Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  async_tx: fix asynchronous raid6 recovery for ddf layouts
  async_pq: rename scribble page
  async_pq: kill a stray dma_map() call and other cleanups
  md/raid6: kill a gcc-4.0.1 'uninitialized variable' warning
  raid6/async_tx: handle holes in block list in async_syndrome_val
  md/async: don't pass a memory pointer as a page pointer.
  md: Fix handling of raid5 array which is being reshaped to fewer devices.
  md: fix problems with RAID6 calculations for DDF.
  md/raid456: downlevel multicore operations to raid_run_ops
  md: drivers/md/unroll.pl replaced with awk analog
  md: remove clumsy usage of do_sync_mapping_range from bitmap code
  md: raid1/raid10: handle allocation errors during array setup.
  md/raid5: initialize conf->device_lock earlier
  md/raid1/raid10: add a cond_resched
  Revert "md: do not progress the resync process if the stripe was blocked"

crypto/async_tx/async_pq.c

@@ -26,14 +26,10 @@
 #include <linux/async_tx.h>
 
 /**
- * scribble - space to hold throwaway P buffer for synchronous gen_syndrome
+ * pq_scribble_page - space to hold throwaway P or Q buffer for
+ * synchronous gen_syndrome
  */
-static struct page *scribble;
-
-static bool is_raid6_zero_block(struct page *p)
-{
-	return p == (void *) raid6_empty_zero_page;
-}
+static struct page *pq_scribble_page;
 
 /* the struct page *blocks[] parameter passed to async_gen_syndrome()
  * and async_syndrome_val() contains the 'P' destination address at
@@ -83,7 +79,7 @@ do_async_gen_syndrome(struct dma_chan *chan, struct page **blocks,
 	 * sources and update the coefficients accordingly
 	 */
 	for (i = 0, idx = 0; i < src_cnt; i++) {
-		if (is_raid6_zero_block(blocks[i]))
+		if (blocks[i] == NULL)
 			continue;
 		dma_src[idx] = dma_map_page(dma->dev, blocks[i], offset, len,
 					    DMA_TO_DEVICE);
@@ -160,9 +156,9 @@ do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
 		srcs = (void **) blocks;
 
 	for (i = 0; i < disks; i++) {
-		if (is_raid6_zero_block(blocks[i])) {
+		if (blocks[i] == NULL) {
 			BUG_ON(i > disks - 3); /* P or Q can't be zero */
-			srcs[i] = blocks[i];
+			srcs[i] = (void*)raid6_empty_zero_page;
 		} else
 			srcs[i] = page_address(blocks[i]) + offset;
 	}
@@ -186,10 +182,14 @@ do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
  * blocks[disks-1] to NULL.  When P or Q is omitted 'len' must be <=
  * PAGE_SIZE as a temporary buffer of this size is used in the
  * synchronous path.  'disks' always accounts for both destination
- * buffers.
+ * buffers.  If any source buffers (blocks[i] where i < disks - 2) are
+ * set to NULL those buffers will be replaced with the raid6_zero_page
+ * in the synchronous path and omitted in the hardware-asynchronous
+ * path.
  *
  * 'blocks' note: if submit->scribble is NULL then the contents of
- * 'blocks' may be overridden
+ * 'blocks' may be overwritten to perform address conversions
+ * (dma_map_page() or page_address()).
  */
 struct dma_async_tx_descriptor *
 async_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
@@ -227,11 +227,11 @@ async_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
 	async_tx_quiesce(&submit->depend_tx);
 
 	if (!P(blocks, disks)) {
-		P(blocks, disks) = scribble;
+		P(blocks, disks) = pq_scribble_page;
 		BUG_ON(len + offset > PAGE_SIZE);
 	}
 	if (!Q(blocks, disks)) {
-		Q(blocks, disks) = scribble;
+		Q(blocks, disks) = pq_scribble_page;
 		BUG_ON(len + offset > PAGE_SIZE);
 	}
 	do_sync_gen_syndrome(blocks, offset, disks, len, submit);
@@ -265,8 +265,10 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks,
 						      len);
 	struct dma_device *device = chan ? chan->device : NULL;
 	struct dma_async_tx_descriptor *tx;
+	unsigned char coefs[disks-2];
 	enum dma_ctrl_flags dma_flags = submit->cb_fn ? DMA_PREP_INTERRUPT : 0;
 	dma_addr_t *dma_src = NULL;
+	int src_cnt = 0;
 
 	BUG_ON(disks < 4);
 
@@ -285,22 +287,32 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks,
 			 __func__, disks, len);
 		if (!P(blocks, disks))
 			dma_flags |= DMA_PREP_PQ_DISABLE_P;
+		else
+			pq[0] = dma_map_page(dev, P(blocks, disks),
+					     offset, len,
+					     DMA_TO_DEVICE);
 		if (!Q(blocks, disks))
 			dma_flags |= DMA_PREP_PQ_DISABLE_Q;
+		else
+			pq[1] = dma_map_page(dev, Q(blocks, disks),
+					     offset, len,
+					     DMA_TO_DEVICE);
+
 		if (submit->flags & ASYNC_TX_FENCE)
 			dma_flags |= DMA_PREP_FENCE;
-		for (i = 0; i < disks; i++)
+		for (i = 0; i < disks-2; i++)
 			if (likely(blocks[i])) {
-				BUG_ON(is_raid6_zero_block(blocks[i]));
-				dma_src[i] = dma_map_page(dev, blocks[i],
+				dma_src[src_cnt] = dma_map_page(dev, blocks[i],
 								offset, len,
 								DMA_TO_DEVICE);
+				coefs[src_cnt] = raid6_gfexp[i];
+				src_cnt++;
 			}
 
 		for (;;) {
 			tx = device->device_prep_dma_pq_val(chan, pq, dma_src,
-							    disks - 2,
-							    raid6_gfexp,
+							    src_cnt,
+							    coefs,
 							    len, pqres,
 							    dma_flags);
 			if (likely(tx))
@@ -373,9 +385,9 @@ EXPORT_SYMBOL_GPL(async_syndrome_val);
 
 static int __init async_pq_init(void)
 {
-	scribble = alloc_page(GFP_KERNEL);
+	pq_scribble_page = alloc_page(GFP_KERNEL);
 
-	if (scribble)
+	if (pq_scribble_page)
 		return 0;
 
 	pr_err("%s: failed to allocate required spare page\n", __func__);
@@ -385,7 +397,7 @@ static int __init async_pq_init(void)
 
 static void __exit async_pq_exit(void)
 {
-	put_page(scribble);
+	put_page(pq_scribble_page);
 }
 
 module_init(async_pq_init);

crypto/async_tx/async_raid6_recov.c

@@ -131,8 +131,8 @@ async_mult(struct page *dest, struct page *src, u8 coef, size_t len,
 }
 
 static struct dma_async_tx_descriptor *
-__2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks,
-	      struct async_submit_ctl *submit)
+__2data_recov_4(int disks, size_t bytes, int faila, int failb,
+		struct page **blocks, struct async_submit_ctl *submit)
 {
 	struct dma_async_tx_descriptor *tx = NULL;
 	struct page *p, *q, *a, *b;
@@ -143,8 +143,8 @@ __2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks,
 	void *cb_param = submit->cb_param;
 	void *scribble = submit->scribble;
 
-	p = blocks[4-2];
-	q = blocks[4-1];
+	p = blocks[disks-2];
+	q = blocks[disks-1];
 
 	a = blocks[faila];
 	b = blocks[failb];
@@ -170,8 +170,8 @@ __2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks,
 }
 
 static struct dma_async_tx_descriptor *
-__2data_recov_5(size_t bytes, int faila, int failb, struct page **blocks,
-	      struct async_submit_ctl *submit)
+__2data_recov_5(int disks, size_t bytes, int faila, int failb,
+		struct page **blocks, struct async_submit_ctl *submit)
 {
 	struct dma_async_tx_descriptor *tx = NULL;
 	struct page *p, *q, *g, *dp, *dq;
@@ -181,21 +181,22 @@ __2data_recov_5(size_t bytes, int faila, int failb, struct page **blocks,
 	dma_async_tx_callback cb_fn = submit->cb_fn;
 	void *cb_param = submit->cb_param;
 	void *scribble = submit->scribble;
-	int uninitialized_var(good);
-	int i;
+	int good_srcs, good, i;
 
-	for (i = 0; i < 3; i++) {
+	good_srcs = 0;
+	good = -1;
+	for (i = 0; i < disks-2; i++) {
+		if (blocks[i] == NULL)
+			continue;
 		if (i == faila || i == failb)
 			continue;
-		else {
 		good = i;
-			break;
-		}
+		good_srcs++;
 	}
-	BUG_ON(i >= 3);
+	BUG_ON(good_srcs > 1);
 
-	p = blocks[5-2];
-	q = blocks[5-1];
+	p = blocks[disks-2];
+	q = blocks[disks-1];
 	g = blocks[good];
 
 	/* Compute syndrome with zero for the missing data pages
@@ -263,10 +264,10 @@ __2data_recov_n(int disks, size_t bytes, int faila, int failb,
 	 * delta p and delta q
 	 */
 	dp = blocks[faila];
-	blocks[faila] = (void *)raid6_empty_zero_page;
+	blocks[faila] = NULL;
 	blocks[disks-2] = dp;
 	dq = blocks[failb];
-	blocks[failb] = (void *)raid6_empty_zero_page;
+	blocks[failb] = NULL;
 	blocks[disks-1] = dq;
 
 	init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
@@ -323,6 +324,8 @@ struct dma_async_tx_descriptor *
 async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
 			struct page **blocks, struct async_submit_ctl *submit)
 {
+	int non_zero_srcs, i;
+
 	BUG_ON(faila == failb);
 	if (failb < faila)
 		swap(faila, failb);
@@ -334,10 +337,12 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
 	 */
 	if (!submit->scribble) {
 		void **ptrs = (void **) blocks;
-		int i;
 
 		async_tx_quiesce(&submit->depend_tx);
 		for (i = 0; i < disks; i++)
+			if (blocks[i] == NULL)
+				ptrs[i] = (void *) raid6_empty_zero_page;
+			else
 				ptrs[i] = page_address(blocks[i]);
 
 		raid6_2data_recov(disks, bytes, faila, failb, ptrs);
@@ -347,19 +352,30 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
 		return NULL;
 	}
 
-	switch (disks) {
-	case 4:
+	non_zero_srcs = 0;
+	for (i = 0; i < disks-2 && non_zero_srcs < 4; i++)
+		if (blocks[i])
+			non_zero_srcs++;
+	switch (non_zero_srcs) {
+	case 0:
+	case 1:
+		/* There must be at least 2 sources - the failed devices. */
+		BUG();
+
+	case 2:
 		/* dma devices do not uniformly understand a zero source pq
 		 * operation (in contrast to the synchronous case), so
-		 * explicitly handle the 4 disk special case
+		 * explicitly handle the special case of a 4 disk array with
+		 * both data disks missing.
 		 */
-		return __2data_recov_4(bytes, faila, failb, blocks, submit);
-	case 5:
+		return __2data_recov_4(disks, bytes, faila, failb, blocks, submit);
+	case 3:
 		/* dma devices do not uniformly understand a single
 		 * source pq operation (in contrast to the synchronous
-		 * case), so explicitly handle the 5 disk special case
+		 * case), so explicitly handle the special case of a 5 disk
+		 * array with 2 of 3 data disks missing.
 		 */
-		return __2data_recov_5(bytes, faila, failb, blocks, submit);
+		return __2data_recov_5(disks, bytes, faila, failb, blocks, submit);
 	default:
 		return __2data_recov_n(disks, bytes, faila, failb, blocks, submit);
 	}
@@ -385,6 +401,7 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila,
 	dma_async_tx_callback cb_fn = submit->cb_fn;
 	void *cb_param = submit->cb_param;
 	void *scribble = submit->scribble;
+	int good_srcs, good, i;
 	struct page *srcs[2];
 
 	pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
@@ -394,10 +411,12 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila,
 	 */
 	if (!scribble) {
 		void **ptrs = (void **) blocks;
-		int i;
 
 		async_tx_quiesce(&submit->depend_tx);
 		for (i = 0; i < disks; i++)
+			if (blocks[i] == NULL)
+				ptrs[i] = (void*)raid6_empty_zero_page;
+			else
 				ptrs[i] = page_address(blocks[i]);
 
 		raid6_datap_recov(disks, bytes, faila, ptrs);
@@ -407,6 +426,20 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila,
 		return NULL;
 	}
 
+	good_srcs = 0;
+	good = -1;
+	for (i = 0; i < disks-2; i++) {
+		if (i == faila)
+			continue;
+		if (blocks[i]) {
+			good = i;
+			good_srcs++;
+			if (good_srcs > 1)
+				break;
+		}
+	}
+	BUG_ON(good_srcs == 0);
+
 	p = blocks[disks-2];
 	q = blocks[disks-1];
 
@@ -414,14 +447,13 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila,
 	 * Use the dead data page as temporary storage for delta q
 	 */
 	dq = blocks[faila];
-	blocks[faila] = (void *)raid6_empty_zero_page;
+	blocks[faila] = NULL;
 	blocks[disks-1] = dq;
 
-	/* in the 4 disk case we only need to perform a single source
-	 * multiplication
+	/* in the 4-disk case we only need to perform a single source
+	 * multiplication with the one good data block.
 	 */
-	if (disks == 4) {
-		int good = faila == 0 ? 1 : 0;
+	if (good_srcs == 1) {
 		struct page *g = blocks[good];
 
 		init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL,

crypto/async_tx/async_xor.c

@@ -44,20 +44,23 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
 	void *cb_param_orig = submit->cb_param;
 	enum async_tx_flags flags_orig = submit->flags;
 	enum dma_ctrl_flags dma_flags;
-	int xor_src_cnt;
+	int xor_src_cnt = 0;
 	dma_addr_t dma_dest;
 
 	/* map the dest bidrectional in case it is re-used as a source */
 	dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL);
 	for (i = 0; i < src_cnt; i++) {
 		/* only map the dest once */
+		if (!src_list[i])
+			continue;
 		if (unlikely(src_list[i] == dest)) {
-			dma_src[i] = dma_dest;
+			dma_src[xor_src_cnt++] = dma_dest;
 			continue;
 		}
-		dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
+		dma_src[xor_src_cnt++] = dma_map_page(dma->dev, src_list[i], offset,
 						      len, DMA_TO_DEVICE);
 	}
+	src_cnt = xor_src_cnt;
 
 	while (src_cnt) {
 		submit->flags = flags_orig;
@@ -123,7 +126,7 @@ do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset,
 	    int src_cnt, size_t len, struct async_submit_ctl *submit)
 {
 	int i;
-	int xor_src_cnt;
+	int xor_src_cnt = 0;
 	int src_off = 0;
 	void *dest_buf;
 	void **srcs;
@@ -135,8 +138,9 @@ do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset,
 
 	/* convert to buffer pointers */
 	for (i = 0; i < src_cnt; i++)
-		srcs[i] = page_address(src_list[i]) + offset;
-
+		if (src_list[i])
+			srcs[xor_src_cnt++] = page_address(src_list[i]) + offset;
+	src_cnt = xor_src_cnt;
 	/* set destination address */
 	dest_buf = page_address(dest) + offset;
 

drivers/md/Makefile

@@ -46,7 +46,7 @@ obj-$(CONFIG_DM_LOG_USERSPACE)	+= dm-log-userspace.o
 obj-$(CONFIG_DM_ZERO)		+= dm-zero.o
 
 quiet_cmd_unroll = UNROLL  $@
-      cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \
+      cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
                    < $< > $@ || ( rm -f $@ && exit 1 )
 
 ifeq ($(CONFIG_ALTIVEC),y)
@@ -59,56 +59,56 @@ endif
 
 targets += raid6int1.c
 $(obj)/raid6int1.c:   UNROLL := 1
-$(obj)/raid6int1.c:   $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int1.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 targets += raid6int2.c
 $(obj)/raid6int2.c:   UNROLL := 2
-$(obj)/raid6int2.c:   $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int2.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 targets += raid6int4.c
 $(obj)/raid6int4.c:   UNROLL := 4
-$(obj)/raid6int4.c:   $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int4.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 targets += raid6int8.c
 $(obj)/raid6int8.c:   UNROLL := 8
-$(obj)/raid6int8.c:   $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int8.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 targets += raid6int16.c
 $(obj)/raid6int16.c:  UNROLL := 16
-$(obj)/raid6int16.c:  $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int16.c:  $(src)/raid6int.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 targets += raid6int32.c
 $(obj)/raid6int32.c:  UNROLL := 32
-$(obj)/raid6int32.c:  $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int32.c:  $(src)/raid6int.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 CFLAGS_raid6altivec1.o += $(altivec_flags)
 targets += raid6altivec1.c
 $(obj)/raid6altivec1.c:   UNROLL := 1
-$(obj)/raid6altivec1.c:   $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+$(obj)/raid6altivec1.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 CFLAGS_raid6altivec2.o += $(altivec_flags)
 targets += raid6altivec2.c
 $(obj)/raid6altivec2.c:   UNROLL := 2
-$(obj)/raid6altivec2.c:   $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+$(obj)/raid6altivec2.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 CFLAGS_raid6altivec4.o += $(altivec_flags)
 targets += raid6altivec4.c
 $(obj)/raid6altivec4.c:   UNROLL := 4
-$(obj)/raid6altivec4.c:   $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+$(obj)/raid6altivec4.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 CFLAGS_raid6altivec8.o += $(altivec_flags)
 targets += raid6altivec8.c
 $(obj)/raid6altivec8.c:   UNROLL := 8
-$(obj)/raid6altivec8.c:   $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+$(obj)/raid6altivec8.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
 	$(call if_changed,unroll)
 
 quiet_cmd_mktable = TABLE   $@

drivers/md/bitmap.c

@@ -1624,10 +1624,11 @@ int bitmap_create(mddev_t *mddev)
 	bitmap->offset = mddev->bitmap_offset;
 	if (file) {
 		get_file(file);
-		do_sync_mapping_range(file->f_mapping, 0, LLONG_MAX,
-				      SYNC_FILE_RANGE_WAIT_BEFORE |
-				      SYNC_FILE_RANGE_WRITE |
-				      SYNC_FILE_RANGE_WAIT_AFTER);
+		/* As future accesses to this file will use bmap,
+		 * and bypass the page cache, we must sync the file
+		 * first.
+		 */
+		vfs_fsync(file, file->f_dentry, 1);
 	}
 	/* read superblock from bitmap file (this sets bitmap->chunksize) */
 	err = bitmap_read_sb(bitmap);

drivers/md/md.c

@@ -2631,7 +2631,7 @@ static void analyze_sbs(mddev_t * mddev)
 			rdev->desc_nr = i++;
 			rdev->raid_disk = rdev->desc_nr;
 			set_bit(In_sync, &rdev->flags);
-		} else if (rdev->raid_disk >= mddev->raid_disks) {
+		} else if (rdev->raid_disk >= (mddev->raid_disks - min(0, mddev->delta_disks))) {
 			rdev->raid_disk = -1;
 			clear_bit(In_sync, &rdev->flags);
 		}

drivers/md/raid1.c

@@ -64,7 +64,7 @@ static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data)
 
 	/* allocate a r1bio with room for raid_disks entries in the bios array */
 	r1_bio = kzalloc(size, gfp_flags);
-	if (!r1_bio)
+	if (!r1_bio && pi->mddev)
 		unplug_slaves(pi->mddev);
 
 	return r1_bio;
@@ -1683,6 +1683,7 @@ static void raid1d(mddev_t *mddev)
 				generic_make_request(bio);
 			}
 		}
+		cond_resched();
 	}
 	if (unplug)
 		unplug_slaves(mddev);
@@ -1978,13 +1979,14 @@ static int run(mddev_t *mddev)
 	conf->poolinfo = kmalloc(sizeof(*conf->poolinfo), GFP_KERNEL);
 	if (!conf->poolinfo)
 		goto out_no_mem;
-	conf->poolinfo->mddev = mddev;
+	conf->poolinfo->mddev = NULL;
 	conf->poolinfo->raid_disks = mddev->raid_disks;
 	conf->r1bio_pool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc,
 					  r1bio_pool_free,
 					  conf->poolinfo);
 	if (!conf->r1bio_pool)
 		goto out_no_mem;
+	conf->poolinfo->mddev = mddev;
 
 	spin_lock_init(&conf->device_lock);
 	mddev->queue->queue_lock = &conf->device_lock;

drivers/md/raid10.c

@@ -68,7 +68,7 @@ static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data)
 
 	/* allocate a r10bio with room for raid_disks entries in the bios array */
 	r10_bio = kzalloc(size, gfp_flags);
-	if (!r10_bio)
+	if (!r10_bio && conf->mddev)
 		unplug_slaves(conf->mddev);
 
 	return r10_bio;
@@ -1632,6 +1632,7 @@ static void raid10d(mddev_t *mddev)
 				generic_make_request(bio);
 			}
 		}
+		cond_resched();
 	}
 	if (unplug)
 		unplug_slaves(mddev);
@@ -2095,7 +2096,6 @@ static int run(mddev_t *mddev)
 	if (!conf->tmppage)
 		goto out_free_conf;
 
-	conf->mddev = mddev;
 	conf->raid_disks = mddev->raid_disks;
 	conf->near_copies = nc;
 	conf->far_copies = fc;
@@ -2132,6 +2132,7 @@ static int run(mddev_t *mddev)
 		goto out_free_conf;
 	}
 
+	conf->mddev = mddev;
 	spin_lock_init(&conf->device_lock);
 	mddev->queue->queue_lock = &conf->device_lock;
 

drivers/md/raid5.h

@@ -214,12 +214,20 @@ struct stripe_head {
 	int			disks;		/* disks in stripe */
 	enum check_states	check_state;
 	enum reconstruct_states reconstruct_state;
-	/* stripe_operations
+	/**
+	 * struct stripe_operations
 	 * @target - STRIPE_OP_COMPUTE_BLK target
+	 * @target2 - 2nd compute target in the raid6 case
+	 * @zero_sum_result - P and Q verification flags
+	 * @request - async service request flags for raid_run_ops
 	 */
 	struct stripe_operations {
 		int 		     target, target2;
 		enum sum_check_flags zero_sum_result;
+		#ifdef CONFIG_MULTICORE_RAID456
+		unsigned long	     request;
+		wait_queue_head_t    wait_for_ops;
+		#endif
 	} ops;
 	struct r5dev {
 		struct bio	req;
@@ -294,6 +302,8 @@ struct r6_state {
 #define	STRIPE_FULL_WRITE	13 /* all blocks are set to be overwritten */
 #define	STRIPE_BIOFILL_RUN	14
 #define	STRIPE_COMPUTE_RUN	15
+#define	STRIPE_OPS_REQ_PENDING	16
+
 /*
  * Operation request flags
  */
@@ -478,7 +488,7 @@ static inline int algorithm_valid_raid6(int layout)
 {
 	return (layout >= 0 && layout <= 5)
 		||
-		(layout == 8 || layout == 10)
+		(layout >= 8 && layout <= 10)
 		||
 		(layout >= 16 && layout <= 20);
 }

drivers/md/raid6altivec.uc

@@ -15,7 +15,7 @@
  *
  * $#-way unrolled portable integer math RAID-6 instruction set
  *
- * This file is postprocessed using unroll.pl
+ * This file is postprocessed using unroll.awk
  *
  * <benh> hpa: in process,
  * you can just "steal" the vec unit with enable_kernel_altivec() (but

drivers/md/raid6int.uc

@@ -15,7 +15,7 @@
  *
  * $#-way unrolled portable integer math RAID-6 instruction set
  *
- * This file is postprocessed using unroll.pl
+ * This file is postprocessed using unroll.awk
  */
 
 #include <linux/raid/pq.h>

drivers/md/raid6test/Makefile

@@ -7,7 +7,7 @@ CC	 = gcc
 OPTFLAGS = -O2			# Adjust as desired
 CFLAGS	 = -I.. -I ../../../include -g $(OPTFLAGS)
 LD	 = ld
-PERL	 = perl
+AWK	 = awk
 AR	 = ar
 RANLIB	 = ranlib
 
@@ -35,35 +35,35 @@ raid6.a: raid6int1.o raid6int2.o raid6int4.o raid6int8.o raid6int16.o \
 raid6test: test.c raid6.a
 	$(CC) $(CFLAGS) -o raid6test $^
 
-raid6altivec1.c: raid6altivec.uc ../unroll.pl
-	$(PERL) ../unroll.pl 1 < raid6altivec.uc > $@
+raid6altivec1.c: raid6altivec.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=1 < raid6altivec.uc > $@
 
-raid6altivec2.c: raid6altivec.uc ../unroll.pl
-	$(PERL) ../unroll.pl 2 < raid6altivec.uc > $@
+raid6altivec2.c: raid6altivec.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=2 < raid6altivec.uc > $@
 
-raid6altivec4.c: raid6altivec.uc ../unroll.pl
-	$(PERL) ../unroll.pl 4 < raid6altivec.uc > $@
+raid6altivec4.c: raid6altivec.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=4 < raid6altivec.uc > $@
 
-raid6altivec8.c: raid6altivec.uc ../unroll.pl
-	$(PERL) ../unroll.pl 8 < raid6altivec.uc > $@
+raid6altivec8.c: raid6altivec.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=8 < raid6altivec.uc > $@
 
-raid6int1.c: raid6int.uc ../unroll.pl
-	$(PERL) ../unroll.pl 1 < raid6int.uc > $@
+raid6int1.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=1 < raid6int.uc > $@
 
-raid6int2.c: raid6int.uc ../unroll.pl
-	$(PERL) ../unroll.pl 2 < raid6int.uc > $@
+raid6int2.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=2 < raid6int.uc > $@
 
-raid6int4.c: raid6int.uc ../unroll.pl
-	$(PERL) ../unroll.pl 4 < raid6int.uc > $@
+raid6int4.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=4 < raid6int.uc > $@
 
-raid6int8.c: raid6int.uc ../unroll.pl
-	$(PERL) ../unroll.pl 8 < raid6int.uc > $@
+raid6int8.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=8 < raid6int.uc > $@
 
-raid6int16.c: raid6int.uc ../unroll.pl
-	$(PERL) ../unroll.pl 16 < raid6int.uc > $@
+raid6int16.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=16 < raid6int.uc > $@
 
-raid6int32.c: raid6int.uc ../unroll.pl
-	$(PERL) ../unroll.pl 32 < raid6int.uc > $@
+raid6int32.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=32 < raid6int.uc > $@
 
 raid6tables.c: mktables
 	./mktables > raid6tables.c

drivers/md/unroll.awk

+
+# This filter requires one command line option of form -vN=n
+# where n must be a decimal number.
+#
+# Repeat each input line containing $$ n times, replacing $$ with 0...n-1.
+# Replace each $# with n, and each $* with a single $.
+
+BEGIN {
+	n = N + 0
+}
+{
+	if (/\$\$/) { rep = n } else { rep = 1 }
+	for (i = 0; i < rep; ++i) {
+		tmp = $0
+		gsub(/\$\$/, i, tmp)
+		gsub(/\$\#/, n, tmp)
+		gsub(/\$\*/, "$", tmp)
+		print tmp
+	}
+}

drivers/md/unroll.pl

-#!/usr/bin/perl
-#
-# Take a piece of C code and for each line which contains the sequence $$
-# repeat n times with $ replaced by 0...n-1; the sequence $# is replaced
-# by the unrolling factor, and $* with a single $
-#
-
-($n) = @ARGV;
-$n += 0;
-
-while ( defined($line = <STDIN>) ) {
-    if ( $line =~ /\$\$/ ) {
-	$rep = $n;
-    } else {
-	$rep = 1;
-    }
-    for ( $i = 0 ; $i < $rep ; $i++ ) {
-	$tmp = $line;
-	$tmp =~ s/\$\$/$i/g;
-	$tmp =~ s/\$\#/$n/g;
-	$tmp =~ s/\$\*/\$/g;
-	print $tmp;
-    }
-}