Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/boot/compressed/head.S

@@ -84,7 +84,7 @@
 		kputc	#'\n'
 		kphex	r5, 8		/* decompressed kernel start */
 		kputc	#'-'
-		kphex	r8, 8		/* decompressed kernel end  */
+		kphex	r9, 8		/* decompressed kernel end  */
 		kputc	#'>'
 		kphex	r4, 8		/* kernel execution address */
 		kputc	#'\n'
@@ -116,7 +116,7 @@ start:
 		.word	start			@ absolute load/run zImage address
 		.word	_edata			@ zImage end address
 1:		mov	r7, r1			@ save architecture ID
-		mov	r8, #0			@ save r0
+		mov	r8, r2			@ save atags pointer
 
 #ifndef __ARM_ARCH_2__
 		/*
@@ -144,7 +144,7 @@ not_angel:
 
 		/*
 		 * some architecture specific code can be inserted
-		 * by the linker here, but it should preserve r7 and r8.
+		 * by the linker here, but it should preserve r7, r8, and r9.
 		 */
 
 		.text
@@ -249,16 +249,17 @@ not_relocated:	mov	r0, #0
  * r5     = decompressed kernel start
  * r6     = processor ID
  * r7     = architecture ID
- * r8-r14 = unused
+ * r8     = atags pointer
+ * r9-r14 = corrupted
  */
 		add	r1, r5, r0		@ end of decompressed kernel
 		adr	r2, reloc_start
 		ldr	r3, LC1
 		add	r3, r2, r3
-1:		ldmia	r2!, {r8 - r13}		@ copy relocation code
-		stmia	r1!, {r8 - r13}
-		ldmia	r2!, {r8 - r13}
-		stmia	r1!, {r8 - r13}
+1:		ldmia	r2!, {r9 - r14}		@ copy relocation code
+		stmia	r1!, {r9 - r14}
+		ldmia	r2!, {r9 - r14}
+		stmia	r1!, {r9 - r14}
 		cmp	r2, r3
 		blo	1b
 
@@ -308,11 +309,12 @@ params:		ldr	r0, =params_phys
  *  r4 = kernel execution address
  *  r6 = processor ID
  *  r7 = architecture number
- *  r8 = run-time address of "start"
+ *  r8 = atags pointer
+ *  r9 = run-time address of "start"  (???)
  * On exit,
- *  r1, r2, r3, r8, r9, r12 corrupted
+ *  r1, r2, r3, r9, r10, r12 corrupted
  * This routine must preserve:
- *  r4, r5, r6, r7
+ *  r4, r5, r6, r7, r8
  */
 		.align	5
 cache_on:	mov	r3, #8			@ cache_on function
@@ -326,15 +328,15 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
  * bits for the RAM area only.
  */
 		mov	r0, r3
-		mov	r8, r0, lsr #18
-		mov	r8, r8, lsl #18		@ start of RAM
-		add	r9, r8, #0x10000000	@ a reasonable RAM size
+		mov	r9, r0, lsr #18
+		mov	r9, r9, lsl #18		@ start of RAM
+		add	r10, r9, #0x10000000	@ a reasonable RAM size
 		mov	r1, #0x12
 		orr	r1, r1, #3 << 10
 		add	r2, r3, #16384
 1:		cmp	r1, r8			@ if virt > start of RAM
 		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
-		cmp	r1, r9			@ if virt > end of RAM
+		cmp	r1, r10			@ if virt > end of RAM
 		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
 		str	r1, [r0], #4		@ 1:1 mapping
 		add	r1, r1, #1048576
@@ -403,26 +405,28 @@ __common_cache_on:
  * r5     = decompressed kernel start
  * r6     = processor ID
  * r7     = architecture ID
- * r8-r14 = unused
+ * r8     = atags pointer
+ * r9-r14 = corrupted
  */
 		.align	5
-reloc_start:	add	r8, r5, r0
+reloc_start:	add	r9, r5, r0
 		debug_reloc_start
 		mov	r1, r4
 1:
 		.rept	4
-		ldmia	r5!, {r0, r2, r3, r9 - r13}	@ relocate kernel
-		stmia	r1!, {r0, r2, r3, r9 - r13}
+		ldmia	r5!, {r0, r2, r3, r10 - r14}	@ relocate kernel
+		stmia	r1!, {r0, r2, r3, r10 - r14}
 		.endr
 
-		cmp	r5, r8
+		cmp	r5, r9
 		blo	1b
 		debug_reloc_end
 
 call_kernel:	bl	cache_clean_flush
 		bl	cache_off
-		mov	r0, #0
+		mov	r0, #0			@ must be zero
 		mov	r1, r7			@ restore architecture number
+		mov	r2, r8			@ restore atags pointer
 		mov	pc, r4			@ call kernel
 
 /*

arch/arm/common/rtctime.c

@@ -19,6 +19,7 @@
 #include <linux/spinlock.h>
 #include <linux/capability.h>
 #include <linux/device.h>
+#include <linux/mutex.h>
 
 #include <asm/rtc.h>
 #include <asm/semaphore.h>
@@ -35,7 +36,7 @@ static unsigned long rtc_irq_data;
 /*
  * rtc_sem protects rtc_inuse and rtc_ops
  */
-static DECLARE_MUTEX(rtc_sem);
+static DEFINE_MUTEX(rtc_mutex);
 static unsigned long rtc_inuse;
 static struct rtc_ops *rtc_ops;
 
@@ -356,7 +357,7 @@ static int rtc_open(struct inode *inode, struct file *file)
 {
 	int ret;
 
-	down(&rtc_sem);
+	mutex_lock(&rtc_mutex);
 
 	if (rtc_inuse) {
 		ret = -EBUSY;
@@ -374,7 +375,7 @@ static int rtc_open(struct inode *inode, struct file *file)
 			rtc_inuse = 1;
 		}
 	}
-	up(&rtc_sem);
+	mutex_unlock(&rtc_mutex);
 
 	return ret;
 }
@@ -480,7 +481,7 @@ int register_rtc(struct rtc_ops *ops)
 {
 	int ret = -EBUSY;
 
-	down(&rtc_sem);
+	mutex_lock(&rtc_mutex);
 	if (rtc_ops == NULL) {
 		rtc_ops = ops;
 
@@ -489,7 +490,7 @@ int register_rtc(struct rtc_ops *ops)
 			create_proc_read_entry("driver/rtc", 0, NULL,
 					       rtc_read_proc, ops);
 	}
-	up(&rtc_sem);
+	mutex_unlock(&rtc_mutex);
 
 	return ret;
 }
@@ -497,12 +498,12 @@ EXPORT_SYMBOL(register_rtc);
 
 void unregister_rtc(struct rtc_ops *rtc)
 {
-	down(&rtc_sem);
+	mutex_lock(&rtc_mutex);
 	if (rtc == rtc_ops) {
 		remove_proc_entry("driver/rtc", NULL);
 		misc_deregister(&rtc_miscdev);
 		rtc_ops = NULL;
 	}
-	up(&rtc_sem);
+	mutex_unlock(&rtc_mutex);
 }
 EXPORT_SYMBOL(unregister_rtc);

arch/arm/kernel/ecard.c

@@ -40,6 +40,7 @@
 #include <linux/proc_fs.h>
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
@@ -206,7 +207,7 @@ static void ecard_task_readbytes(struct ecard_request *req)
 
 static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
 static struct ecard_request *ecard_req;
-static DECLARE_MUTEX(ecard_sem);
+static DEFINE_MUTEX(ecard_mutex);
 
 /*
  * Set up the expansion card daemon's page tables.
@@ -299,7 +300,7 @@ static void ecard_call(struct ecard_request *req)
 
 	req->complete = &completion;
 
-	down(&ecard_sem);
+	mutex_lock(&ecard_mutex);
 	ecard_req = req;
 	wake_up(&ecard_wait);
 
@@ -307,7 +308,7 @@ static void ecard_call(struct ecard_request *req)
 	 * Now wait for kecardd to run.
 	 */
 	wait_for_completion(&completion);
-	up(&ecard_sem);
+	mutex_unlock(&ecard_mutex);
 }
 
 /* ======================= Mid-level card control ===================== */

arch/arm/kernel/fiq.c

@@ -101,7 +101,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
 	ldmia	%1, {r8 - r14}\n\
 	msr	cpsr_c, %0	@ return to SVC mode\n\
 	mov	r0, r0\n\
-	ldmea	fp, {fp, sp, pc}"
+	ldmfd	sp, {fp, sp, pc}"
 	: "=&r" (tmp)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }
@@ -119,7 +119,7 @@ void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
 	stmia	%1, {r8 - r14}\n\
 	msr	cpsr_c, %0	@ return to SVC mode\n\
 	mov	r0, r0\n\
-	ldmea	fp, {fp, sp, pc}"
+	ldmfd	sp, {fp, sp, pc}"
 	: "=&r" (tmp)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }

arch/arm/kernel/setup.c

@@ -205,7 +205,7 @@ static const char *proc_arch[] = {
 	"5TE",
 	"5TEJ",
 	"6TEJ",
-	"?(10)",
+	"7",
 	"?(11)",
 	"?(12)",
 	"?(13)",
@@ -258,14 +258,17 @@ int cpu_architecture(void)
 {
 	int cpu_arch;
 
-	if ((processor_id & 0x0000f000) == 0) {
+	if ((processor_id & 0x0008f000) == 0) {
 		cpu_arch = CPU_ARCH_UNKNOWN;
-	} else if ((processor_id & 0x0000f000) == 0x00007000) {
+	} else if ((processor_id & 0x0008f000) == 0x00007000) {
 		cpu_arch = (processor_id & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
-	} else {
+	} else if ((processor_id & 0x00080000) == 0x00000000) {
 		cpu_arch = (processor_id >> 16) & 7;
 		if (cpu_arch)
 			cpu_arch += CPU_ARCH_ARMv3;
+	} else {
+		/* the revised CPUID */
+		cpu_arch = ((processor_id >> 12) & 0xf) - 0xb + CPU_ARCH_ARMv6;
 	}
 
 	return cpu_arch;
@@ -863,11 +866,11 @@ static int c_show(struct seq_file *m, void *v)
 	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", processor_id >> 24);
 	seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]);
 
-	if ((processor_id & 0x0000f000) == 0x00000000) {
+	if ((processor_id & 0x0008f000) == 0x00000000) {
 		/* pre-ARM7 */
 		seq_printf(m, "CPU part\t\t: %07x\n", processor_id >> 4);
 	} else {
-		if ((processor_id & 0x0000f000) == 0x00007000) {
+		if ((processor_id & 0x0008f000) == 0x00007000) {
 			/* ARM7 */
 			seq_printf(m, "CPU variant\t: 0x%02x\n",
 				   (processor_id >> 16) & 127);

arch/arm/lib/csumpartialcopy.S

@@ -18,11 +18,13 @@
  */
 
 		.macro	save_regs
+		mov	ip, sp
 		stmfd	sp!, {r1, r4 - r8, fp, ip, lr, pc}
+		sub	fp, ip, #4
 		.endm
 
-		.macro	load_regs,flags
-		LOADREGS(\flags,fp,{r1, r4 - r8, fp, sp, pc})
+		.macro	load_regs
+		ldmfd	sp, {r1, r4 - r8, fp, sp, pc}
 		.endm
 
 		.macro	load1b, reg1

arch/arm/lib/csumpartialcopygeneric.S

@@ -23,7 +23,7 @@ len	.req	r2
 sum	.req	r3
 
 .Lzero:		mov	r0, sum
-		load_regs	ea
+		load_regs
 
 		/*
 		 * Align an unaligned destination pointer.  We know that
@@ -87,9 +87,7 @@ sum	.req	r3
 		b	.Ldone
 
 FN_ENTRY
-		mov	ip, sp
 		save_regs
-		sub	fp, ip, #4
 
 		cmp	len, #8			@ Ensure that we have at least
 		blo	.Lless8			@ 8 bytes to copy.
@@ -163,7 +161,7 @@ FN_ENTRY
 		ldr	sum, [sp, #0]		@ dst
 		tst	sum, #1
 		movne	r0, r0, ror #8
-		load_regs	ea
+		load_regs
 
 .Lsrc_not_aligned:
 		adc	sum, sum, #0		@ include C from dst alignment

arch/arm/lib/csumpartialcopyuser.S

@@ -18,11 +18,13 @@
 		.text
 
 		.macro	save_regs
+		mov	ip, sp
 		stmfd	sp!, {r1 - r2, r4 - r8, fp, ip, lr, pc}
+		sub	fp, ip, #4
 		.endm
 
-		.macro	load_regs,flags
-		ldm\flags	fp, {r1, r2, r4-r8, fp, sp, pc}
+		.macro	load_regs
+		ldmfd	sp, {r1, r2, r4-r8, fp, sp, pc}
 		.endm
 
 		.macro	load1b,	reg1
@@ -100,5 +102,5 @@
 6002:		teq	r2, r1
 		strneb	r0, [r1], #1
 		bne	6002b
-		load_regs	ea
+		load_regs
 		.previous

arch/arm/mach-aaec2000/clock.c

@@ -16,26 +16,27 @@
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/clk.h>
+#include <linux/mutex.h>
 
 #include <asm/semaphore.h>
 
 #include "clock.h"
 
 static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
 
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
 
-	down(&clocks_sem);
+	mutex_lock(&clocks_mutex);
 	list_for_each_entry(p, &clocks, node) {
 		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
 			clk = p;
 			break;
 		}
 	}
-	up(&clocks_sem);
+	mutex_unlock(&clocks_mutex);
 
 	return clk;
 }
@@ -78,18 +79,18 @@ EXPORT_SYMBOL(clk_set_rate);
 
 int clk_register(struct clk *clk)
 {
-	down(&clocks_sem);
+	mutex_lock(&clocks_mutex);
 	list_add(&clk->node, &clocks);
-	up(&clocks_sem);
+	mutex_unlock(&clocks_mutex);
 	return 0;
 }
 EXPORT_SYMBOL(clk_register);
 
 void clk_unregister(struct clk *clk)
 {
-	down(&clocks_sem);
+	mutex_lock(&clocks_mutex);
 	list_del(&clk->node);
-	up(&clocks_sem);
+	mutex_unlock(&clocks_mutex);
 }
 EXPORT_SYMBOL(clk_unregister);
 

arch/arm/mach-at91rm9200/Makefile

@@ -8,10 +8,10 @@ obj-n		:=
 obj-		:=
 
 # Board-specific support
-#obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
-#obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
-#obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
-#obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
+obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
+obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
+obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
 #obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o
 #obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
 

arch/arm/mach-at91rm9200/board-csb337.c

+/*
+ * linux/arch/arm/mach-at91rm9200/board-csb337.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/mach/serial_at91rm9200.h>
+#include <asm/arch/board.h>
+
+#include "generic.h"
+
+static void __init csb337_init_irq(void)
+{
+	/* Initialize AIC controller */
+	at91rm9200_init_irq(NULL);
+
+	/* Set up the GPIO interrupts */
+	at91_gpio_irq_setup(BGA_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+#define CSB337_UART_MAP		{ 4, 1, -1, -1, -1 }	/* ttyS0, ..., ttyS4 */
+#define CSB337_SERIAL_CONSOLE	0			/* ttyS0 */
+
+static void __init csb337_map_io(void)
+{
+	int serial[AT91_NR_UART] = CSB337_UART_MAP;
+	int i;
+
+	at91rm9200_map_io();
+
+	/* Initialize clocks: 3.6864 MHz crystal */
+	at91_clock_init(3686400);
+
+#ifdef CONFIG_SERIAL_AT91
+	at91_console_port = CSB337_SERIAL_CONSOLE;
+	memcpy(at91_serial_map, serial, sizeof(serial));
+
+	/* Register UARTs */
+	for (i = 0; i < AT91_NR_UART; i++) {
+		if (serial[i] >= 0)
+			at91_register_uart(i, serial[i]);
+	}
+#endif
+}
+
+static struct at91_eth_data __initdata csb337_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC2,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata csb337_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata csb337_udc_data = {
+	// this has no VBUS sensing pin
+	.pullup_pin	= AT91_PIN_PA24,
+};
+
+static struct at91_cf_data __initdata csb337_cf_data = {
+	/*
+	 * connector P4 on the CSB 337 mates to
+	 * connector P8 on the CSB 300CF
+	 */
+
+	/* CSB337 specific */
+	.det_pin	= AT91_PIN_PC3,
+
+	/* CSB300CF specific */
+	.irq_pin	= AT91_PIN_PA19,
+	.vcc_pin	= AT91_PIN_PD0,
+	.rst_pin	= AT91_PIN_PD2,
+};
+
+static struct at91_mmc_data __initdata csb337_mmc_data = {
+	.det_pin	= AT91_PIN_PD5,
+	.is_b		= 0,
+	.wire4		= 1,
+	.wp_pin		= AT91_PIN_PD6,
+};
+
+static void __init csb337_board_init(void)
+{
+	/* Ethernet */
+	at91_add_device_eth(&csb337_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&csb337_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&csb337_udc_data);
+	/* Compact Flash */
+	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
+	at91_add_device_cf(&csb337_cf_data);
+	/* MMC */
+	at91_add_device_mmc(&csb337_mmc_data);
+}
+
+MACHINE_START(CSB337, "Cogent CSB337")
+	/* Maintainer: Bill Gatliff */
+	.phys_ram	= AT91_SDRAM_BASE,
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= csb337_map_io,
+	.init_irq	= csb337_init_irq,
+	.init_machine	= csb337_board_init,
+MACHINE_END

arch/arm/mach-at91rm9200/board-csb637.c

+/*
+ * linux/arch/arm/mach-at91rm9200/board-csb637.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/mach/serial_at91rm9200.h>
+#include <asm/arch/board.h>
+
+#include "generic.h"
+
+static void __init csb637_init_irq(void)
+{
+	/* Initialize AIC controller */
+	at91rm9200_init_irq(NULL);
+
+	/* Set up the GPIO interrupts */
+	at91_gpio_irq_setup(BGA_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+#define CSB637_UART_MAP		{ 4, 1, -1, -1, -1 }	/* ttyS0, ..., ttyS4 */
+#define CSB637_SERIAL_CONSOLE	0			/* ttyS0 */
+
+static void __init csb637_map_io(void)
+{
+	int serial[AT91_NR_UART] = CSB637_UART_MAP;
+	int i;
+
+	at91rm9200_map_io();
+
+	/* Initialize clocks: 3.6864 MHz crystal */
+	at91_clock_init(3686400);
+
+#ifdef CONFIG_SERIAL_AT91
+	at91_console_port = CSB637_SERIAL_CONSOLE;
+	memcpy(at91_serial_map, serial, sizeof(serial));
+
+	/* Register UARTs */
+	for (i = 0; i < AT91_NR_UART; i++) {
+		if (serial[i] >= 0)
+			at91_register_uart(i, serial[i]);
+	}
+#endif
+}
+
+static struct at91_eth_data __initdata csb637_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC0,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata csb637_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata csb637_udc_data = {
+	.vbus_pin     = AT91_PIN_PB28,
+	.pullup_pin   = AT91_PIN_PB1,
+};
+
+static void __init csb637_board_init(void)
+{
+	/* Ethernet */
+	at91_add_device_eth(&csb637_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&csb637_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&csb637_udc_data);
+}
+
+MACHINE_START(CSB637, "Cogent CSB637")
+	/* Maintainer: Bill Gatliff */
+	.phys_ram	= AT91_SDRAM_BASE,
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= csb637_map_io,
+	.init_irq	= csb637_init_irq,
+	.init_machine	= csb637_board_init,
+MACHINE_END

arch/arm/mach-integrator/clock.c

@@ -15,6 +15,7 @@
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/clk.h>
+#include <linux/mutex.h>
 
 #include <asm/semaphore.h>
 #include <asm/hardware/icst525.h>
@@ -22,20 +23,20 @@
 #include "clock.h"
 
 static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
 
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
 
-	down(&clocks_sem);
+	mutex_lock(&clocks_mutex);
 	list_for_each_entry(p, &clocks, node) {
 		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
 			clk = p;
 			break;
 		}
 	}
-	up(&clocks_sem);
+	mutex_unlock(&clocks_mutex);
 
 	return clk;
 }
@@ -107,18 +108,18 @@ static struct clk uart_clk = {
 
 int clk_register(struct clk *clk)
 {
-	down(&clocks_sem);
+	mutex_lock(&clocks_mutex);
 	list_add(&clk->node, &clocks);
-	up(&clocks_sem);
+	mutex_unlock(&clocks_mutex);
 	return 0;
 }
 EXPORT_SYMBOL(clk_register);
 
 void clk_unregister(struct clk *clk)
 {
-	down(&clocks_sem);
+	mutex_lock(&clocks_mutex);
 	list_del(&clk->node);
-	up(&clocks_sem);
+	mutex_unlock(&clocks_mutex);
 }
 EXPORT_SYMBOL(clk_unregister);
 

drivers/i2c/busses/i2c-pxa.c

@@ -899,6 +899,12 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
 	struct pxa_i2c *i2c = adap->algo_data;
 	int ret, i;
 
+	/* If the I2C controller is disabled we need to reset it (probably due
+ 	   to a suspend/resume destroying state). We do this here as we can then
+ 	   avoid worrying about resuming the controller before its users. */
+	if (!(ICR & ICR_IUE))
+		i2c_pxa_reset(i2c);
+
 	for (i = adap->retries; i >= 0; i--) {
 		ret = i2c_pxa_do_xfer(i2c, msgs, num);
 		if (ret != I2C_RETRY)
@@ -939,7 +945,9 @@ static struct pxa_i2c i2c_pxa = {
 static int i2c_pxa_probe(struct platform_device *dev)
 {
 	struct pxa_i2c *i2c = &i2c_pxa;
+#ifdef CONFIG_I2C_PXA_SLAVE
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+#endif
 	int ret;
 
 #ifdef CONFIG_PXA27x
@@ -1024,5 +1032,7 @@ static void i2c_adap_pxa_exit(void)
 	return platform_driver_unregister(&i2c_pxa_driver);
 }
 
+MODULE_LICENSE("GPL");
+
 module_init(i2c_adap_pxa_init);
 module_exit(i2c_adap_pxa_exit);

drivers/serial/Makefile

@@ -56,3 +56,4 @@ obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
 obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
+obj-$(CONFIG_SERIAL_AT91) += at91_serial.o