8000000>; /* 128M */
};
};
soc {
aips@43f00000 { /* AIPS1 */
uart5: serial@43fb4000 {
fsl,uart-has-rtscts;
status = "okay";
};
};
};
&uart5 {
fsl,uart-has-rtscts;
status = "okay";
};
This diff is collapsed.
......@@ -21,72 +21,6 @@ memory {
reg = <0x70000000 0x40000000>;
};
soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_2>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
};
iomuxc@53fa8000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
>;
};
};
};
uart1: serial@53fbc000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
};
};
eim-cs1@f4000000 {
#address-cells = <1>;
#size-cells = <1>;
......@@ -162,3 +96,63 @@ volume-down {
};
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_2>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
......@@ -21,107 +21,6 @@ memory {
reg = <0x70000000 0x80000000>;
};
soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio3 14 0>;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
flash: at45db321d@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
spi-max-frequency = <25000000>;
reg = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0x3c0000>;
};
};
};
esdhc@50020000 { /* ESDHC3 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
iomuxc@53fa8000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
>;
};
};
};
uart1: serial@53fbc000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
i2c@63fc4000 { /* I2C2 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
pmic: mc13892@08 {
compatible = "fsl,mc13892", "fsl,mc13xxx";
reg = <0x08>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
};
};
ethernet@63fec000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
};
leds {
compatible = "gpio-leds";
......@@ -132,3 +31,96 @@ green {
};
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio3 14 0>;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
flash: at45db321d@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
spi-max-frequency = <25000000>;
reg = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0x3c0000>;
};
};
};
&esdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
pmic: mc13892@08 {
compatible = "fsl,mc13892", "fsl,mc13xxx";
reg = <0x08>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
......@@ -21,200 +21,6 @@ memory {
reg = <0x70000000 0x40000000>;
};
soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
status = "okay";
};
ssi2: ssi@50014000 {
fsl,mode = "i2s-slave";
status = "okay";
};
esdhc@50020000 { /* ESDHC3 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
iomuxc@53fa8000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
>;
};
led_pin_gpio7_7: led_gpio7_7@0 {
fsl,pins = <
873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
>;
};
};
};
uart1: serial@53fbc000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
i2c@63fc4000 { /* I2C2 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p2v>;
VDDIO-supply = <&reg_3p2v>;
};
};
i2c@63fc8000 { /* I2C1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
compatible = "fsl,mma8450";
reg = <0x1c>;
};
pmic: dialog@48 {
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
interrupt-parent = <&gpio7>;
interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
regulators {
buck1_reg: buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
regulator-always-on;
};
buck2_reg: buck2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
regulator-always-on;
};
buck3_reg: buck3 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
buck4_reg: buck4 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
ldo1_reg: ldo1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ldo2 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo3_reg: ldo3 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: ldo4 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo5_reg: ldo5 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo6_reg: ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo7_reg: ldo7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo8_reg: ldo8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo9_reg: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo10_reg: ldo10 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
regulator-always-on;
};
};
};
};
audmux@63fd0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
ethernet@63fec000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
};
gpio-keys {
compatible = "gpio-keys";
......@@ -276,3 +82,189 @@ sound {
mux-ext-port = <5>;
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
status = "okay";
};
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
};
&esdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
>;
};
led_pin_gpio7_7: led_gpio7_7@0 {
fsl,pins = <
873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p2v>;
VDDIO-supply = <&reg_3p2v>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
compatible = "fsl,mma8450";
reg = <0x1c>;
};
pmic: dialog@48 {
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
interrupt-parent = <&gpio7>;
interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
regulators {
buck1_reg: buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
regulator-always-on;
};
buck2_reg: buck2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
regulator-always-on;
};
buck3_reg: buck3 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
buck4_reg: buck4 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
ldo1_reg: ldo1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ldo2 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo3_reg: ldo3 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: ldo4 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo5_reg: ldo5 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo6_reg: ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo7_reg: ldo7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo8_reg: ldo8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo9_reg: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo10_reg: ldo10 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
regulator-always-on;
};
};
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
......@@ -21,157 +21,6 @@ memory {
reg = <0x70000000 0x40000000>;
};
soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
};
esdhc@50008000 { /* ESDHC2 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2_1>;
non-removable;
status = "okay";
};
uart3: serial@5000c000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
zigbee: mc1323@0 {
compatible = "fsl,mc1323";
spi-max-frequency = <8000000>;
reg = <0>;
};
flash: m25p32@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "st,m25p";
spi-max-frequency = <20000000>;
reg = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0x3c0000>;
};
};
};
esdhc@50020000 { /* ESDHC3 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3_1>;
non-removable;
status = "okay";
};
};
iomuxc@53fa8000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
>;
};
};
};
uart1: serial@53fbc000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
uart2: serial@53fc0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
i2c@63fc4000 { /* I2C2 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
};
magnetometer: mag3110@0e {
compatible = "fsl,mag3110";
reg = <0x0e>;
};
touchkey: mpr121@5a {
compatible = "fsl,mpr121";
reg = <0x5a>;
};
};
i2c@63fc8000 { /* I2C1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
compatible = "fsl,mma8450";
reg = <0x1c>;
};
camera: ov5642@3c {
compatible = "ovti,ov5642";
reg = <0x3c>;
};
pmic: dialog@48 {
compatible = "dialog,da9053", "dialog,da9052";
reg = <0x48>;
};
};
ethernet@63fec000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
};
gpio-keys {
compatible = "gpio-keys";
......@@ -188,3 +37,146 @@ volume-down {
};
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2_1>;
non-removable;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
zigbee: mc1323@0 {
compatible = "fsl,mc1323";
spi-max-frequency = <8000000>;
reg = <0>;
};
flash: m25p32@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "st,m25p";
spi-max-frequency = <20000000>;
reg = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0x3c0000>;
};
};
};
&esdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3_1>;
non-removable;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
};
magnetometer: mag3110@0e {
compatible = "fsl,mag3110";
reg = <0x0e>;
};
touchkey: mpr121@5a {
compatible = "fsl,mpr121";
reg = <0x5a>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
compatible = "fsl,mma8450";
reg = <0x1c>;
};
camera: ov5642@3c {
compatible = "ovti,ov5642";
reg = <0x3c>;
};
pmic: dialog@48 {
compatible = "dialog,da9053", "dialog,da9052";
reg = <0x48>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
......@@ -21,71 +21,6 @@ memory {
reg = <0x10000000 0x80000000>;
};
soc {
gpmi-nand@00112000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_1>;
status = "disabled"; /* gpmi nand conflicts with SD */
};
aips-bus@02000000 { /* AIPS1 */
iomuxc@020e0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
>;
};
};
arm2 {
pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
fsl,pins = <
1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
>;
};
};
};
};
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_2>;
phy-mode = "rgmii";
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
vmmc-supply = <&reg_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_1
&pinctrl_usdhc3_arm2>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
non-removable;
vmmc-supply = <&reg_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4_1>;
status = "okay";
};
uart4: serial@021f0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_1>;
status = "okay";
};
};
};
regulators {
compatible = "simple-bus";
......@@ -108,3 +43,62 @@ debug-led {
};
};
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_1>;
status = "disabled"; /* gpmi nand conflicts with SD */
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
>;
};
};
arm2 {
pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
fsl,pins = <
1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_2>;
phy-mode = "rgmii";
status = "okay";
};
&usdhc3 {
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
vmmc-supply = <&reg_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_1
&pinctrl_usdhc3_arm2>;
status = "okay";
};
&usdhc4 {
non-removable;
vmmc-supply = <&reg_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4_1>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_1>;
status = "okay";
};
......@@ -20,45 +20,39 @@ / {
memory {
reg = <0x10000000 0x80000000>;
};
};
soc {
aips-bus@02000000 { /* AIPS1 */
iomuxc@020e0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
>;
};
};
};
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
>;
};
};
};
aips-bus@02100000 { /* AIPS2 */
uart4: serial@021f0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_1>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_1>;
status = "okay";
};
ethernet@02188000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_2>;
phy-mode = "rgmii";
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_2>;
phy-mode = "rgmii";
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_1>;
cd-gpios = <&gpio6 15 0>;
wp-gpios = <&gpio1 13 0>;
status = "okay";
};
};
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_1>;
cd-gpios = <&gpio6 15 0>;
wp-gpios = <&gpio1 13 0>;
status = "okay";
};
......@@ -21,118 +21,6 @@ memory {
reg = <0x10000000 0x40000000>;
};
soc {
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
ecspi@02008000 { /* eCSPI1 */
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
status = "okay";
flash: m25p80@0 {
compatible = "sst,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
ssi1: ssi@02028000 {
fsl,mode = "i2s-slave";
status = "okay";
};
};
iomuxc@020e0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
>;
};
};
};
};
aips-bus@02100000 { /* AIPS2 */
usb@02184000 { /* USB OTG */
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
usb@02184200 { /* USB1 */
status = "okay";
};
ethernet@02188000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4_2>;
cd-gpios = <&gpio2 6 0>;
wp-gpios = <&gpio2 7 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
audmux@021d8000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
};
uart2: serial@021e8000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_1>;
};
i2c@021a0000 { /* I2C1 */
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};
};
};
};
regulators {
compatible = "simple-bus";
......@@ -176,3 +64,107 @@ sound {
mux-ext-port = <4>;
};
};
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
status = "okay";
flash: m25p80@0 {
compatible = "sst,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
>;
};
};
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4_2>;
cd-gpios = <&gpio2 6 0>;
wp-gpios = <&gpio2 7 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
&audmux {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
};
&uart2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_1>;
};
&i2c1 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};
};
......@@ -21,61 +21,6 @@ memory {
reg = <0x10000000 0x40000000>;
};
soc {
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
uart1: serial@02020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
iomuxc@020e0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
>;
};
};
};
};
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
status = "okay";
};
usdhc@02194000 { /* uSDHC2 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_1>;
cd-gpios = <&gpio2 2 0>;
wp-gpios = <&gpio2 3 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_1>;
cd-gpios = <&gpio2 0 0>;
wp-gpios = <&gpio2 1 0>;
status = "okay";
};
};
};
gpio-keys {
compatible = "gpio-keys";
......@@ -92,3 +37,50 @@ volume-down {
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_1>;
cd-gpios = <&gpio2 2 0>;
wp-gpios = <&gpio2 3 0>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_1>;
cd-gpios = <&gpio2 0 0>;
wp-gpios = <&gpio2 1 0>;
status = "okay";
};
......@@ -108,7 +108,7 @@ dma-apbh@00110000 {
clocks = <&clks 106>;
};
nfc: gpmi-nand@00112000 {
gpmi: gpmi-nand@00112000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment