viafb: add engine clock support

This patch adds support for enabling and configuring the engine on
VIAs IGPs. This is the main clock used for everything but pixel
output.
Signed-off-by: default avatarFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
parent b692a63a
......@@ -2289,6 +2289,7 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
get_sync(viafbinfo1));
}
clock.set_engine_pll_state(VIA_STATE_ON);
clock.set_primary_clock_source(VIA_CLKSRC_X1, true);
clock.set_secondary_clock_source(VIA_CLKSRC_X1, true);
......
......@@ -87,6 +87,15 @@ static inline void k800_set_secondary_pll_encoded(u32 data)
via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
}
static inline void set_engine_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x01, 0x01); /* enable reset */
via_write_reg(VIASR, 0x47, data & 0xFF);
via_write_reg(VIASR, 0x48, (data >> 8) & 0xFF);
via_write_reg(VIASR, 0x49, (data >> 16) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x01); /* disable reset */
}
static void cle266_set_primary_pll(struct via_pll_config config)
{
cle266_set_primary_pll_encoded(cle266_encode_pll(config));
......@@ -117,6 +126,16 @@ static void vx855_set_secondary_pll(struct via_pll_config config)
k800_set_secondary_pll_encoded(vx855_encode_pll(config));
}
static void k800_set_engine_pll(struct via_pll_config config)
{
set_engine_pll_encoded(k800_encode_pll(config));
}
static void vx855_set_engine_pll(struct via_pll_config config)
{
set_engine_pll_encoded(vx855_encode_pll(config));
}
static void set_primary_pll_state(u8 state)
{
u8 value;
......@@ -153,6 +172,24 @@ static void set_secondary_pll_state(u8 state)
via_write_reg_mask(VIASR, 0x2D, value, 0x0C);
}
static void set_engine_pll_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x02;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x2D, value, 0x03);
}
static void set_primary_clock_state(u8 state)
{
u8 value;
......@@ -247,6 +284,11 @@ static void dummy_set_pll_state(u8 state)
printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap);
}
static void dummy_set_pll(struct via_pll_config config)
{
printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap);
}
void via_clock_init(struct via_clock *clock, int gfx_chip)
{
switch (gfx_chip) {
......@@ -261,6 +303,9 @@ void via_clock_init(struct via_clock *clock, int gfx_chip)
clock->set_secondary_clock_source = dummy_set_clock_source;
clock->set_secondary_pll_state = dummy_set_pll_state;
clock->set_secondary_pll = cle266_set_secondary_pll;
clock->set_engine_pll_state = dummy_set_pll_state;
clock->set_engine_pll = dummy_set_pll;
break;
case UNICHROME_K800:
case UNICHROME_PM800:
......@@ -280,6 +325,9 @@ void via_clock_init(struct via_clock *clock, int gfx_chip)
clock->set_secondary_clock_source = set_secondary_clock_source;
clock->set_secondary_pll_state = set_secondary_pll_state;
clock->set_secondary_pll = k800_set_secondary_pll;
clock->set_engine_pll_state = set_engine_pll_state;
clock->set_engine_pll = k800_set_engine_pll;
break;
case UNICHROME_VX855:
case UNICHROME_VX900:
......@@ -292,6 +340,9 @@ void via_clock_init(struct via_clock *clock, int gfx_chip)
clock->set_secondary_clock_source = set_secondary_clock_source;
clock->set_secondary_pll_state = set_secondary_pll_state;
clock->set_secondary_pll = vx855_set_secondary_pll;
clock->set_engine_pll_state = set_engine_pll_state;
clock->set_engine_pll = vx855_set_engine_pll;
break;
}
......
......@@ -53,6 +53,9 @@ struct via_clock {
void (*set_secondary_clock_source)(enum via_clksrc src, bool use_pll);
void (*set_secondary_pll_state)(u8 state);
void (*set_secondary_pll)(struct via_pll_config config);
void (*set_engine_pll_state)(u8 state);
void (*set_engine_pll)(struct via_pll_config config);
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment